In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns.
Fixes: 365ad353c2 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The recent reordering of code in sev_ioctl_do_pdh_export triggered
a false-positive may-be-uninitialized warning from gcc:
In file included from ../include/linux/sched/task.h:13,
from ../include/linux/sched/signal.h:9,
from ../include/linux/rcuwait.h:6,
from ../include/linux/percpu-rwsem.h:7,
from ../include/linux/fs.h:34,
from ../include/linux/compat.h:17,
from ../arch/x86/include/asm/ia32.h:7,
from ../arch/x86/include/asm/elf.h:10,
from ../include/linux/elf.h:6,
from ../include/linux/module.h:19,
from ../drivers/crypto/ccp/sev-dev.c:11:
In function ‘copy_to_user’,
inlined from ‘sev_ioctl_do_pdh_export’ at ../drivers/crypto/ccp/sev-dev.c:2036:7,
inlined from ‘sev_ioctl’ at ../drivers/crypto/ccp/sev-dev.c:2249:9:
../include/linux/uaccess.h:225:16: warning: ‘input_cert_chain_address’ may be used uninitialized [-Wmaybe-uninitialized]
225 | return _copy_to_user(to, from, n);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/crypto/ccp/sev-dev.c: In function ‘sev_ioctl’:
../drivers/crypto/ccp/sev-dev.c:1961:22: note: ‘input_cert_chain_address’ was declared here
1961 | void __user *input_cert_chain_address;
| ^~~~~~~~~~~~~~~~~~~~~~~~
Silence it by moving the initialisation of the variables in question
prior to the NULL check.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting up the fallback request by hand, use
ahash_request_set_callback() and ahash_request_set_crypt() API helpers
to properly setup the new request.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add IS_ENABLED(CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG) checks before the
fallback counter updates to make sure the code is not included when
debugfs statistics support is not enabled.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'struct sun8i_ce_alg_template' is always defined, even with
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG disabled, so the ifdef guards
are not needed.
Make sure the statistics have IS_ENABLED() checks instead.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to reduce code duplication, factor out to a separate function
the codepath that increments debugfs fallback stats.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove duplicated fallback checks in sun8i_ce_hash_digest(). The same
checks are already done previously in sun8i_ce_hash_need_fallback().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rework error handling in sun8i_ce_hash_run() to unmap the dma buffers in
case of failure. Currently, the dma unmap functions are not called if the
function errors out at various points.
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SNP initialization is forced during PSP driver probe purely because SNP
can't be initialized if VMs are running. But the only in-tree user of
SEV/SNP functionality is KVM, and KVM depends on PSP driver for the same.
Forcing SEV/SNP initialization because a hypervisor could be running
legacy non-confidential VMs make no sense.
This patch removes SEV/SNP initialization from the PSP driver probe
time and moves the requirement to initialize SEV/SNP functionality
to KVM if it wants to use SEV/SNP.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move platform initialization of SEV/SNP from CCP driver probe time to
KVM module load time so that KVM can do SEV/SNP platform initialization
explicitly if it actually wants to use SEV/SNP functionality.
Add support for KVM to explicitly call into the CCP driver at load time
to initialize SEV/SNP. If required, this behavior can be altered with KVM
module parameters to not do SEV/SNP platform initialization at module load
time. Additionally, a corresponding SEV/SNP platform shutdown is invoked
during KVM module unload time.
Continue to support SEV deferred initialization as the user may have the
file containing SEV persistent data for SEV INIT_EX available only later
after module load/init.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a extraneous space after a newline in a mtk_venc_debug message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add an enum rkvdec_image_fmt used to signal an image format, e.g.
4:2:0 8-bit, 4:2:0 10-bit or any.
Tag each supported CAPUTRE format with an image format and use this tag
to filter out unsupported CAPTURE formats.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a rkvdec_is_valid_fmt() helper that check if a fourcc is a supported
CAPTURE format, and a rkvdec_enum_decoded_fmt() helper that enumerates
valid formats.
This moves current code into helper functions in preparation for adding
CAPTURE format filtering and validation in next patch.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move rkvdec_reset_decoded_fmt() and the called rkvdec_reset_fmt() helper
functions in preparation for adding a new caller in an upcoming patch.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Extract call to v4l2_fill_pixfmt_mp() and ajusting of sizeimage into a
helper. Replace current code with a call to the new helper.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some SPS/PPS parameters are currently hardcoded in the driver even
though they exist in the stable uapi controls.
