The majority of blockdev filesystems, which do not have a UUID in their
on-disk format, derive f_fsid of statfs(2) from bdev->bd_dev.
Use the same practice for freevxfs.
This will allow reporting fanotify events with fanotify_event_info_fid.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231024121457.3014063-1-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are many "simple" filesystems (*) that report null f_fsid in
statfs(2). Those "simple" filesystems report sb->s_dev as the st_dev
field of the stat syscalls for all inodes of the filesystem (**).
In order to enable fanotify reporting of events with fsid on those
"simple" filesystems, report the sb->s_dev number in f_fsid field of
statfs(2).
(*) For most of the "simple" filesystem refered to in this commit, the
->statfs() operation is simple_statfs(). Some of those fs assign the
simple_statfs() method directly in their ->s_op struct and some assign it
indirectly via a call to simple_fill_super() or to pseudo_fs_fill_super()
with either custom or "simple" s_op.
We also make the same change to efivarfs and hugetlbfs, although they do
not use simple_statfs(), because they use the simple_* inode opreations
(e.g. simple_lookup()).
(**) For most of the "simple" filesystems, the ->getattr() method is not
assigned, so stat() is implemented by generic_fillattr(). A few "simple"
filesystem use the simple_getattr() method which also calls
generic_fillattr() to fill most of the stat struct.
The two exceptions are procfs and 9p. procfs implements several different
->getattr() methods, but they all end up calling generic_fillattr() to
fill the st_dev field from sb->s_dev.
9p has more complicated ->getattr() methods, but they too, end up calling
generic_fillattr() to fill the st_dev field from sb->s_dev.
Note that 9p and kernfs also call simple_statfs() from custom ->statfs()
methods which already fill the f_fsid field, but v9fs_statfs() calls
simple_statfs() only in case f_fsid was not filled and kenrfs_statfs()
overwrites f_fsid after calling simple_statfs().
Link: https://lore.kernel.org/r/20230919094820.g5bwharbmy2dq46w@quack3/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023143049.2944970-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
AT_HANDLE_FID was added as an API for name_to_handle_at() that request
the encoding of a file id, which is not intended to be decoded.
This file id is used by fanotify to describe objects in events.
So far, overlayfs is the only filesystem that supports encoding
non-decodeable file ids, by providing export_operations with an
->encode_fh() method and without a ->decode_fh() method.
Add support for encoding non-decodeable file ids to all the filesystems
that do not provide export_operations, by encoding a file id of type
FILEID_INO64_GEN from { i_ino, i_generation }.
A filesystem may that does not support NFS export, can opt-out of
encoding non-decodeable file ids for fanotify by defining an empty
export_operations struct (i.e. with a NULL ->encode_fh() method).
This allows the use of fanotify events with file ids on filesystems
like 9p which do not support NFS export to bring fanotify in feature
parity with inotify on those filesystems.
Note that fanotify also requires that the filesystems report a non-null
fsid. Currently, many simple filesystems that have support for inotify
(e.g. debugfs, tracefs, sysfs) report a null fsid, so can still not be
used with fanotify in file id reporting mode.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-5-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Similar to the common FILEID_INO32* file handle types, define common
FILEID_INO64* file handle types.
The type values of FILEID_INO64_GEN and FILEID_INO64_GEN_PARENT are the
values returned by fuse and xfs for 64bit ino encoded file handle types.
Note that these type value are filesystem specific and they do not define
a universal file handle format, for example:
fuse encodes FILEID_INO64_GEN as [ino-hi32,ino-lo32,gen] and xfs encodes
FILEID_INO64_GEN as [hostr-order-ino64,gen] (a.k.a xfs_fid64).
The FILEID_INO64_GEN fhandle type is going to be used for file ids for
fanotify from filesystems that do not support NFS export.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Rename the default helper for encoding FILEID_INO32_GEN* file handles to
generic_encode_ino32_fh() and convert the filesystems that used the
default implementation to use the generic helper explicitly.
After this change, exportfs_encode_inode_fh() no longer has a default
implementation to encode FILEID_INO32_GEN* file handles.
This is a step towards allowing filesystems to encode non-decodeable
file handles for fanotify without having to implement any
export_operations.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-3-amir73il@gmail.com
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use new helper acpi_use_parent_companion to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In several drivers devices use the ACPI companion of the parent.
Add a helper for this use case to avoid code duplication.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When adapters are chained in a sparse manner (with intermediate MFD devices,
for instance) the code currently fails to use the correct subclass for
the adapter's bus_lock which leads to false-positive lockdep warnings.
Fix this by walking the entire pedigree of the device and count all
adapters along the way instead of just checking the immediate parent.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add kernel-doc for 'slave' and 'irq' in struct axxia_i2c_dev.
Drop kernel-doc notation ("/**") for static functions since they
are not usually documented with kernel-doc.
