Commit graph

1,385,869 commits

Author SHA1 Message Date
Mark Brown
cc80b44b69
ASoC: q6apm: fix under runs and fragment sizes
Merge series from srinivas.kandagatla@linaro.org:

On Qualcomm Audioreach setup, some of the audio artifacts are seen in
both recording and playback. These patches fix issues by
1. Adjusting the fragment size that dsp can service.
2. schedule available playback buffers in time for dsp to not hit under runs
3. remove some of the manual calculations done to get hardware pointer.

With these patches, am able to see significant Audio quality improvements.
I have few more patches to optimize the dsp drivers, but for now am
keeping this series simple to address the underruns and overruns issues
noticed in pipewire setup.

Any testing would be appreciated.

Please note that on pipewire min-latency has to be set to 512 which
reflects the DSP latency requirements of 10ms. You might see audio
artifacts like glitches if you try to play audio below 256 latency.
2025-03-31 18:49:28 +01:00
Linus Torvalds
609706855d Documentation fix for runtime verifier
The runtime verifier documents that were created were not referenced
 in the indices, which caused warning when building the documentation
 tree. Those documents are now added to the rv indices.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+cRdhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qhc3AQCm6C+HJZl28AT7jlFLBwUzgzHJdkQp
 hAVp0o6heMjRCwD/QAKUDKaTOeqmmvmP/u2CF/e/IFypBDauwsA3bhiKKA8=
 =2HEf
 -----END PGP SIGNATURE-----

Merge tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing documentation fix from Steven Rostedt:
 "Documentation fix for runtime verifier

  The runtime verifier documents that were created were not referenced
  in the indices, which caused warning when building the documentation
  tree. Those documents are now added to the rv indices"

* tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation/rv: Add sched pages to the indices
2025-03-31 09:56:08 -07:00
Gustavo Sousa
bac0160665 drm/xe: Make PPHWSP size explicit in xe_gt_lrc_size()
The context of each engine starts with a 4k memory space for the
"Per-process HW status page" (PPHWSP). In xe_gt_lrc_size(), we have been
implicitly accounting for that page in the switch statement on the
engine class.

Since the PPHWSP is common to all engines, let's extract that into it's
own assignment. That makes the context structure more explicit in the
code and aligns better with the descriptions in Bspec.

Another advantage of keeping it separate is that now the sizes used in
the switch statement match the sizes we calculate engine-specific
context images, which have their own Bspec pages.

Bspec: 67296, 60159, 45554
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250328-explicit-pphwsp-size-in-xe_gt_lrc_size-v1-1-ceb9ce7c8bc1@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-03-31 09:46:13 -07:00
Kenneth Graunke
61672806b5
drm/xe: Invalidate L3 read-only cachelines for geometry streams too
Historically, the Vertex Fetcher unit has not been an L3 client.  That
meant that, when a buffer containing vertex data was written to, it was
necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any
VF L2 cachelines associated with that buffer, so the new value would be
properly read from memory.

Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER
have included an "L3 Bypass Enable" bit which userspace drivers can set
to request that the vertex fetcher unit snoop L3.  However, unlike most
true L3 clients, the "VF Cache Invalidate" bit continues to only
invalidate the VF L2 cache - and not any associated L3 lines.

To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation
Bit", which according to the docs, "controls the invalidation of the
Geometry streams cached in L3 cache at the top of the pipe."  In other
words, the vertex and index buffer data that gets cached in L3 when
"L3 Bypass Disable" is set.

Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and
whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only
Cache Invalidate so that both L2 and L3 vertex data is invalidated.

xe is issuing VF cache invalidates too (which handles cases like CPU
writes to a buffer between GPU batches).  Because userspace may enable
L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well.

Fixes significant flickering in Firefox on Meteorlake, which was writing
to vertex buffers via the CPU between batches; the missing L3 Read Only
invalidates were causing the vertex fetcher to read stale data from L3.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460
Fixes: 6ef3bb6055 ("drm/xe: enable lite restore")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250330165923.56410-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-31 12:18:41 -04:00
Linus Torvalds
802f0d58d5 perf tools changes for v6.15
perf record
 -----------
 * Introduce latency profiling using scheduler information.  The latency
   profiling is to show impacts on wall-time rather than cpu-time.  By
   tracking context switches, it can weight samples and find which part
   of the code contributed more to the execution latency.
 
   The value (period) of the sample is weighted by dividing it by the
   number of parallel execution at the moment.  The parallelism is
   tracked in perf report with sched-switch records.  This will reduce
   the portion that are run in parallel and in turn increase the portion
   of serial executions.
 
   For now, it's limited to profile processes, IOW system-wide profiling
   is not supported.  You can add --latency option to enable this.
 
     $ perf record --latency -- make -C tools/perf
 
   I've run the above command for perf build which adds -j option to
   make with the number of CPUs in the system internally.  Normally
   it'd show something like below:
 
     $ perf report -F overhead,comm
     ...
     #
     # Overhead  Command
     # ........  ...............
     #
         78.97%  cc1
          6.54%  python3
          4.21%  shellcheck
          3.28%  ld
          1.80%  as
          1.37%  cc1plus
          0.80%  sh
          0.62%  clang
          0.56%  gcc
          0.44%  perl
          0.39%  make
 	 ...
 
   The cc1 takes around 80% of the overhead as it's the actual compiler.
   However it runs in parallel so its contribution to latency may be less
   than that.  Now, perf report will show both overhead and latency (if
   --latency was given at record time) like below:
 
     $ perf report -s comm
     ...
     #
     # Overhead   Latency  Command
     # ........  ........  ...............
     #
         78.97%    48.66%  cc1
          6.54%    25.68%  python3
          4.21%     0.39%  shellcheck
          3.28%    13.70%  ld
          1.80%     2.56%  as
          1.37%     3.08%  cc1plus
          0.80%     0.98%  sh
          0.62%     0.61%  clang
          0.56%     0.33%  gcc
          0.44%     1.71%  perl
          0.39%     0.83%  make
 	 ...
 