Use values from SPS/PPS controls instead of hardcoding them.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
[jonas@kwiboo.se: constraint_set_flags condition, commit message]
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use bytesperline and buffer height to calculate the strides configured.
This does not really change anything other than ensuring the
bytesperline that is signaled to userspace matches what is configured
in HW.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
10-bit buffers.
NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
NV12 and NV16, using 10-bit components with no padding between each
component. Instead, a group of 4 luminance/chrominance samples are
stored over 5 bytes in little endian order:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' and '20' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a
multiple of 8 for NV15 and 4 for NV20.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add helper functions to calculate plane bytesperline and sizeimage,
these new helpers consider bpp div, block width and height when
calculating plane bytesperline and sizeimage.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
By default the amphion decoder will pre-parse 3 frames before starting
to decode the first frame. Alternatively, a block of flush padding data
can be appended to the frame, which will ensure that the decoder can
start decoding immediately after parsing the flush padding data, thus
potentially reducing decoding latency.
This mode was previously only enabled, when the display delay was set to
0. Allow the user to manually toggle the use of that mode via a module
parameter called low_latency, which enables the mode without
changing the display order.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The amphion decoder firmware supports a low latency flush mode for the
HEVC format since v1.9.0. This feature, which is enabled when the
display delay is set to 0, can help to reduce the decoding latency by
appending some padding data to every frame.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Objtool uses an arbitrary rule for INSN_SYSCALL and INSN_SYSRET that
almost works by accident: if it's in a function, control flow continues
after the instruction, otherwise it terminates.
That behavior should instead be based on the semantics of the underlying
instruction. Change INSN_SYSCALL to always preserve control flow and
INSN_SYSRET to always terminate it.
The changed semantic for INSN_SYSCALL requires a tweak to the
!CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat(). In Xen,
SYSCALL is a hypercall which usually returns. But in this case it's a
hypercall to IRET which doesn't return. Add UD2 to tell objtool to
terminate control flow, and to prevent undefined behavior at runtime.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com> # for the Xen part
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19453dfe9a0431b7f016e9dc16d031cad3812a50.1744095216.git.jpoimboe@kernel.org
INSN_CONTEXT_SWITCH is ambiguous. It can represent both call semantics
(SYSCALL, SYSENTER) and return semantics (SYSRET, IRET, RETS, RETU).
Those differ significantly: calls preserve control flow whereas returns
terminate it.
Objtool uses an arbitrary rule for INSN_CONTEXT_SWITCH that almost works
by accident: if in a function, keep going; otherwise stop. It should
instead be based on the semantics of the underlying instruction.
In preparation for improving that, split INSN_CONTEXT_SWITCH into
INSN_SYCALL and INSN_SYSRET.
No functional change.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19a76c74d2c051d3bc9a775823cafc65ad267a7a.1744095216.git.jpoimboe@kernel.org
The !CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat() ends
with a SYSCALL instruction which is classified by objtool as
INSN_CONTEXT_SWITCH.
Unlike validate_branch(), validate_unret() doesn't consider
INSN_CONTEXT_SWITCH in a non-function to be a dead end, so it keeps
going past the end of xen_entry_SYSCALL_compat(), resulting in the
following warning:
vmlinux.o: warning: objtool: xen_reschedule_interrupt+0x2a: RET before UNTRAIN
Fix that by adding INSN_CONTEXT_SWITCH handling to validate_unret() to
match what validate_branch() is already doing.
Fixes: a09a6e2399 ("objtool: Add entry UNRET validation")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/f5eda46fd09f15b1f5cde3d9ae3b92b958342add.1744095216.git.jpoimboe@kernel.org
The res pointer passed to simpledrm_device_release_clocks() and
simpledrm_device_release_regulators() points to an instance of
struct simpledrm_device. No need to upcast from struct drm_device.
The upcast is harmless, as DRM device is the first field in struct
simpledrm_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250407134753.985925-2-tzimmermann@suse.de
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SM8650 have already been supported by qcom-cpufreq-hw driver, but
never been added to cpufreq-dt-platdev. This makes noise
[ 0.388525] cpufreq-dt cpufreq-dt: failed register driver: -17
[ 0.388537] cpufreq-dt cpufreq-dt: probe with driver cpufreq-dt failed with error -17
So adding it to the cpufreq-dt-platdev driver's blocklist to fix it.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A KASAN enabled kernel reports an out-of-bounds access when handling the
nvmem cell in the sun50i cpufreq driver:
==================================================================
BUG: KASAN: slab-out-of-bounds in sun50i_cpufreq_nvmem_probe+0x180/0x3d4
Read of size 4 at addr ffff000006bf31e0 by task kworker/u16:1/38
This is because the DT specifies the nvmem cell as covering only two
bytes, but we use a u32 pointer to read the value. DTs for other SoCs
indeed specify 4 bytes, so we cannot just shorten the variable to a u16.
