[ Upstream commit d2845519b0 ]
Fix up xfs_inumbers to now pass in the XFS_IBULK* flags into the flags
argument to xfs_inobt_walk, which expects the XFS_IWALK* flags.
Currently passing the wrong flags works for non-debug builds because
the only XFS_IWALK* flag has the same encoding as the corresponding
XFS_IBULK* flag, but in debug builds it can trigger an assert that no
incorrect flag is passed. Instead just extra the relevant flag.
Fixes: 5b35d922c5 ("xfs: Decouple XFS_IBULK flags from XFS_IWALK flags")
Cc: <stable@vger.kernel.org> # v5.19
Reported-by: cen zhang <zzzccc427@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62be7afcc1 ]
btrfs_zone_finish() can fail for several reason. If it is -EAGAIN, we need
to try it again later. So, put the block group to the retry list properly.
Failing to do so will keep the removable block group intact until remount
and can causes unnecessary ENOSPC.
Fixes: 74e91b12b1 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0497dfba98 ]
Similar to mark_bg_unused() and mark_bg_to_reclaim(), we have a few
places that use bg_list with refcounting, mostly for retrying failures
to reclaim/delete unused.
These have custom logic for handling locking and refcounting the bg_list
properly, but they actually all want to do the same thing, so pull that
logic out into a helper. Unfortunately, mark_bg_unused() does still need
the NEW flag to avoid prematurely marking stuff unused (even if refcount
is fine, we don't want to mess with bg creation), so it cannot use the
new helper.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 62be7afcc1 ("btrfs: zoned: requeue to unused block group list if zone finish failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7cbce3cb4c ]
All other users of the bg_list list_head increment the refcount when
adding to a list and decrement it when deleting from the list. Just for
the sake of uniformity and to try to avoid refcounting bugs, do it for
this list as well.
This does not fix any known ref-counting bug, as the reference belongs
to a single task (trans_handle is not shared and this represents
trans_handle->new_bgs linkage) and will not lose its original refcount
while that thread is running. And BLOCK_GROUP_FLAG_NEW protects against
ref-counting errors "moving" the block group to the unused list without
taking a ref.
With that said, I still believe it is simpler to just hold the extra ref
count for this list user as well.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 62be7afcc1 ("btrfs: zoned: requeue to unused block group list if zone finish failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33e8f24b52 ]
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f06c942aa ]
Only one of the callers of __add_block_group_free_space() aborts the
transaction if the call fails, while the others don't do it and it's
either never done up the call chain or much higher in the call chain.
So make sure we abort the transaction at __add_block_group_free_space()
if it fails, which brings a couple benefits:
1) If some call chain never aborts the transaction, we avoid having some
metadata inconsistency because BLOCK_GROUP_FLAG_NEEDS_FREE_SPACE is
cleared when we enter __add_block_group_free_space() and therefore
__add_block_group_free_space() is never called again to add the block
group items to the free space tree, since the function is only called
when that flag is set in a block group;
2) If the call chain already aborts the transaction, then we get a better
trace that points to the exact step from __add_block_group_free_space()
which failed, which is better for analysis.
So abort the transaction at __add_block_group_free_space() if any of its
steps fails.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b63c8c1ede ]
Transaction aborts should be done next to the place the error happens,
which was not done in add_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 1f06c942aa ("btrfs: always abort transaction on failure to add block group to free space tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e124966775 ]
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e61f6ab08 ]
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72 ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 13b3af26a4 ]
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-3-c8405df47c19@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1e61f6ab08 ("usb: typec: fusb302: cache PD RX state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ee9cebd0a upstream.
In order to support future versions of the SVSM_CORE_PVALIDATE call, all
reserved fields within a PVALIDATE entry must be set to zero as an SVSM should
be ensuring all reserved fields are zero in order to support future usage of
reserved areas based on the protocol version.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/7cde412f8b057ea13a646fb166b1ca023f6a5031.1755098819.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 452690be7d upstream.
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68fc0f4b0d upstream.
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reported-by: Thomas Dreibholz <dreibh@simula.no>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccab044697 upstream.
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8151320c74 upstream.
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a458b29021 upstream.
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250818202724.15713-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddf7233fca upstream.
