When stopping MCC, FW can stop at a given MCC role following H2C command.
When pausing chanctx during MCC, in general, the caller expects to process
things with its chanctx. So, pass the caller as target and let FW stop MCC
at it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250511035217.10410-2-pkshih@realtek.com
RTL8811AU stops responding during the firmware download on some systems:
[ 809.256440] rtw_8821au 5-2.1:1.0: Firmware version 42.4.0, H2C version 0
[ 812.759142] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: renamed from wlan0
[ 837.315388] rtw_8821au 1-4:1.0: write register 0x1ef4 failed with -110
[ 867.524259] rtw_8821au 1-4:1.0: write register 0x1ef8 failed with -110
[ 868.930976] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: entered promiscuous mode
[ 897.730952] rtw_8821au 1-4:1.0: write register 0x1efc failed with -110
Maybe it takes too long when writing the firmware 4 bytes at a time.
Write 196 bytes at a time for RTL8821AU, RTL8811AU, and RTL8812AU,
and 254 bytes at a time for RTL8723DU. These are the sizes used in
their official drivers. Tested with all these chips.
Cc: stable@vger.kernel.org
Link: https://github.com/lwfinger/rtw88/issues/344
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/43f1daad-3ec0-4a3b-a50c-9cd9eb2c2f52@gmail.com
RTL8811AU stops responding during the firmware download on some systems:
[ 809.256440] rtw_8821au 5-2.1:1.0: Firmware version 42.4.0, H2C version 0
[ 812.759142] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: renamed from wlan0
[ 837.315388] rtw_8821au 1-4:1.0: write register 0x1ef4 failed with -110
[ 867.524259] rtw_8821au 1-4:1.0: write register 0x1ef8 failed with -110
[ 868.930976] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: entered promiscuous mode
[ 897.730952] rtw_8821au 1-4:1.0: write register 0x1efc failed with -110
Each write takes 30 seconds to fail because that's the timeout currently
used for control messages in rtw_usb_write().
In this scenario the firmware download takes at least 2000 seconds.
Because this is done from the USB probe function, the long delay makes
other things in the system hang.
Reduce the timeout to 500 ms. This is the value used by the official USB
wifi drivers from Realtek.
Of course this only makes things hang for ~30 seconds instead of ~30
minutes. It doesn't fix the firmware download.
Tested with RTL8822CU, RTL8812BU, RTL8811CU, RTL8814AU, RTL8811AU,
RTL8812AU, RTL8821AU, RTL8723DU.
Cc: stable@vger.kernel.org
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Link: https://github.com/lwfinger/rtw88/issues/344
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1e35dd26-3f10-40b1-b2b4-f72184a26611@gmail.com
RX tag is sequence number to ensure RX DMA is complete. On platform
Gigabyte X870 AORUS ELITE WIFI7, sometimes it needs longer retry times
to complete RX DMA, or driver throws warnings and connection drops:
rtw89_8922ae 0000:07:00.0: failed to update 162 RXBD info: -11
rtw89_8922ae 0000:07:00.0: failed to update 163 RXBD info: -11
rtw89_8922ae 0000:07:00.0: failed to update 32 RXBD info: -11
rtw89_8922ae 0000:07:00.0: failed to release TX skbs
Fixes: 0bc7d1d4e6 ("wifi: rtw89: pci: validate RX tag for RXQ and RPQ")
Reported-by: Samuel Reyes <zohrlaffz@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/f4355539f3ac46bbaf9c586d059a8cbb@realtek.com/T/#t
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250509013433.7573-1-pkshih@realtek.com
Due to mac80211 triggering the hardware to enter idle mode, it fails
to install WEP key causing connected station can't ping successfully.
