The MT8186 Squirtle Chromebook is built with one of two possible
touchscreens. Let the prober probe for them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250421101248.426929-9-wenst@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Various MT8186 Corsola Chromebooks (squirtle, steelix and voltorb
families) have second source trackpads that need to be probed.
The power supply for these are always on and their reset/enable
lines are not exposed.
Add them to the probing list.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250421101248.426929-8-wenst@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Using the MDIO pins with Open Drain causes spec violations of the
signals. Revert the changes.
This reverts commit 315d7f301e.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using the MDIO pins with Open Drain causes spec violations of the
signals. Revert the changes.
This reverts commit 9015397c2f.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the interrupts and wakeup-source to allow the external RTC to be
used as an alarm.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the interrupts and wakeup-source to allow the external RTC to be
used as an alarm.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the interrupts and wakeup-source to allow the external RTC to be
used as an alarm.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Ethernet PHY setup currently assumes that the bootloader will take the
PHY out of reset, but this behavior is not guaranteed across all
bootloaders. Add the reset GPIO to ensure the kernel can properly control
the PHY reset line.
Also configure the PHY IRQ GPIO to enable interrupt-driven link status
reporting, instead of relying on polling.
This ensures more reliable Ethernet initialization and improves PHY event
handling.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Ethernet PHY setup currently assumes that the bootloader will take the
PHY out of reset, but this behavior is not guaranteed across all
bootloaders. Add the reset GPIO to ensure the kernel can properly control
the PHY reset line.
Also configure the PHY IRQ GPIO to enable interrupt-driven link status
reporting, instead of relying on polling.
This ensures more reliable Ethernet initialization and improves PHY event
handling.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The HDMI bridge chip fails to generate an audio source due to the SAI5
master clock (MCLK) direction not being set to output. This prevents proper
clocking of the HDMI audio interface.
Add the `fsl,sai-mclk-direction-output` property to the SAI5 node to ensure
the MCLK is driven by the SoC, resolving the HDMI sound issue.
Fixes: 1d6880ceef ("arm64: dts: imx8mn-beacon: Add HDMI video with sound")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The HDMI bridge chip fails to generate an audio source due to the SAI5
master clock (MCLK) direction not being set to output. This prevents proper
clocking of the HDMI audio interface.
Add the `fsl,sai-mclk-direction-output` property to the SAI5 node to ensure
the MCLK is driven by the SoC, resolving the HDMI sound issue.
Fixes: 8ad7d14d99 ("arm64: dts: imx8mm-beacon: Add HDMI video with sound")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 25a5ccdce7 ("arm64: dts: freescale: Introduce imx8mp-beacon-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 36ca3c8ccb ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 593816fa2f ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa93xx module attached to MBa91xxCA board.
TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and
some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and
secure element.
TQMa93xxCA can be attached directly while TQMa93xxLA needs an adapter.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add MBa91xxCA starterkit base board for TQMa93xxCA/LA SOM for
parallel display evaluation.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Reported-by: Jared Holzman <jholzman@nvidia.com>
Tested-by: Jared Holzman <jholzman@nvidia.com>
Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the IMX (as in i.MX, the NXP SoCs) MAINTAINERS entry claims
everything that contains the name "imx", hanges to device tree
bindings for any Sony IMX image sensor are likely to be sent to the
maintainers listed therein. Add the missing exclude to fix that.
Fixes: da8b7f0fb0 ("MAINTAINERS: add all files matching "imx" and "mxs" to the IMX entry")
Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the PCA85073A RTC module connected via I2C0 on
S32G274A-RDB2 and S32G399A-RDB3 boards.
Note that the PCA85073A RTC module is not battery backed.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Test that the SO_INCOMING_NAPI_ID of a network file descriptor is
non-zero. This ensures that either the core networking stack or, in some
cases like netdevsim, the driver correctly sets the NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250424002746.16891-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, nsim_rcv was not marking the NAPI ID on the skb, leading to
applications seeing a napi ID of 0 when using SO_INCOMING_NAPI_ID.
To add to the userland confusion, netlink appears to correctly report
the NAPI IDs for netdevsim queues but the resulting file descriptor from
a call to accept() was reporting a NAPI ID of 0.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250424002746.16891-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For ATA PASS-THROUGH + fixed format sense data + NCQ autosense
the INFORMATION sense data field is being written twice:
- 1st write: (redundant)
scsi_set_sense_information() sets the INFORMATION field to ATA LBA.
This is incorrect for ATA PASS-THROUGH.
- 2nd write: (correct)
ata_scsi_set_passthru_sense_fields() sets the INFORMATION field
to ATA ERROR/STATUS/DEVICE/COUNT(7:0) as per SAT spec.
