An indirect ctx wabb is implemented as per Wa_22011450934 to avoid rcs
restore hang during context restore of a preempted context in GPGPU mode
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Chris Wilson <chris.p.wilson@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128185209.18077-2-ramalingam.c@intel.com
commit c50df701d4 ("drm/i915: Enable rpm wakeref tracking
whether runtime pm is enabled or not") enabled wakeref tracking
even for the mock device. Turns out that has somewhat significant
overhead, and on the glacial Core m3's we have in CI the vma
selftests are now exceeding the allotted time budget.
So let's disable the wakeref tracking once again for the mock
device in order to avoid blowing up the selftest runtime.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204171053.18409-1-ville.syrjala@linux.intel.com
The mv88e6352, mv88e6240 and mv88e6176 have a serdes interface. This patch
allows to configure the output swing to a desired value in the
phy-handle of the port. The value which is peak to peak has to be
specified in microvolts. As the chips only supports eight dedicated
values we return EINVAL if the value in the DTS does not match one of
these values.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Common PHYs and network PCSes often have the possibility to specify
peak-to-peak voltage on the differential pair - the default voltage
sometimes needs to be changed for a particular board.
Add properties `tx-p2p-microvolt` and `tx-p2p-microvolt-names` for this
purpose. The second property is needed to specify the mode for the
corresponding voltage in the `tx-p2p-microvolt` property, if the voltage
is to be used only for speficic mode. More voltage-mode pairs can be
specified.
Example usage with only one voltage (it will be used for all supported
PHY modes, the `tx-p2p-microvolt-names` property is not needed in this
case):
tx-p2p-microvolt = <915000>;
Example usage with voltages for multiple modes:
tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
tx-p2p-microvolt-names = "2500base-x", "usb", "pcie";
Add these properties into a separate file phy/transmit-amplitude.yaml,
which should be referenced by any binding that uses it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
trace_napi_poll_hit() is reading stat->dev while another thread can write
on it from dropmon_net_event()
Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already,
we only have to take care of load/store tearing.
BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit
write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1:
dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579
notifier_call_chain kernel/notifier.c:84 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392
call_netdevice_notifiers_info net/core/dev.c:1919 [inline]
call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
call_netdevice_notifiers net/core/dev.c:1945 [inline]
unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415
ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123
vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515
ops_exit_list net/core/net_namespace.c:173 [inline]
cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0:
trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292
trace_napi_poll include/trace/events/napi.h:14 [inline]
__napi_poll+0x36b/0x3f0 net/core/dev.c:6366
napi_poll net/core/dev.c:6432 [inline]
net_rx_action+0x29e/0x650 net/core/dev.c:6519
__do_softirq+0x158/0x2de kernel/softirq.c:558
do_softirq+0xb1/0xf0 kernel/softirq.c:459
__local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:394 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
value changed: 0xffff88815883e000 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker
Fixes: 4ea7e38696 ("dropmon: add ability to detect when hardware dropsrxpackets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->rtm_tos option is normally used to route packets based on both
the destination address and the DS field. However it's ignored for
IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route
is going to work only on the destination address anyway, so it won't
behave as specified.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
More aggressive DSA cleanup
This series deletes some code which is apparently not needed.
I've had these patches in my tree for a while, and testing on my boards
didn't reveal any issues.
Compared to the RFC v1 series, the only change is the addition of patch 3.
https://patchwork.kernel.org/project/netdevbpf/cover/20220107184842.550334-1-vladimir.oltean@nxp.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 2f1e8ea726 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), suggested by Cong Wang, the
DSA interfaces and their master have different dev->nested_level, which
makes netif_addr_lock() stop complaining about potentially recursive
locking on the same lock class.
So we no longer need DSA slave interfaces to have their own lockdep
class.
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 2f1e8ea726 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), suggested by Cong Wang, the
DSA interfaces and their master have different dev->nested_level, which
makes netif_addr_lock() stop complaining about potentially recursive
locking on the same lock class.
So we no longer need DSA masters to have their own lockdep class.
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no legacy ports, DSA registers a devlink instance with ports
unconditionally for all switch drivers. Therefore, delete the old-style
ndo operations used for determining bridge forwarding domains.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
D. Wythe says:
====================
net/smc: Optimizing performance in short-lived scenarios
This patch set aims to optimizing performance of SMC in short-lived
links scenarios, which is quite unsatisfactory right now.