When enabling a sched_ext scheduler, we may trigger invalid task state
transitions, resulting in warnings like the following (which can be
easily reproduced by running the hotplug selftest in a loop):
sched_ext: Invalid task state transition 0 -> 3 for fish[770]
WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0
...
RIP: 0010:scx_set_task_state+0x7c/0xc0
...
Call Trace:
<TASK>
scx_enable_task+0x11f/0x2e0
switching_to_scx+0x24/0x110
scx_enable.isra.0+0xd14/0x13d0
bpf_struct_ops_link_create+0x136/0x1a0
__sys_bpf+0x1edd/0x2c30
__x64_sys_bpf+0x21/0x30
do_syscall_64+0xbb/0x370
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This happens because we skip initialization for tasks that are already
dead (with their usage counter set to zero), but we don't exclude them
during the scheduling class transition phase.
Fix this by also skipping dead tasks during class swiching, preventing
invalid task state transitions.
Fixes: a8532fac7b ("sched_ext: TASK_DEAD tasks must be switched into SCX on ops_enable")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7af76e9d18 upstream.
Receiving HSR frame with insufficient space to hold HSR tag in the skb
can result in a crash (kernel BUG):
[ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1
[ 45.392559] ------------[ cut here ]------------
[ 45.392912] kernel BUG at net/core/skbuff.c:211!
[ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef)
[ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0
<snip registers, remove unreliable trace>
[ 45.402911] Call Trace:
[ 45.403105] <IRQ>
[ 45.404470] skb_push+0xcd/0xf0
[ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0
[ 45.406513] br_forward_finish+0x128/0x260
[ 45.408483] __br_forward+0x42d/0x590
[ 45.409464] maybe_deliver+0x2eb/0x420
[ 45.409763] br_flood+0x174/0x4a0
[ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0
[ 45.411618] br_handle_frame+0xac3/0x1230
[ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0
[ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0
[ 45.424478] __netif_receive_skb+0x22/0x170
[ 45.424806] process_backlog+0x242/0x6d0
[ 45.425116] __napi_poll+0xbb/0x630
[ 45.425394] net_rx_action+0x4d1/0xcc0
[ 45.427613] handle_softirqs+0x1a4/0x580
[ 45.427926] do_softirq+0x74/0x90
[ 45.428196] </IRQ>
This issue was found by syzkaller.
The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.
The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).
Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.
Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().
In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.
Further Details:
In the reproducer, the following network interface chain is set up:
┌────────────────┐ ┌────────────────┐
│ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐
└────────────────┘ └────────────────┘ │
│ ┌──────┐
├─┤ hsr0 ├───┐
│ └──────┘ │
┌────────────────┐ ┌────────────────┐ │ │┌────────┐
│ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │
└────────────────┘ └────────────────┘ ┌┼ bridge │
││ │
│└────────┘
│
┌───────┐ │
│ ... ├──────┘
└───────┘
To trigger the events leading up to crash, reproducer sends a corrupted
HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'.
The first HSR-layer function to process this frame is
hsr_handle_frame(). It and then checks if the
protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that
the skb is long enough. For the crashing frame it is not, and hence the
skb->network_header and skb->mac_len fields are set incorrectly,
pointing after the end of the linear buffer.
I will call this a BUG#1 and it is what is addressed by this patch. In
the crashing scenario before the fix, the skb continues to go down the
hsr path as follows.
hsr_handle_frame() then calls this sequence
hsr_forward_skb()
fill_frame_info()
hsr->proto_ops->fill_frame_info()
hsr_fill_frame_info()
hsr_fill_frame_info() contains a check that intends to check whether the
skb actually contains the HSR header. But the check relies on the
skb->mac_len field which was erroneously setup due to BUG#1, so the
check passes and the execution continues back in the hsr_forward_skb():
hsr_forward_skb()
hsr_forward_do()
hsr->proto_ops->get_untagged_frame()
hsr_get_untagged_frame()
create_stripped_skb_hsr()
In create_stripped_skb_hsr(), a copy of the skb is created and is
further corrupted by operation that attempts to strip the HSR tag in a
call to __pskb_copy().
