Process the PIR at the natural kernel width, i.e. in 64-bit chunks on
64-bit kernels, so that the worst case of having a posted IRQ in each
chunk of the vIRR only requires 4 loads and xchgs from/to the PIR, not 8.
Deliberately use a "continue" to skip empty entries so that the code is a
carbon copy of handle_pending_pir(), in anticipation of deduplicating KVM
and posted MSI logic.
Suggested-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250401163447.846608-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track the PIR bitmap in posted interrupt descriptor structures as an array
of unsigned longs instead of using unionized arrays for KVM (u32s) versus
IRQ management (u64s). In practice, because the non-KVM usage is (sanely)
restricted to 64-bit kernels, all existing usage of the u64 variant is
already working with unsigned longs.
Using "unsigned long" for the array will allow reworking KVM's processing
of the bitmap to read/write in 64-bit chunks on 64-bit kernels, i.e. will
allow optimizing KVM by reducing the number of atomic accesses to PIR.
Opportunstically replace the open coded literals in the posted MSIs code
with the appropriate macro. Deliberately don't use ARRAY_SIZE() in the
for-loops, even though it would be cleaner from a certain perspective, in
anticipation of decoupling the processing from the array declaration.
No functional change intended.
Link: https://lore.kernel.org/r/20250401163447.846608-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Read each vIRR exactly once when shuffling IRQs from the PIR to the vAPIC
to ensure getting the highest priority IRQ from the chunk doesn't reload
from the vIRR. In practice, a reload is functionally benign as vcpu->mutex
is held and so IRQs can be consumed, i.e. new IRQs can appear, but existing
IRQs can't disappear.
Link: https://lore.kernel.org/r/20250401163447.846608-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track whether or not at least one IRQ was found in PIR during the initial
loop to load PIR chunks from memory. Doing so generates slightly better
code (arguably) for processing the for-loop of XCHGs, especially for the
case where there are no pending IRQs.
Note, while PIR can be modified between the initial load and the XCHG, it
can only _gain_ new IRQs, i.e. there is no danger of a false positive due
to the final version of pir_copy[] being empty.
Opportunistically convert the boolean to an "unsigned long" and compute
the effective boolean result via bitwise-OR. Some compilers, e.g.
clang-14, need the extra "hint" to elide conditional branches.
Opportunistically rename the variable in anticipation of moving the PIR
accesses to a common helper that can be shared by posted MSIs and KVM.
Old:
<+74>: test %rdx,%rdx
<+77>: je 0xffffffff812bbeb0 <handle_pending_pir+144>
<pir[0]>
<+88>: mov $0x1,%dl>
<+90>: test %rsi,%rsi
<+93>: je 0xffffffff812bbe8c <handle_pending_pir+108>
<pir[1]>
<+106>: mov $0x1,%dl
<+108>: test %rcx,%rcx
<+111>: je 0xffffffff812bbe9e <handle_pending_pir+126>
<pir[2]>
<+124>: mov $0x1,%dl
<+126>: test %rax,%rax
<+129>: je 0xffffffff812bbeb9 <handle_pending_pir+153>
<pir[3]>
<+142>: jmp 0xffffffff812bbec1 <handle_pending_pir+161>
<+144>: xor %edx,%edx
<+146>: test %rsi,%rsi
<+149>: jne 0xffffffff812bbe7f <handle_pending_pir+95>
<+151>: jmp 0xffffffff812bbe8c <handle_pending_pir+108>
<+153>: test %dl,%dl
<+155>: je 0xffffffff812bbf8e <handle_pending_pir+366>
New:
<+74>: mov %rax,%r8
<+77>: or %rcx,%r8
<+80>: or %rdx,%r8
<+83>: or %rsi,%r8
<+86>: setne %bl
<+89>: je 0xffffffff812bbf88 <handle_pending_pir+360>
<+95>: test %rsi,%rsi
<+98>: je 0xffffffff812bbe8d <handle_pending_pir+109>
<pir[0]>
<+109>: test %rdx,%rdx
<+112>: je 0xffffffff812bbe9d <handle_pending_pir+125>
<pir[1]>
<+125>: test %rcx,%rcx
<+128>: je 0xffffffff812bbead <handle_pending_pir+141>
<pir[2]>
<+141>: test %rax,%rax
<+144>: je 0xffffffff812bbebd <handle_pending_pir+157>
<pir[3]>
Link: https://lore.kernel.org/r/20250401163447.846608-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure the PIR is read exactly once at the start of handle_pending_pir(),
to guarantee that checking for an outstanding posted interrupt in a given
chuck doesn't reload the chunk from the "real" PIR. Functionally, a reload
is benign, but it would defeat the purpose of pre-loading into a copy.