Prevents these kernel-doc warnings:
i2c-axxia.c:150: warning: Function parameter or member 'slave' not described in 'axxia_i2c_dev'
i2c-axxia.c:150: warning: Function parameter or member 'irq' not described in 'axxia_i2c_dev'
i2c-axxia.c:172: warning: Function parameter or member 'ns' not described in 'ns_to_clk'
i2c-axxia.c:172: warning: Function parameter or member 'clk_mhz' not described in 'ns_to_clk'
i2c-axxia.c:172: warning: No description found for return value of 'ns_to_clk'
i2c-axxia.c:271: warning: Function parameter or member 'idev' not described in 'axxia_i2c_empty_rx_fifo'
i2c-axxia.c:271: warning: No description found for return value of 'axxia_i2c_empty_rx_fifo'
i2c-axxia.c:303: warning: Function parameter or member 'idev' not described in 'axxia_i2c_fill_tx_fifo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202310181049.Vo62moV1-lkp@intel.com/
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
These should add a hyphen to indicate that it makes a adjective. Fix
them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ALL_INIT_TEXT_SECTIONS and ALL_EXIT_TEXT_SECTIONS are only used in
the macro definition of ALL_TEXT_SECTIONS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ALL_INIT_SECTIONS is defined as follows:
#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Theoretically, we could export conditionally-discarded code sections,
such as .meminit*, if all the users can become modular under a certain
condition. However, that would be difficult to control and such a tricky
case has never occurred.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These symbol patterns were whitelisted to allow them to reference to
functions with the old __devinit and __devexit annotations.
We stopped doing this a long time ago, for example, commit 6f03979051
("Drivers: scsi: remove __dev* attributes.") remove those annotations
from the scsi drivers.
Keep *_ops, *_probe, and *_console, otherwise they will really cause
section mismatch warnings.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Drivers must not reference .meminit* sections, which are discarded
when CONFIG_MEMORY_HOTPLUG=n.
The reason for whitelisting "*driver" in the section mismatch check
was to allow drivers to reference symbols annotated as __devinit or
__devexit that existed in the past.
Those annotations were removed by the following commits:
- 54b956b903 ("Remove __dev* markings from init.h")
- 92e9e6d1f9 ("modpost.c: Stop checking __dev* section mismatches")
Remove the stale whitelist.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We have never used __memexit, __memexitdata, or __memexitconst.
These were unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Convert the pinctrl-based I2C bus demultiplexer Device Tree binding
documentation to json-schema.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
scripts/pahole-flags.sh is executed so many times.
You can confirm it, as follows:
$ cat <<EOF >> scripts/pahole-flags.sh
> echo "scripts/pahole-flags.sh was executed" >&2
> EOF
$ make -s
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
[ lots of repeated lines... ]
This scripts is executed more than 20 times during the kernel build
because PAHOLE_FLAGS is a recursively expanded variable and exported
to sub-processes.
With GNU Make >= 4.4, it is executed more than 60 times because
exported variables are also passed to other $(shell ) invocations.
Without careful coding, it is known to cause an exponential fork
explosion. [1]
The use of $(shell ) in an exported recursive variable is likely wrong
because $(shell ) is always evaluated due to the 'export' keyword, and
the evaluation can occur multiple times by the nature of recursive
variables.
Convert the shell script to a Makefile, which is included only when
CONFIG_DEBUG_INFO_BTF=y.
[1]: https://savannah.gnu.org/bugs/index.php?64746
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
The '%.ko' rule in arch/*/Makefile.postlink does nothing but call the
'true' command.
Remove the unneeded code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Now that vdso_install does not depend on any in-tree build artifact,
it no longer needs a compiler, making no-compiler-targets the same
as no-sync-config-targets.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
With recent block level changes we should never be in a situation where
we hold disk->open_mutex when calling into these helpers. So assert that
in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-6-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blk_report_disk_dead() has the following major callers:
(1) del_gendisk()
(2) blk_mark_disk_dead()
Since del_gendisk() acquires disk->open_mutex it's clear that all
callers are assumed to be called without disk->open_mutex held.
In turn, blk_report_disk_dead() is called without disk->open_mutex held
in del_gendisk().
All callers of blk_mark_disk_dead() call it without disk->open_mutex as
well.
Ensure that it is clear that blk_report_disk_dead() is called without
disk->open_mutex on purpose by asserting it and a comment in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-5-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
disk_check_media_change is mostly called from ->open where it makes
little sense to mark the file system on the device as dead, as we
are just opening it. So instead of calling bdev_mark_dead from
disk_check_media_change move it into the few callers that are not
in an open instance. This avoid calling into bdev_mark_dead and
thus taking s_umount with open_mutex held.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The logic for disk->open_partitions is:
blkdev_get_by_*()
-> bdev_is_partition()
-> blkdev_get_part()
-> blkdev_get_whole() // bdev_whole->bd_openers++
-> if (part->bd_openers == 0)
disk->open_partitions++
part->bd_openers
In other words, when we first claim/open a partition we increment
disk->open_partitions and only when all part->bd_openers are closed will
disk->open_partitions be zero. That should mean that
disk->open_partitions is always > 0 as long as there's anyone that
has an open partition.
