Extend the RPPX1 driver to allow setting the black level measurement
and gain configuration. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the histogram measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the exposure measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the white balance gain
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the white balance measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The Renesas R-Car ISP block consists of two different IP blocks, one
CSI-2 Channel Selector (CSISP) and one traditional ISP for image
operation (ISPCORE). The R-Car ISP driver currently supports the CSISP
functionality as part of the video capture pipeline, this change adds
support for the ISPCORE functionality.
The ISPCORE functionality is further split in two parts, a Renesas
specific part and a Dream Chip Real-time Pixel Processor IP part
(RPPX1). The Renesas part deals with I/O to/from the block while the
RPPX1 part deals with the actual ISP functions.
The RPPX1 functionality is implemented in a support framework (DCT
RPPX1) as this block can be used by different vendors or setups. This
change deals with the Renesas part of exposing the V4L2 elements needed
for a user-space interface to the RPPX1 and deals with the DMA to/from
the RPP block. It also facilitates the user-space V4L2 API to allow
configuring the RPPX1 using the DCT RPPX1 support framework.
The functionality exposed are one input video device where RAW bayer
frames can be queued for processing, one output video device where the
debayerd image can be read as either ABGR32 or NV16M format. Further
more a video device to queue the image processing parameters to
configure the RPPX1 IPS as well as a video device to read statistics
about the processed image is available.
There is no change in the operation of the CSISP functionality.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[ VSPX interfacing + locking sanitizing ]
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a framework driver for Dreamchip RPPX1 ISP. The driver aims to
provide a framework for other V4L2 based drivers to drive the RPPX1
functionality. The reason for this split is that the RPPX1 IP itself do
not provide any DMA engines to drive data to/from the device, instead it
depends on other IP blocks to implement these features.
While the peripherals around the RPPX1 ISP used in different designs and
by different vendors are different the RPPX1 core itself is the same.
For this reason the framework solution to be able to split the Dreamchip
RPPX1 driver from vendors usage of it have been picked in hope to reduce
duplication of the common parts.
The design is to try and keep the surface of this framework as small as
possible. The intention of this change is to be able to fill all needs
of this.
* Two functions to create and destroy a RPPX1 instance, rppx1_create()
and rppx1_destory(). These are intended to be called in the users
probe and remove code paths.
* Two functions to start and stop the RPPX1 processing, rppx1_start()
and rppx1_stop(). These are intended to be called in the users
stream on and stream off code paths.
* One function to ask the RPPX1 to process parameters buffer prepared
by user space, rppx1_params(). The intention is to call this
function when the parameter buffer is queued to the V4L2 driver and
the result stored by the driver until the time it needs to be
written to the RPPX1. It's the users responsibility to write it
either using MMIO or other means.
* One function to fill in a statistic buffer based on the current
status of the RPPX1, rppx1_stats_fill_isr(). The intention is that
the user call's this in its interrupt handler when it knows the
RPPX1 is done processing a frame.
* One function to ack and retrieve the interrupts generated by the
RPPX1, rppx1_interrupt(). The intention is to call this function
when the users interrupt handler detects the RPPX1 have raised and
interrupt. There is no need for the user to understand, or act, on
the actual RPPX1 interrupt, but it can if it wants too.
The initial support in the framework is limited and do not implement any
ISP processing algorithms other then configuring the RPPX1 to process
any Bayer (8-, 10, or 12-bit) image and produce either a RGB or YUYV
output. It do however probe all function blocks of the RPPX1 and provide
an interface to interact with both parameter and statistic bufferers.
The user of the framework will not change as algorithms for the
different function blocks of the ISP are being added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add the scaffolding for the parameters and statistics buffers for
Dreamchip RPPX1. The parameters for each ISP function block will be
added together with the logic for it.
In addition to the scaffolding add a common struct that describes the
measurement window. This struct is not specific to any block and will
used by many of them.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
[Niklas: Commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Register V4L2 metadata fourcc codes for the Dreamchip RPP-X1 ISP
parameters and statistics buffers. These formats are used by the driver
to exchange ISP configuration and 3A statistics with userspace through
the extensible parameters framework.