The skb enters create_stripped_skb_hsr() with ethernet header pushed in
linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of
ethernet header into the headroom, creating skb_in with a headroom of
size 8. The subsequent __pskb_copy() then creates an skb with headroom
of just 2 and skb->len of just 12, this is how it looks after the copy:
gdb) p skb->len
$10 = 12
(gdb) p skb->data
$11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373",
(gdb) p skb->head
$12 = (unsigned char *) 0xffff888041e45380 ""
It seems create_stripped_skb_hsr() assumes that ETH header is pulled
in the headroom when it's entered, because it just pulls HSR header on
top. But that is not the case in our code-path and we end up with the
corrupted skb instead. I will call this BUG#2
*I got confused here because it seems that under no conditions can
create_stripped_skb_hsr() work well, the assumption it makes is not true
during the processing of hsr frames - since the skb_push() in
hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I
missed something here.*
Next, the execution arrives in hsr_deliver_master(). It calls
skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have
enough space for the pull (as it only has 12 bytes in total at this
point).
*The skb_pull() here further suggests that ethernet header is meant
to be pushed through the whole hsr processing and
create_stripped_skb_hsr() should pull it before doing the HSR header
pull.*
hsr_deliver_master() then puts the corrupted skb on the queue, it is
then picked up from there by bridge frame handling layer and finally
lands in br_dev_queue_push_xmit where it panics.
Cc: stable@kernel.org
Fixes: 48b491a5cc ("net: hsr: fix mac_len checks")
Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4be8cefc13 upstream.
Add the flag KVM_LARCH_LBT checking in function kvm_own_lbt(), so that
it can be called safely rather than duplicated enabling again.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4db9cd5548 upstream.
dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr
with the dce_clk_mgr, causing incorrect behaviour on DCE6.
Fix it by removing the extra dce_clk_mgr_construct.
Fixes: 62eab49faa ("drm/amd/display: hide VGH asic specific structs")
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbddcbe36a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bcf63a443 upstream.
[Why]
A null pointer dereference vulnerability exists in the AMD display driver's
(DC module) cleanup function dc_destruct().
When display control context (dc->ctx) construction fails
(due to memory allocation failure), this pointer remains NULL.
During subsequent error handling when dc_destruct() is called,
there's no NULL check before dereferencing the perf_trace member
(dc->ctx->perf_trace), causing a kernel null pointer dereference crash.
[How]
Check if dc->ctx is non-NULL before dereferencing.
Link: https://lore.kernel.org/r/tencent_54FF4252EDFB6533090A491A25EEF3EDBF06@qq.com
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
(Updated commit text and removed unnecessary error message)
Signed-off-by: Siyang Liu <Security@tencent.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dd8e2ba26)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3477c1b097 upstream.
amdgpu_dm_commit_planes calls update_freesync_state_on_stream only for
the primary plane. If a commit affects a CRTC but not its primary plane,
it would previously not trigger a refresh cycle or affect LFC, violating
current UAPI semantics.
Fixes e.g. atomic commits affecting only the cursor plane being limited
to the minimum refresh rate.
Don't do this for the legacy cursor ioctls though, it would break the
UAPI semantics for those.
Suggested-by: Xaver Hugl <xaver.hugl@kde.org>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3034
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7bfba959)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e58401a24 upstream.
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b34e4c86 upstream.
Update the client id mapping so the correct clients
get printed when there is a mmhub page fault.
Tested-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bae62cc98 upstream.
Update the client id mapping so the correct clients
get printed when there is a mmhub page fault.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a2681eda7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c90f2e1172 upstream.
After a recent change in clang to expose uninitialized warnings from
const variables and pointers [1], there is a warning in
imu_v12_0_program_rlc_ram() because data is passed uninitialized to
program_imu_rlc_ram():
drivers/gpu/drm/amd/amdgpu/imu_v12_0.c:374:30: error: variable 'data' is uninitialized when used here [-Werror,-Wuninitialized]
374 | program_imu_rlc_ram(adev, data, (const u32)size);
| ^~~~
As this warning happens early in clang's frontend, it does not realize
that due to the assignment of r to -EINVAL, program_imu_rlc_ram() is
never actually called, and even if it were, data would not be
dereferenced because size is 0.
Just initialize data to NULL to silence the warning, as the commit that
added program_imu_rlc_ram() mentioned it would eventually be used over
the old method, at which point data can be properly initialized and
used.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2107
Fixes: 56159fffaa ("drm/amdgpu: use new method to program rlc ram")
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4a69f7f29 upstream.
