The WARN_ONCE was issued also in cases that had nothing to do with VM_IO
(e.g. if the start address was just a random value and uaccess fails with
-EFAULT).
There are no reports of WARN_ONCE being issued for actual VM_IO cases, so
just drop it and instead add a note to the comment before the function.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
If the index provided by the user is bigger than the mask size, we might do
an out of bound read.
CC: stable@kernel.org
Fixes: 40140eda66 ("media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU")
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Do not turn on the vcr_hack based on the btv->field value.
This was a change in the bttv vb2 conversion that caused
green lines at the bottom of the picture in tvtime.
It was originally added to the vb2 conversion based on
faulty information that without this there would be glitches
in the video. However, later tests suggest that this is a
problem in the utilities used to test this since tvtime
behaves fine.
This patch reverts the bttv driver to the original pre-vb2
behavior w.r.t. vcr_hack.
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The commit in Fixes has removed an fwnode_handle_put() call in the error
handling path of the probe.
Remove the same call from the remove function.
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .set_fmt() handler tries to avoid updating the sensor configuration
when the mode hasn't changed. It does so by comparing both the mode and
the media bus code. While the latter correctly uses the media bus code
stored in the subdev state, the former compares the mode being set with
the active mode, regardless of whether .set_fmt() is called for the
ACTIVE or TRY format. This can lead to .set_fmt() returning early when
operating on TRY formats.
This could be fixed by replacing the mode comparison with width and
height comparisons, using the frame size stored in the subdev state.
However, the optimization that avoids updates to the sensor
configuration is not very useful, and is not commonly found in sensor
drivers. To improve consistency across sensor drivers, it is better, in
addition to being easier, to simply drop it. Do so.
Fixes: e8a5b1df00 ("media: i2c: imx219: Use subdev active state")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When moving the imx219 driver to the subdev active state, commit
e8a5b1df00 ("media: i2c: imx219: Use subdev active state") used the
pad crop rectangle stored in the subdev state to report the crop
rectangle of the active mode. That crop rectangle was however not set in
the state when setting the format, which resulted in reporting an
incorrect crop rectangle to userspace. Fix it.
Fixes: e8a5b1df00 ("media: i2c: imx219: Use subdev active state")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx219_init_cfg() function has stopped operating on the try format
since commit 7e700847b1 ("media: i2c: imx219: Switch from open to
init_cfg"), but a comment in the function wasn't updated. Fix it.
While at it, improve spelling in a second comment in the function.
Fixes: 7e700847b1 ("media: i2c: imx219: Switch from open to init_cfg")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The commit in Fixes has removed an fwnode_handle_put() call in the error
handling path of max9286_v4l2_register().
Remove the same call from max9286_v4l2_unregister().
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CONFIG_VIDEO_DEV is required by other selected symbols. Depend on it.
Link: https://lore.kernel.org/linux-media/20230828085718.3912335-1-sakari.ailus@linux.intel.com
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When opening a directory (opendir(3)) or rewinding it (rewinddir(3)), we
are not holding the directory's inode locked, and this can result in later
attempting to add two entries to the directory with the same index number,
resulting in a transaction abort, with -EEXIST (-17), when inserting the
second delayed dir index. This results in a trace like the following:
Sep 11 22:34:59 myhostname kernel: BTRFS error (device dm-3): err add delayed dir index item(name: cockroach-stderr.log) into the insertion tree of the delayed node(root id: 5, inode id: 4539217, errno: -17)
Sep 11 22:34:59 myhostname kernel: ------------[ cut here ]------------
Sep 11 22:34:59 myhostname kernel: kernel BUG at fs/btrfs/delayed-inode.c:1504!
Sep 11 22:34:59 myhostname kernel: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
Sep 11 22:34:59 myhostname kernel: CPU: 0 PID: 7159 Comm: cockroach Not tainted 6.4.15-200.fc38.x86_64 #1
Sep 11 22:34:59 myhostname kernel: Hardware name: ASUS ESC500 G3/P9D WS, BIOS 2402 06/27/2018
Sep 11 22:34:59 myhostname kernel: RIP: 0010:btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: Code: eb dd 48 (...)
