of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor.
- Use gpiod_set_value to configure output value.
With legacy of_gpio API, the driver set GPIO value 1 to power up
AK5386, and set value 0 to power down.
Per datasheet for PDN(reset_gpio in the driver):
Power Down & Reset Mode Pin
“H”: Power up, “L”: Power down & Reset
The AK5386 must be reset once upon power-up.
There is no in-tree DTS using this codec, and the bindings does not
specify polarity. Per driver and datasheet, the GPIO polarity should be
active-high which is to power up the codec. So using GPIOD_OUT_LOW
when get the GPIO descriptor matches GPIOF_OUT_INIT_LOW when using
of_gpio API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250406010532.1212894-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add WARN_ON_ONCE() statements whenever new exclusive CPUs are being
added to a partition root to catch inconsistency in the way exclusive
CPUs are being handled in the cpuset code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move the partition disablement comment from cpuset_css_offline()
to cpuset_css_killed() and reword it to remove the remnant of
sched.partition.
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The current cpuset code uses both cpu_active_mask and cpu_online_mask
and it can be confusing which one should be used if we need to update
the code.
The top_cpuset is always synchronized to cpu_active_mask and we should
avoid using cpu_online_mask as much as possible. An active CPU is always
an online CPU, but not vice versa. cpu_active_mask and cpu_online_mask
can differ during hotplug operations.
A CPU is marked active at the last stage of CPU bringup (CPUHP_AP_ACTIVE).
It is also the stage where cpuset hotplug code will be called to update
the sched domains so that the scheduler can move a normal task to a
newly active CPU or remove tasks away from a newly inactivated CPU. The
online bit is set much earlier in the CPU bringup process and cleared
much later in CPU teardown.
If cpu_online_mask is used while a hotunplug operation is happening in
parallel, we may leave an offline CPU in cpu_allowed or have a higher
chance of leaving an offline CPU in some other masks. Avoid this
problem by always using cpu_active_mask in the cpuset code and leave
a comment as to why the use of cpu_online_mask is discouraged.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The pKVM FF-A proxy rejects FF-A requests other than FFA_VERSION until
version negotiation is complete, which is signalled by setting the
global 'has_version_negotiated' variable.
To avoid excessive locking, this variable is checked directly from
kvm_host_ffa_handler() in response to an FF-A call, but this can race
against another CPU performing the negotiation and potentially lead to
reading a torn value (incredibly unlikely for a 'bool') or problematic
re-ordering of the accesses to 'has_version_negotiated' and
'hyp_ffa_version' whereby a stale version number could be read by
__do_ffa_mem_xfer().
Use acquire/release primitives when writing 'has_version_negotiated'
with the version lock held and when reading without the lock held.
Cc: Sebastian Ene <sebastianene@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: c9c012625e ("KVM: arm64: Trap FFA_VERSION host call in pKVM")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250407152755.1041-1-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement VCN engine reset by sending MSG_ResetVCN
on smu 13.0.6.
v2: fix format for code and message
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Optimize custom brightness curve
* Correct SSC enable detection for DCN351
* Turn off eDP lcdvdd and backlight if not required
* Use DMUB Fused IO interface for HDCP
* Extend eDP-on-DP1 quirk list
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Fix the confusing entry/exit message name for IPS2
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A+N configuration, eDP on A-APU is off, extended display active.
Resume from s4, eDP's backlight is still on.
[how]
Turn off inactive eDP backlight and lcdvdd.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix was previously in 25.20 but was reverted out as it was accompanied
by other changes that caused regression.
[why&how]
Disabling dtb as the dto src during dpms off relies on in the same
instance being able to also alter the dto src bit to dpref (or not dtb
in general), but this was recently changed to only take place in
dcn31_program_pix_clk, as that is where we want to perform any dto src
changes because tg is off at that point, it is unsafe to do that
elsewhere. What this means is now instead of disabling dtb as dto src
and modifying source bit, we are left with the configuration for a given
tg that specifies dtb as dto src and dtb dto en simultaneously is unset.
dcn31_program_pix_clk can rectify this but its possible for us to
perform some tg dependant operation that would simply hang because when
we go to enable say crtc then, the clk we specify as dto src is "off" en
bit is cleared, source bit was never changed, and program_pix_clk hasnt
been called yet (as apart of dpms on)
We cant disable it as dto src during dpms off if we want the luxury of
performing tg dependant operation during dpms off and before dpms on.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
It is possible for an update to acquire otg lock and begin programming
while the previous update has not completed and its values have not
latched. The correct way to go about this is to wait until the vupdate
pulses so we can be sure that previous updates have latched and we can
continue with the current update pipe programming, otherwise during
consecutive full updates we will have corruption flash on the screen.