   You can see latency of cc1 goes down to around 50% and python3 and ld
   contribute a lot more than their overhead.  You can use --latency
   option in perf report to get the same result but ordered by latency.
 
     $ perf report --latency -s comm
 
 perf report
 -----------
 * As a side effect of the latency profiling work, it adds a new output
   field 'latency' and a sort key 'parallelism'.  The below is a result
   from my system with 64 CPUs.  The build was well-parallelized but
   contained some serial portions.
 
     $ perf report -s parallelism
     ...
     #
     # Overhead   Latency  Parallelism
     # ........  ........  ...........
     #
         16.95%     1.54%           62
         13.38%     1.24%           61
         12.50%    70.47%            1
         11.81%     1.06%           63
          7.59%     0.71%           60
          4.33%    12.20%            2
          3.41%     0.33%           59
          2.05%     0.18%           64
          1.75%     1.09%            9
          1.64%     1.85%            5
          ...
 
 * Support Feodra mini-debuginfo which is a LZMA compressed symbol table
   inside ".gnu_debugdata" ELF section.
 
 perf annotate
 -------------
 * Add --code-with-type option to enable data-type profiling with the
   usual annotate output.  Instead of focusing on data structure, it
   shows code annotation together with data type it accesses in case the
   instruction refers to a memory location (and it was able to resolve
   the target data type).  Currently it only works with --stdio.
 
     $ perf annotate --stdio --code-with-type
     ...
      Percent |      Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
     ----------------------------------------------------------------------------------------------------------------------
              : 0                0xffffffff81050610 <__fdget>:
         0.00 :   ffffffff81050610:        callq   0xffffffff81c01b80 <__fentry__>           # data-type: (stack operation)
         0.00 :   ffffffff81050615:        pushq   %rbp              # data-type: (stack operation)
         0.00 :   ffffffff81050616:        movq    %rsp, %rbp
         0.00 :   ffffffff81050619:        pushq   %r15              # data-type: (stack operation)
         0.00 :   ffffffff8105061b:        pushq   %r14              # data-type: (stack operation)
         0.00 :   ffffffff8105061d:        pushq   %rbx              # data-type: (stack operation)
         0.00 :   ffffffff8105061e:        subq    $0x10, %rsp
         0.00 :   ffffffff81050622:        movl    %edi, %ebx
         0.00 :   ffffffff81050624:        movq    %gs:0x7efc4814(%rip), %rax  # 0x14e40 <current_task>              # data-type: struct task_struct* +0
         0.00 :   ffffffff8105062c:        movq    0x8d0(%rax), %r14         # data-type: struct task_struct +0x8d0 (files)
         0.00 :   ffffffff81050633:        movl    (%r14), %eax              # data-type: struct files_struct +0 (count.counter)
         0.00 :   ffffffff81050636:        cmpl    $0x1, %eax
         0.00 :   ffffffff81050639:        je      0xffffffff810506a9 <__fdget+0x99>
         0.00 :   ffffffff8105063b:        movq    0x20(%r14), %rcx          # data-type: struct files_struct +0x20 (fdt)
         0.00 :   ffffffff8105063f:        movl    (%rcx), %eax              # data-type: struct fdtable +0 (max_fds)
         0.00 :   ffffffff81050641:        cmpl    %ebx, %eax
         0.00 :   ffffffff81050643:        jbe     0xffffffff810506ef <__fdget+0xdf>
         0.00 :   ffffffff81050649:        movl    %ebx, %r15d
         5.56 :   ffffffff8105064c:        movq    0x8(%rcx), %rdx           # data-type: struct fdtable +0x8 (fd)
 	...
 
   The "# data-type:" part was added with this change.  The first few
   entries are not very interesting.  But later you can it accesses
   a couple of fields in the task_struct, files_struct and fdtable.
 
 perf trace
 ----------
 * Support syscall tracing for different ABI.  For example it can trace
   system calls for 32-bit applications on 64-bit kernel transparently.
 
 * Add --summary-mode=total option to show global syscall summary.  The
   default is 'thread' to show per-thread syscall summary.
 
 Python support
 --------------
 * Add more interfaces to 'perf' module to parse events, and config,
   enable or disable the event list properly so that it can implement
   basic functionalities purely in Python.  There is an example code
   for these new interfaces in python/tracepoint.py.
 
 * Add mypy and pylint support to enable build time checking.  Fix
   some code based on the findings from these tools.
 
 Internals
 ---------
 * Introduce io_dir__readdir() API to make directory traveral (usually
   for proc or sysfs) efficient with less memory footprint.
 
 JSON vendor events
 ------------------
 * Add events and metrics for ARM Neoverse N3 and V3
 * Update events and metrics on various Intel CPUs
 * Add/update events for a number of SiFive processors
 
 Signed-off-by: Namhyung Kim <namhyung@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZ+Y/YQAKCRCMstVUGiXM
 g64CAP9sdUgKCe66JilZRAEy9d3Cp835v7KjHSlCXLXkRSoy6wD+KH96Y0OqVtGw
 GYON4s9ZoXAoH+J0lKIFSffVL9MhYgY=
 =7L7B
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
 "perf record:

   - Introduce latency profiling using scheduler information.

     The latency profiling is to show impacts on wall-time rather than
     cpu-time. By tracking context switches, it can weight samples and
     find which part of the code contributed more to the execution
     latency.

     The value (period) of the sample is weighted by dividing it by the
     number of parallel execution at the moment. The parallelism is
     tracked in perf report with sched-switch records. This will reduce
     the portion that are run in parallel and in turn increase the
     portion of serial executions.

     For now, it's limited to profile processes, IOW system-wide
     profiling is not supported. You can add --latency option to enable
     this.