Sep 11 22:34:59 myhostname kernel: RSP: 0000:ffffa9980e0fbb28 EFLAGS: 00010282
Sep 11 22:34:59 myhostname kernel: RAX: 0000000000000000 RBX: ffff8b10b8f4a3c0 RCX: 0000000000000000
Sep 11 22:34:59 myhostname kernel: RDX: 0000000000000000 RSI: ffff8b177ec21540 RDI: ffff8b177ec21540
Sep 11 22:34:59 myhostname kernel: RBP: ffff8b110cf80888 R08: 0000000000000000 R09: ffffa9980e0fb938
Sep 11 22:34:59 myhostname kernel: R10: 0000000000000003 R11: ffffffff86146508 R12: 0000000000000014
Sep 11 22:34:59 myhostname kernel: R13: ffff8b1131ae5b40 R14: ffff8b10b8f4a418 R15: 00000000ffffffef
Sep 11 22:34:59 myhostname kernel: FS: 00007fb14a7fe6c0(0000) GS:ffff8b177ec00000(0000) knlGS:0000000000000000
Sep 11 22:34:59 myhostname kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 11 22:34:59 myhostname kernel: CR2: 000000c00143d000 CR3: 00000001b3b4e002 CR4: 00000000001706f0
Sep 11 22:34:59 myhostname kernel: Call Trace:
Sep 11 22:34:59 myhostname kernel: <TASK>
Sep 11 22:34:59 myhostname kernel: ? die+0x36/0x90
Sep 11 22:34:59 myhostname kernel: ? do_trap+0xda/0x100
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? do_error_trap+0x6a/0x90
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? exc_invalid_op+0x50/0x70
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? asm_exc_invalid_op+0x1a/0x20
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: btrfs_insert_dir_item+0x200/0x280
Sep 11 22:34:59 myhostname kernel: btrfs_add_link+0xab/0x4f0
Sep 11 22:34:59 myhostname kernel: ? ktime_get_real_ts64+0x47/0xe0
Sep 11 22:34:59 myhostname kernel: btrfs_create_new_inode+0x7cd/0xa80
Sep 11 22:34:59 myhostname kernel: btrfs_symlink+0x190/0x4d0
Sep 11 22:34:59 myhostname kernel: ? schedule+0x5e/0xd0
Sep 11 22:34:59 myhostname kernel: ? __d_lookup+0x7e/0xc0
Sep 11 22:34:59 myhostname kernel: vfs_symlink+0x148/0x1e0
Sep 11 22:34:59 myhostname kernel: do_symlinkat+0x130/0x140
Sep 11 22:34:59 myhostname kernel: __x64_sys_symlinkat+0x3d/0x50
Sep 11 22:34:59 myhostname kernel: do_syscall_64+0x5d/0x90
Sep 11 22:34:59 myhostname kernel: ? syscall_exit_to_user_mode+0x2b/0x40
Sep 11 22:34:59 myhostname kernel: ? do_syscall_64+0x6c/0x90
Sep 11 22:34:59 myhostname kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
The race leading to the problem happens like this:
1) Directory inode X is loaded into memory, its ->index_cnt field is
initialized to (u64)-1 (at btrfs_alloc_inode());
2) Task A is adding a new file to directory X, holding its vfs inode lock,
and calls btrfs_set_inode_index() to get an index number for the entry.
Because the inode's index_cnt field is set to (u64)-1 it calls
btrfs_inode_delayed_dir_index_count() which fails because no dir index
entries were added yet to the delayed inode and then it calls
btrfs_set_inode_index_count(). This functions finds the last dir index
key and then sets index_cnt to that index value + 1. It found that the
last index key has an offset of 100. However before it assigns a value
of 101 to index_cnt...
3) Task B calls opendir(3), ending up at btrfs_opendir(), where the VFS
lock for inode X is not taken, so it calls btrfs_get_dir_last_index()
and sees index_cnt still with a value of (u64)-1. Because of that it
calls btrfs_inode_delayed_dir_index_count() which fails since no dir
index entries were added to the delayed inode yet, and then it also
calls btrfs_set_inode_index_count(). This also finds that the last
index key has an offset of 100, and before it assigns the value 101
to the index_cnt field of inode X...
