debug_dump() passes id on to debug_info_copy(), which dereferences
in->name unchecked. debug_unregister(), debug_set_size() and
debug_register_view() guard against a NULL id but debug_dump() does not.
Nothing reaches this today, but add the check for consistency.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260910110147.96E851F000FF@smtp.kernel.org/
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y.
Fixes: 14edd0d73b ("s390/cmf: fix virtual vs physical address confusion")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When a PCI device is already in the permanent failure state, recovery is
skipped, but the SCLP recovery report still shows success. Fix this by
changing the status string to explicitly state that recovery was skipped
due to permanent failure.
Cc: stable@vger.kernel.org
Fixes: 4ec6054e73 ("s390/pci: Report PCI error recovery results via SCLP")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With commit 4ec6054e73 ("s390/pci: Report PCI error recovery results
via SCLP") SCLP reports are generated when recovery is performed in
response to an error event. If such an error event arrives but no pdev
is currently associated with the zdev, e.g. because it was removed or
not yet probed, no report is generated. Fix this by generating a report
specific to an error event for a zdev without an associated pdev.
Cc: stable@vger.kernel.org
Fixes: 4ec6054e73 ("s390/pci: Report PCI error recovery results via SCLP")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When pdev is non-NULL, zpci_report_status() accesses the device's driver.
To get a consistent state matching the recovery, the device lock needs to
be held. Do so by expanding the existing device lock critical section.
The lock only needs to be held when the pdev is non-NULL, so extract
the pdev-specific reporting into a helper function which also adds a
lockdep assertion to detect calls without the device lock held.
Cc: stable@vger.kernel.org
Fixes: 4ec6054e73 ("s390/pci: Report PCI error recovery results via SCLP")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In zpci_report_status(), a reference to the pdev associated with the
zdev being reported about is acquired using pci_get_slot(). This
reference needs to be dropped with pci_dev_put(), but this call is
missing, thus leaking the reference. On subsequent hot unplug, this will
cause the struct pci_dev to not be released, leaking memory and
preventing reattach.
At the same time, the only existing caller already holds a pdev
reference. So instead of reacquiring and then dropping another reference,
simply pass the existing pdev pointer to zpci_report_status(). This gets
rid of the need for pci_get_slot() as well as the zdev->zbus check.
Cc: stable@vger.kernel.org
Fixes: 4ec6054e73 ("s390/pci: Report PCI error recovery results via SCLP")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When PMCW.DNV is 0, no I/O device is associated with the subchannel.
However, several code paths access PMCW fields directly from the cached
sch->schib without first invoking the update helper. Add explicit DNV
validation before accessing PMCW fields from the cached SCHIB to avoid
using invalid data.
Reported-by: William Bezenah <wbezenah@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Fixes: 8c58a22968 ("s390/cio: Do not unregister the subchannel based on DNV")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The device number valid (dnv) bit in the PMCW must be checked before
acting on any other PMCW fields for IO-type subchannels. A subchannel
with dnv=0 has no valid device number associated, making it meaningless
to evaluate the enabled (ena) state or issue any I/O instruction against
it.
Reported-by: William Bezenah <wbezenah@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Fixes: 8c58a22968 ("s390/cio: Do not unregister the subchannel based on DNV")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When pmcw.dnv is 0, the contents of all SCHIB fields are unpredictable.
Zero sch->schib in that case to prevent subsequent code from making
decisions based on unpredictable data.
Reported-by: William Bezenah <wbezenah@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Fixes: 8c58a22968 ("s390/cio: Do not unregister the subchannel based on DNV")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The attribute is sriov_numvfs (drivers/pci/iov.c); the document names it
sriov_numvf, which does not exist.
Use sriov_numvfs.
Fixes: de267a7c71 ("s390/pci: Documentation for zPCI")
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation.
Fixes: 6cd87cb5ef ("s390/crypto: Rework protected key AES for true asynch support")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code.
Fixes: 6cd87cb5ef ("s390/crypto: Rework protected key AES for true asynch support")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When a request is transferred to the engine via
crypto_transfer_hash_request_to_engine() there are two return codes
signaling a successful transfer: EINPROGRESS and EBUSY. However the
correct handling of EBUSY was missing and has been added as a return
code indicating a successful transfer to the crypto engine.
Fixes: cbbc675506 ("crypto: s390 - New s390 specific protected key hash phmac")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.17+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When a request is transferred to the engine via
crypto_transfer_skcipher_request_to_engine() there are two return
codes signaling a successful transfer: EINPROGRESS and EBUSY. However
the correct handling of EBUSY was missing and has been added as a
return code indicating a successful transfer to the crypto engine.
Fixes: 6cd87cb5ef ("s390/crypto: Rework protected key AES for true asynch support")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The 4 algorithms implemented in paes_s390 never had any cra_flags
set. So add code which sets the cra_flag to CRYPTO_ALG_ASYNC and
CRYPTO_ALG_NO_FALLBACK.
Fixes: 4ccd065a69 ("crypto: ahash - Add support for drivers with no fallback")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.17+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The PAES CTR implementation used a mutex to lock one page of exclusive
memory for fast CTR processing. Unfortunately a mutex is not save to
use in atomic or interrupt context. So use a binary semaphore instead
which is save to use in such environments.