In our benchmark, we test it with follow scripts:
./wrk -c 10000 -t 4 -H 'Connection: Close' -d 20 http://smc-server
Current performance figures like that:
Running 20s test @ http://11.213.45.6
4 threads and 10000 connections
4956 requests in 20.06s, 3.24MB read
Socket errors: connect 0, read 0, write 672, timeout 0
Requests/sec: 247.07
Transfer/sec: 165.28KB
There are many reasons for this phenomenon, this patch set doesn't
solve it all though, but it can be well alleviated with it in.
Patch 1/5 (Make smc_tcp_listen_work() independent) :
Separate smc_tcp_listen_work() from smc_listen_work(), make them
independent of each other, the busy SMC handshake can not affect new TCP
connections visit any more. Avoid discarding a large number of TCP
connections after being overstock, which is undoubtedly raise the
connection establishment time.
Patch 2/5 (Limit SMC backlog connections):
Since patch 1 has separated smc_tcp_listen_work() from
smc_listen_work(), an unrestricted TCP accept have come into being. This
patch try to put a limit on SMC backlog connections refers to
implementation of TCP.
Patch 3/5 (Limit SMC visits when handshake workqueue congested):
Considering the complexity of SMC handshake right now, in short-lived
links scenarios, this may not be the main scenario of SMC though, it's
performance is still quite poor. This patch try to provide constraint on
SMC handshake when handshake workqueue congested, which is the sign of
SMC handshake stacking in our opinion.
Patch 4/5 (Dynamic control handshake limitation by socket options)
This patch allow applications dynamically control the ability of SMC
handshake limitation. Since SMC don't support set SMC socket option
before,
this patch also have to support SMC's owns socket options.
Patch 5/5 (Add global configure for handshake limitation by netlink)
This patch provides a way to get benefit of handshake limitation
without
modifying any code for applications, which is quite useful for most
existing applications.
After this patch set, performance figures like that:
Running 20s test @ http://11.213.45.6
4 threads and 10000 connections
693253 requests in 20.10s, 452.88MB read
Requests/sec: 34488.13
Transfer/sec: 22.53MB
That's a quite well performance improvement, about to 6 to 7 times in my
environment.
---
changelog:
v1 -> v2:
- fix compile warning
- fix invalid dependencies in kconfig
v2 -> v3:
- correct spelling mistakes
- fix useless variable declare
v3 -> v4
- make smc_tcp_ls_wq be static
v4 -> v5
- add dynamic control for SMC auto fallback by socket options
- add global configure for SMC auto fallback through netlink
v5 -> v6
- move auto fallback to net namespace scope
- remove auto fallback attribute in SMC_GEN_SYS_INFO
- add independent attributes for auto fallback
v6 -> v7
- fix wording and the naming issues, rename 'auto fallback' to handshake
limitation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Although we can control SMC handshake limitation through socket options,
which means that applications who need it must modify their code. It's
quite troublesome for many existing applications. This patch modifies
the global default value of SMC handshake limitation through netlink,
providing a way to put constraint on handshake without modifies any code
for applications.
Suggested-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch aims to add dynamic control for SMC handshake limitation for
every smc sockets, in production environment, it is possible for the
same applications to handle different service types, and may have
different opinion on SMC handshake limitation.
This patch try socket options to complete it, since we don't have socket
option level for SMC yet, which requires us to implement it at the same
time.
This patch does the following:
- add new socket option level: SOL_SMC.
- add new SMC socket option: SMC_LIMIT_HS.
- provide getter/setter for SMC socket options.
Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch intends to provide a mechanism to put constraint on SMC
connections visit according to the pressure of SMC handshake process.
At present, frequent visits will cause the incoming connections to be
backlogged in SMC handshake queue, raise the connections established
time. Which is quite unacceptable for those applications who base on
short lived connections.
There are two ways to implement this mechanism:
1. Put limitation after TCP established.
2. Put limitation before TCP established.
In the first way, we need to wait and receive CLC messages that the
client will potentially send, and then actively reply with a decline
message, in a sense, which is also a sort of SMC handshake, affect the
connections established time on its way.
In the second way, the only problem is that we need to inject SMC logic
into TCP when it is about to reply the incoming SYN, since we already do
that, it's seems not a problem anymore. And advantage is obvious, few
additional processes are required to complete the constraint.