Currently, it forces the hardware to leave idle mode before driver
adding WEP keys.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250507031203.8256-1-pkshih@realtek.com
Add documentation on how to calculate the access coordinates for a given
CXL region in detail.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250515000923.2590820-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add description in the SRAT document to describe the Generic Port
Affinity sub-table.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250515000923.2590820-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmghHIMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQP4H/0nzYeRJaWdhar4B
tb3tOUyHpokhqNpWYA+fSxq83H1yTuxv3PoHDJg1OEXfmwmfKS8+UelkBZX+fl/q
gfUz9CdmgMfXyXHw3jQnDGx6IwBDT5z3GfKbmFyzft8vqMyfGSGYmfdSaR+MZrD6
WxxCyNgPWGkT41MgvHW8JAH8Hj+yyzpu7uqx3LIS2KA3dJcxZGJUYC3uA2UBIuGD
CmTuWaG6zY4uTtiAOXUscKyA9wCh7cawTLJKAtc6SEpzAbMmZ3nUiOAVoKf70R0t
EqH16aToV+th/zUvCuPKT3bWIkiNxDsibtwfW9fIJ8aZnQuvO/bK4ygHXjy8C/vc
PUaWMIA=
=evf8
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc6' into next
Sync up with mainline to bring in xpad controller changes.
'realpath' is not always available, fallback to 'readlink -f' if is not
available. They seem to work equally well in this context.
Link: https://lore.kernel.org/r/20250318160510.3441646-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, when EROFS is built with per-CPU workers, the workers are
started and CPU hotplug hooks are registered during module initialization.
This leads to unnecessary worker start/stop cycles during CPU hotplug
events, particularly on Android devices that frequently suspend and resume.
This change defers the initialization of per-CPU workers and the
registration of CPU hotplug hooks until the first EROFS mount. This
ensures that these resources are only allocated and managed when EROFS is
actually in use.
The tear down of per-CPU workers and unregistration of CPU hotplug hooks
still occurs during z_erofs_exit_subsystem(), but only if they were
initialized.
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250506225743.308517-1-dhavale@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
1. Prepare for support MT8195/88 HDMIv2 and DDCv2
2. DPI: Cleanups and add support for more formats
3. Cleanups and sanitization
4. Replace custom compare_dev with component_compare_of
-----BEGIN PGP SIGNATURE-----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=bcEP
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-20250515' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next - 20250515
1. Prepare for support MT8195/88 HDMIv2 and DDCv2
2. DPI: Cleanups and add support for more formats
3. Cleanups and sanitization
4. Replace custom compare_dev with component_compare_of
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250514233647.15907-1-chunkuang.hu@kernel.org
The main user reported ones are:
- Fix a btree iterator locking inconsistency that's been causing us to
go emergency read-only in evacuate: "Fix broken btree_path lock
invariants in next_node()"
- Minor btree noed cache reclaim tweak that should help with OOMs: don't
set btree nodes as accessed on fill
- Fix a bch2_bkey_clear_rebalance() issue that was causing rebalance to
do needless work
-----BEGIN PGP SIGNATURE-----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=Vjm2
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-05-15' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"The main user reported ones are:
- Fix a btree iterator locking inconsistency that's been causing us
to go emergency read-only in evacuate: "Fix broken btree_path lock
invariants in next_node()"
- Minor btree node cache reclaim tweak that should help with OOMs:
don't set btree nodes as accessed on fill
- Fix a bch2_bkey_clear_rebalance() issue that was causing rebalance
to do needless work"
* tag 'bcachefs-2025-05-15' of git://evilpiepirate.org/bcachefs:
bcachefs: fix wrong arg to fsck_err()
bcachefs: Fix missing commit in backpointer to missing target
bcachefs: Fix accidental O(n^2) in fiemap
bcachefs: Fix set_should_be_locked() call in peek_slot()
bcachefs: Fix self deadlock
bcachefs: Don't set btree nodes as accessed on fill
bcachefs: Fix livelock in journal_entry_open()
bcachefs: Fix broken btree_path lock invariants in next_node()
bcachefs: Don't strip rebalance_opts from indirect extents
Increase the maximum server-side RPC payload to 4MB. The default
remains at 1MB.