Furthermore rework the code to get rid of conditional locking. So
restructure the PAES CRT code by extracting the main loop into a
separate function and just give in information about the (locked) page
can be used or not (is not locked).
Fixes: 6cd87cb5ef ("s390/crypto: Rework protected key AES for true asynch support")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In function ctr_paes_do_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. Rework the code to
explicitly scrub the buffer at the end of the function to avoid
exposure of maybe sensitive data.
In function __xts_2keys_prep_param() change the existing scrub to
clean the whole param block instead of just the key field.
Fixes: 6cd87cb5ef ("s390/crypto: Rework protected key AES for true asynch support")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All the 4 PAES cipher processing loops were not checking the return
value of skcipher_walk_done() immediately after calling it. This could
lead to error masking when both the walk operation failed and a
subsequent key conversion was needed (k < n condition).
Add immediate error checks after skcipher_walk_done() in all main
processing loops (ECB, CBC, CTR, XTS modes) to ensure walk errors are
properly propagated and not masked by subsequent operations.
With that comes a slight rework around the skcipher_walk_done()
invocation. It is now necessary to check if the walk has already been
finalized (walk->nbytes is then 0) or not to avoid double
de-allocation of resources held by the walk.
Fixes: 6cd87cb5ef ("s390/crypto: Rework protected key AES for true asynch support")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The AES CTR implementation used a mutex to lock one page of exclusive
memory for fast CTR processing. Unfortunately a mutex is not save to
use in atomic or interrupt context. So use a binary semaphore instead
which is save to use in such environments.
Furthermore rework the code to get rid of conditional locking. So
restructure the AES CRT code by extracting the main loop into a
separate function and just give in information about the (locked) page
can be used or not (is not locked).
Fixes: 7988fb2c03 ("crypto: s390/aes - convert to skcipher API")
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In function ctr_aes_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. When the buffer is used
explicitly scrub it at the end of the code block to avoid exposure of
maybe sensitive data.
In a similar way the function gcm_aes_crypt() hat an error path where
the CPACF param block was not scrubbed. Instead of return early now
these error paths go to end of function where explicit scrubbing is
done. Similar with the buffers which are part of the gcm_sg_walk
structs from the variables gw_in and gw_out.
Fixes: d07f951903 ("crypto: s390/aes - Fix buffer overread in CTR mode")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.8+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The return codes from skcipher_walk_virt() were not properly checked
before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt().
If skcipher_walk_virt() fails, the walk structure may be in an undefined
state, and attempting to process data could lead to incorrect behavior
or accessing uninitialized memory.
Add proper return code checking to ensure correct handling of the walk
initialization and walk advance and eventually return to the caller
with that return code.
Fixes: 7988fb2c03 ("crypto: s390/aes - convert to skcipher API")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Trace functions check for non-NULL id->areas without lock to minimize
overhead. This opens a race window where a NULL pointer dereference
occurs if id->areas is set to NULL (e.g. via echo 0 > ../pages) after
the check and before id->lock is taken.
Fix this by rechecking id->areas under lock.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit a2cec68637 ("s390/debug: Add s390dbf kernel parameter") calls
debug_get_param() from both debug_info_create() and debug_set_level().
Since debug_get_param() emits the override notice unconditionally, and
drivers typically call debug_set_level() right after debug_register(),
the same line is printed twice per debug area:
s390dbf: 0.0.1234: override level to 6
s390dbf: 0.0.1234: override level to 6
For areas registered per device this is multiplied by the device count.
With 's390dbf=0.0.*:6' a system with many DASDs emits a large number of
redundant lines during boot.
Add a quiet parameter to debug_get_param() and pass quiet=true from
debug_set_level(), where the override has already been announced during
registration. The remaining callers keep printing the notice.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit a2cec68637 ("s390/debug: Add s390dbf kernel parameter")
incorrectly removed a null-id check from debug_set_level(), introducing
a possible NULL pointer dereference for debug-API users that put
debug_register() results unchecked into debug_set_level().
Fix this by moving the check from the internal _debug_set_level()
variant back to the external debug_set_level() wrapper.
Fixes: a2cec68637 ("s390/debug: Add s390dbf kernel parameter")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()]
Cc: stable@vger.kernel.org # v6.19
Fixes: 582cc1b28e ("s390/pai_ext: Enable per-task and system-wide sampling event")
Fixes: 9f66572f28 ("s390/pai_crypto: Enable per-task and system-wide sampling event")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move mutex locking from per CPU allocation to event allocation.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use PAI PMU index value as function argument instead of pointer
to struct perf_event. Only that index value is used inside
functions pai_alloc_cpu() and pai_event_destroy_cpu().
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Fix several tracefs files that did not take the trace_array reference
A trace instance can be created and destroyed in the tracefs "instances"
directory via mkdir and rmdir respectively. The instance is represented by
a trace_array descriptor. Most tracefs files pass the trace_array as the
private data of the inode to the open/read/write functions. Since there is
no locking between the time a task opens a file and the deletion of the
instance (and the freeing of the trace_array), each open needs to get a
reference to the trace_array and each close must remove it. A instance
can't be removed if there's any reference taken on its trace_array. The
open function uses trace_array_get() that takes a lock (preventing removal
of instances) and iterates the list of all existing trace_arrays and if it
finds a match, it takes the reference and releases the lock. If it doesn't
find a match, it causes the open to return -ENODEV.