       $ perf record --latency -- make -C tools/perf

     I've run the above command for perf build which adds -j option to
     make with the number of CPUs in the system internally. Normally
     it'd show something like below:

       $ perf report -F overhead,comm
       ...
       #
       # Overhead  Command
       # ........  ...............
       #
           78.97%  cc1
            6.54%  python3
            4.21%  shellcheck
            3.28%  ld
            1.80%  as
            1.37%  cc1plus
            0.80%  sh
            0.62%  clang
            0.56%  gcc
            0.44%  perl
            0.39%  make
  	 ...

     The cc1 takes around 80% of the overhead as it's the actual
     compiler. However it runs in parallel so its contribution to
     latency may be less than that. Now, perf report will show both
     overhead and latency (if --latency was given at record time) like
     below:

       $ perf report -s comm
       ...
       #
       # Overhead   Latency  Command
       # ........  ........  ...............
       #
           78.97%    48.66%  cc1
            6.54%    25.68%  python3
            4.21%     0.39%  shellcheck
            3.28%    13.70%  ld
            1.80%     2.56%  as
            1.37%     3.08%  cc1plus
            0.80%     0.98%  sh
            0.62%     0.61%  clang
            0.56%     0.33%  gcc
            0.44%     1.71%  perl
            0.39%     0.83%  make
  	 ...

     You can see latency of cc1 goes down to around 50% and python3 and
     ld contribute a lot more than their overhead. You can use --latency
     option in perf report to get the same result but ordered by
     latency.

       $ perf report --latency -s comm

  perf report:

   - As a side effect of the latency profiling work, it adds a new
     output field 'latency' and a sort key 'parallelism'. The below is a
     result from my system with 64 CPUs. The build was well-parallelized
     but contained some serial portions.

       $ perf report -s parallelism
       ...
       #
       # Overhead   Latency  Parallelism
       # ........  ........  ...........
       #
           16.95%     1.54%           62
           13.38%     1.24%           61
           12.50%    70.47%            1
           11.81%     1.06%           63
            7.59%     0.71%           60
            4.33%    12.20%            2
            3.41%     0.33%           59
            2.05%     0.18%           64
            1.75%     1.09%            9
            1.64%     1.85%            5
            ...

   - Support Feodra mini-debuginfo which is a LZMA compressed symbol
     table inside ".gnu_debugdata" ELF section.

  perf annotate:

   - Add --code-with-type option to enable data-type profiling with the
     usual annotate output.

     Instead of focusing on data structure, it shows code annotation
     together with data type it accesses in case the instruction refers
     to a memory location (and it was able to resolve the target data
     type). Currently it only works with --stdio.

       $ perf annotate --stdio --code-with-type
       ...
        Percent |      Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
       ----------------------------------------------------------------------------------------------------------------------
                : 0                0xffffffff81050610 <__fdget>:
           0.00 :   ffffffff81050610:        callq   0xffffffff81c01b80 <__fentry__>           # data-type: (stack operation)
           0.00 :   ffffffff81050615:        pushq   %rbp              # data-type: (stack operation)
           0.00 :   ffffffff81050616:        movq    %rsp, %rbp
           0.00 :   ffffffff81050619:        pushq   %r15              # data-type: (stack operation)
           0.00 :   ffffffff8105061b:        pushq   %r14              # data-type: (stack operation)
           0.00 :   ffffffff8105061d:        pushq   %rbx              # data-type: (stack operation)
           0.00 :   ffffffff8105061e:        subq    $0x10, %rsp
           0.00 :   ffffffff81050622:        movl    %edi, %ebx
           0.00 :   ffffffff81050624:        movq    %gs:0x7efc4814(%rip), %rax  # 0x14e40 <current_task>              # data-type: struct task_struct* +0
           0.00 :   ffffffff8105062c:        movq    0x8d0(%rax), %r14         # data-type: struct task_struct +0x8d0 (files)
           0.00 :   ffffffff81050633:        movl    (%r14), %eax              # data-type: struct files_struct +0 (count.counter)
           0.00 :   ffffffff81050636:        cmpl    $0x1, %eax
           0.00 :   ffffffff81050639:        je      0xffffffff810506a9 <__fdget+0x99>
           0.00 :   ffffffff8105063b:        movq    0x20(%r14), %rcx          # data-type: struct files_struct +0x20 (fdt)
           0.00 :   ffffffff8105063f:        movl    (%rcx), %eax              # data-type: struct fdtable +0 (max_fds)
           0.00 :   ffffffff81050641:        cmpl    %ebx, %eax
           0.00 :   ffffffff81050643:        jbe     0xffffffff810506ef <__fdget+0xdf>
           0.00 :   ffffffff81050649:        movl    %ebx, %r15d
           5.56 :   ffffffff8105064c:        movq    0x8(%rcx), %rdx           # data-type: struct fdtable +0x8 (fd)
  	...

     The "# data-type:" part was added with this change. The first few
     entries are not very interesting. But later you can it accesses a
     couple of fields in the task_struct, files_struct and fdtable.

  perf trace:

   - Support syscall tracing for different ABI. For example it can trace
     system calls for 32-bit applications on 64-bit kernel
     transparently.

   - Add --summary-mode=total option to show global syscall summary. The
     default is 'thread' to show per-thread syscall summary.

  Python support:

   - Add more interfaces to 'perf' module to parse events, and config,
     enable or disable the event list properly so that it can implement
     basic functionalities purely in Python. There is an example code
     for these new interfaces in python/tracepoint.py.

   - Add mypy and pylint support to enable build time checking. Fix some
     code based on the findings from these tools.

  Internals:

   - Introduce io_dir__readdir() API to make directory traveral (usually
     for proc or sysfs) efficient with less memory footprint.