4) Task A assigns a value of 101 to index_cnt. And then the code flow
goes to btrfs_set_inode_index() where it increments index_cnt from
101 to 102. Task A then creates a delayed dir index entry with a
sequence number of 101 and adds it to the delayed inode;
5) Task B assigns 101 to the index_cnt field of inode X;
6) At some later point when someone tries to add a new entry to the
directory, btrfs_set_inode_index() will return 101 again and shortly
after an attempt to add another delayed dir index key with index
number 101 will fail with -EEXIST resulting in a transaction abort.
Fix this by locking the inode at btrfs_get_dir_last_index(), which is only
only used when opening a directory or attempting to lseek on it.
Reported-by: ken <ken@bllue.org>
Link: https://lore.kernel.org/linux-btrfs/CAE6xmH+Lp=Q=E61bU+v9eWX8gYfLvu6jLYxjxjFpo3zHVPR0EQ@mail.gmail.com/
Reported-by: syzbot+d13490c82ad5353c779d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/
Fixes: 9b378f6ad4 ("btrfs: fix infinite directory reads")
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When opening a directory we find what's the index of its last entry and
then store it in the directory's file handle private data (struct
btrfs_file_private::last_index), so that in the case new directory entries
are added to a directory after an opendir(3) call we don't end up in an
infinite loop (see commit 9b378f6ad4 ("btrfs: fix infinite directory
reads")) when calling readdir(3).
However once rewinddir(3) is called, POSIX states [1] that any new
directory entries added after the previous opendir(3) call, must be
returned by subsequent calls to readdir(3):
"The rewinddir() function shall reset the position of the directory
stream to which dirp refers to the beginning of the directory.
It shall also cause the directory stream to refer to the current
state of the corresponding directory, as a call to opendir() would
have done."
We currently don't refresh the last_index field of the struct
btrfs_file_private associated to the directory, so after a rewinddir(3)
we are not returning any new entries added after the opendir(3) call.
Fix this by finding the current last index of the directory when llseek
is called against the directory.
This can be reproduced by the following C program provided by Ian Johnson:
#include <dirent.h>
#include <stdio.h>
int main(void) {
DIR *dir = opendir("test");
FILE *file;
file = fopen("test/1", "w");
fwrite("1", 1, 1, file);
fclose(file);
file = fopen("test/2", "w");
fwrite("2", 1, 1, file);
fclose(file);
rewinddir(dir);
struct dirent *entry;
while ((entry = readdir(dir))) {
printf("%s\n", entry->d_name);
}
closedir(dir);
return 0;
}
Reported-by: Ian Johnson <ian@ianjohnson.dev>
Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/
Fixes: 9b378f6ad4 ("btrfs: fix infinite directory reads")
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When opening a directory for reading it, we set the last index where we
stop iteration to the value in struct btrfs_inode::index_cnt. That value
does not match the index of the most recently added directory entry but
it's instead the index number that will be assigned the next directory
entry.
This means that if after the call to opendir(3) new directory entries are
added, a readdir(3) call will return the first new directory entry. This
is fine because POSIX says the following [1]:
"If a file is removed from or added to the directory after the most
recent call to opendir() or rewinddir(), whether a subsequent call to
readdir() returns an entry for that file is unspecified."
For example for the test script from commit 9b378f6ad4 ("btrfs: fix
infinite directory reads"), where we have 2000 files in a directory, ext4
doesn't return any new directory entry after opendir(3), while xfs returns
the first 13 new directory entries added after the opendir(3) call.