There were some added files that did not take the trace_array reference
on open that needed to be fixed. Sashiko also correctly pointed out that
there were some files that took an address of an field or element of the
trace_array which had a pointer back to the trace_array to take its
reference on open. But this leaves a slight race between referencing this
element to get the trace_array as the element itself could be freed. To
solve this, some helper functions were created to look for trace_arrays
with this field or element in the search so that the element did not have
to be dereferenced before the trace_array's reference was taken.
- Add a lock around ftrace_ops initialization
When a ftrace_ops is first used by ftrace, some internal initialization is
performed on the ops. But if multiple tasks were calling functions that
did this initialization, it could race and perform doing the
initialization more than once, corrupting the internal data. Add a lock in
the initialization code to prevent this from happening.
- Fix splice reads on mmapped buffers
The logic in the ring buffer splice code for mmapped buffers is supposed
to do a copy of the memory as the mapped buffers can't be given to splice.
But there was an if statement within the copy code that would return a -1
if a request for a full page was done and it wasn't a partial read. This
is because this logic was written before mmapped buffers existed and this
case didn't make sense at the time. For mmapped buffers it makes perfect
sense and by returning early can drop a lot of pages unnecessarily.
- Have the persistent ring buffer validation check nr_subbufs
Sashiko reported that the validation code was relying on the saved
nr_subbufs to match the calculated nr_pages + 1 and if they were off, that
the code could cause corruption. Sashiko is correct, and the saved
nr_subbufs should be validated before assuming it is correct.
- Do not allow more than one instance with the same name on cmdline
If an admin were to add more than one trace instances with the same name
they all would be created, but only the first one would be accessible via
tracefs. This used to not be allowed but some restructuring of code has
since made it possible.
- Fix the race between subbuf resize and trace_pipe_raw readers
If a task was reading trace_pipe_raw while another task was changing the
ring buffer subbuf size, it could crash the reader. The trace_pipe_raw
readers do get their own copy of the page from the buffer, but the code
needs some restructuring to not have the resize of the subbuffers cause
issues.
- Cap the size of the mapped (static) ring buffer nr_pages
The meta data used for ring buffer mapped buffers is 32 bit in size. A
normal ring buffer could (in theory) have more than 4 billion pages.
But this is not allowed by mapped buffers, so enforce it.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCap3GJRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtAfAP9hDPtzctAoz+IHZq+GYejhKTu99ICG
vAxTOZivuG6KYAD/UPA4P7z5ayxGM5UlT+2U81+mpCd55F2oFiIxRuFYcwk=
=/d+T
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix several tracefs files that did not take the trace_array reference
A trace instance can be created and destroyed in the tracefs
"instances" directory via mkdir and rmdir respectively. The instance
is represented by a trace_array descriptor.
Most tracefs files pass the trace_array as the private data of the
inode to the open/read/write functions. Since there is no locking
between the time a task opens a file and the deletion of the instance
(and the freeing of the trace_array), each open needs to get a
reference to the trace_array and each close must remove it.
An instance can't be removed if there's any reference taken on its
trace_array. The open function uses trace_array_get() that takes a
lock (preventing removal of instances) and iterates the list of all
existing trace_arrays and if it finds a match, it takes the reference
and releases the lock. If it doesn't find a match, it causes the open
to return -ENODEV.
There were some added files that did not take the trace_array
reference on open that needed to be fixed. Sashiko also correctly
pointed out that there were some files that took an address of an
field or element of the trace_array which had a pointer back to the
trace_array to take its reference on open. But this leaves a slight
race between referencing this element to get the trace_array as the
element itself could be freed. To solve this, some helper functions
were created to look for trace_arrays with this field or element in
the search so that the element did not have to be dereferenced before
the trace_array's reference was taken.
- Add a lock around ftrace_ops initialization
When a ftrace_ops is first used by ftrace, some internal
initialization is performed on the ops. But if multiple tasks were
calling functions that did this initialization, it could race and
perform doing the initialization more than once, corrupting the
internal data. Add a lock in the initialization code to prevent this
from happening.
- Fix splice reads on mmapped buffers
The logic in the ring buffer splice code for mmapped buffers is
supposed to do a copy of the memory as the mapped buffers can't be
given to splice. But there was an if statement within the copy code
that would return a -1 if a request for a full page was done and it
wasn't a partial read. This is because this logic was written before
mmapped buffers existed and this case didn't make sense at the time.
For mmapped buffers it makes perfect sense and by returning early can
drop a lot of pages unnecessarily.
- Have the persistent ring buffer validation check nr_subbufs
Sashiko reported that the validation code was relying on the saved
nr_subbufs to match the calculated nr_pages + 1 and if they were off,
that the code could cause corruption. Sashiko is correct, and the
saved nr_subbufs should be validated before assuming it is correct.