  JSON vendor events:

   - Add events and metrics for ARM Neoverse N3 and V3

   - Update events and metrics on various Intel CPUs

   - Add/update events for a number of SiFive processors"

* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
  perf bpf-filter: Fix a parsing error with comma
  perf report: Fix a memory leak for perf_env on AMD
  perf trace: Fix wrong size to bpf_map__update_elem call
  perf tools: annotate asm_pure_loop.S
  perf python: Fix setup.py mypy errors
  perf test: Address attr.py mypy error
  perf build: Add pylint build tests
  perf build: Add mypy build tests
  perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
  tools/build: Don't pass test log files to linker
  perf bench sched pipe: fix enforced blocking reads in worker_thread
  perf tools: Fix is_compat_mode build break in ppc64
  perf build: filter all combinations of -flto for libperl
  perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
  perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
  perf trace: Fix evlist memory leak
  perf trace: Fix BTF memory leak
  perf trace: Make syscall table stable
  perf syscalltbl: Mask off ABI type for MIPS system calls
  perf build: Remove Makefile.syscalls
  ...
2025-03-31 08:52:33 -07:00
Josh Poimboeuf
7ba0847fa1
spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock()
If requested_clk > 128, cdns_mrvl_xspi_setup_clock() iterates over the
entire cdns_mrvl_xspi_clk_div_list array without breaking out early,
causing 'i' to go beyond the array bounds.

Fix that by stopping the loop when it gets to the last entry, clamping
the clock to the minimum 6.25 MHz.

Fixes the following warning with an UBSAN kernel:

  vmlinux.o: warning: objtool: cdns_mrvl_xspi_setup_clock: unexpected end of section .text.cdns_mrvl_xspi_setup_clock

Fixes: 26d34fdc49 ("spi: cadence: Add clock configuration for Marvell xSPI overlay")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503282236.UhfRsF3B-lkp@intel.com/
Link: https://lore.kernel.org/r/gs2ooxfkblnee6cc5yfcxh7nu4wvoqnuv4lrllkhccxgcac2jg@7snmwd73jkhs
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/h6bef6wof6zpjfp3jbhrkigqsnykdfy6j4qmmvb6gsabhianhj@k57a7hwpa3bj
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 16:38:32 +01:00
Rodrigo Vivi
3f2bdccbcc
drm/xe: Restore EIO errno return when GuC PC start fails
Commit b4b05e53b5 ("drm/xe/guc_pc: Retry and wait longer for GuC PC
start"), leads to the following Smatch static checker warning:

        drivers/gpu/drm/xe/xe_guc_pc.c:1073 xe_guc_pc_start()
        warn: missing error code here? '_dev_err()' failed. 'ret' = '0'

Fixes: b4b05e53b5 ("drm/xe/guc_pc: Retry and wait longer for GuC PC start")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-xe/1454a5f1-ee18-4df1-a6b2-a4a3dddcd1cb@stanley.mountain/
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250328181752.26677-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-31 11:25:22 -04:00
Christophe JAILLET
1ebd494426
ASoC: codecs: rt5665: Fix some error handling paths in rt5665_probe()
Should an error occur after a successful regulator_bulk_enable() call,
regulator_bulk_disable() should be called, as already done in the remove
function.

Instead of adding an error handling path in the probe, switch from
devm_regulator_bulk_get() to devm_regulator_bulk_get_enable() and
simplify the remove function and some other places accordingly.

Finally, add a missing const when defining rt5665_supply_names to please
checkpatch and constify a few bytes.

Fixes: 33ada14a26 ("ASoC: add rt5665 codec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e3c2aa1b2fdfa646752d94f4af968630c0d58248.1742629525.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 16:14:07 +01:00
Lucas De Marchi
930af58421 drm/i915/dram: Consolidate logging of DRAM type
Instead of logging the dram type in the per version/platform function,
do it in the generic one. This fixes a few discrepancies depending on
the platform:

	- There was no DRAM type logging for graphics version 12 and
	  above
	- For graphics version 11, it would log the DRAM type in
	  skl_get_dram_info(), but could possibly override it later
	  without any log in icl_pcode_read_mem_global_info()

For bxt_get_dram_info(), there's no need to log the type for each dimm,
as the drm_WARN_ON() already covers the case they are not all the same.

This maintains the behavior of skl_get_dram_info() that would log the
DRAM type even on failures.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250324-dram-type-v1-2-bf60ef33ac01@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-03-31 08:09:40 -07:00
Lucas De Marchi
8d4bd9bb13 drm/i915/dram: Add missing INTEL_DRAM str conversions
Some new dram types were added without adding the corresponding string
conversion, probably because it's not being used by recent platforms.
Add them, together with a BUILD_BUG_ON() to ensure it keeps in sync, in
preparation to make use of them in recent platforms.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250324-dram-type-v1-1-bf60ef33ac01@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-03-31 08:09:40 -07:00
Gergo Koteles
ebca08fef8 ACPI: video: Handle fetching EDID as ACPI_TYPE_PACKAGE
The _DDC method should return a buffer, or an integer in case of an error.
But some Lenovo laptops incorrectly return EDID as buffer in ACPI package.

Calling _DDC generates this ACPI Warning:
ACPI Warning: \_SB.PCI0.GP17.VGA.LCD._DDC: Return type mismatch - \
found Package, expected Integer/Buffer (20240827/nspredef-254)

Use the first element of the package to get the EDID buffer.

The DSDT:

Name (AUOP, Package (0x01)
{
	Buffer (0x80)
	{
	...
	}
})

...