An API to adjust the operational maximum was added in 2006 by commit
596bbe53eb ("[PATCH] knfsd: Allow max size of NFSd payload to be
configured"). To adjust the operational maximum using this API, shut
down the NFS server. Then echo a new value into:
/proc/fs/nfsd/max_block_size
And restart the NFS server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We'd like to increase the maximum r/wsize that NFSD can support,
but without introducing possible regressions. So let's add a
default setting of 1MB. A subsequent patch will raise the
maximum value but leave the default alone.
No behavior change is expected.
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The 8192-byte maximum is a protocol-defined limit, and we already
have a symbolic constant defined whose name matches the name of
the limit defined in the protocol. Replace the duplicate.
No change in behavior is expected.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: The documenting comment for NFSD_BUFSIZE is quite stale.
NFSD_BUFSIZE is used only for NFSv4 Reply these days; never for
NFSv2 or v3, and never for RPC Calls. Even so, the byte count
estimate does not include the size of the NFSv4 COMPOUND Reply
HEADER or the RPC auth flavor.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It is no longer used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow allocation of more entries in the sc_pages[] array when the
maximum size of an RPC message is increased.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow allocation of more entries in the rc_pages[] array when the
maximum size of an RPC message is increased.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, make sk_pages a flexible array.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: This array is no longer used.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_vec[] array accounts for 4144 bytes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If we can get rid of all uses of rq_vec, then it can be removed.
Replace one use of rqstp::rq_vec with rqstp::rq_bvec.
The feeling of layering violation grows stronger now that
<linux/sunrpc/xdr.h> is included in fs/nfsd/vfs.c.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
All three call sites do the same thing.
I'm struggling with this a bit, however. struct xdr_buf is an XDR
layer object and unmarshaling a WRITE payload is clearly a task
intended to be done by the proc and xdr functions, not by VFS. This
feels vaguely like a layering violation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If we can get rid of all uses of rq_vec, then it can be removed.
Replace one use of rqstp::rq_vec with rqstp::rq_bvec.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_bvec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
The rq_bvec[] array contains enough bio_vecs to handle each page in
a maximum size RPC message.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_bvec[] array is 4144 bytes. This patch replaces that array
with a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_vec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_pages[] array is 2080 bytes. This patch replaces that with
a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The server's backchannel uses struct svc_rqst, but does not use the
pages in svc_rqst::rq_pages. It's rq_arg::pages and rq_res::pages
comes from the RPC client's page allocator. Currently,
svc_init_buffer() skips allocating pages in rq_pages for that
reason.
Except that, svc_rqst::rq_pages is filled anyway when a backchannel
svc_rqst is passed to svc_recv() -> and then to svc_alloc_arg().
This isn't really a problem at the moment, except that these pages
are allocated but then never used, as far as I can tell.
The problem is that later in this series, in addition to populating
the entries of rq_pages[], svc_init_buffer() will also allocate the
memory underlying the rq_pages[] array itself. If that allocation is
skipped, then svc_alloc_args() chases a NULL pointer for ingress
backchannel requests.
This approach avoids introducing extra conditional logic in
svc_alloc_args(), which is a hot path.
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This page count is to be used to allocate various arrays of pages
and bio_vecs, replacing the fixed RPCSVC_MAXPAGES value.
The documenting comment is somewhat stale -- of course NFSv4
COMPOUND procedures may have multiple payloads.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is an upper bound on the number of rdma_rw contexts that can
be created per QP.
This invisible upper bound is because rdma_create_qp() adds one or
more additional SQEs for each ctxt that the ULP requests via
qp_attr.cap.max_rdma_ctxs. The QP's actual Send Queue length is on
the order of the sum of qp_attr.cap.max_send_wr and a factor times
qp_attr.cap.max_rdma_ctxs. The factor can be up to three, depending
on whether MR operations are required before RDMA Reads.
This limit is not visible to RDMA consumers via dev->attrs. When the
limit is surpassed, QP creation fails with -ENOMEM. For example:
svcrdma's estimate of the number of rdma_rw contexts it needs is
three times the number of pages in RPCSVC_MAXPAGES. When MAXPAGES
is about 260, the internally-computed SQ length should be:
64 credits + 10 backlog + 3 * (3 * 260) = 2414
Which is well below the advertised qp_max_wr of 32768.