- Do not allow more than one instance with the same name on cmdline
If an admin were to add more than one trace instances with the same
name they all would be created, but only the first one would be
accessible via tracefs. This used to not be allowed but some
restructuring of code has since made it possible.
- Fix the race between subbuf resize and trace_pipe_raw readers
If a task was reading trace_pipe_raw while another task was changing
the ring buffer subbuf size, it could crash the reader. The
trace_pipe_raw readers do get their own copy of the page from the
buffer, but the code needs some restructuring to not have the resize
of the subbuffers cause issues.
- Cap the size of the mapped (static) ring buffer nr_pages
The meta data used for ring buffer mapped buffers is 32 bit in size.
A normal ring buffer could (in theory) have more than 4 billion
pages. But this is not allowed by mapped buffers, so enforce it.
* tag 'trace-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Use a macro for static buffer bits
tracing: Fix comment in tracing_buffers_splice_read()
ring-buffer: Prevent truncation of nr_pages / nr_subbufs
ring-buffer: Cap static ring buffer nr_pages
tracing: Fix subbuf resize races with trace_pipe_raw readers
tracing: Fix to avoid creating trace instances with duplicate names
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
ring-buffer: Allow splice reads on static buffers
tracing: Take trace_array reference when opening options file
ftrace: Synchronize the initialization of ftrace_ops
ftrace: Take trace_array reference before accessing its ftrace_ops
tracing: Have show_event_filters/triggers files take trace array ref
-----BEGIN PGP SIGNATURE-----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=oz4Z
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"This mainly contains verifier fixes that address bugs reported by
Nicholas Carlini.
- Fix incorrect non-NULL inference in pointer comparisons: pointer
types that may be NULL at runtime, pointers with unbounded offsets,
JMP32 comparisons with zero, and imprecise zero registers (Eduard
Zingerman)
- Fix precision tracking for half-dead zero spills, ld_abs/ld_ind
implicit subprog exit, bpf_loop() callbacks, linked scalar ids and
NULL call arguments (Eduard Zingerman)
- Reject BPF_PSEUDO_FUNC reference to the main program, fix zero
extension of arena 32-bit cmpxchg, don't rewrite bpf_fastcall
patterns entered by a jump (Eduard Zingerman)
- Fix percpu map update and BPF_F_CPU validation with sparse CPU IDs
(Hui Su)
- Fix NULL-ptr-derefs in bpf_snprintf_btf() for void and VAR types,
and reject key-less BTF for hash maps (Jiayuan Chen)
- Various fixes (Kumar Kartikeya Dwivedi):
- Fix out-of-bounds access in disassembler on invalid LDSX
instruction
- mark siginfo of signal tracepoints as scalar and
sched_process_wait argument as nullable
- mark faultable stack helpers as sleepable
- reject tail calls and legacy packet loads from callbacks
- enforce rbtree callback lock restrictions for resilient locks
- require MEM_PERCPU for percpu kptr stores
- clear NON_OWN_REF after RCU protection ends
- mark NULL kptr stores precise
- preserve inner map identity in callback frames
- reject non-scalar bpf_loop() iteration counts
- Fix trampoline allocation slowdown on x86 by using
EXECMEM_MODULE_DATA (Mike Rapoport)
- Keep bpf_refcount_acquire() nullable for borrowed RCU kptrs and
reject untrusted allocated-object pointers (Ning Ding)
- Fix special fields handling in recycled rhtab elements (Nuoqi Gui,
Yuan Chen)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (86 commits)
bpf, riscv: Make arena support depend on ZACAS
selftests/bpf: Test pointer bpf_loop iteration count rejection
bpf: Reject non-scalar bpf_loop iteration counts
bpf: use mark_arg_precision() in check_mem_size_reg()
bpf: propagate mark_chain_precision() errors out of loop_flag_is_zero()
selftests/bpf: precision of a NULL global subprogram BTF_ID argument
bpf: mark a NULL BTF_ID argument of a global subprogram precise
selftests/bpf: precision of a NULL kfunc argument
bpf: mark a NULL kfunc argument precise
selftests/bpf: precision of a NULL global subprogram memory argument
bpf: mark a NULL memory argument of a call precise
selftests/bpf: precision of a NULL helper argument
bpf: mark a NULL call argument precise
selftests/bpf: Test inner map identities in callbacks
bpf: Preserve inner map identity in callback frames
selftests/bpf: Test imprecise scalar kptr stores
bpf: Mark NULL kptr stores precise
selftests/bpf: Test rhtab kptr cancellation semantics
bpf: Cancel special fields when recycling rhtab elements
selftests/bpf: Test timer field on recycled rhtab element
...