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add two helper functions to v4l2-isp to handle statistics:
- v4l2_isp_stats_init_buffer() to initialize a statistics buffer
- v4l2_isp_stats_init_block() to initialize a statistics block in the
next available memory location of a buffer
The v4l2_isp_stats_init_buffer() resets the data size counter of the
buffer and initializes its 'version' field.
The v4l2_isp_stats_init_block() helper accepts the type of the stats
block about to be populated, an array of per-block-type information and
the maximum size of the v4l2-isp buffer. If enough space for the new
block is available, the function increments the
v4l2_isp_buffer.data_size counter, initializes the new stats block
header and returns a pointer to the block for the driver to populate it.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Use the newly introduced per-block validation in v4l2-isp framework to
implement a validation callback for the AWB and AE configuration blocks
to make sure the configured metering zones do not exceed the hardware
capabilities.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Drivers are expected to provide to the helper function
v4l2_isp_params_validate_buffer() a list of 'struct
v4l2_isp_params_block_type_info' entries, one for each supported ISP block.
The type 'struct v4l2_isp_params_block_type_info' so far only contained the
expected block size for the core framework to validate the declared block
size against the expected one.
For some blocks, drivers might want to implement more precise per-block
validations. Add a function pointer member to 'struct
v4l2_isp_params_block_type_info' to allow drivers to register a callback
and call it from the core framework during validation.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rename v4l2_isp_params_buffer_size() to v4l2_isp_buffer_size() to
support statistics.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rework the userspace-api documentation of V4L2 ISP to support
statistics.
Update all occurences of 'v4l2_isp_param' types to match the uAPI
changes and add a section to document the statistics serialization
format.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Update on uAPI changes]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the v4l2-isp extensible format introduced for isp parameters buffers
to the support buffers of ISP statistic.
Like for ISP configuration purpose, that will help supporting various ISP
hardware versions reporting different statistics data with less impact on
userspace.
Rename all 'v4l2_isp_params' types to generic 'v4l2_isp' types to
prepare to use them for statistics as well and maintain the existing
types for compatibility with existing userspace only.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Rework to remove 'v4l2_isp_stats' and unify types]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Each int3472_gpio_map entry currently maps exactly one ACPI HID to a
GPIO quirk. As more sensors needing the same quirk are identified, this
means adding a full duplicate table entry per HID, differing only in
the HID string, which does not scale.
Change int3472_gpio_map::hid to a NULL-terminated hids array so a
single entry can match any number of ACPI HIDs, letting new HIDs be
added to the relevant array instead of duplicating quirk entries.
Cc: linux-media@vger.kernel.org
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Tested-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The HM1092 is a mono IR sensor used for face unlock on Intel IPU6 and
IPU7 laptops. Without an entry here the sensor endpoint is built with no
link-frequencies property, the driver rejects every mode and the sensor
never binds.
Two frequencies are listed because the sensor is driven from a different
external clock depending on the platform, with the PLL programmed to
match: 180480000 Hz on Dell (19.2 MHz EXTCLK) and 180000000 Hz on ASUS
(24 MHz).
Assisted-by: Claude:claude-opus-5
Signed-off-by: Jake Steinman <j@metarealtyinc.ca>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
There are a few issues here:
1) After we assign:
chan = dma_request_chan(&pdev->dev, "tx");
Then the error paths need to clean up before returning. The first
error path does a direct return.
2) The error paths check "dcmi->mdma_chan" but that is not assigned
until later so it results in memory leaks. Test "mdma_chan"
instead.
3) The error handling calls dma_release_channel(dcmi->dma_chan) before
"dcmi->dma_chan" has been assigned which leads to a NULL pointer
dereference. Use the "chan" variable instead.
I also moved the call to dma_release_channel() after the call to
dma_release_channel() so it mirrors the allocation code better.