If we move to a shorter example with an empty directory when opendir(3) is
called, and 2 files added to the directory after the opendir(3) call, then
readdir(3) on btrfs will return the first file, ext4 and xfs return the 2
files (but in a different order). A test program for this, reported by
Ian Johnson, is the following:
#include <dirent.h>
#include <stdio.h>
int main(void) {
DIR *dir = opendir("test");
FILE *file;
file = fopen("test/1", "w");
fwrite("1", 1, 1, file);
fclose(file);
file = fopen("test/2", "w");
fwrite("2", 1, 1, file);
fclose(file);
struct dirent *entry;
while ((entry = readdir(dir))) {
printf("%s\n", entry->d_name);
}
closedir(dir);
return 0;
}
To make this less odd, change the behaviour to never return new entries
that were added after the opendir(3) call. This is done by setting the
last_index field of the struct btrfs_file_private attached to the
directory's file handle with a value matching btrfs_inode::index_cnt
minus 1, since that value always matches the index of the next new
directory entry and not the index of the most recently added entry.
[1] https://pubs.opengroup.org/onlinepubs/007904875/functions/readdir_r.html
Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following debug output was observed while testing CXL
cxl_core:cxl_walk_cel:721: cxl_mock_mem cxl_mem.0: Opcode 0x4300 unsupported by driver
opcode 0x4300 (Get Poison) is supported by the driver and the mock
device supports it. The logic should be checking that the opcode is
both not poison and not security.
Fix the logic to allow poison and security commands.
Fixes: ad64f5952c ("cxl/memdev: Only show sanitize sysfs files when supported")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230903-cxl-cel-fix-v1-1-e260c9467be3@intel.com
[cleanup cxl_walk_cel() to centralized "enabled" checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some devices are reporting controller ready mode support, but return 0
for CRTO. These devices require a much higher time to ready than that,
so they are failing to initialize after the driver starter preferring
that value over CAP.TO.
The spec requires that CAP.TO match the appropritate CRTO value, or be
set to 0xff if CRTO is larger than that. This means that CAP.TO can be
used to validate if CRTO is reliable, and provides an appropriate
fallback for setting the timeout value if not. Use whichever is larger.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863
Reported-by: Cláudio Sampaio <patola@gmail.com>
Reported-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Felix Yan <felixonmars@archlinux.org>
Based-on-a-patch-by: Felix Yan <felixonmars@archlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Some SoCs have in built firmware support to classify current running
workload and pass to OS for making power management decisions.
This test program waits for notification of workload type change
and prints. This program can be used to test this feature and also
allows other user space programs to use as a reference.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On thermal device interrupt, if the interrupt is generated for passing
workload hint, call the callback to pass notification to the user
space.
First call proc_thermal_check_wt_intr() to check interrupt, if this
callback returns true, wake the IRQ thread to call
proc_thermal_wt_intr_callback() to notify user space.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Prior to Meteor Lake processor generation, user space can pass workload
type request to the firmware. Then firmware can optimize power based on
the indicated workload type. User space also uses workload type requests
to implement its own heuristics.
The firmware in Meteor Lake processor generation is capable of predicting
workload type without software help.
To avoid duplicate processing, add a sysfs interface allowing user space
to obtain the workload hint from the firmware instead of trying to
predict the workload type by itself.
This workload hint is passed from the firmware via MMIO offset 0x5B18 of
the processor thermal PCI device. Before workload hints can be produced by
the firmware, it needs to be configured via a mailbox command. This
mailbox command turns ON the workload hint and it allows to program a
notification delay to control the rate of notifications.
The notification delay can be changed from user space vis sysfs.
Attribute group 'workload_hint' in sysfs is used for implementing the
workload hints interface between user space and the kernel.
It contains the following attributes:
workload_type_enable:
Enables/disables workload type hints from the firmware.
notification_delay_ms:
Notification delay in milliseconds.
workload_type_index:
The current workload type index predicted by the firmware (see
the documentation changes below for supported index values and
their meaning).
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits, documentation edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Meteor Lake processor supports firmware hints for predicting workload
type. So, remove support for passing workload hints to the firmware.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are issues in using MSI interrupts for processor thermal device.
The support is not consistent across generations. But the legacy PCI
interrupts work on all current generations.
Hence always use legacy PCI interrupts by default, instead of MSI.
Add a module param to use of MSI, so that MSI can be still used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some features like workload type prediction and power floor events
require interrupt support to avoid polling. Here interrupts are enabled
and disabled via sending mailbox commands. The mailbox command ID is
0x1E for read and 0x1F for write.