- Fix a timestamping bug in pick_task_fair() and
yield_task_fair() (Zhan Xusheng)
- Skip migrate-disabled tasks when picking a push
candidate in the RT and DL schedulers (Seiji Nishikawa)
- Skip rq->avg_idle update without a valid idle_stamp
(Shubhang Kaushik)
- Fix throttling bug in throttle_cfs_rq(), caused
by the recent single-runqueue conversion (Wanwu Li)
- Fix bandwidth calculation bug in distribute_cfs_runtime(),
caused by the single-runqueue conversion (Wanwu Li)
- Don't make x86 ITMT enablement depend on debugfs (Mario Limonciello)
- Avoid creating misfits during cache-aware load-balancing
on hybrid systems (Tim Chen)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8l0J
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a timestamping bug in pick_task_fair() and yield_task_fair()
(Zhan Xusheng)
- Skip migrate-disabled tasks when picking a push candidate in the
RT and DL schedulers (Seiji Nishikawa)
- Skip rq->avg_idle update without a valid idle_stamp (Shubhang
Kaushik)
- Fix throttling bug in throttle_cfs_rq(), caused by the recent
single-runqueue conversion (Wanwu Li)
- Fix bandwidth calculation bug in distribute_cfs_runtime(),
caused by the single-runqueue conversion (Wanwu Li)
- Don't make x86 ITMT enablement depend on debugfs (Mario Limonciello)
- Avoid creating misfits during cache-aware load-balancing on hybrid
systems (Tim Chen)
* tag 'sched-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Avoid creating misfits during cache-aware balancing
x86/itmt: Don't make ITMT enablement depend on debugfs
sched/fair: Use cfs_rq->h_curr in distribute_cfs_runtime()
sched/fair: Use cfs_rq->h_curr in throttle_cfs_rq()
sched/core: Skip rq->avg_idle update without a valid idle_stamp
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
sched/fair: Use update_curr_eevdf() for the remaining root cfs_rq callers
- Skip empty AUX records with only format flags
(Leo Yan)
- Fix use-after-free when perf mmap() revival races with the
last munmap() (Yilin Zhang, Weiming Shi)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ffvz
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Skip empty AUX records with only format flags (Leo Yan)
- Fix use-after-free when perf mmap() revival races with the
last munmap() (Yilin Zhang, Weiming Shi)
* tag 'perf-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix use-after-free when perf mmap() revival races with the last munmap()
perf/core: Skip empty AUX records with only format flags
- Fix a softirq processing delay bug in local_interrupt_disable(),
which should mostly only affect the Rust runtime (Boqun Feng)
- Remove the hardirq_disable_count() function which caused the
previous bug and is now unused & unnecessary (Boqun Feng)
- lockdep: Invalidate stale class_cache entries for zapped classes
(Eric Dumazet)
- Fix rt_mutex specific futex scheduling helpers
(Sebastian Andrzej Siewior)
- Fix rcuwait use-after-free race during futex requeue PI (Yao Kai)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vEuZ
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a softirq processing delay bug in local_interrupt_disable(),
which should mostly only affect the Rust runtime (Boqun Feng)
- Remove the hardirq_disable_count() function which caused the
previous bug and is now unused & unnecessary (Boqun Feng)
- lockdep: Invalidate stale class_cache entries for zapped classes
(Eric Dumazet)
- Fix rt_mutex specific futex scheduling helpers
(Sebastian Andrzej Siewior)
- Fix rcuwait use-after-free race during futex requeue PI (Yao Kai)
* tag 'locking-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent rcuwait use-after-free during requeue PI
futex: Provide rt_mutex_.*_schedule() equivalents for futex scheduling
locking/lockdep: Invalidate stale class_cache entries for zapped classes
preempt: Remove hardirq_disable_count()
interrupt: Disable interrupt before modifying hardirq_disable counter
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch (Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=54qE
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ subsystem fixes from Ingo Molnar:
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch
(Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
* tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: Fix the unit of the hwspinlock timeout
Revert "irqchip/mbigen: Fix mbigen node address layout"
irqdomain: Delete irq_domain_add_linear()
Here is a single virtio console fix for 7.3-rc2 to fix a much reported
regression in 7.3-rc1, sorry about that. It's not been in linux-next,
but it has been sent by many different developers to resolve the issue
and is "obviously" correct.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCap0yag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykbSwCcDmF2b0gZnZY3LaaJjdryq8yXP8cAnjEGPEl9
OcipLpPGvj6dq+5Xv2qE
=5+1N
-----END PGP SIGNATURE-----
Merge tag 'tty-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull virtio console fix from Greg KH:
"Here is a single virtio console fix for 7.3-rc2 to fix a much reported
regression in 7.3-rc1, sorry about that. It's not been in linux-next,
but it has been sent by many different developers to resolve the issue
and is 'obviously' correct"
* tag 'tty-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
virtio_console: allocate the port_buffer with the caller's gfp
Here are some small staging driver fixes to resolve some reported bugs
that have been found, and tested, in a few staging drivers in 7.3-rc1.
Included in here are:
- OOB read problem fixes in the rtl8723bs driver
- fbtft driver fix
- sm750fb driver fix
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCap0zHA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylsuwCfc6ycZ0QbcKpiDZpzijDTduvUh1IAnAky4xi7
rNKgULapaYP63Mt0exzR
=Cajg
-----END PGP SIGNATURE-----
Merge tag 'staging-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes to resolve some reported bugs
that have been found, and tested, in a few staging drivers in 7.3-rc1.