The corruption flash occurs specifically on configs that require odm
combine, and its local to a specific pipe (will not flash across whole
screen). This ticket is across the otg slave, but it may also appear
across master.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A variety of the 3DLUT handling functions check
`debug.enable_mem_low_power.bits.cm` both in the caller and function.
This is unnecessary overhead.
[How]
For each of them reduce to just checking just in caller or function.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR support could vary from the panels connected to one GPU versus
another.
[How]
Move PSR support message into amdgpu_dm which has the scope of the
GPU and use that information.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dev_*() messages don't show that they are from a driver in drm
subsystem.
[How]
Change all dev_*() messages to drm_*() messages.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDCP locality check has strict timing requirements, currently broken
due to reliance on msleep which does not guarantee accuracy.
The PR moves the write-poll-read sequence into DMUB using new generic
Fused IO interface, where the timing accuracy is greatly improved.
New flow is enabled using DCN resource capability bit (none for now),
or using a debug flag.
[How]
* Extended mod_hdcp_config with new function for requesting DMUB
to execute a sequence of fused I2C/AUX commands and synchronously
wait until an outbox reply arrives or a timeout expires.
* If the timeout expires, send an abort to DMUB.
* Update HDCP to use the DMUB for locality check if supported.
* Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK.
* Make the first enable new flow regardless of resource capabilities.
* Make the second enable fallback to old SW flow.
* Clean up makefile source file listings for easier updates.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to very small clock register delta between DCN35 and DCN351, clock
spread is being checked on the wrong register for DCN351, causing the
display driver to believe that DPREFCLK downspread to be disabled when
in some stacks it is enabled. This causes the clock values for audio to
be incorrect.
[How]
Both DCN351 and DCN35 use the same clk_mgr, so we modify the DCN35
function that checks for SSC enable to read CLK6 instead of CLK5 when
using DCN351. This allows us to read for DPREFCLK downspread correctly
so the clock can properly compensate when setting values.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Kevin Gao <kevin.gao3@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When BIOS includes a lot of custom brightness data points, walking
the entire list can be time consuming. This is most noticed when
dragging a power slider. The "higher" values are "slower" to drag
around.
[How]
Move custom brightness calculation loop into a static function. Before
starting the loop check the "half way" data point to see how it compares
to the input. If greater than the half way data point use that as the
starting point instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPER read will loop infinitely if an error is encountered and
the more bit is set. Add error checks to break upon failure.
v2: added function pointer checks
Suggested-by: Tony Yi <Tony.Yi@amd.com>
Signed-off-by: Victor Skvortsov <Victor.Skvortsov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If device wedges on e.g. GuC upload, the submission is not yet enabled
and the state is not even initialized. Protect the wedge call so it does
nothing in this case. It fixes the following splat:
[] xe 0000:bf:00.0: [drm] device wedged, needs recovery
[] ------------[ cut here ]------------
[] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60
...
[] RIP: 0010:__mutex_lock+0x8a1/0xe60
[] mutex_lock_nested+0x1b/0x30
[] xe_guc_submit_wedge+0x80/0x2b0 [xe]
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250402-warn-after-wedge-v1-1-93e971511fa5@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Merge series from From git@z Thu Jan 1 00:00:00 1970
Peng Fan <peng.fan@nxp.com>:
Update the driver to fetch buck_gpio and buck_ds as GPIO descriptors.
Then drop the usage of 'of_gpio.h' which should be deprecated.
Based on commit 84618d5e31 ("regulator: max8997:
Convert to GPIO descriptors") as a reference to make the changes.
With the quirk fix for s5m8767 in of_gpio_try_fixup_polarity,
the polarity will be active-high, even if exynos5250 spring DTS
wrongly use active-low polarity. So using GPIO descriptors,
it should work as before.
Commit b4b05e53b5 ("drm/xe/guc_pc: Retry and wait longer for GuC PC
start"), leads to the following Smatch static checker warning:
drivers/gpu/drm/xe/xe_guc_pc.c:1073 xe_guc_pc_start()
warn: missing error code here? '_dev_err()' failed. 'ret' = '0'
Fixes: c605acb53f ("drm/xe/guc_pc: Retry and wait longer for GuC PC start")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-xe/1454a5f1-ee18-4df1-a6b2-a4a3dddcd1cb@stanley.mountain/
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250328181752.26677-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 3f2bdccbcc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Historically, the Vertex Fetcher unit has not been an L3 client. That
meant that, when a buffer containing vertex data was written to, it was
necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any
VF L2 cachelines associated with that buffer, so the new value would be
properly read from memory.
Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER
have included an "L3 Bypass Enable" bit which userspace drivers can set
to request that the vertex fetcher unit snoop L3. However, unlike most
true L3 clients, the "VF Cache Invalidate" bit continues to only
invalidate the VF L2 cache - and not any associated L3 lines.
To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation
Bit", which according to the docs, "controls the invalidation of the
Geometry streams cached in L3 cache at the top of the pipe." In other
words, the vertex and index buffer data that gets cached in L3 when
"L3 Bypass Disable" is set.
Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and
whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only
Cache Invalidate so that both L2 and L3 vertex data is invalidated.
xe is issuing VF cache invalidates too (which handles cases like CPU
writes to a buffer between GPU batches). Because userspace may enable
L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well.
Fixes significant flickering in Firefox on Meteorlake, which was writing
to vertex buffers via the CPU between batches; the missing L3 Read Only
invalidates were causing the vertex fetcher to read stale data from L3.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460
Fixes: 6ef3bb6055 ("drm/xe: enable lite restore")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250330165923.56410-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 61672806b5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Building the xe driver for i386 results in a link time warning:
x86_64-linux-ld: drivers/gpu/drm/xe/xe_migrate.o: in function `xe_migrate_vram':
xe_migrate.c:(.text+0x1e15): undefined reference to `__udivdi3'
Avoid this by using DIV_U64_ROUND_UP() instead of DIV_ROUND_UP(). The driver
is unlikely to be used on 32=bit hardware, so the extra cost here is not
too important.
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250324210612.2927194-1-arnd@kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c909225750)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Sysfs_ops needs to be defined on all directories which
can have attr files with set/get method. Add sysfs_ops
to even those directories which is currently empty but
would have attr files with set/get method in future.
Leave .default with default sysfs_ops as it will never
have setter method.
V2(Himal/Rodrigo):
- use single sysfs_ops for all dir and attr with set/get
- add default ops as ./default does not need runtime pm at all
Fixes: 3f0e14651a ("drm/xe: Runtime PM wake on every sysfs call")
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327122647.886637-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 40780b9760)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The intent of the error path in xe_migrate_clear is to wait on locally
generated fence and then return. The code is waiting on m->fence which
could be the local fence but this is only stable under the job mutex
leading to a possible UAF. Fix code to wait on local fence.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250311182915.3606291-1-matthew.brost@intel.com
(cherry picked from commit 762b7e9536)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Extend Wa_14022293748, Wa_22019794406 to Xe3_LPG
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250325224310.1455499-1-julia.filipchuk@intel.com
(cherry picked from commit 32af900f2c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The RCU_MODE_FIXED_SLICE_CCS_MODE setting is not getting invoked
in the gt reset path after the ccs_mode setting by the user.
Add it to engine register update list (in hw_engine_setup_default_state())
which ensures it gets set in the gt reset and engine reset paths.
v2: Add register update to engine list to ensure it gets updated
after engine reset also.
Fixes: 0d97ecce16 ("drm/xe: Enable Fixed CCS mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250327185604.18230-1-niranjana.vishwanathapura@intel.com
(cherry picked from commit 12468e519f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If drm_gpusvm_migrate_to_devmem() succeeds, if a cpu access happens to the
range the bo may be freed before xe_bo_unlock(), causing a UAF.
Since the reference is transferred, use xe_svm_devmem_release() to
release the reference on drm_gpusvm_migrate_to_devmem() failure,
and hold a local reference to protect the UAF.
Fixes: 2f118c9491 ("drm/xe: Add SVM VRAM migration")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250326080551.40201-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit c9db07cab7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
One additional BMG PCI ID has been added to the spec; make sure our
driver recognizes devices with this ID properly.
Bspec: 68090
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250325224709.4073080-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit cca9734ebe)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
ath12k-check is flagging:
drivers/net/wireless/ath/ath12k/dp.c:1656: 'upto' may be misspelled - perhaps 'up to'?
Replace "upto" with "up to" and split the comment line so that it
doesn't exceed 80 columns.
Link: https://patch.msgid.link/20250407-upto-v1-1-23ca65f2ccdf@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add missing colon in kernel-doc for DC_DEBUG_MASK enum.
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below comment warning
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:541:
warning: Function parameter or struct member 'adev'
not described in 'amdgpu_sdma_register_on_reset_callbacks'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the right register offsets for getting link status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "timing" cannot be NULL because it
points to the object "struct dc_crtc_timing".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove workaround code for the early engineering
samples GC v9.4.3 SOCs with revID 0
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Apurv Mishra <Apurv.Mishra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed unused function mpc401_get_3dlut_fast_load_status.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we are using the proper defines, cleanup useless old "substituted" defines.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines by the ones added earlier to GFX6, SMU6 and DCE6
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines for the ones under smu_6_0_d.h and smu_6_0_sh_mask.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling VCN FW workaround for drm key injection through shared
memory for vcn 4_0_5
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs on some IP versions are unable to access this register directly.
This register must be programmed before PSP ring is setup,
so use PSP VF mailbox directly. PSP will broadcast the register
value to all VF assigned instances.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the GFX12 kgq pipe reset, and temporarily disable
the GFX12 pipe reset until the CPFW fully support it.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>