The interrupt configuration will require mutex protection as it involves
read-modify-write operation. Since mutex are already used in the mailbox
read/write functions: send_mbox_write_cmd() and send_mbox_read_cmd(),
there will be double locking. But, this can be avoided by moving mutexes
from mailbox read/write processing functions to the callers:
processor_thermal_send_mbox_[read|write]_cmd().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Adjust subject, fix up computation ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The processor thermal mailbox is used for workload type request and
also in the processor thermal RFIM module. So, move the workload type
request code to its own module from the current processor thermal
mailbox module.
processor_thermal_mailbox.c contains only mailbox read/write related
source code. The source related to workload_types requests is moved to
a module processor_thermal_wt_req.c.
In addition
- Rename PROC_THERMAL_FEATURE_MBOX to PROC_THERMAL_FEATURE_WT_REQ.
- proc_thermal_mbox_add(), which adds workload type sysfs attribute group
is renamed to proc_thermal_wt_req_add().
- proc_thermal_mbox_remove() is renamed to proc_thermal_wt_req_remove().
While here, resolve check patch warnings for 100 columns for only modified
lines.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit bc840ea5f9 ("thermal: core: Do not handle trip points with
invalid temperature") added a check for invalid temperature to the
disabled trip point check in handle_thermal_trip(), but that check was
added at a point when the trip structure has not been initialized yet.
This may cause handle_thermal_trip() to skip a valid trip point in some
cases, so fix it by moving the check to a suitable place, after
__thermal_zone_get_trip() has been called to populate the trip
structure.
Fixes: bc840ea5f9 ("thermal: core: Do not handle trip points with invalid temperature")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "sb_kern_mount" hook has implementation registered in SELinux.
Looking at the function implementation we observe that the "sb"
parameter is not changing.
Mark the "sb" parameter of LSM hook security_sb_kern_mount() as "const"
since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Three LSMs register the implementations for the 'bprm_committed_creds()'
hook: AppArmor, SELinux and tomoyo. Looking at the function
implementations we may observe that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committed_creds() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull MD fixes from Song:
"These commits fix a bugzilla report [1] and some recent issues in 6.5
and 6.6.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217798"
* tag 'md-fixes-20230914' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Put the right device in md_seq_next
md/raid1: fix error: ISO C90 forbids mixed declarations
md: fix warning for holder mismatch from export_rdev()
md: don't dereference mddev after export_rdev()
This test relies on bpf_testmod, so skip it if the module is not available.
Fixes: aa3d65de4b ("bpf/selftests: Test fentry attachment to shadowed functions")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
Running "make modules_install" may fail with
make[2]: execvp: /bin/sh: Argument list too long
if many modules are built and INSTALL_MOD_PATH is long. This is because
scripts/Makefile.modinst creates all directories with one mkdir command.
Use $(foreach ...) instead to prevent an excessive argument list.
Fixes: 2dfec887c0 ("kbuild: reduce the number of mkdir calls during modules_install")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package
and linux-headers Deb package"), the kernel-devel RPM package and
linux-headers Deb package are broken.
I double-quoted the $(find ... -type d), which resulted in newlines
being included in the argument to the outer find comment.
find: 'arch/arm64/include\narch/arm64/kvm/hyp/include': No such file or directory
The outer find command is unneeded.
Fixes: fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and linux-headers Deb package")
Reported-by: Karolis M <k4rolis@protonmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
If there are multiple arrays in system and one mddevice is marked
with MD_DELETED and md_seq_next() is called in the middle of removal
then it _get()s proper device but it may _put() deleted one. As a result,
active counter may never be zeroed for mddevice and it cannot
be removed.
Put the device which has been _get with previous md_seq_next() call.
Cc: stable@vger.kernel.org
Fixes: 12a6caf273 ("md: only delete entries from all_mddevs when the disk is freed")
Reported-by: AceLan Kao <acelan@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217798
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230914152416.10819-1-mariusz.tkaczyk@linux.intel.com
In lockstep mode following is TCM address map:
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 |
Current driver keeps single TCM carveout in lockstep mode
as ATCM and BTCM addresses form contiguous memory region.