So the check for disk->open_partitions should mean that we can never
remove an active partition that has a holder and holder ops set. Assert
that in the code. The main disk isn't removed so that check doesn't work
for disk->part0 which is what we want. After all we only care about
partition not about the main disk.
Link: https://lore.kernel.org/r/20231017184823.1383356-3-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
BLKPG_DEL_PARTITION refuses to delete partitions that still have
openers, i.e., that has an elevated @bdev->bd_openers count. If a device
is claimed by setting @bdev->bd_holder and @bdev->bd_holder_ops
@bdev->bd_openers and @bdev->bd_holders are incremented.
@bdev->bd_openers is effectively guaranteed to be >= @bdev->bd_holders.
So as long as @bdev->bd_openers isn't zero we know that this partition
is still in active use and that there might still be @bdev->bd_holder
and @bdev->bd_holder_ops set.
The only current example is @fs_holder_ops for filesystems. But that
means bdev_mark_dead() which calls into
bdev->bd_holder_ops->mark_dead::fs_bdev_mark_dead() is a nop. As long as
there's an elevated @bdev->bd_openers count we can't delete the
partition and if there isn't an elevated @bdev->bd_openers count then
there's no @bdev->bd_holder or @bdev->bd_holder_ops.
So simply open-code what we need to do. This gets rid of one more
instance where we acquire s_umount under @disk->open_mutex.
Link: https://lore.kernel.org/r/20231016-fototermin-umriss-59f1ea6c1fe6@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-2-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The implementation of bdev holder operations such as fs_bdev_mark_dead()
and fs_bdev_sync() grab sb->s_umount semaphore under
bdev->bd_holder_lock. This is problematic because it leads to
disk->open_mutex -> sb->s_umount lock ordering which is counterintuitive
(usually we grab higher level (e.g. filesystem) locks first and lower
level (e.g. block layer) locks later) and indeed makes lockdep complain
about possible locking cycles whenever we open a block device while
holding sb->s_umount semaphore. Implement a function
bdev_super_lock_shared() which safely transitions from holding
bdev->bd_holder_lock to holding sb->s_umount on alive superblock without
introducing the problematic lock dependency. We use this function
fs_bdev_sync() and fs_bdev_mark_dead().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231018152924.3858-1-jack@suse.cz
Link: https://lore.kernel.org/r/20231017184823.1383356-1-hch@lst.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Coverity has noticed that the printing of error message in
register_cache() uses already freed bdev_handle to get to bdev. In fact
the problem has been there even before commit "bcache: Convert to
bdev_open_by_path()" just a bit more subtle one - cache object itself
could have been freed by the time we looked at ca->bdev and we don't
hold any reference to bdev either so even that could in principle go
away (due to device unplug or similar). Fix all these problems by
printing the error message before closing the bdev.
Fixes: dc893f51d24a ("bcache: Convert to bdev_open_by_path()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231004093757.11560-1-jack@suse.cz
Asked-by: Coly Li <colyli@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert xfs to use bdev_open_by_path() and pass the handle around.
CC: "Darrick J. Wong" <djwong@kernel.org>
CC: linux-xfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-28-jack@suse.cz
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert ocfs2 heartbeat code to use bdev_open_by_dev() and pass the
handle around.
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-26-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert block device handling to use bdev_open_by_dev/path() and pass
the handle around.
CC: linux-nfs@vger.kernel.org
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-25-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert jfs to use bdev_open_by_dev() and pass the handle around.
CC: Dave Kleikamp <shaggy@kernel.org>
CC: jfs-discussion@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-24-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert f2fs to use bdev_open_by_dev/path() and pass the handle around.
CC: Jaegeuk Kim <jaegeuk@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-f2fs-devel@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-23-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert ext4 to use bdev_open_by_dev() and pass the handle around.
CC: linux-ext4@vger.kernel.org
CC: Ted Tso <tytso@mit.edu>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-22-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert erofs to use bdev_open_by_path() and pass the handle around.
CC: Gao Xiang <xiang@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-erofs@lists.ozlabs.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-21-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert btrfs to use bdev_open_by_path() and pass the handle around. We
also drop the holder from struct btrfs_device as it is now not needed
anymore.
CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-20-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert mount code to use bdev_open_by_dev() and propagate the handle
around to bdev_release().
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-19-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert swapping code to use bdev_open_by_dev() and pass the handle
around.
CC: linux-mm@kvack.org
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-18-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
snapshot_test argument is now unused in swsusp_close() and
load_image_and_restore(). Drop it
CC: linux-pm@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-17-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert hibernation code to use bdev_open_by_dev().
CC: linux-pm@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-16-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert iblock and pscsi drivers to use bdev_open_by_path() and pass the
handle around.
CC: target-devel@vger.kernel.org
CC: linux-scsi@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-15-jack@suse.cz
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
