* pm-sleep:
PM: sleep: Add dev_wakeup_path() helper
PM / suspend: fix kernel-doc markup
PM: sleep: Print driver flags for all devices during suspend/resume
* pm-acpi:
PM: ACPI: Refresh wakeup device power configuration every time
PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
PM: ACPI: reboot: Use S5 for reboot
* pm-domains:
PM: domains: create debugfs nodes when adding power domains
PM: domains: replace -ENOTSUPP with -EOPNOTSUPP
* powercap:
powercap: Adjust printing the constraint name with new line
powercap: RAPL: Add AMD Fam19h RAPL support
powercap: Add AMD Fam17h RAPL support
powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
x86/msr-index: sort AMD RAPL MSRs by address
* pm-cpuidle:
cpuidle: Select polling interval based on a c-state with a longer target residency
cpuidle: psci: Enable suspend-to-idle for PSCI OSI mode
PM: domains: Enable dev_pm_genpd_suspend|resume() for suspend-to-idle
PM: domains: Rename pm_genpd_syscore_poweroff|poweron()
* pm-em:
PM / EM: Micro optimization in em_cpu_energy
PM: EM: Update Energy Model with new flag indicating power scale
PM: EM: update the comments related to power scale
PM: EM: Clarify abstract scale usage for power values in Energy Model
Pull OPP (Operating Performance Points) updates for 5.11-rc1 from
Viresh Kumar:
"This contains the following updates:
- Allow empty (node-less) OPP tables in DT for passing just the
dependency related information (Nicola Mazzucato).
- Fix a potential lockdep in OPP core and other OPP core cleanups
(Viresh Kumar).
- Don't abuse dev_pm_opp_get_opp_table() to create an OPP table, fix
cpufreq-dt driver for the same (Viresh Kumar).
- dev_pm_opp_put_regulators() accepts a NULL argument now, updates to
all the users as well (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
opp: Don't return opp_dev from _find_opp_dev()
opp: Allocate the OPP table outside of opp_table_lock
opp: Always add entries in dev_list with opp_table->lock held
Make cpufreq_online() return negative error codes on all errors that
cause the policy to be destroyed, as appropriate.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix up the remaining kerneldoc comments that don't adhere to the
expected format and clarify some of them a bit.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
local_clock() has better precision and accuracy as compared to jiffies,
lets use it for time management in cpufreq stats.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rearrange a conditional to make it more straightforward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Avoid doing the same assignment in both branches of a conditional,
do it after the whole conditional instead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
debugfs nodes were created in genpd_debug_init alled in late_initcall
preventing power domains registered though loadable modules to have
a debugfs entry.
Create/remove debugfs nodes when the power domain is added/removed
to/from the internal gpd_list.
Signed-off-by: Thierry Strudel <tstrudel@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The opp binding now allows to have an empty opp table and shared-opp to
still describe that devices share v/f lines.
When initialising an empty opp table, allow such case by:
- treating such conditions with warnings in place of errors
- don't fail on empty table
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently the optional property opp-shared is used within an opp table
to tell that a set of devices share their clock/voltage lines (and the
OPP points).
It is therefore possible to use an empty OPP table to convey only that
information, useful in situations where the opp points are provided via
other means (hardware. firmware, etc).
Update the documentation to remark this additional case and provide an
example.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra check. Drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra check. Drop them.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra check. Drop them.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra check. Drop them.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra checks. Drop them.
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra checks. Drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It has been found that some users (like cpufreq-dt and others on LKML)
have abused the helper dev_pm_opp_get_opp_table() to create the OPP
table instead of just finding it, which is the wrong thing to do. This
routine was meant for OPP core's internal working and exposed the whole
functionality by mistake.
Change the scope of dev_pm_opp_get_opp_table() to only finding the
table. The internal helpers _opp_get_opp_table*() are thus renamed to
_add_opp_table*(), dev_pm_opp_get_opp_table_indexed() is removed (as we
don't need the index field for finding the OPP table) and so the only
user, genpd, is updated.
Note that the prototype of _add_opp_table() was already left in opp.h by
mistake when it was removed earlier and so we weren't required to add it
now.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Initially, the helper dev_pm_opp_get_opp_table() was supposed to be used
only for the OPP core's internal use (it tries to find an existing OPP
table and if it doesn't find one, then it allocates the OPP table).
Sometime back, the cpufreq-dt driver started using it to make sure all
the relevant resources required by the OPP core are available earlier
during initialization process to properly propagate -EPROBE_DEFER.
It worked but it also abused the API to create an OPP table, which
should be created with the help of other helpers provided by the OPP
core.