Fixes: 1b03d82ba1 ("x86/irq: Install posted MSI notification handler")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250401163447.846608-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
insn_decoder_test found a problem with decoding APX CTEST instructions:
Found an x86 instruction decoder bug, please report this.
ffffffff810021df 62 54 94 05 85 ff ctestneq
objdump says 6 bytes, but insn_get_length() says 5
It happens because x86-opcode-map.txt doesn't specify arguments for the
instruction and the decoder doesn't expect to see ModRM byte.
Fixes: 690ca3a306 ("x86/insn: Add support for APX EVEX instructions to the opcode map")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v6.10+
Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
Add a module param to each KVM vendor module to allow disabling device
posted interrupts without having to sacrifice all of APICv/AVIC, and to
also effectively enumerate to userspace whether or not KVM may be
utilizing device posted IRQs. Disabling device posted interrupts is
very desirable for testing, and can even be desirable for production
environments, e.g. if the host kernel wants to interpose on device
interrupts.
Put the module param in kvm-{amd,intel}.ko instead of kvm.ko to match
the overall APICv/AVIC controls, and to avoid complications with said
controls. E.g. if the param is in kvm.ko, KVM needs to be snapshot the
original user-defined value to play nice with a vendor module being
reloaded with different enable_apicv settings.
Link: https://lore.kernel.org/r/20250401161804.842968-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When starting device assignment, i.e. potential IRQ bypass, don't blast
KVM_REQ_UNBLOCK if APICv is disabled/unsupported. There is no need to
wake vCPUs if they can never use VT-d posted IRQs (sending UNBLOCK guards
against races being vCPUs blocking and devices starting IRQ bypass).
Opportunistically use kvm_arch_has_irq_bypass() for all relevant checks in
the VMX Posted Interrupt code so that all checks in KVM x86 incorporate
the same information (once AMD/AVIC is given similar treatment).
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250401161804.842968-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rescan I/O APIC routes for a vCPU after handling an intercepted I/O APIC
EOI for an IRQ that is not targeting said vCPU, i.e. after handling what's
effectively a stale EOI VM-Exit. If a level-triggered IRQ is in-flight
when IRQ routing changes, e.g. because the guest changes routing from its
IRQ handler, then KVM intercepts EOIs on both the new and old target vCPUs,
so that the in-flight IRQ can be de-asserted when it's EOI'd.
However, only the EOI for the in-flight IRQ needs to be intercepted, as
IRQs on the same vector with the new routing are coincidental, i.e. occur
only if the guest is reusing the vector for multiple interrupt sources.
If the I/O APIC routes aren't rescanned, KVM will unnecessarily intercept
EOIs for the vector and negative impact the vCPU's interrupt performance.
Note, both commit db2bdcbbbd ("KVM: x86: fix edge EOI and IOAPIC reconfig
race") and commit 0fc5a36dd6 ("KVM: x86: ioapic: Fix level-triggered EOI
and IOAPIC reconfigure race") mentioned this issue, but it was considered
a "rare" occurrence thus was not addressed. However in real environments,
this issue can happen even in a well-behaved guest.