Method (_DDC, 1, NotSerialized)  // _DDC: Display Data Current
{
	If ((PAID == AUID))
        {
		Return (AUOP) /* \_SB_.PCI0.GP17.VGA_.LCD_.AUOP */
	}
	ElseIf ((PAID == IVID))
	{
		Return (IVOP) /* \_SB_.PCI0.GP17.VGA_.LCD_.IVOP */
	}
	ElseIf ((PAID == BOID))
	{
		Return (BOEP) /* \_SB_.PCI0.GP17.VGA_.LCD_.BOEP */
	}
	ElseIf ((PAID == SAID))
	{
		Return (SUNG) /* \_SB_.PCI0.GP17.VGA_.LCD_.SUNG */
	}

	Return (Zero)
}

Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/Apx_B_Video_Extensions/output-device-specific-methods.html#ddc-return-the-edid-for-this-device
Cc: stable@vger.kernel.org
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/61c3df83ab73aba0bc7a941a443cd7faf4cf7fb0.1743195250.git.soyer@irl.hu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-03-31 17:02:14 +02:00
Rodrigo Vivi
bee964bd14
drm/i915/display: Fix htmldocs build
Fixes a wrong documentation block indentation:

Documentation/gpu/i915:141: ./drivers/gpu/drm/i915/display/intel_hotplug.c:1080: ERROR: Unexpected indentation.
Documentation/gpu/i915:141: ./drivers/gpu/drm/i915/display/intel_hotplug.c:1082: WARNING: Block quote ends without a blank line; unexpected unindent.

v2: Use an empty line instead of changing block indentation (Imre)

Fixes: 0d77a3e0ea ("drm/i915/hpd: Add support for blocking the IRQ handling on an HPD pin")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/intel-gfx/20250312232506.47451f83@canb.auug.org.au/
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250328180829.25892-1-rodrigo.vivi@intel.com
Link: https://lore.kernel.org/r/20250328193202.40884-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-31 10:32:02 -04:00
Srinivas Kandagatla
a93dad6f4e
ASoC: q6apm-dai: make use of q6apm_get_hw_pointer
With the existing code, the buffer position is only reset in pointer
callback, which leaves the possiblity of it going over the size of
buffer size and reporting incorrect position to userspace.

Without this patch, its possible to see errors like:
snd-x1e80100 sound: invalid position: pcmC0D0p:0, pos = 12288, buffer size = 12288, period size = 1536
snd-x1e80100 sound: invalid position: pcmC0D0p:0, pos = 12288, buffer size = 12288, period size = 1536

Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 14:59:38 +01:00
Srinivas Kandagatla
5d01ed9b99
ASoC: qdsp6: q6apm-dai: fix capture pipeline overruns.
Period sizes less than 6k for capture path triggers overruns in the
dsp capture pipeline.

Change the period size and number of periods to value which DSP is happy with.

Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 14:59:37 +01:00
Srinivas Kandagatla
3107019501
ASoC: qdsp6: q6apm-dai: set 10 ms period and buffer alignment.
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.

Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.

Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 14:59:36 +01:00
Srinivas Kandagatla
0badb5432f
ASoC: q6apm: add q6apm_get_hw_pointer helper
Implement an helper function in q6apm to be able to read the current
hardware pointer for both read and write buffers.

This should help q6apm-dai to get the hardware pointer consistently
without it doing manual calculation, which could go wrong in some race
conditions.

Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 14:59:35 +01:00
Srinivas Kandagatla
3d4a4411aa
ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs
With the existing code, we are only setting up one period at a time, in a
ping-pong buffer style. This triggers lot of underruns in the dsp
leading to jitter noise during audio playback.

Fix this by scheduling all available periods, this will ensure that the dsp
has enough buffer feed and ultimatley fixing the underruns and audio
distortion.

Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 14:59:34 +01:00
Stuart Summers
c4eac40351 drm/xe: Don't print error about hwconfig when using execlists
This error message is only applicable for platforms using
GuC submission - to warn the user if the GuC they are using
or the platform they are running doesn't have this information
to provide to userspace about the platform. When forcing
execlist submission, which is something only used for debug,
the user is running at their own risk and should understand
the limitations of running without GuC.

v2 (John/Lucas): Don't print an info message with execlists

Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250328154236.9216-1-stuart.summers@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-03-31 06:28:03 -07:00
Pavel Begunkov
ed344511c5 io_uring: cleanup {g,s]etsockopt sqe reading
Add a local variable for the sqe pointer to avoid repetition.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8dbac0f9acda2d3842534eeb7ce10d9276b021ae.1743357108.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-31 07:08:46 -06:00
Pavel Begunkov
296e169618 io_uring: hide caches sqes from drivers
There is now an io_uring private part of cmd async_data, move saved sqe
into it. Drivers are accessing it via struct io_uring_cmd::cmd.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ecbe078dd57acefdbc4366d083327086c0879378.1743357121.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-31 07:08:34 -06:00
Pavel Begunkov
487a0710f8 io_uring: make zcrx depend on CONFIG_IO_URING
Reflect in the kconfig that zcrx requires io_uring compiled.

Fixes: 6f377873cb ("io_uring/zcrx: add interface queue and refill queue")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8047135a344e79dbd04ee36a7a69cc260aabc2ca.1743356260.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-31 07:07:44 -06:00
Pavel Begunkov
697b2876ac io_uring: add req flag invariant build assertion
We're caching some of file related request flags in a tricky way, put
a build check to make sure flags don't get reshuffled.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9877577b83c25dd78224a8274f799187e7ec7639.1743407551.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-31 07:07:34 -06:00
Jens Axboe
f28a71bc97 Documentation: ublk: remove dead footnote
A previous commit removed the use of this footnote, delete it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 3fdf2ec7da ("Documentation: ublk: Drop Stefan Hajnoczi's message footnote")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-31 07:06:22 -06:00
Joanne Koong
2d066800a4 fuse: remove unneeded atomic set in uring creation
When the ring is allocated, it is kzalloc-ed. ring->queue_refs will
already be initialized to 0 by default. It does not need to be
atomically set to 0.

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:59:27 +02:00
Joanne Koong
1dfe2a220e fuse: fix uring race condition for null dereference of fc
There is a race condition leading to a kernel crash from a null
dereference when attemping to access fc->lock in
fuse_uring_create_queue(). fc may be NULL in the case where another
thread is creating the uring in fuse_uring_create() and has set
fc->ring but has not yet set ring->fc when fuse_uring_create_queue()
reads ring->fc. There is another race condition as well where in
fuse_uring_register(), ring->nr_queues may still be 0 and not yet set
to the new value when we compare qid against it.