The OPP core will be updated in a later commit to limit the scope of
dev_pm_opp_get_opp_table() to only finding an existing OPP table and not
create one. This commit updates the cpufreq-dt driver before that
happens.
Now the cpufreq-dt driver creates the OPP and cpufreq tables for all the
CPUs from driver's init callback itself.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is a lot of stuff here which can be done outside of the
opp_table->lock, do that. This helps avoiding a circular dependency
lockdeps around debugfs.
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the sum of the utilization of CPUs in a power domain is zero,
return the energy as 0 without doing any computations.
Acked-by: Quentin Perret <qperret@google.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add mechanism to discover the power scale present in the performance
protocol for all domains. Provide this information to Energy Model,
which then can be checked in other frameworks, e.g. thermal.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a new interface to the existing perf_ops and export the information
about the power values scale.
This would be used by the cpufreq driver and Energy Model framework to
set the performance domains scale: milli-Watts or abstract scale.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When wakeup signaling is enabled for a bridge for the second (or every
next) time in a row, its existing device wakeup power configuration
may not match the new conditions. For example, some devices below
it may have been put into low-power states and that changes the
device wakeup power conditions or similar. This causes functional
problems to appear on some systems (for example, because of it the
Thunderbolt port on Dell Precision 5550 cannot detect devices plugged
in after it has been suspended).
For this reason, modify __acpi_device_wakeup_enable() to refresh the
device wakeup power configuration of the target device on every
invocation, not just when it is called for that device first time
in a row.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.
However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.
For instance, suppose that there are two devices below a bridge and
they both can signal wakeup. Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.
Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it. Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1. This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.
Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.
To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.
Fixes: 1ba51a7c14 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
The function tegra194_get_speed_common() uses hardware timers to
calculate the current CPUFREQ and so rename this function to be
tegra194_calculate_speed() to reflect what it does.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Tegra194 CPUFREQ driver sets the CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag which means that the CPUFREQ framework will call the 'get' callback
on boot to determine the current frequency of the CPUs. Therefore, it is
not necessary for the Tegra194 CPUFREQ driver to internally call the
tegra194_get_speed_common() during initialisation to query the current
frequency as well. Fix this by removing the call to the
tegra194_get_speed_common() during initialisation and simplify the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The CPUFREQ driver framework references each individual CPUs when
getting and setting the speed. Tegra186 has 3 clusters of A57 CPUs and
1 cluster of Denver CPUs. Hence, the Tegra186 CPUFREQ driver need to
know which cluster a given CPU belongs to. The logic in the Tegra186
driver can be greatly simplified by storing the cluster ID associated
with each CPU in the tegra186_cpufreq_cpu structure. This allow us to
completely remove the Tegra cluster info structure from the driver and
simplifiy the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Sparse warns that the incorrect type is being assigned to the CPUFREQ
driver_data variable in the Tegra186 CPUFREQ driver. The Tegra186
CPUFREQ driver is assigned a type of 'void __iomem *' to a pointer of
type 'void *' ...
drivers/cpufreq/tegra186-cpufreq.c:72:37: sparse: sparse: incorrect
type in assignment (different address spaces) @@
expected void *driver_data @@ got void [noderef] __iomem * @@
...
drivers/cpufreq/tegra186-cpufreq.c:87:40: sparse: sparse: incorrect
type in initializer (different address spaces) @@
expected void [noderef] __iomem *edvd_reg @@ got void *driver_data @@
The Tegra186 CPUFREQ driver is using the policy->driver_data variable to
store and iomem pointer to a Tegra186 CPU register that is used to set
the clock speed for the CPU. This is not necessary because the register
base address is already stored in the driver data and the offset of the
register for each CPU is static. Therefore, fix this by adding a new
structure with the register offsets for each CPU and store this in the
main driver data structure along with the register base address. Please
note that a new structure has been added for storing the register
offsets rather than a simple array, because this will permit further
clean-ups and simplification of the driver.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:
WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]
Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.
Fixes: 2782ef34ed ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 47ac9aa165 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 8def31034d ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a0a22cf144 ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f328584f7b ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Reviewed-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: ab0ea257fc ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 46e2856b8e ("cpufreq: Add Kryo CPU scaling driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 501c574f4e ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 6754f55610 ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the missing platform_driver_unregister() before return from
mtk_cpufreq_driver_init in the error handling case when failed
to register mtk-cpufreq platform device
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
and keeps changing slightly. This change returns a consistent value
from freq_table. If the reconstructed frequency has acceptable delta
from the last written value, then return the frequency corresponding
to the last written ndiv value from freq_table. Otherwise, print a
warning and return the reconstructed freq.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add MT8516 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'mediatek-cpufreq' driver.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use dev_pm_opp_put_prop_name() to avoid mem leak, which free opp_table.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