Fixes: bc901885fa ("media: stm32: dcmi: perform dmaengine_slave_config at probe")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The exposure and vertical blanking writes pass the address of the local
ret variable to cci_write() as its error pointer, but there is no earlier
error to propagate: each case is a single standalone write, like the other
controls in the same switch that already pass NULL. In the exposure case
ret is still uninitialized, so a non-zero stack value makes cci_write()
return early without programming the register, and the control write
reports a bogus status. The vertical blanking case is benign today because
ret is zero there, but the construct is equally wrong.
Pass NULL as the error pointer in both cases.
Fixes: be1589e567 ("media: i2c: imx471: Add Sony IMX471 image sensor driver")
Suggested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The ISPIF_VFE_m_RDI_INTF_n_PACK_CFG_0_CID_c_PLAIN() macro
declares a parameter named 'c' but uses 'cid' in the macro
body instead.
Rename the parameter to match the identifier used in the
macro body and silence the checkpatch warning:
WARNING: Argument 'c' is not used in function-like macro
No functional change intended.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Shikra contains the same Camera Subsystem IP as QCM2290. Document the
platform-specific compatible string, using qcom,qcm2290-camss as
fallback.
Unlike QCM2290, Shikra omits the CDM and OPE blocks, requiring only a
single IOMMU context bank instead of four.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The iris encoder driver was not sending
HFI_PROP_TIME_DELTA_BASED_RATE_CONTROL to the firmware during encoder
initialization. Without this property, the firmware defaults to
time-delta-based rate control (enabled), which calculates the output
bitrate from actual frame timing rather than following the configured
bitrate target.
This caused variable bitrate (VBR) encoding to produce ~5x configured
bitrate. For example, with video_bitrate=896000 (896 Kbps), the output
is ~4.4 Mbps instead of the expected ~896 Kbps.
Time-delta-based rate control is designed for variable frame rate (VFR)
scenarios where the encoder adapts to actual frame timing. However, when
an application explicitly configures a bitrate target, the firmware must
follow that target regardless of frame timing.
Fix this by adding the TIME_DELTA_BASED_RC capability with a default value
of 0 (disabled) and sending HFI_PROP_TIME_DELTA_BASED_RATE_CONTROL = 0 to
the firmware during stream-on, allowing the firmware to use the configured
bitrate as the target.
Signed-off-by: Gourav Kumar <gouravk@qti.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for the Milos Iris codec. This only supports the variant
found on the SM7635-AB that has half of it's pipes disabled via efuse.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add binding for Qualcomm Milos Iris video codec.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Some Iris platforms support both Gen1 and Gen2 HFI firmware images.
Update the firmware loading logic to handle this generically by
preferring Gen2 when available, while safely falling back to Gen1
when required.
The firmware loading logic is updated with the following priority:
1. Device Tree (`firmware-name`): If specified, load unconditionally.
2. Gen2 default : If no DT override exists, select the Gen2 firmware
descriptor when present and attempt to load the corresponding
firmware image.
3. Gen1 Fallback: If loading the Gen2 firmware fails and a Gen1
descriptor is available, retry with the Gen1 firmware image.
When a platform provides both Gen1 and Gen2 firmware descriptors and the
firmware is loaded via a DT override, the driver detects the
firmware generation at runtime before authentication by inspecting
the firmware data. The firmware is classified as Gen2 if the
QC_IMAGE_VERSION_STRING starts with "vfw" or matches the
"video-firmware.N.M" format with N >= 2.
If a Gen1 firmware image is detected in this case, the driver switches
to the Gen1 firmware descriptor and associated platform data so that
the correct HFI implementation is used.
This change makes firmware generation detection platform‑agnostic,
preserves DT overrides, prefers newer Gen2 firmware when available,
and maintains compatibility with platforms that only support Gen1.