Included in here are:
- OOB read problem fixes in the rtl8723bs driver
- fbtft driver fix
- sm750fb driver fix
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit()
staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr()
staging: fbtft: make dirty_lock IRQ-safe
Here are some small USB driver fixes for reported problems and
regressions. Include in here are:
- xhci driver fixes
- cdns3 driver fixes
- usb gadget driver fixes for syzbot found problems
- typec driver fixes for broken hardware and other bugs found
- kernel data leaks in mdc800 driver
- usb storage driver fixes
- other small USB driver fixes
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCap0z6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynS5QCfbHGkxWTxkZ5dhvMn0Xs4/+ekE1QAn35xFYmZ
SzXW+Kqkf7nMhxHo9yj0
=L8pK
-----END PGP SIGNATURE-----
Merge tag 'usb-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported problems and
regressions. Include in here are:
- xhci driver fixes
- cdns3 driver fixes
- usb gadget driver fixes for syzbot found problems
- typec driver fixes for broken hardware and other bugs found
- kernel data leaks in mdc800 driver
- usb storage driver fixes
- other small USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: qcom-pmic-typec: drain cc_debounce_dwork if port_start() fails
usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop
usb: gadget: fix null pointer dereference in usb_put_function_instance()
usb: typec: qcom-pmic: cancel reset_work on stop
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
usb: f_mass_storage: Bump local buffer size in fsg_common_create_luns()
usb: storage: realtek_cr: fix use-after-free on disconnect
usb: cdnsp: fix wakeup from S3 after controller context loss
usb-storage: ene_ub6250: fix race between scan work and probe
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
usb: gadget: f_midi: initialize work in f_midi_alloc()
usb: gadget: f_midi2: fix use-after-free in string attribute show path
usb: typec: tipd: Fix Thunderbolt altmode VDOs for cd321x
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
usb: typec: hd3ss3220: track VBUS enable state per consumer
usb: dwc3: clear forceRM when issuing EndTransfer
usb: dwc3: google: Initialise probe properties with DWC3_DEFAULT_PROPERTIES
usb: typec: mux: avoid duplicated mux switches
usb: typec: mux: Fix typec_switch_match()
usb: image: mdc800: change kmalloc() to kzalloc()
...
The arena range tree allocates its nodes with kmalloc_nolock() since
commit f8c67d8550 ("bpf: Use kmalloc_nolock() in range tree").
kmalloc_nolock() requires slab caches with cmpxchg128 support
(__CMPXCHG_DOUBLE); on riscv cmpxchg128 is provided by the ZACAS
extension. On systems without ZACAS every arena map creation fails
with a misleading -ENOMEM.
Report the missing support instead: make bpf_jit_supports_arena()
return system_has_cmpxchg128() where it is defined, so arena map
creation fails with -EOPNOTSUPP on systems without ZACAS. The macro
is only defined when both CONFIG_RISCV_ISA_ZACAS and
CONFIG_TOOLCHAIN_HAS_ZACAS are enabled, so guard it with #ifdef the
same way mm/slab.h consumes it, and reject arena otherwise. This
matches how arena BPF_CMPXCHG instructions are already gated on ZACAS
in bpf_jit_supports_insn().
Fixes: f8c67d8550 ("bpf: Use kmalloc_nolock() in range tree")
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Acked-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260902061451.1416-1-cp0613@linux.alibaba.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add a verifier test that leaves the raw tracepoint context pointer in R1
when calling bpf_loop(). This is the smallest trigger for the incorrect
precision backtracking: it reuses an existing callback and needs no maps or
userspace setup.
Expect an ordinary scalar-type rejection. Without the verifier fix, the
test instead reaches precision backtracking and reports an internal
"backtracking misuse" error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260905014735.1452988-3-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing.
Fixes: bb124da69c ("bpf: keep track of max number of bpf_loop callback iterations")
Reported-by: syzbot+7b47f87674e9a1569110@syzkaller.appspotmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260905014735.1452988-2-memxor@gmail.com
Closes: https://lore.kernel.org/bpf/6a9ad24c.b5d4176b.238c3e.0001.GAE@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
- Run scripts/coccinelle/api/kmalloc_objs.cocci for v7.3
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCapuwVwAKCRA2KwveOeQk
u5EeAP9TS7K4iVlw3KlZHuLIK2q+CQfALPepcu+ME2lO5dta4gEAxCTi0ZXmU7OT
XbmWUd+DTkKNYCBW8E6Lvn72Er13uQs=
=ZtN4
-----END PGP SIGNATURE-----
Merge tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversions from Kees Cook:
"Another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules
in scripts/coccinelle/api/kmalloc_objs.cocci"
* tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: refresh kmalloc_obj() conversions
drm/amd/display: Fix harmless type mismatch in allocation
- Fix kernfs listxattr() not returning security xattr names (e.g.
SELinux labels) when the kernfs node has no allocated kernfs_iattrs
- Fix silent truncation of IRQ vector indices in the Rust PCI
abstractions
- Don't select OF from DRIVER_PE_KUNIT_TEST; skip the test when OF is
disabled instead of silently enabling extra kernel functionality
- Russ Weight is retiring from kernel development; update the Firmware
Loader sysfs contact to the driver-core mailing list, add a CREDITS
entry for Firmware Upload, and update MAINTAINERS accordingly
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCapxQTQAKCRBFlHeO1qrK
Lr1NAQD09hhWzsAkRvdDgf/rd3iUW4Fxro/KOIf+OThNRgWpRQD4+hMNQqxzk3OB
QT3xFMqLPFtLf+voWTcWniC6UsLfCA==
=k/Gx
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix kernfs listxattr() not returning security xattr names (e.g.