There is no user-visible issue because second write overwrites
the incorrect data from the first write.
This patch eliminates the reduntant write by moving the INFORMATION
sense data field population logic to ata_scsi_qc_complete().
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
There are some sparse warnings in wifi, and it seems that
it's actually possible to annotate a function pointer with
__releases(), making the sparse warnings go away. In a way
that also serves as documentation that rcu_read_unlock()
must be called in the attach method, so add that annotation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423150811.456205-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeremy Harris says:
====================
tcp: fastopen: observability
Whether TCP Fast Open was used for a connection is not reliably
observable by an accepting application when the SYN passed no data.
Fix this by noting during SYN receive processing that an acceptable Fast
Open option was used, and provide this to userland via getsockopt TCP_INFO.
====================
Link: https://patch.msgid.link/20250423124334.4916-1-jgh@exim.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp: fastopen: pass TFO child indication through getsockopt
Note that this uses up the last bit of a field in struct tcp_info
Signed-off-by: Jeremy Harris <jgh@exim.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250423124334.4916-3-jgh@exim.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp: fastopen: note that a child socket was created
This uses up the last bit in a field of tcp_sock.
Signed-off-by: Jeremy Harris <jgh@exim.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250423124334.4916-2-jgh@exim.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch says:
====================
mlx5 misc fixes 2025-04-23
This patchset includes misc fixes from the team for the mlx5 core
and Ethernet drivers.
====================
Link: https://patch.msgid.link/20250423083611.324567-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit assumes enabling roce always succeeds. But it is
not true. Add error handling for it.
Fixes: 80f09dfc23 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously the offload of the rule with header rewrite and mirror to
both internal and external destinations is skipped if the encap entry
is not valid. But it shouldn't because driver will try to offload it
again if neighbor is updated and encap entry is valid, to replace the
old FTE added for slow path. But the extra split attr doesn't exist at
that time as the process is skipped, driver then fails to offload it.
To fix this issue, remove the checking and continue the attr process
if encap entry is invalid.
Fixes: b11bde5624 ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize the source MAC address when creating the default GID entry.
Since this entry is used only for loopback traffic, it only needs to
be a unicast address. A zeroed-out MAC address is sufficient for this
purpose.
Without this fix, random bits would be assigned as the source address.
If these bits formed a multicast address, the firmware would return an
error, preventing the user from switching to switchdev mode:
Error: mlx5_core: Failed setting eswitch to offloads.
kernel answers: Invalid argument
Fixes: 80f09dfc23 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels
cannot be combined, but the match params interface does not have fields
for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses
tunnel_header_0.
Allow matching on both VNI and GBP by matching the VNI with a custom
tunnel header instead of the symbolic field name.
Matching solely on the VNI continues to use the symbolic field name.
Fixes: 74a778b4a6 ("net/mlx5: HWS, added definers handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On this board, USB2.0 is a host-only port, add vbus regulator node
and enable USB2.0 node.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On this board, USB2.0 is a host-only port, add vbus regulator node
and enable USB2.0 node.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add USB2.0 controller and phy nodes.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa95xxSA
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These paths should call rxgk_put(gk) but they don't. In the
rxgk_construct_response() function the "goto error;" will free the
"response" skb as well calling rxgk_put() so that's a bonus.
Fixes: 9d1d2b5934 ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/aAikCbsnnzYtVmIA@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds support for the Nitrogen8M Plus System on Module and the Nitrogen8M
Plus ENC Carrier Board.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ilya Leoshkevich says:
====================
I tried running the arena_spin_lock test on s390x and ran into the
following issues:
* Changing the header file does not lead to rebuilding the test.
* The checked for number of CPUs and the actually required number of
CPUs are different.
* Endianness issue in spinlock definition.
This series fixes all three.
====================
Link: https://patch.msgid.link/20250424165525.154403-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Copy the big-endian field declarations from qspinlock_types.h,
otherwise some properties won't hold on big-endian systems. For
example, assigning lock->val = 1 should result in lock->locked == 1,
which is not the case there.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_arena_spin_lock_size() explicitly requires having at least 2 CPUs,
but if the machine has less than 16, then pthread_setaffinity_np() call
in spin_lock_thread() fails.
Cap threads to the number of CPUs.
Alternative solutions are raising the number of required CPUs to 16, or
pinning multiple threads to the same CPU, but they are not that useful.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing bpf_arena_spin_lock.h does not lead to recompiling
arena_spin_lock.c. By convention, all BPF progs depend on all
header files in progs/, so move this header file there. There
are no other users besides arena_spin_lock.c.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>