Cc: Kai Huang <kai.huang@intel.com>
Co-developed-by: xuyun <xuyun_xy.xy@linux.alibaba.com>
Signed-off-by: xuyun <xuyun_xy.xy@linux.alibaba.com>
Signed-off-by: weizijie <zijie.wei@linux.alibaba.com>
[sean: massage changelog and comments, use int/-1, reset at scan]
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250304013335.4155703-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the vCPU specific EOI interception logic for I/O APIC emulation
into a common helper for userspace and in-kernel emulation in anticipation
of optimizing the "pending EOI" case.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250304013335.4155703-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract and isolate the trigger mode check in kvm_scan_ioapic_routes() in
anticipation of moving destination matching logic to a common helper (for
userspace vs. in-kernel I/O APIC emulation).
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250304013335.4155703-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The latest AMD platform has introduced a new instruction called PREFETCHI.
This instruction loads a cache line from a specified memory address into
the indicated data or instruction cache level, based on locality reference
hints.
Feature bit definition:
CPUID_Fn80000021_EAX [bit 20] - Indicates support for IC prefetch.
This feature is analogous to Intel's PREFETCHITI (CPUID.(EAX=7,ECX=1):EDX),
though the CPUID bit definitions differ between AMD and Intel.
Advertise support to userspace, as no additional enabling is necessary
(PREFETCHI can't be intercepted as there's no instruction specific behavior
that needs to be virtualize).
The feature is documented in Processor Programming Reference (PPR)
for AMD Family 1Ah Model 02h, Revision C1 (Link below).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ee1c08fc400bb574a2b8f2c6a0bd9def10a29d35.1744130533.git.babu.moger@amd.com
[sean: rewrite shortlog to highlight the KVM functionality]
Signed-off-by: Sean Christopherson <seanjc@google.com>
WRMSR_XX_BASE_NS is bit 1 so put it there, add some new bits as
comments only.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250324160617.15379-1-bp@kernel.org
[sean: skip the FSRS/FSRC placeholders to avoid confusion]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise support for WRMSRNS (WRMSR non-serializing) to userspace if the
instruction is supported by the underlying CPU. From a virtualization
perspective, the only difference between WRMSRNS and WRMSR is that VM-Exits
due to WRMSRNS set EXIT_QUALIFICATION to '1'. WRMSRNS doesn't require a
new enabling control, shares the same basic exit reason, and behaves the
same as WRMSR with respect to MSR interception.
WRMSR and WRMSRNS use the same basic exit reason (see Appendix C). For
WRMSR, the exit qualification is 0, while for WRMSRNS it is 1.
Don't do anything different when emulating WRMSRNS vs. WRMSR, as KVM can't
do anything less, i.e. can't make emulation non-serializing. The
motivation for the guest to use WRMSRNS instead of WRMSR is to avoid
immediately serializing the CPU when the necessary serialization is
guaranteed by some other mechanism, i.e. WRMSRNS being fully serializing
isn't guest-visible, just less performant.
Suggested-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227010111.3222742-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the WRMSRNS instruction opcode macro so that it doesn't collide
with X86_FEATURE_WRMSRNS when using token pasting to generate references
to X86_FEATURE_WRMSRNS. KVM heavily uses token pasting to generate KVM's
set of support feature bits, and adding WRMSRNS support in KVM will run
will run afoul of the opcode macro.
arch/x86/kvm/cpuid.c:719:37: error: pasting "X86_FEATURE_" and "" "" does not
give a valid preprocessing token
719 | u32 __leaf = __feature_leaf(X86_FEATURE_##name); \
| ^~~~~~~~~~~~
KVM has worked around one such collision in the past by #undef'ing the
problematic macro in order to avoid blocking a KVM rework, but such games
are generally undesirable, e.g. requires bleeding macro details into KVM,
risks weird behavior if what KVM is #undef'ing changes, etc.
Reviewed-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227010111.3222742-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 2e7eab8142 ("KVM: VMX: Execute IBPB on emulated VM-exit when
guest has IBRS") added an IBPB in the emulated VM-exit path on Intel to
properly virtualize IBRS by providing separate predictor modes for L1
and L2.
AMD requires similar handling, except when IbrsSameMode is enumerated by
the host CPU (which is the case on most/all AMD CPUs). With
IbrsSameMode, hardware IBRS is sufficient and no extra handling is
needed from KVM.
