Share a little common logic. And note the comments here are a little
out of date (e.g. we don't always create new state in the "new" case any
more.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For the most part readers of cl_cb_state only need a value that is
"eventually" right. And the value is set only either 1) in response to
some change of state, in which case it's set to UNKNOWN and then a
callback rpc is sent to probe the real state, or b) in the handling of a
response to such a callback. UNKNOWN is therefore always a "temporary"
state, and for the other states we're happy to accept last writer wins.
So I think we're OK here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID. In addition, RFC 5661 says:
15.1.16.5. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used. This
error is moot in NFSv4.1 because all operations that take a stateid
MUST be preceded by the SEQUENCE operation, and the earlier server
instance is detected by the session infrastructure that supports
SEQUENCE.
I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery. Bruce suggested an additional test that could be
useful to client developers.
Lastly, RFC 5661, section 18.48.3 has this:
o Special stateids are always considered invalid (they result in the
error code NFS4ERR_BAD_STATEID).
An explicit check is made for those state IDs to avoid printk noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Initiate a CB probe when a new connection with the correct direction is added
to a session (IFF backchannel is marked as down). Without this a
BIND_CONN_TO_SESSION has no effect on the internal backchannel state, which
causes the server to reply to every SEQUENCE op with the
SEQ4_STATUS_CB_PATH_DOWN flag set until DESTROY_SESSION.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ValleyView is similar to IbexPeak here, but with different register
offsets.
v2: use SDVOB instead ov VLV_HDMIB (Daniel)
drop unnecessary eDP check in DP_C init (Daniel)
eDP support will be coming later from Shobit.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Might be able to merge this back in at some point, but we're seeing bugs
with ADPA based detection, so keep it separate for now with explicit
hotplug trigger usage.
v2: drop superfluous debug message
v3: comment forced detection, need to debug (Eugeni)
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VLV supports two dp panels, there are two set of panel power sequence
registers which needed to be programmed based on the configured
pipe. This patch add supports for the same
Acked-by: Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Beeresh G <beeresh.g@intel.com>
Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Drop the lone hunk and only keep the register definitions - I
loathe incomplete bandaids. Also add a comment that this is for vlv.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need to flush the msgr workqueue during mon_client shutdown to
ensure that any work affecting our embedded ceph_connection is
finished so that we can be safely destroyed.
Previously, we were flushing the work queue after osd_client
shutdown and before mon_client shutdown to ensure that any osd
connection refs to authorizers are flushed. Remove the redundant
flush, and document in the comment that the mon_client flush is
needed to cover that case as well.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
(cherry picked from commit f3dea7edd3)
The bug can cause NULL pointer dereference in write_partial_msg_pages
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
(cherry picked from commit 43643528cc)
There were a few direct calls to ceph_con_{get,put}() instead of the con
ops from osd_client.c. This is a bug since those ops aren't defined to
be ceph_con_get/put.
This breaks refcounting on the ceph_osd structs that contain the
ceph_connections, and could lead to all manner of strangeness.
The purpose of the ->get and ->put methods in a ceph connection are
to allow the connection to indicate it has a reference to something
external to the messaging system, *not* to indicate something
external has a reference to the connection.
[elder@inktank.com: added that last sentence]
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Alex Elder <elder@inktank.com>
(cherry picked from commit 0d47766f14)
In ceph_osdc_release_request(), a reference to the r_reply message
is dropped. But just after that, that same message is revoked if it
was in use to receive an incoming reply. Reorder these so we are
sure we hold a reference until we're actually done with the message.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
(cherry picked from commit ab8cb34a4b)
I got lots of NULL pointer dereference Oops when compiling kernel on ceph.
The bug is because the kernel page migration routine replaces some pages
in the page cache with new pages, these new pages' private can be non-zero.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
(cherry picked from commit 28c0254ede)
Printing the list of loaded modules is really unrelated to what
this function is about, and is particularly unnecessary in the
context of the SysRQ key handling (gets printed so far over and
over).
It should really be the caller of the function to decide whether
this piece of information is useful (and to avoid redundantly
printing it).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4FDF21A4020000780008A67F@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's not being used for other than creating module aliases (i.e.
no loadable section has any reference to it).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4FDF1EFD020000780008A65D@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement a cleaner and easier to maintain version for the section
warning fixes implemented in commit eeaaa96a3a
("x86/nmi: Fix section mismatch warnings on 32-bit").
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Link: http://lkml.kernel.org/r/1340049393-17771-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add some VLV limit structures and update the PLL code.
v2: resolve conflicts, Vijay to re-post with PLL valid checks and fixed limits
v3: re-add dpio write function
v4: squash in Vijay's fixes for the PLL limits and clean up the m/n finder
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is just the minimal patch to disable all this code so that we can
do decent amounts of QA before we rip it all out.
The complicating thing is that we need to flush the gpu caches after
the batchbuffer is emitted. Which is past the point of no return where
execbuffer can't fail any more (otherwise we risk submitting the same
batch multiple times).
Hence we need to add a flag to track whether any caches associated
with that ring are dirty. And emit the flush in add_request if that's
the case.
Note that this has a quite a few behaviour changes:
- Caches get flushed/invalidated unconditionally.
- Invalidation now happens after potential inter-ring sync.
