Parse P2P IEs and set them to FW with related masks.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When cfg80211 calls to change interface type for P2P GO, send
P2P mode config commands to firmware and set bss role and bss
mode accordingly.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When cfg80211 calls to change interface type for P2P client,
send P2P mode config commands to firmware.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Due to firmware design, driver needs to add a default P2P interface
to implement find phase and action frame handshake.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The driver will send some commands to firmware during the
initialization. Currently these commands are sent asynchronously,
which means that we firstly insert all of them to a pre-allocated
command queue, and then start to process them one by one. The
command queue will soon be exhausted if we keep adding new
initialization commands.
This issue can be resolved by sending initialization commands
synchronously because each command is consumed and the buffer is
recycled before queuing next command.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When scan is triggered from cfg80211, the request contains some IEs
and we should parse all the IEs and append each IE into a seperate
IE buffer.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Process remain on channel expired event, and notify cfg80211.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Add a new command to implement remain_on_channel and
cancel_remain_on_channel.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Process the management frames received from firmware and report
them to cfg80211.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Kevin Gan <ganhy@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Add a new command to implement mgmt_frame_register.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Advertise supported management frame types to cfg80211.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Implement mgmt_tx in cfg80211 ops through data path.
Advertise probe resp offload and skip to send probe resp in AP
or GO mode.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Remove unnecessary blank lines and extra tab.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The MCI initialization path has various points of failures,
handle these to ensure that we bail out correctly in such
cases.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We need to have the promiscuous mode enabled for older
chipsets so that the olderchips hardware does not
filters out some valid/necessary frames that need
to be sent to mac80211. Fix this by enabling promiscus
mode for all the chipsets whose macversion <= AR9160
chipsets. This should fix
https://bugzilla.kernel.org/show_bug.cgi?id=45591
shafi: made the fix generic by having the frame filtering
disabled for chipsets older than AR9280.
Cc: Javier Cardona <javier@cozybit.com>
Signed-off-by: Thomas Wagner <Thomas.Wagner@hs-rm.de>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use the idmapper upcall data to verify that the legacy idmapper daemon
is indeed responding to an upcall that we sent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Replace the BUG_ON(idmap->idmap_key_cons != NULL) with a
WARN_ON_ONCE(). Then get rid of the ACCESS_ONCE(idmap->idmap_key_cons).
Then add helper functions for starting, finishing and aborting the
legacy upcall.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
If the ExpressKeys on the Intuos5 are touched, they currently result
an out-of-prox packet being sent even if the pad is already out of
prox. This can cause some confusion in the X driver. To restore the
expected semantics, we make being touched a sufficient condition to
signal proximity.
https://bugs.freedesktop.org/show_bug.cgi?id=54250
Reported-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit c039450 (Input: synaptics - handle out of bounds values from the
hardware) caused any hardware reported values over 7167 to be treated as
a wrapped-around negative value. It turns out that some firmware uses
the value 8176 to indicate a finger near the edge of the touchpad whose
actual position cannot be determined. This value now gets treated as
negative, which can cause pointer jumps and broken edge scrolling on
these machines.
I only know of one touchpad which reports negative values, and this
hardware never reports any value lower than -8 (i.e. 8184). Moving the
threshold for treating a value as negative up to 8176 should work fine
then for any hardware we currently know about, and since we're dealing
with unspecified behavior it's probably the best we can do. The special
8176 value is also likely to result in sudden jumps in position, so
let's also clamp this to the maximum specified value for the axis.
BugLink: http://bugs.launchpad.net/bugs/1046512https://bugzilla.kernel.org/show_bug.cgi?id=46371
Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Alan Swanson <swanson@ukfsn.org>
Tested-by: Arteom <arutemus@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull networking fixes from David S Miller:
1) Netfilter xt_limit module can use uninitialized rules, from Jan
Engelhardt.
2) Wei Yongjun has found several more spots where error pointers were
treated as NULL/non-NULL and vice versa.
3) bnx2x was converted to pci_io{,un}map() but one remaining plain
iounmap() got missed. From Neil Horman.
4) Due to a fence-post type error in initialization of inetpeer entries
(which is where we store the ICMP rate limiting information), we can
erroneously drop ICMPs if the inetpeer was created right around when
jiffies wraps.
Fix from Nicolas Dichtel.
5) smsc75xx resume fix from Steve Glendinnig.
6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.
7) qlcnic uses msleep() with locks held, fix from Narendra K.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netdev: octeon: fix return value check in octeon_mgmt_init_phy()
inetpeer: fix token initialization
qlcnic: Fix scheduling while atomic bug
bnx2: Clean up remaining iounmap
net: phy: smsc: Implement PHY config_init for LAN87xx
smsc75xx: fix resume after device reset
netdev: pasemi: fix return value check in pasemi_mac_phy_init()
team: fix return value check
l2tp: fix return value check
netfilter: xt_limit: have r->cost != 0 case work
Pull vfs fixes from Al Viro:
"A couple of fixes; one for automount/lazy umount race, another a
classic "we don't protect the refcount transition to zero with the
lock that protects looking for object in hash" kind of crap in lockd."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
close the race in nlmsvc_free_block()
do_add_mount()/umount -l races
Pull UML fixes from Richard Weinberger.
* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Preinclude include/linux/kern_levels.h
um: Fix IPC on um
um: kill thread->forking
um: let signal_delivered() do SIGTRAP on singlestepping into handler
um: don't leak floating point state and segment registers on execve()
um: take cleaning singlestep to start_thread()
Of particular note, are fixes to the thin target's discard support,
which I hope is finally working correctly; and fixes for multipath
ioctls and device limits when there are no paths.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=J1f2
-----END PGP SIGNATURE-----
Merge tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull dm fixes from Alasdair G Kergon:
"A few fixes for problems discovered during the 3.6 cycle.
Of particular note, are fixes to the thin target's discard support,
which I hope is finally working correctly; and fixes for multipath
ioctls and device limits when there are no paths."
* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm verity: fix overflow check
dm thin: fix discard support for data devices
dm thin: tidy discard support
dm: retain table limits when swapping to new table with no devices
dm table: clear add_random unless all devices have it set
dm: handle requests beyond end of device instead of using BUG_ON
dm mpath: only retry ioctl when no paths if queue_if_no_path set
dm thin: do not set discard_zeroes_data
The use of ACCESS_ONCE() is wrong, since the various routines that set/clear
idmap->idmap_key_cons should be strictly ordered w.r.t. each other, and
the idmap->idmap_mutex ensures that only one thread at a time may be in
an upcall situation.
Also replace the BUG_ON()s with WARN_ON_ONCE() where appropriate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Report the availability of irq remapping through the
IOMMU-API to allow KVM device passthrough again without
additional module parameter overrides.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Do not deinitialize the AMD IOMMU driver completly when
interrupt remapping is already in use but the initialization
of the DMA layer fails for some reason. Make sure the IOMMU
can still be used to remap interrupts.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add the six routines required to setup interrupt remapping
with the AMD IOMMU. Also put it all together into the AMD
specific irq_remap_ops.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add the routine to setup interrupt remapping for ioapic
interrupts. Also add a routine to change the affinity of an
irq and to free an irq allocation for interrupt remapping.
The last two functions will also be used for MSI interrupts.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add routines to:
* Alloc remapping tables and single entries from these
tables
* Change entries in the tables
* Free entries in the table
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add routine to invalidate the IOMMU cache for interupt
translations. Also include the IRTE caches when flushing all
IOMMU caches.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IVRS table usually includes the IOMMU device. But the
IOMMU does never translate itself, so make sure the IOMMU
driver knows this.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When the IOMMU is enabled very early (as with irq-remapping)
some devices are still in BIOS hand. When dma is blocked
early this can cause lots of IO_PAGE_FAULTs. So delay the
DMA initialization and do it right before the dma_ops are
initialized.
To be secure, block all interrupts by default when irq-remapping is
enabled in the system. They will be reenabled on demand
later. Without blocking interrupts by default devices can
issue arbitrary interrupts by sending special DMA packets to
the CPU that look like MSI messages. This is especially
dangerous when a device is assigned to a KVM guest because
the guest can then DoS the host.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When the IOAPIC information provided in the IVRS table is
not correct or not complete the system may not boot at all
when interrupt remapping is enabled. So check if this
information is correct and print out a firmware bug message
when it is not.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The irq remapping tables for the AMD IOMMU need to be
aligned on a 128 byte boundary. Create a seperate slab-cache
to guarantee this alignment.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The IVRS ACPI table provides information about the IOAPICs
and the HPETs available in the system and which PCI device
ID they use in transactions. Save that information for later
usage in interrupt remapping.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- A couple of wrong context sleep fixes.
- An LLCP rwlock intizialisation fix.
- A missing mutex unlocking for pn533.
- LLCP raw sockets support. This is going to be used for NFC sniffing.
- A build fix for llc_shdlc. It fixes a build error triggered by code that's
living in wireless-next.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Jv+B
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-3.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0
So says Samuel Ortiz <sameo@linux.intel.com>:
The 2nd NFC pull request for 3.7.
- A couple of wrong context sleep fixes.
- An LLCP rwlock intizialisation fix.
- A missing mutex unlocking for pn533.
- LLCP raw sockets support. This is going to be used for NFC sniffing.
- A build fix for llc_shdlc. It fixes a build error triggered by code that's
living in wireless-next.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When the AMD IOMMU doesn't have extended features, an empty line
gets issued in dmesg like so:
[ 3.061417] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 3.066757] <---
[ 3.068294] pci 0000:00:00.2: irq 72 for MSI/MSI-X
[ 3.081213] AMD-Vi: Lazy IO/TLB flushing enabled
Fix it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.
Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.
Reported-by: Florian Dazinger <florian@dazinger.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