SELinux labels) when the kernfs node has no allocated kernfs_iattrs
- Fix silent truncation of IRQ vector indices in the Rust PCI
abstractions
- Don't select OF from DRIVER_PE_KUNIT_TEST; skip the test when OF is
disabled instead of silently enabling extra kernel functionality
- Russ Weight is retiring from kernel development; update the Firmware
Loader sysfs contact to the driver-core mailing list, add a CREDITS
entry for Firmware Upload, and update MAINTAINERS accordingly
* tag 'driver-core-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Remove Russ Weight from Firmware Loader
CREDITS: Add CREDITS entry for Firmware Upload
firmware_loader: Change contact for sysfs nodes
rust: pci: reject IRQ vector indices that do not fit in u32
kernfs: preserve security xattrs without allocating iattrs
drivers: base: test: DRIVER_PE_KUNIT_TEST should not select OF
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmqb6gQWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImeuBkD/9SNpBtFcumYkl1S3FUSTC8Up5k
8exUSd6bJr/lc5+cPJcY4VZLOus8ueKjJuKXQE0C3Id6Cd8g1MGZUQVGXIWYz2Sx
69z2rhYkE4b386ivNutwCzA7Bjlb/rMZEeDGfEuRe2eVOH2o8ADiLG+ANNUHbpWt
zTbLUiBOFD2sfWL2fSShcBJthYF7QTBh54jlL56HBleWMdq6y4ii7rh1X+6RFgNg
xRi7s/4+FLxh+F+1GOVrPvIuNrqQaTgWVASsmmRE56n66WOFeVgsG4NVi0/i0f9Z
MLHp/QeSx5/OtIhjjt9BkV+0E2tXAUMEOalj0HpaDBxsfAjAFLDt7TRra9BhV+aI
FrEnbIwG809BYAjRO2scf4khtrLofZpIv+STt+vbKjFYEv2Z03x/2JS6Tg9gGmtN
wP1GfzfPgk8FgdbQ4pgT354COYr1Ey+OU1tjNTmmYMYN7WmXmGG9Yx7LfrtvsNU9
ohFeHyTygAcw/bE1/IdWqFK7DP6V5LuOoeOtfuEnRC/SFHdGbr2fvu3dfZSK06kE
CWY9QSF7J8MfLNhgRi4/Q0QxRtdekDyANZezS2uwNv1Hn6Pwt9rXMScMiyWkNSg7
6oltWiIrXx5lMBCHDciNWyAR+mQe3/G8YUPnrpPWsfMcOelvfMN/RWtYWMalevZ5
YY9ufXSCGMQQDBPFDQ==
=SgJ4
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix build errors when RUST and KASAN enabled
- fix a typo in comment of vmlinux.lds.S
- fix several bugs in Kprobes, BPF JIT and KVM support
* tag 'loongarch-fixes-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
perf build: Add clang and rust target flags for LoongArch
LoongArch: KVM: Fix TOCTOU race on pv_features
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY
LoongArch: KVM: Remove unused function kvm_arch_flush_remote_tlbs_memslot()
LoongArch: KVM: Fix resource leak in kvm_loongarch_env_init() error path
LoongArch: KVM: Add unregister helpers for the KVM interrupt devices
LoongArch: KVM: Free init resources if kvm_init() fails
LoongArch: BPF: Fix off-by-one error for insn_is_cast_user()
LoongArch: Avoid preempt count underflow without probe
LoongArch: Do not save/restore percpu base register in rethook trampoline
LoongArch: Remove unused setup_profiling_timer() function
LoongArch: Fix typo "avaliable" in comment of vmlinux.lds.S
LoongArch: Do not select HAVE_RUST when KASAN is enabled
put_chars() runs from the hvc console write path with preemption
disabled, so it asks alloc_buf() for GFP_ATOMIC. Only the data buffer
gets it: the struct port_buffer itself keeps the GFP_KERNEL default, so
the allocation can enter direct reclaim and sleep. A write to /dev/kmsg
on a CONFIG_DEBUG_ATOMIC_SLEEP kernel splats:
BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:320
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: virtme-ng-init
preempt_count: 1, expected: 0
Preemption disabled at:
[<ffffffff813fd90d>] vprintk_emit+0x17d/0x510
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
__might_resched+0x37a/0x4d0
__kmalloc_cache_noprof+0x94/0x5f0
put_chars+0x209/0x3e0
hvc_console_print+0x234/0x640
console_flush_all+0x4fc/0x950
console_unlock+0xbf/0x1b0
vprintk_emit+0x312/0x510
devkmsg_emit+0xba/0x110
devkmsg_write+0x21b/0x2e0
vfs_write+0x4dc/0x9d0
ksys_write+0x108/0x1e0
do_syscall_64+0xfa/0x460
</TASK>
Pass gfp on to that allocation too.