Generalize the handling in nested_vmx_vmexit() by moving it into a
generic function, add the AMD handling, and use it in
nested_svm_vmexit() too. The main reason for using a generic function is
to have a single place to park the huge comment about virtualizing IBRS.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-4-yosry.ahmed@linux.dev
[sean: use kvm_nested_vmexit_handle_spec_ctrl() for the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
If IBRS provides same mode (kernel/user or host/guest) protection on the
host, then by definition it also provides same mode protection in the
guest. In fact, all different modes from the guest's perspective are the
same mode from the host's perspective anyway.
Propagate IbrsSameMode to the guests.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Per the APM [1]:
Some processors, identified by CPUID Fn8000_0008_EBX[IbrsSameMode]
(bit 19) = 1, provide additional speculation limits. For these
processors, when IBRS is set, indirect branch predictions are not
influenced by any prior indirect branches, regardless of mode (CPL
and guest/host) and regardless of whether the prior indirect branches
occurred before or after the setting of IBRS. This is referred to as
Same Mode IBRS.
Define this feature bit, which will be used by KVM to determine if an
IBPB is required on nested VM-exits in SVM.
[1] AMD64 Architecture Programmer's Manual Pub. 40332, Rev 4.08 - April
2024, Volume 2, 3.2.9 Speculation Control MSRs
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
The "kvm_run->kvm_valid_regs" and "kvm_run->kvm_dirty_regs" variables are
u64 type. We are only using the lowest 3 bits but we want to ensure that
the users are not passing invalid bits so that we can use the remaining
bits in the future.
However "sync_valid_fields" and kvm_sync_valid_fields() are u32 type so
the check only ensures that the lower 32 bits are clear. Fix this by
changing the types to u64.
Fixes: 74c1807f6c ("KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ec25aad1-113e-4c6e-8941-43d432251398@stanley.mountain
Signed-off-by: Sean Christopherson <seanjc@google.com>
Previously, commit ed129ec905 ("KVM: x86: forcibly leave nested mode
on vCPU reset") addressed an issue where a triple fault occurring in
nested mode could lead to use-after-free scenarios. However, the commit
did not handle the analogous situation for System Management Mode (SMM).
This omission results in triggering a WARN when KVM forces a vCPU INIT
after SHUTDOWN interception while the vCPU is in SMM. This situation was
reprodused using Syzkaller by:
1) Creating a KVM VM and vCPU
2) Sending a KVM_SMI ioctl to explicitly enter SMM
3) Executing invalid instructions causing consecutive exceptions and
eventually a triple fault
The issue manifests as follows:
WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112
kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Modules linked in:
CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted
6.1.130-syzkaller-00157-g164fe5dde9b6 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.12.0-1 04/01/2014
RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Call Trace:
<TASK>
shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136
svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395
svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457
vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline]
vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062
kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283
kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN()
in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper
emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to
do _something_ sane with the VMCB, since it's technically undefined, and
INIT is the least awful choice given KVM's ABI.
So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of
SMM to avoid any weirdness (and the WARN).
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: ed129ec905 ("KVM: x86: forcibly leave nested mode on vCPU reset")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://lore.kernel.org/r/20250414171207.155121-1-m.lobanov@rosa.ru
[sean: massage changelog, make it clear this isn't architectural behavior]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbb ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
Add DMA support for spicc driver.
DMA works if the transfer meets the following conditions:
1. 64 bits per word;
2. The transfer length must be multiples of the dma_burst_len,
and the dma_burst_len should be one of 8,7...2,
otherwise, it will be split into several SPI bursts.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250414-spi-dma-v2-1-84bbd92fa469@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB
entry associated with the default remote (assuming one was configured)
is deleted without holding the hash lock. This is wrong and will result
in a warning [1] being generated by the lockdep annotation that was
added by commit ebe6420674 ("vxlan: Create wrappers for FDB lookup").
Reproducer:
# ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
# bridge vni add vni 10010 remote 198.51.100.1 dev vx0
# bridge vni del vni 10010 dev vx0
Fix by acquiring the hash lock before the deletion and releasing it
afterwards. Blame the original commit that introduced the issue rather
than the one that exposed it.