Although the addresses are contiguous, it is not same type
of memory. ATCM typically holds interrupt or exception code
that must be accessed at high speed. BTCM typically holds
a block of data for intensive processing, such as audio or
video processing. As both are different types of memory,
they should be allocated as different carveout. This patch
is fixing TCM carveout allocation in lockstep mode.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20230913024323.2768114-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vSvh
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
Magnus Karlsson says:
====================
seltests/xsk: various improvements to xskxceiver
This patch set implements several improvements to the xsk selftests
test suite that I thought were useful while debugging the xsk
multi-buffer code and tests. The largest new feature is the ability to
be able to execute a single test instead of the whole test suite. This
required some surgery on the current code, details below.
Anatomy of the path set:
1: Print useful info on a per packet basis with the option -v
2: Add a timeout in the transmission loop too. We only used to have
one for the Rx thread, but Tx can lock up too waiting for
completions.
3: Add an option (-m) to only run the tests (or a single test with a
later patch) in a single mode: skb, drv, or zc (zero-copy).
4-5: Preparatory patches to be able to specify a test to run. Need to
define the test names in a single structure and their entry
points, so we can use this when wanting to run a specific test.
6: Adds a command line option (-l) that lists all the tests.
7: Adds a command line option (-t) that runs a specific test instead
of the whole test suite. Can be combined with -m to specify a
single mode too.
8: Use ksft_print_msg() uniformly throughout the tests. It was a mix
of printf() and ksft_print_msg() before.
9: In some places, we failed the whole test suite instead of a single
test in certain circumstances. Fix this so only the test in
question is failed and the rest of the test suite continues.
10: Display the available command line options with -h
v3 -> v4:
* Fixed another spelling error in patch #9 [Maciej]
* Only allow the actual strings for the -m command [Maciej]
* Move some code from patch #7 to #3 [Maciej]
v2 -> v3:
* Drop the support for environment variables. Probably not useful. [Maciej]
* Fixed spelling mistake in patch #9 [Maciej]
* Fail gracefully if unsupported mode is chosen [Maciej]
* Simplified test run loop [Maciej]
v1 -> v2:
* Introduce XSKTEST_MODE env variable to be able to set the mode to
use [Przemyslaw]
* Introduce XSKTEST_ETH env variable to be able to set the ethernet
interface to use by introducing a new patch (#11) [Magnus]
* Fixed spelling error in patch #5 [Przemyslaw, Maciej]
* Fixed confusing documentation in patch #10 [Przemyslaw]
* The -l option can now be used without being root [Magnus, Maciej]
* Fixed documentation error in patch #7 [Maciej]
* Added error handling to the -t option [Maciej]
* -h now displayed as an option [Maciej]
Thanks: Magnus
====================
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-1-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the -h option to display all available command line options
available for test_xsk.sh and xskxceiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a number of places at en error, exit_with_error() is called that
terminates the whole test suite. This is not always desirable as it
would be more logical to only fail that test and then go along with
the other ones. So change this in a number of places in which I
thought it would be more logical to just fail the test in
question. Examples of this are in code that is only used by a single
test.
Also delete a pointless if-statement in receive_pkts() that has an
exit_with_error() in it. It can never occur since the return value is
an unsigned and the test is for less than zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use ksft_print_msg() instead of printf() and fprintf() in all places
as the ksefltests framework is being used. There is only one exception
and that is for the list-of-tests print out option, since no tests are
run in that case.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a command line option to be able to run a single test. This option
(-t) takes a number from the list of tests available with the "-l"
option. Here are two examples:
Run test number 2, the "receive single packet" test in all available modes:
./test_xsk.sh -t 2
Run test number 21, the metadata copy test in skb mode only
./test_xsh.sh -t 21 -m skb
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a command line option (-l) that lists all the tests. The number
before the test will be used in the next commit for specifying a
single test to run. Here is an example of the output:
Tests:
0: SEND_RECEIVE
1: SEND_RECEIVE_2K_FRAME
2: SEND_RECEIVE_SINGLE_PKT
3: POLL_RX
4: POLL_TX
5: POLL_RXQ_FULL
6: POLL_TXQ_FULL
7: SEND_RECEIVE_UNALIGNED
:
:
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Declare the test names statically in a struct so that we can refer to
them when adding the support to execute a single test in the next
commit. Before this patch, the names of them were not declared in a
single place which made it not possible to refer to them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prepare for the capability to be able to run a single test by moving
all the tests to their own functions. This function can then be called
to execute that test in the next commit.