This fix sets fc->ring only after ring->fc and ring->nr_queues have been
set, which guarantees now that ring->fc is a proper pointer when any
queues are created and ring->nr_queues reflects the right number of
queues if ring is not NULL. We must use smp_store_release() and
smp_load_acquire() semantics to ensure the ordering will remain correct
where fc->ring is assigned only after ring->fc and ring->nr_queues have
been assigned.

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: 24fe962c86 ("fuse: {io-uring} Handle SQEs - register commands")
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:59:27 +02:00
Bernd Schubert
27992ef807 fuse: Increase FUSE_NAME_MAX to PATH_MAX
Our file system has a translation capability for S3-to-posix.
The current value of 1kiB is enough to cover S3 keys, but
does not allow encoding of %xx escape characters.
The limit is increased to (PATH_MAX - 1), as we need
3 x 1024 and that is close to PATH_MAX (4kB) already.
-1 is used as the terminating null is not included in the
length calculation.

Testing large file names was hard with libfuse/example file systems,
so I created a new memfs that does not have a 255 file name length
limitation.
https://github.com/libfuse/libfuse/pull/1077

The connection is initialized with FUSE_NAME_LOW_MAX, which
is set to the previous value of FUSE_NAME_MAX of 1024. With
FUSE_MIN_READ_BUFFER of 8192 that is enough for two file names
+ fuse headers.
When FUSE_INIT reply sets max_pages to a value > 1 we know
that fuse daemon supports request buffers of at least 2 pages
(+ header) and can therefore hold 2 x PATH_MAX file names - operations
like rename or link that need two file names are no issue then.

Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:59:27 +02:00
Bernd Schubert
2412085da3 fuse: Allocate only namelen buf memory in fuse_notify_
fuse_notify_inval_entry and fuse_notify_delete were using fixed allocations
of FUSE_NAME_MAX to hold the file name. Often that large buffers are not
needed as file names might be smaller, so this uses the actual file name
size to do the allocation.

Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:59:27 +02:00
Joanne Koong
9b17cb59a7 fuse: add default_request_timeout and max_request_timeout sysctls
Introduce two new sysctls, "default_request_timeout" and
"max_request_timeout". These control how long (in seconds) a server can
take to reply to a request. If the server does not reply by the timeout,
then the connection will be aborted. The upper bound on these sysctl
values is 65535.

"default_request_timeout" sets the default timeout if no timeout is
specified by the fuse server on mount. 0 (default) indicates no default
timeout should be enforced. If the server did specify a timeout, then
default_request_timeout will be ignored.

"max_request_timeout" sets the max amount of time the server may take to
reply to a request. 0 (default) indicates no maximum timeout. If
max_request_timeout is set and the fuse server attempts to set a
timeout greater than max_request_timeout, the system will use
max_request_timeout as the timeout. Similarly, if default_request_timeout
is greater than max_request_timeout, the system will use
max_request_timeout as the timeout. If the server does not request a
timeout and default_request_timeout is set to 0 but max_request_timeout
is set, then the timeout will be max_request_timeout.

Please note that these timeouts are not 100% precise. The request may
take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the set max
timeout due to how it's internally implemented.

$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0

$ echo 65536 | sudo tee /proc/sys/fs/fuse/default_request_timeout
tee: /proc/sys/fs/fuse/default_request_timeout: Invalid argument

$ echo 65535 | sudo tee /proc/sys/fs/fuse/default_request_timeout
65535

$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 65535

$ echo 0 | sudo tee /proc/sys/fs/fuse/default_request_timeout
0

$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0

[Luis Henriques: Limit the timeout to the range [FUSE_TIMEOUT_TIMER_FREQ,
fuse_max_req_timeout]]

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:59:27 +02:00
Joanne Koong
0f6439f61a fuse: add kernel-enforced timeout option for requests
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.

This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.

Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.

[SzM: Bump the API version number]

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:59:25 +02:00
Miklos Szeredi
eef36cf6a7 fuse: optmize missing FUSE_LINK support
If filesystem doesn't support FUSE_LINK (i.e. returns -ENOSYS), then
remember this and next time return immediately, without incurring the
overhead of a round trip to the server.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:55:36 +02:00
Matt Johnston
8344213571 fuse: Return EPERM rather than ENOSYS from link()
link() is documented to return EPERM when a filesystem doesn't support
the operation, return that instead.

Link: https://github.com/libfuse/libfuse/issues/925
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:55:36 +02:00
Luis Henriques
841c7b812c fuse: removed unused function fuse_uring_create() from header
Function fuse_uring_create() is used only from dev_uring.c and does not
need to be exposed in the header file.  Furthermore, it has the wrong
signature.

While there, also remove the 'struct fuse_ring' forward declaration.

Signed-off-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:55:36 +02:00
Bernd Schubert
09098e62e4 fuse: {io-uring} Fix a possible req cancellation race
task-A (application) might be in request_wait_answer and
try to remove the request when it has FR_PENDING set.

task-B (a fuse-server io-uring task) might handle this
request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when
fetching the next request and accessed the req from
the pending list in fuse_uring_ent_assign_req().
That code path was not protected by fiq->lock and so
might race with task-A.

For scaling reasons we better don't use fiq->lock, but
add a handler to remove canceled requests from the queue.

This also removes usage of fiq->lock from
fuse_uring_add_req_to_ring_ent() altogether, as it was
there just to protect against this race and incomplete.

Also added is a comment why FR_PENDING is not cleared.

Fixes: c090c8abae ("fuse: Add io-uring sqe commit and fetch support")
Cc: <stable@vger.kernel.org> # v6.14
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-31 14:53:02 +02:00
Jim Liu
4f1eaabb4b net: phy: broadcom: Correct BCM5221 PHY model detection
Correct detect condition is applied to the entire 5221 family of PHYs.