[1]
WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
<TASK>
__vxlan_fdb_delete+0xbe/0x560
vxlan_vni_delete_group+0x2ba/0x940
vxlan_vni_del.isra.0+0x15f/0x580
vxlan_process_vni_filter+0x38b/0x7b0
vxlan_vnifilter_process+0x3bb/0x510
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250423145131.513029-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
-----BEGIN PGP SIGNATURE-----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=c/97
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes, notably:
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
* tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: restore missing initialization of async_handlers_list
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
wifi: iwlwifi: fix the check for the SCRATCH register upon resume
wifi: iwlwifi: don't warn if the NIC is gone in resume
wifi: iwlwifi: mld: fix BAID validity check
wifi: iwlwifi: back off on continuous errors
wifi: iwlwifi: mld: only create debugfs symlink if it does not exist
wifi: iwlwifi: mld: inform trans on init failure
wifi: iwlwifi: mld: properly handle async notification in op mode start
Revert "wifi: iwlwifi: make no_160 more generic"
Revert "wifi: iwlwifi: add support for BE213"
wifi: mac80211: restore monitor for outgoing frames
====================
Link: https://patch.msgid.link/20250424120535.56499-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for Cavium ThunderX
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite pile
of sand: Cavium ThunderX
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaAK8pxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFsJdAQDPLe/PQ05H5P/dIdZtjMb127OH
gLWOb2PsvpJ747pjQQD9EkFRqJmiUioxRtvLP8/63fzhQ1/OCwtEUsA3jfLtOgI=
=42YY
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #2
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite pile
of sand: Cavium ThunderX
When memory allocation profiling is disabled at runtime or due to an
error, shutdown_mem_profiling() is called: slab->obj_exts which
previously allocated remains.
It won't be cleared by unaccount_slab() because of
mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts
should always be cleaned up in unaccount_slab() to avoid following error:
[...]BUG: Bad page state in process...
..
[...]page dumped because: page still charged to cgroup
[andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]
Fixes: 21c690a349 ("mm: introduce slabobj_ext to support slab object extensions")
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20250421075232.2165527-1-quic_zhenhuah@quicinc.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
A previous commit added a 'sync' parameter to io_fallback_tw(), which if
true, means the caller wants to wait on the fallback thread handling it.
But the logic is somewhat messed up, ensure that ctxs are swapped and
flushed appropriately.
Cc: stable@vger.kernel.org
Fixes: dfbe5561ae ("io_uring: flush offloaded and delayed task_work on exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The GNU coreutils version of truncate, which is the original, accepts a
% prefix for the -s size argument which means the file in question
should be padded to a multiple of the given size. This is currently used
to pad the setup block of bzImage to a multiple of 4k before appending
the decompressor.
busybox reimplements truncate but does not support this idiom, and
therefore fails the build since commit
9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Since very little build code within the kernel depends on the 'truncate'
utility, work around this incompatibility by avoiding truncate altogether,
and relying on dd to perform the padding.
Fixes: 9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Reported-by: <phasta@kernel.org>
Tested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250424101917.1552527-2-ardb+git@google.com
While the building system doesn't create any Python JIT bytecode,
if one manually runs kernel-doc.py or get_abi.py, Python will,
by default, create a bytecode and store it under scripts/lib/*.
This is normal, and not controlled by the Kernel itself. So,
add *.pyc as an extension to be ignored.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <ae1c54ddacf6ded1f7154897b10798d4b3fdaf96.1745453655.git.mchehab+huawei@kernel.org>
As reported by Andy, kernel-doc.py is creating a __pycache__
directory at build time.