Fixes: fc220d6be3 ("virtio_console: refactor __send_to_port() buffer ownership")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Sungho Bae <baver.bae@lge.com>
Tested-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260810-serial-v1-1-abbe51602c13@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=z6qW
-----END PGP SIGNATURE-----
Merge tag 'for-7.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- preserve inode compression level when changing attributes
- fix lost wakeup when waiting for a zstd workspace
- fix bio context leaks after ordered extent processing errors
- in send, handle unexpected extents for non-regular inodes
- handle edge case in creation of reloc tree with enabled quotas
- in scrub report the exact failing offset, not the stripe base
- error handling fixes
- error code propagation in send, zoned mode and raid-stripe-tree
- restore active device pointer after seeding device addition error
- transaction abort fixups
- update Chris' email address
* tag 'for-7.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: update Chris Mason's email address
btrfs: tests: do not touch page cache if root/inode allocation failed
btrfs: zstd: fix lost wakeup when waiting for a workspace
btrfs: do not force reloc root creation during qgroup_account_snapshot()
btrfs: send: fix lost error return value in will_overwrite_ref()
btrfs: abort transaction before releasing tree_log_mutex on commit failure
btrfs: zoned: propagate do_zone_finish() error in btrfs_zone_finish_endio()
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
btrfs: send: reject extents for non-regular inodes
btrfs: return proper negative error code for update_raid_extent_item()
btrfs: fix the possible bioc_list memory leak during error
btrfs: fix transaction use-after-free in raid stripe insertion
btrfs: scrub: report the failing sector's address, not the stripe base
btrfs: preserve the compression property when other inode flags change
btrfs: restore active device pointers after failed sprout
btrfs: detach failed sprout device from transaction update list
btrfs: clean up target device if block group marking fails
2 enhancements to add support and MCQ for additional Intel 4.0
controller types. The rest are all driver fixes, the largest of which is
the mpi3mr target use after free fix, follwed by a similar TOCTOU fix
for io_uring passthrough in bsg.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCapw/mRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIXurAD7BFNaHlTRLIlurYSeMYOV0ZVQQXR9GsW8
1KQhJW1W6GABAIr7L81Gm1jTUa+CuXixW2N9tv8PBsXx627eWyRZ7tyb
=9pG9
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two enhancements to add support and MCQ for additional Intel 4.0
controller types.
The rest are all driver fixes, the largest of which is the mpi3mr
target use after free fix, follwed by a similar TOCTOU fix for
io_uring passthrough in bsg"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi: bsg: Cap io_uring sense copy to max_response_len
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
scsi: mpi3mr: Fix use-after-free on tgt_dev->starget during target device refresh/update
scsi: target: iscsi: Reserve a terminator byte for the login payload
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
scsi: ufs: ufs-pci: Add MCQ support for Intel UFS 4.0 controllers
scsi: ufs: ufs-pci: Add support for Intel UFS 4.0 HS-Gear5
scsi: sg: Report request-table problems when any status is set
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
scsi: ufs: ufs-qcom: Fix sequential read variance
scsi: ufs: ufs-qcom: Restore HS/LS link startup mode for Qualcomm UFS controller v6.2+
scsi: ibmvfc: Document protocol parameter of ibmvfc_alloc_target()
scsi: ibmvfc: Fix kernel-doc name for ibmvfc_scsi_relogin()
scsi: pm8001: Use rollback index when freeing MSI-X vectors
scsi: fnic: Initialize the NVMe local port info before registering
-----BEGIN PGP SIGNATURE-----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=4ZE+
-----END PGP SIGNATURE-----
Merge tag 'block-7.3-20260905' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- nvme-tcp fixes for an out-of-bounds write on an over-long PDU
- nvmet-tcp, nvmet-rdma and nvme-rdma leak and cleanup-ordering
fixes
- FDP placement id array racy access fix
- nvme-fc double free of fabrics options on nvme_add_ctrl()
failure, and a secret leak failure
- Fault injection opcode filtering
- stale namespace removal during scan
- Various other smaller fixes and cleanups
- Flag zoned disks with GENHD_FL_NO_PART
- Save the page offset gaps in a cloned bio
- Fix dma_alignment for large or unreported limits in loop and zloop
- Clear VM_MAYWRITE on a read-only ublk char device mmap
* tag 'block-7.3-20260905' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (25 commits)
nvme-tcp.h: drop kernel-doc comments, fix a few descriptions
nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails
nvmet: reject namespace enable without device path
nvmet-auth: Synchronize timeout work during SQ teardown
MAINTAINERS: update nvme entry
nvmet-tcp: reject unsolicited H2CData PDUs
nvme-tcp: defer TLS inline send to io_work
nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU
nvme-tcp: return -EPROTO for a C2HData on a write
nvmet: print namespace IDs as unsigned 32bit value
nvme: print namespace IDs as unsigned 32bit value
nvme: remove stale namespaces by NSID range during scan
nvme: add missing SRCU grace period in error path
nvme-fabrics: fix DHCHAP secret leak on parse failure
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
loop, zloop: fix dma_alignment for large or unreported limits
block: save page offset gaps in cloned bio
block: flag zoned disks with GENHD_FL_NO_PART
nvmet-rdma: fix queue leak when connect backlog is exceeded
nvme: add opcode filtering for fault injection
...