Fixes: 3abbd0699b ("net: phy: broadcom: add support for BCM5221 phy")
Signed-off-by: Jim Liu <jim.t90615@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-31 13:47:41 +01:00
Jacek Lawrynowicz
d893da85e0 accel/ivpu: Fix PM related deadlocks in MS IOCTLs
Prevent runtime resume/suspend while MS IOCTLs are in progress.
Failed suspend will call ivpu_ms_cleanup() that would try to acquire
file_priv->ms_lock, which is already held by the IOCTLs.

Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114306.3740022-3-maciej.falkowski@linux.intel.com
2025-03-31 14:19:05 +02:00
Jacek Lawrynowicz
9a6f56762d accel/ivpu: Fix deadlock in ivpu_ms_cleanup()
Fix deadlock in ivpu_ms_cleanup() by preventing runtime resume after
file_priv->ms_lock is acquired.

During a failure in runtime resume, a cold boot is executed, which
calls ivpu_ms_cleanup_all(). This function calls ivpu_ms_cleanup()
that acquires file_priv->ms_lock and causes the deadlock.

Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114306.3740022-2-maciej.falkowski@linux.intel.com
2025-03-31 14:19:05 +02:00
Andi Shyti
4e22d5b8ba drm/i915/gem: Convert SPDX headers to single-line format
Replace multi-line SPDX license headers with single-line
equivalents (// SPDX-License-Identifier: MIT or /* ... */ for
headers), as preferred by current kernel coding style.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mikołaj Wasiak <mikolaj.wasiak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327232629.2939-1-andi.shyti@linux.intel.com
2025-03-31 14:18:13 +02:00
Jacek Lawrynowicz
6b4568b675 accel/ivpu: Fix warning in ivpu_ipc_send_receive_internal()
Warn if device is suspended only when runtime PM is enabled.
Runtime PM is disabled during reset/recovery and it is not an error
to use ivpu_ipc_send_receive_internal() in such cases.

Fixes: 5eaa497411 ("accel/ivpu: Prevent recovery invocation during probe and resume")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114219.3739951-1-maciej.falkowski@linux.intel.com
2025-03-31 14:18:10 +02:00
Giovanni Gherdovich
9e9b893404 ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are invalid
Prior to commit 496121c021 ("ACPI: processor: idle: Allow probing on
platforms with one ACPI C-state"), the acpi_idle driver wouldn't load on
systems without a valid C-State at least as deep as C2.

The behavior was desirable for guests on hypervisors such as VMWare
ESXi, which by default don't have the _CST ACPI method, and set the C2
and C3 latencies to 101 and 1001 microseconds respectively via the FADT,
to signify they're unsupported.

Since the above change though, these virtualized deployments end up
loading acpi_idle, and thus entering the default C1 C-State set by
acpi_processor_get_power_info_default(); this is undesirable for a
system that's communicating to the OS it doesn't want C-States (missing
_CST, and invalid C2/C3 in FADT).

Make acpi_processor_get_power_info_fadt() return -ENODEV in that case,
so that acpi_processor_get_cstate_info() exits early and doesn't set
pr->flags.power = 1.

Fixes: 496121c021 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250328143040.9348-1-ggherdovich@suse.cz
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-03-31 13:59:04 +02:00
Peter Ujfalusi
7d783d9074
ASoC: SOF: hda/ptl: Move mic privacy change notification sending to a work
IPC message cannot be sent from the irq thread directly as the message will
not receive the reply (interrupts are disabled) and it will time out - the
reply is going to be received right after the we leave the irq thread.
This is a different case compared to the delayed IPC messages due to DSP
busy state.

Add support for sending the mic privacy change notification to the firmware
from a work instead of the process callback.

The work needs to be canceled if there is a chance that it might be running
on module remove or before system/runtime suspend.

Fixes: 4a43c3241e ("ASoC: SOF: Intel: ptl: Add support for mic privacy")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250331070623.5985-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-31 12:51:55 +01:00
Vinod Govindapillai
010363c461 drm/i915/display: implement wa_18038517565
Disable FBC compressor clock gating before enabling FBC and
clear it after disabling FBC.

v2: update the DG2 registers for this wa

v3: use local variable and single line reg definition (Jani)

Bspec: 74212, 72197, 69741, 65555
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250330172616.718188-1-vinod.govindapillai@intel.com
2025-03-31 14:36:50 +03:00
Ariel D'Alessandro
bfb20a6558 drm/panfrost: Force AARCH64_4K page table format on MediaTek MT8192
MediaTek MT8192 SoC has an ARM Mali-G57 MC5 GPU (Valhall-JM). Now that
Panfrost supports AARCH64_4K page table format, let's enable it on this
SoC.

Running glmark2-es2-drm [0] benchmark, reported the same performance
score on both modes Mali LPAE (LEGACY) vs. AARCH64_4K, before and after
this commit. Tested on a Mediatek (MT8395) Genio 1200 EVK board.

[0] https://github.com/glmark2/glmark2

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-7-ariel.dalessandro@collabora.com
2025-03-31 12:12:55 +01:00
Ariel D'Alessandro
21fc936cae drm/panfrost: Force AARCH64_4K page table format on MediaTek MT8188
MediaTek MT8188 SoC has an ARM Mali-G57 MC3 GPU (Valhall-JM), which
constantly faults with the current panfrost support.