HUBBUB structure is not initialized on DCE hardware, so check if it is NULL
to avoid null dereference while accessing amdgpu_dm_capabilities file in
debugfs.
Signed-off-by: Peter Shkenev <mustela@erminea.space>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed4efe426a upstream.
The power limit will be cached in smu->current_power_limit but
if the ASIC goes into S3 this value won't be restored.
Restore the value during SMU resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 26a609e053)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 514678da56 upstream.
We only need the fw based discovery table for sysfs. No
need to parse it. Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441
Fixes: 80a0e82829 ("drm/amdgpu/discovery: optionally use fw based ip discovery")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62eedd150f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 417c01b92e upstream.
The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.
Clamp the param if the user provides a value that will result in an invalid
fps.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Closes: https://lore.kernel.org/linux-media/f11653a7-bc49-48cd-9cdb-1659147453e4@xs4all.nl/T/#m91cd962ac942834654f94c92206e2f85ff7d97f0
Fixes: aaaa93eda6 ("[media] media: venus: venc: add video encoder files")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[bod: Change "parm" to "param"]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 377dc500d2 upstream.
The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.
Clamp the value if the user provides a param that will result in an invalid
fps.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Closes: https://lore.kernel.org/linux-media/f11653a7-bc49-48cd-9cdb-1659147453e4@xs4all.nl/T/#m91cd962ac942834654f94c92206e2f85ff7d97f0
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Cc: stable@vger.kernel.org
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5615-rb5
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[bod: Change "parm" to "param"]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3200144a2f upstream.
Make sure the interrupt handler is initialized before the interrupt is
registered.
If the IRQ is registered before hfi_create(), it's possible that an
interrupt fires before the handler setup is complete, leading to a NULL
dereference.
This error condition has been observed during system boot on Rb3Gen2.
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Dikshita Agarwal <quic_dikshita@quicinc.com> # RB5
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 640803003c upstream.
Ensure the IRQ is disabled - and all pending handlers completed - before
dismantling the interrupt routing and clearing related pointers.
This prevents any possibility of the interrupt triggering after the
handler context has been invalidated.
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Dikshita Agarwal <quic_dikshita@quicinc.com> # RB5
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49befc830d upstream.
Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access.
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Cc: stable@vger.kernel.org
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Co-developed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69080ec3d0 upstream.
A call to media_device_init() requires media_device_cleanup() counterpart
to complete cleanup and release any allocated resources.
This has been done in the driver .remove() right from the beginning, but
error paths on .probe() shall also be fixed.
Fixes: a1d7c116fc ("media: camms: Add core files")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c92c49fc6 upstream.
Both the ACE and CSI driver are missing a mei_cldev_disable() call in
their remove() function.
This causes the mei_cl client to stay part of the mei_device->file_list
list even though its memory is freed by mei_cl_bus_dev_release() calling
kfree(cldev->cl).
This leads to a use-after-free when mei_vsc_remove() runs mei_stop()
which first removes all mei bus devices calling mei_ace_remove() and
mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls
mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing
the just freed cldev->cl.
And mei_vsc_remove() it self is run at shutdown because of the
platform_device_unregister(tp->pdev) in vsc_tp_shutdown()
When building a kernel with KASAN this leads to the following KASAN report:
[ 106.634504] ==================================================================
[ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1
[ 106.634729]
[ 106.634767] Tainted: [E]=UNSIGNED_MODULE
[ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025
[ 106.634773] Call Trace:
[ 106.634777] <TASK>
...
[ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636)
[ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei
[ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei
...
[ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei
[ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc
[ 106.635066] platform_remove (drivers/base/platform.c:1424)
Add the missing mei_cldev_disable() calls so that the mei_cl gets removed
from mei_device->file_list before it is freed to fix this.
Fixes: 78876f71b3 ("media: pci: intel: ivsc: Add ACE submodule")
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 298d1471cf upstream.
Getting / Setting the frame interval using the V4L2 subdev pad ops
get_frame_interval/set_frame_interval causes a deadlock, as the
subdev state is locked in the [1] but also in the driver itself.