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add __counted_by() annotations to flexible array members:
- hfi_capabilities::data, counted by num_capabilities
- hfi_profile_level_supported::profile_level, counted by profile_count
- hfi_resource_ocmem_requirement_info::requirements, counted by num_entries
This improves run-time bounds checking via CONFIG_UBSAN_BOUNDS and
compile-time object size resolution via __builtin_dynamic_object_size().
Assisted-by: Claude:claude-opus-4
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The IRQ is registered as a threaded IRQ.
Using disable_irq_nosync() in iris_vpu_power_off() does not wait
for an already queued threaded IRQ handler to complete before
returning.
As a result, a threaded IRQ handler may still run after the VPU has
been powered down and access hardware registers after power-off.
Replace disable_irq_nosync() with disable_irq() so the power-off path
waits for any in-flight threaded IRQ handler to complete before
returning.
Fixes: bb8a95aa03 ("media: iris: implement power management")
Cc: stable@vger.kernel.org
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Initialize the managed OPP pointer at declaration rather than
assigning it in a separate statement.
This avoids a checkpatch warning about a potentially uninitialized
managed pointer.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Check the return value of pm_runtime_resume_and_get() in
iris_core_deinit().
If runtime PM resume fails, skip hardware power-off operations but
still perform software teardown and state transition. Also skip the
corresponding pm_runtime_put_sync() call to avoid unbalanced runtime
PM references.
Fixes: bb8a95aa03 ("media: iris: implement power management")
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
commit 66c744e28b ("media: venus: assign unique bus_info strings for
encoder and decoder") introduced the naming convention
plat:node-addr:video-codec{enc|dec}. Right now Iris does not replicate this
naming convention.
When we do v4l2-ctrl --list -devices we see:
Iris Decoder (platform:aa00000.video-codec):
/dev/video0
/dev/video1
Enumerate the bus_info field of the capabilities structure for namespace
parity and appropriate differentiation:
Iris Decoder (plat:aa00000.video-codec:dec):
/dev/video0
Iris Encoder (plat:aa00000.video-codec:enc):
/dev/video1
Fixes: 5ad964ad56 ("media: iris: Initialize and deinitialize encoder instance structure")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
iris_destroy_internal_buffer() is guaranteed to succeed and never
reports an error. Returning an int is misleading and forces callers to
handle a meaningless status value. Convert it to return void to match
its behavior and simplify callers.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Without the break the AV1 case falls through, risking unintended behaviour
if new cases are added after it.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
HFI_PROP_OPB_ENABLE/iris_hfi_gen2_set_opb_enable appeared twice in the
dispatch table, causing the property to be sent to firmware twice on every
config-params call.
Fixes: 2af481a459 ("media: iris: Define AV1-specific platform capabilities and properties")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Fold the ternary initialiser directly into the variable declaration,
removing the dead store that was immediately overwritten.
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
iris_allow_cmd() incorrectly checks a sub‑state flag using a logical
equality comparison. Since sub_state is a bitmask, this allows STOP to
pass when IRIS_INST_SUB_DRAIN is set alongside other bits, violating the
intended drain semantics. Fix this by using a proper bitmask test.
Fixes: d09100763b ("media: iris: add support for drain sequence")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Internal buffer table dispatch is duplicated across multiple Iris code
paths, which is error‑prone and makes future changes harder to reason
about.
Consolidate the buffer dispatch logic into a single helper so that table
selection is defined in exactly one place and keep call sites minimal.
No functional change intended.
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The consumed size is computed after the loop using the num_planes value
from the last iteration for all entries. When entries have different
plane counts, this produces an incorrect total.
Accumulate the actual size during the loop instead.
Fixes: 9edaaa8e3e ("media: venus: hfi_parser: refactor hfi packet parsing logic")
Cc: stable@vger.kernel.org
Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
parse_caps() and parse_alloc_mode() return only the size of their fixed
header fields, excluding the flexible array payload. hfi_parser() uses
this return value to advance through the firmware response buffer, so
underreporting causes parser desynchronization.
Return the full consumed size (header + entries), matching the correct
pattern used by parse_profile_level().