For instance, running `glmark2-es2-drm` benchmark test:
```
[   79.617461] panfrost 13000000.gpu: js fault, js=1, status=JOB_BUS_FAULT, head=0xaadc380, tail=0xaadc380
[   80.119811] panfrost 13000000.gpu: gpu sched timeout, js=0, config=0x7300, status=0x58, head=0xaaca180, tail=0xaaca180, sched_job=000000002fd03ccc
[   80.129083] panfrost 13000000.gpu: Unhandled Page fault in AS0 at VA 0x0000000000000000
[   80.129083] Reason: TODO
[   80.129083] raw fault status: 0x1C2
[   80.129083] decoded fault status: SLAVE FAULT
[   80.129083] exception type 0xC2: TRANSLATION_FAULT_2
[   80.129083] access type 0x1: EXECUTE
[   80.129083] source id 0x0
```

Note that current panfrost mode (Mali LPAE - LEGACY) only allows to
specify write-cache or implementation-defined as the caching policy,
probably not matching the right configuration. As depicted in the source
code:

drivers/iommu/io-pgtable-arm.c:
```
* MEMATTR: Mali has no actual notion of a non-cacheable type, so the
* best we can do is mimic the out-of-tree driver and hope that the
* "implementation-defined caching policy" is good enough...
```

Now that Panfrost supports AARCH64_4K page table format, let's enable it
on Mediatek MT8188 and configure the cache/shareability policies
properly.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-6-ariel.dalessandro@collabora.com
2025-03-31 12:12:48 +01:00
Ariel D'Alessandro
f49dfccc76 drm/panfrost: Add support for AARCH64_4K page table format
Currently, Panfrost only supports MMU configuration in "LEGACY" (as
Bifrost calls it) mode, a (modified) version of LPAE "Large Physical
Address Extension", which in Linux we've called "mali_lpae".

This commit adds support for conditionally enabling AARCH64_4K page
table format. To achieve that, a "GPU optional quirks" field was added
to `struct panfrost_features` with the related flag.

Note that, in order to enable AARCH64_4K mode, the GPU variant must have
the HW_FEATURE_AARCH64_MMU feature flag present.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-5-ariel.dalessandro@collabora.com
2025-03-31 12:12:15 +01:00
Jouni Högander
9900e35a3a drm/i915/psr: Add PSR pause/resume reference count
We have now seen this:

<4> [2120.434153] i915 0000:00:02.0: [drm] drm_WARN_ON(psr->paused)
<4> [2120.434196] WARNING: CPU: 3 PID: 4430 at drivers/gpu/drm/i915/display/intel_psr.c:2227 intel_psr_pause+0x16e/0x180 [i915]

Comment for drm_WARN_ON(display->drm, psr->paused) in intel_psr_pause says:

"If we ever hit this, we will need to add refcount to pause/resume"

This patch is implementing PSR pause/resume refcount.

v3: Incorporate changes missing from v2
v2: Add drm_warn for detecting possible unbalanced pause/resume

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250328080623.1183669-1-jouni.hogander@intel.com
2025-03-31 14:12:14 +03:00
Ariel D'Alessandro
db599be9f3 drm/panfrost: Set HW_FEATURE_AARCH64_MMU feature flag on Bifrost models
Set this feature flag on all Mali Bifrost platforms as the MMU supports
AARCH64 4K page table format.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-4-ariel.dalessandro@collabora.com
2025-03-31 12:08:28 +01:00
Ariel D'Alessandro
0b9bcf9a76 drm/panfrost: Use GPU_MMU_FEATURES_VA_BITS/PA_BITS macros
As done in panthor, define and use these GPU_MMU_FEATURES_* macros,
which makes code easier to read and reuse.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-3-ariel.dalessandro@collabora.com
2025-03-31 12:08:19 +01:00
Ariel D'Alessandro
f91e534f4e drm/panfrost: Set IOMMU_CACHE flag
Panfrost does not support uncached mappings, so flag them properly. Also
flag the pages that are mapped as response to a page fault as cached.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-2-ariel.dalessandro@collabora.com
2025-03-31 12:08:10 +01:00
Yeoreum Yun
a3c3c66670 perf/core: Fix child_total_time_enabled accounting bug at task exit
The perf events code fails to account for total_time_enabled of
inactive events.

Here is a failure case for accounting total_time_enabled for
CPU PMU events:

  sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
  ...

  armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
  armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
                             `          `          `
                             `          `          > total_time_running with child
                             `          > total_time_enabled with child
                             > count with child

  Performance counter stats for 'stress-ng --pthread=2 -t 2s':

       1,138,698,008      armv8_pmuv3_0/event=0x08/                                               (94.99%)
       1,826,791,390      armv8_pmuv3_1/event=0x08/                                               (43.47%)

The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU.  In theory, the total enabled time should
be same for both events, as two events are opened and closed together.

As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).

This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:

  perf_event_exit_event()
   `> perf_remove_from_context()
     `> __perf_remove_from_context()
       `> perf_child_detach()   -> Accumulate child_total_time_enabled
         `> list_del_event()    -> Update child event's time

The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.

The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.

Then, perf_child_detach() populates the time into the parent's time metrics.

After this patch, the bug is fixed:

  sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
  ...
  armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
  armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940

   Performance counter stats for 'stress-ng --pthread=2 -t 10s':

      15,396,770,398      armv8_pmuv3_0/event=0x08/                                               (68.10%)
      22,428,964,974      armv8_pmuv3_1/event=0x08/                                               (31.90%)

[ mingo: Clarified the changelog. ]

Fixes: ef54c1a476 ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
2025-03-31 12:57:38 +02:00
Niklas Schnelle
807c274303 s390/pci: Fix dev.dma_range_map missing sentinel element
The fixed commit sets up dev.dma_range_map but missed that this is
supposed to be an array of struct bus_dma_region with a sentinel element
with the size field set to 0 at the end. This would lead to overruns in
e.g. dma_range_map_min(). It could also result in wrong translations
instead of DMA_MAPPING_ERROR in translate_phys_to_dma() if the paddr
were to not fit in the aperture. Fix this by using the
dma_direct_set_offset() helper which creates a sentinel for us.

Fixes: d236843a69 ("s390/pci: store DMA offset in bus_dma_region")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20250312-fix_dma_map_alloc-v2-1-530108d9de21@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-31 12:20:44 +02:00