I've bantered around a bit with Chris on irc whether this fixes
anything, and it might or might not. The only thing clear is that with
these changes it's much easier to reason about correctness.
Also rip out a lone get_next_request_seqno in the execbuffer
retire_commands function. I've dug around and I couldn't figure out
why that is still there, with the outstanding lazy request stuff it
shouldn't be necessary.
v2: Chris Wilson complained that I also invalidate the read caches
when flushing after a batchbuffer. Now optimized.
v3: Added some comments to explain the new flushing behaviour.
Cc: Eric Anholt <eric@anholt.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull perf improvements from Arnaldo Carvalho de Melo:
* Replace event_name with perf_evsel__name, that handles the event
modifiers and doesn't use static variables.
* GTK browser improvements, from Namhyung Kim
* Fix possible NULL pointer deref in the TUI annotate browser, from
Samuel Liao
* Add sort by source file:line number, using addr2line.
* Allow printing histogram text snapshots at any point in top/report.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for two-channel dma under dmaengine
support: mmp-adma and pxa910-squ
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Leo Yan <leoy@marvell.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
This patch adds a small inline wrapper for the devivce_tx_status callback of a
dma device. This makes the source code of users of this function a bit more
compact and a bit more legible.
E.g.:
-status = chan->device->device_tx_status(chan, cookie, &state)
+status = dmaengine_tx_status(chan, cookie, &state)
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
This patch enable sound playback/capture on CN9/CN10.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The Wolfson Arizona platform is used for a range of low power audio hub
CODECs. Many of these devices feature an integrated power supply for the
microphone which is supported by this driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This patch is required from FSI sound driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch enable HDMI support on CON3.
And removed unnecessary CONFIG_SYSFS_DEPRECATED_xxx config.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
In order to enable FSI-B selection from platform board,
this patch adds its interface to GPIO framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
r8a7740 FSI can select its parent clock,
and its selection is dependent on platform board.
In order to enable FSI parent selection from platform board,
this patch adds its interface to clock framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is required from sh_mobile_ceu_camera driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
r8a7740 chip has lasting errata on MERAM buffer, and this patch adds
its work-around on setup-r8a7740.c
It solved CEU/VIO6C/2D-DMAC/VCP1/VPU5F/JPU/DISP memroy access error.
But MERAM driver can't control this issue,
since this work-around requires access to non-MERAM register address.
So, This it will be called as board specific code at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
In order to enable HDMI GPIO selection from platform board,
this patch adds its interface to GPIO framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is required from sh_mobile_hdmi driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is required from sh_mobile_hdmi driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This driver enables i2s mode support on blackfin bf6xx platform.
We reuse bf5xx-i2s-pcm.c as its i2s pcm driver because it's the same
for both bf5xx and bf6xx soc.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The SPORT(Serial Port) module on bf6xx soc has a totally different ip
comparing to bf5xx soc. An individual SPORT module consists of two
independently configurable SPORT halves with identical functionality.
Each SPORT half can be configured for either transmitter or receiver.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
get_voltage_sel() should return selector rather than voltage.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Return -EINVAL if pdata is NULL, otherwise we have NULL dereference bug.
This patch also moves the code checking pdata earlier in lp872x_probe.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
SDHI0 card-detect GPIO IRQ on mackarel currently works, because it is the
default configuration of IRQ26. However, we should not rely on this and
should configure the function explicitly.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch implements the .set_ramp_delay callback to set the ramp_delay on
hardware for BUCK2/3/4 if ramp_delay is set in regulator constraints.
This patch also do some cleaning work for unrequired members of
struct max77686_data.
Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Fixes link failure due to devm_gpio_request_one()
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
It seems to blow up my ilk in all kinds of strange ways. And now that
we're no longer resetting the entire modeset state, it shouldn't be
necessary any longer.
This essentially reverts
commit f817586ceb
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Apr 10 15:50:11 2012 +0200
drm/i915: re-init modeset hw state after gpu reset
safe for the introduction of modeset_init_hw, that one is nice to
prevent code duplication between driver load and resume.
v2: Add a comment to the code to warn future travellers of the dragon
dungeon ahead, suggested by Chris Wilson.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Build failed, when SMP is enabled and EMEV2 is not enabled.
arch/arm/mach-shmobile/built-in.o: In function `shmobile_platform_cpu_kill':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:62: undefined reference to `emev2_platform_cpu_kill'
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_get_core_count':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:39: undefined reference to `emev2_get_core_count'
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_prepare_cpus':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:53: undefined reference to `emev2_smp_prepare_cpus'
arch/arm/mach-shmobile/built-in.o: In function `platform_secondary_init':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:78: undefined reference to `emev2_secondary_init'
arch/arm/mach-shmobile/built-in.o: In function `boot_secondary':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:90: undefined reference to `emev2_boot_secondary
This is the cause by when EMEV2 is disabled, that the check by OF of EMEV2 is
performed in platsmp.c.
This patch revise what the function about EMEV2 may not be used in this file,
when EMEV2 is not enabled.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
chclr_write() will use (chan_reg + chclr_offset).
In sh7372 case, DMA1CHCLR is started from 0xfe008220,
and chan_reg is started from 0xfe008020 (= sh7372_dmae0_resources).
Thus, chclr_offset should be (0x220 - 0x20) instead of 0x220.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>