In [2] it's described that the caller is responsible to acquire and
release the lock in this case. Therefore, acquiring the lock in the
driver is wrong.
Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval()
and mt9m114_ifp_set_frame_interval().
[1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129
[2] Documentation/driver-api/media/v4l2-subdev.rst
Fixes: 24d756e914 ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9bb2eacc7 upstream.
During the probe() routine, the PiSP BE driver needs to power up the
interface in order to identify and initialize the hardware.
The driver resumes the interface by calling the
pispbe_runtime_resume() function directly, without going
through the pm_runtime helpers, but later suspends it by calling
pm_runtime_put_autosuspend().
This causes a PM usage count imbalance at probe time, notified by the
runtime_pm framework with the below message in the system log:
pispbe 1000880000.pisp_be: Runtime PM usage count underflow!
Fix this by resuming the interface using the pm runtime helpers instead
of calling the resume function directly and use the pm_runtime framework
in the probe() error path. While at it, remove manual suspend of the
interface in the remove() function. The driver cannot be unloaded if in
use, so simply disable runtime pm.
To simplify the implementation, make the driver depend on PM as the
RPI5 platform where the ISP is integrated in uses the PM framework by
default.
Fixes: 12187bd5d4 ("media: raspberrypi: Add support for PiSP BE")
Cc: stable@vger.kernel.org
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7af160aea2 upstream.
In the interrupt handler rain_interrupt(), the buffer full check on
rain->buf_len is performed before acquiring rain->buf_lock. This
creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as
rain->buf_len is concurrently accessed and modified in the work
handler rain_irq_work_handler() under the same lock.
Multiple interrupt invocations can race, with each reading buf_len
before it becomes full and then proceeding. This can lead to both
interrupts attempting to write to the buffer, incrementing buf_len
beyond its capacity (DATA_SIZE) and causing a buffer overflow.
Fix this bug by moving the spin_lock() to before the buffer full
check. This ensures that the check and the subsequent buffer modification
are performed atomically, preventing the race condition. An corresponding
spin_unlock() is added to the overflow path to correctly release the
lock.
This possible bug was found by an experimental static analysis tool
developed by our team.
Fixes: 0f314f6c2e ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e40e0bb77 upstream.
When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.
Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.
Fixes: 0e0fe3958f ("[media] usbtv: Add support for PAL video source")
Cc: stable@vger.kernel.org
Signed-off-by: Ludwig Disterhof <ludwig@disterhof.eu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: call vb2_is_busy instead of vb2_is_streaming]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a0400aca5 upstream.
It's a common pattern in drivers to free the control handler's resources
and then return the handler's error code on drivers' error handling paths.
Alas, the v4l2_ctrl_handler_free() function also zeroes the error field,
effectively indicating successful return to the caller.
There's no apparent need to touch the error field while releasing the
control handler's resources and cleaning up stale pointers. Not touching
the handler's error field is a more certain way to address this problem
than changing all the users, in which case the pattern would be likely to
re-emerge in new drivers.
Do just that, don't touch the control handler's error field in
v4l2_ctrl_handler_free().
Fixes: 0996517cf8 ("V4L/DVB: v4l2: Add new control handling framework")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01350185fe upstream.
The desired clock frequency was correctly set to 400MHz in the device tree
but was lowered by the driver to 300MHz breaking 4K 60Hz content playback.
Fix the issue by removing the driver call to clk_set_rate(), which reduce
the amount of board specific code.
Fixes: 003afda97c ("media: verisilicon: Enable AV1 decoder on rk3588")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e43442d49 upstream.
The pixel_array control size was calculated incorrectly:
the dimensions were swapped (dims[0] should be the height), and the
values should be the width or height divided by PIXEL_ARRAY_DIV
and rounded up. So don't use roundup, but use DIV_ROUND_UP instead.
This bug is harmless in the sense that nothing will break, except that
it consumes way too much memory for this control.
Fixes: 6bc7643d1b ("media: vivid: add pixel_array test control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff49672a28 upstream.
The pad argument to v4l2_subdev_state_xlate_streams() is incorrect, static
pad number is used for the source pad even though the pad number is
dependent on the stream. Fix it.
Fixes: 3a5c59ad92 ("media: ipu6: Rework CSI-2 sub-device streaming control")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