Disable creation of __pycache__ for the libraries used by
kernel-doc.py, when excecuted via the build system or via
scripts/find-unused-docs.sh.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/linux-doc/Z_zYXAJcTD-c3xTe@black.fi.intel.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <158b962ed7cd104f7bbfe69f499ec1cc378864db.1745453655.git.mchehab+huawei@kernel.org>
As kernel-doc script is used not only on Documentation, but
also on scripts and drivers/drm Makefiles, move it to the
main makefile, as otherwise sub-makefiles may not have it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <bb3ea3b49e76aee51dae7762db10c4d38cd67afe.1745453655.git.mchehab+huawei@kernel.org>
Despite its name, what's there is a set of Sphinx arguments that
are passed to sphinx/kerneldoc.py:
- kerneldoc_srctree: location of the source tree;
- kerneldoc_bin: external script to excecute kernel-doc
Drop it, and just place the values at the already-existing
ALLSPHINXOPTS variable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <88be0fc288598c30fbedb9cc230b2a7ed28225a2.1745453655.git.mchehab+huawei@kernel.org>
- Revert acomp multibuffer tests which were buggy.
- Fix off-by-one regression in new scomp code.
- Lower quality setting on atmel-sha204a as it may not be random.
-----BEGIN PGP SIGNATURE-----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=STVd
-----END PGP SIGNATURE-----
Merge tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Revert acomp multibuffer tests which were buggy
- Fix off-by-one regression in new scomp code
- Lower quality setting on atmel-sha204a as it may not be random
* tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: atmel-sha204a - Set hwrng quality to lowest possible
crypto: scomp - Fix off-by-one bug when calculating last page
Revert "crypto: testmgr - Add multibuffer acomp testing"
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.16.
Fixes: 28f79ac609 ("drm/xe/hwmon: expose fan speed")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4841
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-2-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea7 ("drm/xe/hwmon: expose package and vram temperature")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The Allwinner Power Reset Clock Management (RPCM) block contains a few
bits that control some power domains. The most prominent one is the one
for the Mali GPU. On the Allwinner H6 this domain is enabled at reset, so
we didn't care about it so far, but the H616 defaults to it being disabled.
Add a power domain driver for those bits. Some BSP code snippets and
some spare documentation describe three bits, slightly different between
the H6 and H616, so add three power domains for each SoC, connected to
their compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250416224839.9840-3-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The tool of Smatch static checker reported the following warning:
drivers/edac/i10nm_base.c:364 show_retry_rd_err_log()
warn: should bitwise negate be 'ullong'?
This warning was due to the bitwise NOT/AND operations between
'status_mask' (a u32 type) and 'log' (a u64 type), which resulted in
the high 32 bits of 'log' were cleared.
This was a false positive warning, as only the low 32 bits of 'log' was
written to the first RRL memory controller register (a u32 type).
To improve code sanity, fix this warning by changing 'status_mask' to
a u64 type, ensuring it matches the size of 'log' for bitwise operations.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aAih0KmEVq7ch6v2@stanley.mountain/
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250424081454.2952632-1-qiuxu.zhuo@intel.com
This commits breaks SNP guests:
234cf67fc3 ("x86/sev: Split off startup code from core code")
The SNP guest boots, but no longer has access to the VMPCK keys needed
to communicate with the ASP, which is used, for example, to obtain an
attestation report.
The secrets_pa value is defined as static in both startup.c and
core.c. It is set by a function in startup.c and so when used in
core.c its value will be 0.
Share it again and add the sev_ prefix to put it into the global
SEV symbols namespace.
[ mingo: Renamed to sev_secrets_pa ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Link: https://lore.kernel.org/r/cf878810-81ed-3017-52c6-ce6aa41b5f01@amd.com
Even though the kernel's coding-style document does not explicitly
state this, we generally put a newline after the semicolon of every
C language statement to enhance code readability.
Adjust the placement of newlines to adhere to this convention.
Reported-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://lore.kernel.org/r/DB66473733449DB0+20250423030632.17626-1-wangyuli@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rewrite the textual description for the WonderMedia PWM controller
as YAML schema, and switch the filename to follow the compatible
string.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418-via_pwm_binding-v2-1-17545f4d719e@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add a compatible string for the Display Controller PWM IP found in
the MediaTek Dimensity 1200 (MT6893) SoC, which is compatible with
the one found in MT8183.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120253.147977-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add Return and (where interesting) Context sections, fix some formatting
and drop documenting the internal function __pwm_apply().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250417181611.2693599-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>