Also, the tests named RUN_TO_COMPLETION_* were not named well, so
change them to SEND_RECEIVE_* as it is just a basic send and receive
test of 4K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add an option -m on the command line that allows the user to run the
tests in a single mode instead of all of them. Valid modes are skb,
drv, and zc (zero-copy). An example:
To run test suite in drv mode only:
./test_xsk.sh -m drv
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a timeout for the transmission thread. If packets are not
completed properly, for some reason, the test harness would previously
get stuck forever in a while loop. But with this patch, this timeout
will trigger, flag the test as a failure, and continue with the next
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print info about every packet in verbose mode, both for Tx and
Rx. This is useful to have when a test fails or to validate that a
test is really doing what it was designed to do. Info on what is
supposed to be received and sent is also printed for the custom packet
streams since they differ from the base line. Here is an example:
Tx addr: 37e0 len: 64 options: 0 pkt_nb: 8
Tx addr: 4000 len: 64 options: 0 pkt_nb: 9
Rx: addr: 100 len: 64 options: 0 pkt_nb: 0 valid: 1
Rx: addr: 1100 len: 64 options: 0 pkt_nb: 1 valid: 1
Rx: addr: 2100 len: 64 options: 0 pkt_nb: 4 valid: 1
Rx: addr: 3100 len: 64 options: 0 pkt_nb: 8 valid: 1
Rx: addr: 4100 len: 64 options: 0 pkt_nb: 9 valid: 1
One pointless verbose print statement is also deleted and another one
is made clearer.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the allocation of the intermediate and
HW buffers from the encoder's .atomic_enable callback, to the plane's
.atomic_check callback.
This was suggested by Maxime Ripard, because drivers aren't allowed to
fail after the drm_atomic_helper_swap_state() function has been called.
And the encoder's .atomic_enable happens after the new atomic state has
been swapped, so allocations (that can fail) shouldn't be done there.
But the HW buffer isn't really tied to the plane's state. It has a fixed
size that only depends on the (also fixed) display resolution defined in
the Device Tree Blob.
That buffer can be considered part of the CRTC state, and for this reason
makes more sense to do its allocation in the CRTC .atomic_check callback.
The other allocated buffer (used to store a conversion from the emulated
XR24 format to the native R1 format) is part of the plane's state, since
it will be optional once the driver supports R1 and allows user-space to
set that pixel format.
So let's keep the allocation for it in the plane's .atomic_check callback,
this can't be moved to the CRTC's .atomic_check because changing a format
does not trigger a CRTC mode set.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdWv_QSatDgihr8=2SXHhvp=icNxumZcZOPwT9Q_QiogNQ@mail.gmail.com/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913052938.1114651-1-javierm@redhat.com
For easier maintenance order the included headers in qcom_scm.c
alphabetically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230913192826.36187-2-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'extern' specifier in front of a function declaration has no effect.
Remove all of them from the qcom-scm header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230913192826.36187-1-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are several PMICs with GPIO nodes and one of the nodes referenced
other's in gpio-ranges which could result in deferred-probes like:
qcom-spmi-gpio c440000.spmi:pmic@2:gpio@8800: can't add gpio chip
Reported-by: Brian Masney <bmasney@redhat.com>
Closes: https://lore.kernel.org/all/ZN5KIlI+RDu92jsi@brian-x1/
Fixes: e5a893a7ce ("arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230818135538.47481-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is spurious to bail-out on a wait_for_completion_timeout() call that
does NOT timeout.
Reverse the logic to return -ETIMEDOUT instead, in case of tiemout.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/2ed01020fa8a135c36dbaa871095ded47d926507.1676464968.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>