If RPCSVC_MAXPAGES is increased to 4MB, that's 1040 pages:
64 credits + 10 backlog + 3 * (3 * 1040) = 9434
However, QP creation fails. Dynamic printk for mlx5 shows:
calc_sq_size:618:(pid 1514): send queue size (9326 * 256 / 64 -> 65536) exceeds limits(32768)
Although 9326 is still far below qp_max_wr, QP creation still
fails.
Because the total SQ length calculation is opaque to RDMA consumers,
there doesn't seem to be much that can be done about this except for
consumers to try to keep the requested rdma_rw ctxt count low.
Fixes: 2da0f610e7 ("svcrdma: Increase the per-transport rw_ctx count")
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add bootph-pre-ram hinting to jh7110-common.dtsi:
- i2c5_pins and i2c-pins subnode for connection to eeprom
- eeprom node
- qspi flash configuration subnode
- memory node
- mmc0 for eMMC
- mmc1 for SD Card
- uart0 for serial console
With this the U-Boot SPL secondary program loader may drop such overrides.
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
StarFive VisionFive2 and similar JH7110 boards have an eeprom compatible
with Atmel 24c04. Add the node so this may be used with the at24 driver.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Use qspi flash read-delay and spi-max-frequency settings compatible with
U-Boot bootloader.
Observations from testing on Pine64 Star64 hardware within U-Boot bootloader
and read-delay=2 are spi-max-frequency less than 49.8MHz fails to write,
corrupt data writes at 25MHz to 49.799999MHz, and valid data writes at
49.8MHz to 100MHz (not tested above 100MHz). No valid spi-max-frequency
was found for 1<read-delay<=3 and corrupt data with read-delay=3.
Looking around the Linux codebase it is common to see read-delay 2 cycles
with spi-max-frequency 100MHz and testing confirms this to work in both
U-Boot and Linux.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add syscrg clock assignments for CPU, BUS, PERH, and QSPI as required by
boot loader before kernel.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The pin names of MMC0 pinmux is defined in the pinctrl dt binding header
associated with starfive,jh7110-pinctrl .
Include the header file and use these names instead of raw numbers for
defining MMC0 pinmux.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add usb_cdns3 and usb0_pins configuration to support super speed USB
device on the FML13V01 board.
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Most H2G messages are FAST_REQ which means no synchronous response is
expected. The messages are sent as fire-and-forget with no tracking.
However, errors can still be returned when something goes unexpectedly
wrong. That leads to confusion due to not being able to match up the
error response to the originating H2G.
So add support for tracking the FAST_REQ H2Gs and matching up an error
response to its originator. This is only enabled in XE_DEBUG builds
given that such errors should never happen in a working system and
there is an overhead for the tracking.
Further, if XE_DEBUG_GUC is enabled then even more memory and time is
used to record the call stack of each H2G and report that with the
error. That makes it much easier to work out where a specific H2G came
from if there are multiple code paths that can send it.
v2: Some re-wording of comments and prints, more consistent use of #if
vs stub functions - review feedback from Daniele & Michal).
v3: Split config change to separate patch, improve a debug print
(review feedback from Michal).
v4: Bunch of minor tweaks (review feedback from Michal).
Original-i915-code: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512215324.1457009-5-John.C.Harrison@Intel.com
Rename XE_LARGE_GUC_BUFFER to XE_DEBUG_GUC to allow for more debug
only code (in subsequent patch) without adding more config defines
that each control only a single thing.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512215324.1457009-4-John.C.Harrison@Intel.com
These error codes are not actually used in the driver but it is
extremely useful to have them available to understand error messages.
v2: Add a bunch more error codes and drop 'status' from names (review
feedback by Michal W).
v3: Drop 'SUCCESS' response as meaningless in current API (review
feedback by Michal W).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512215324.1457009-3-John.C.Harrison@Intel.com
An earlier patch moved a drm_print a few lines lower but accidentally
left a double blank line behind. So fix that.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512215324.1457009-2-John.C.Harrison@Intel.com