Fixes: 9edaaa8e3e ("media: venus: hfi_parser: refactor hfi packet parsing logic")
Cc: stable@vger.kernel.org
Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add hfi_id to gen1 encoder GOP_SIZE cap and replace the set function,
remove the redundant INTRA_PERIOD cap.
Fixes: d22037f3fd ("media: iris: Set platform capabilities to firmware for encoder video device")
Reviewed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Use pm_runtime_resume_and_get() in iris_enable_power_domains()
to avoid leaking a runtime PM usage count on failure.
Also ensure pm_runtime_put_sync() is always called in
iris_disable_power_domains(), even when iris_opp_set_rate()
fails, so runtime PM references remain balanced.
Fixes: bb8a95aa03 ("media: iris: implement power management")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The state‑change debug log in iris_inst_change_state() always prints the
same value for the old and new state, rendering it useless for
debugging. This happens because the state is updated before the log is
emitted.
Log the transition before updating the state so the previous value is
preserved, consistent with the existing sub‑state handling.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The Samsung Galaxy Book5 Pro 360 (960QHA) has an upside-down mounted
OV02E10 sensor. The 180 degree rotation is reported in neither the SSDB
nor the _PLD for the sensor (both report a rotation of 0 degrees), so
the image is rendered upside-down in userspace.
Add a DMI quirk entry for this laptop so that the sensor fwnode gets a
"rotation" property of 180 and userspace (e.g. libcamera) can
compensate.
Tested on the Galaxy Book5 Pro 360: with the sensor reporting
V4L2_CID_CAMERA_SENSOR_ROTATION = 180 (verified with an equivalent
local sensor-driver quirk), libcamera renders the image upright.
Signed-off-by: Mihail Antsev <mihail.antcev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The link frequency, retrieved in cvs_csi_enable_streams(), is stored in
the icvs structure to then be used right after in csi_set_link_cfg(),
called only from the same function. Pass it as a function parameter
instead to improve readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
In mt9t112_probe(), the clock error check after devm_v4l2_sensor_clk_get()
calls PTR_ERR(priv->clk) unconditionally, before testing IS_ERR().
On a successful lookup, priv->clk is a valid pointer and calling PTR_ERR()
on it is incorrect API usage. While the comparison against -ENOENT happens
to be harmless in practice (valid kernel pointers never fall in the error
range), this is still a violation of the IS_ERR()/PTR_ERR() contract that
can mislead readers.
Restructure the check to guard PTR_ERR() inside IS_ERR(), using the
simpler != -ENOENT form to avoid an unnecessary else clause.
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The migration to CCI helpers made V4L2_CID_FLASH_DURATION write the
requested duration directly to OV9282_REG_STROBE_FRAME_SPAN, dropping
the conversion from microseconds to the register value.
This made flash strobes too long and produced overly bright frames.
Restore the missing calculation so flash duration is programmed
correctly again.
Fixes: 273f52f3cb ("media: i2c: ov9282: Convert to CCI register access helpers")
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
isys_notifier_init() initialises a v4l2 async notifier and then, for
each CSI-2 port, adds a remote sensor subdev to the notifier's
waiting_list via v4l2_async_nf_add_fwnode_remote(), which allocates a
sensor_async_sd descriptor and takes a fwnode reference.
If parsing or adding a later port fails, the code jumps to the
"err_parse" label, which only drops the current endpoint fwnode
reference and returns, without calling v4l2_async_nf_cleanup(). Any
descriptors already added to the notifier for earlier ports are
therefore leaked, and the caller's error path does not clean up the
notifier either.
Call v4l2_async_nf_cleanup() on the error path, matching the cleanup
already performed when v4l2_async_nf_register() fails. This is safe as
the notifier is always initialised before the loop is entered.
Fixes: a516d36bdc ("media: staging/ipu7: add IPU7 input system device driver")
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This one was fully static, so no need to fill it in the register
function manually.
Signed-off-by: Link Mauve <linkmauve@linkmauve.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