Fortunately nvmem_cell_read() allows to return the length of the nvmem
cell, in bytes, so we can use that information to only access the valid
portion of the data.
To cover multiple cell sizes, use memcpy() to copy the information into a
zeroed u32 buffer, then also make sure we always read the data in little
endian fashion, as this is how the data is stored in the SID efuses.
Fixes: 6cc4bcceff ("cpufreq: sun50i: Refactor speed bin decoding")
Reported-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The function returns bool so we should return false, not NULL. No
functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When scanning for new namespaces we might have missed an ANA AEN.
The NVMe base spec (NVMe Base Specification v2.1, Figure 151 'Asynchonous
Event Information - Notice': Asymmetric Namespace Access Change) states:
A controller shall not send this even if an Attached Namespace
Attribute Changed asynchronous event [...] is sent for the same event.
so we need to re-read the ANA log page after we rescanned the namespace
list to update the ANA states of the new namespaces.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does
not check for this case, which can result in a NULL pointer dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: 2dc6c6f15d ("[ARM] pata_pxa: DMA-capable PATA driver")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
We have the driver support code, now we just need to expose the device
node which can export the SDHCI and SDMMC properties for the 2 MMC
controllers in the npcm7xx. Tested on real hardware to verify that the
MMC controller is functional with filesystem access.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://patch.msgid.link/20250404191144.4111788-1-william@wkennington.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The EHCI peripheral already exists in the devicetree, but the hardware
also supports a discrete OHCI unit on the same USB PHY. Generic OHCI
works fine for this device already and has been tested on real hardware.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://patch.msgid.link/20250401233409.3215091-1-william@wkennington.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The driver support was already added but we are missing the nodes in our
common devicetree.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://patch.msgid.link/20250401235630.3220150-1-william@wkennington.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
We have the driver support code, now we just need to expose the device
node which can export the EDAC properties for the system memory
controller. Tested on real hardware to verify that error counters show
up.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://patch.msgid.link/20250401231001.3202669-1-william@wkennington.com
[arj: Add another colon to patch subject]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:
nuvoton-npcm750-runbmc-olympus.dtb: G1A_P0_0: $nodename:0: 'G1A_P0_0' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250116090047.87499-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
For i2s and DMIC copiers constraint stream capabilities based on
available NHLT configuration. This allows topology to provide generic
configuration that handles more hardware, while filtering unavailable
ones at runtime.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20250407130851.1726800-1-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "nxp,imx94-sysctr-timer" for the i.MX94 chip, which
is backward compatible with i.MX95. Set it to fall back to
"nxp,imx95-sysctr-timer".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250407151340.2779124-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string "fsl,imx94-irqsteer" for the i.MX94 chip, which is
backward compatible with "fsl,imx-irqsteer".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250407151552.2779343-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This controller support scalable data lanes from 1 to 4. Add the
'data-lanes' property to configure the number of MIPI display panel lanes
selected for boards.
Change $ref of port@1 from 'port' to 'port-base' and add 'endpoint'
property referencing video-interfaces.yaml. Allow 'data-lanes' values
1, 2, 3, and 4 for port@1.
Fix below CHECK_DTB warnings:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb:
dsi@30a00000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250407150442.2778299-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cleanup fprobe address hash table on module unloading because the
target symbols will be disappeared when unloading module and not
sure the same symbol is mapped on the same address.
Note that this is at least disables the fprobes if a part of target
symbols on the unloaded modules. Unlike kprobes, fprobe does not
re-enable the probe point by itself. To do that, the caller should
take care register/unregister fprobe when loading/unloading modules.
This simplifies the fprobe state managememt related to the module
loading/unloading.
Link: https://lore.kernel.org/all/174343534473.843280.13988101014957210732.stgit@devnote2/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
release_firmware() checks for NULL pointers internally.
Remove unneeded NULL check for fmw here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407063403.2772040-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>