This patch use the second way. After this patch, connections who beyond
constraint will not informed any SMC indication, and SMC will not be
involved in any of its subsequent processes.
Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation does not handling backlog semantics, one
potential risk is that server will be flooded by infinite amount
connections, even if client was SMC-incapable.
This patch works to put a limit on backlog connections, referring to the
TCP implementation, we divides SMC connections into two categories:
1. Half SMC connection, which includes all TCP established while SMC not
connections.
2. Full SMC connection, which includes all SMC established connections.
For half SMC connection, since all half SMC connections starts with TCP
established, we can achieve our goal by put a limit before TCP
established. Refer to the implementation of TCP, this limits will based
on not only the half SMC connections but also the full connections,
which is also a constraint on full SMC connections.
For full SMC connections, although we know exactly where it starts, it's
quite hard to put a limit before it. The easiest way is to block wait
before receive SMC confirm CLC message, while it's under protection by
smc_server_lgr_pending, a global lock, which leads this limit to the
entire host instead of a single listen socket. Another way is to drop
the full connections, but considering the cast of SMC connections, we
prefer to keep full SMC connections.
Even so, the limits of full SMC connections still exists, see commits
about half SMC connection below.
After this patch, the limits of backend connection shows like:
For SMC:
1. Client with SMC-capability can makes 2 * backlog full SMC connections
or 1 * backlog half SMC connections and 1 * backlog full SMC
connections at most.
2. Client without SMC-capability can only makes 1 * backlog half TCP
connections and 1 * backlog full TCP connections.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In multithread and 10K connections benchmark, the backend TCP connection
established very slowly, and lots of TCP connections stay in SYN_SENT
state.
Client: smc_run wrk -c 10000 -t 4 http://server
the netstate of server host shows like:
145042 times the listen queue of a socket overflowed
145042 SYNs to LISTEN sockets dropped
One reason of this issue is that, since the smc_tcp_listen_work() shared
the same workqueue (smc_hs_wq) with smc_listen_work(), while the
smc_listen_work() do blocking wait for smc connection established. Once
the workqueue became congested, it's will block the accept() from TCP
listen.
This patch creates a independent workqueue(smc_tcp_ls_wq) for
smc_tcp_listen_work(), separate it from smc_listen_work(), which is
quite acceptable considering that smc_tcp_listen_work() runs very fast.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CONFIG_RT_MUTEXES option is enabled by CONFIG_FUTEX and CONFIG_I2C.
If both are disabled then a CONFIG_PREEMPT_RT build fails to compile.
It is not possible to have a PREEMPT_RT kernel without RT_MUTEX support
because RT_MUTEX based locking is always used.
Enable CONFIG_RT_MUTEXES by default on PREEMPT_RT builds.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YgKmhjkcuqWXdUjQ@linutronix.de
It has been said that local_lock() does not add any overhead compared to
preempt_disable() in a !LOCKDEP configuration. A micro benchmark showed
an unexpected result which can be reduced to the fact that local_lock()
was not entirely optimized away.
In the !LOCKDEP configuration local_lock_acquire() is an empty static
inline function. On x86 the this_cpu_ptr() argument of that function is
fully evaluated leading to an additional mov+add instructions which are
not needed and not used.
Replace the static inline function with a macro. The typecheck() macro
ensures that the argument is of proper type while the resulting
disassembly shows no traces of this_cpu_ptr().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/YgKjciR60fZft2l4@linutronix.de
Arnd reports that on 32-bit architectures, the fallbacks for
atomic64_read_acquire() and atomic64_set_release() are broken as they
use smp_load_acquire() and smp_store_release() respectively, which do
not work on types larger than the native word size.
Since those contain compiletime_assert_atomic_type(), any attempt to use
those fallbacks will result in a build-time error. e.g. with the
following added to arch/arm/kernel/setup.c:
| void test_atomic64(atomic64_t *v)
| {
| atomic64_set_release(v, 5);
| atomic64_read_acquire(v);
| }
The compiler will complain as follows:
| In file included from <command-line>:
| In function 'arch_atomic64_set_release',
| inlined from 'test_atomic64' at ./include/linux/atomic/atomic-instrumented.h:669:2:
| ././include/linux/compiler_types.h:346:38: error: call to '__compiletime_assert_9' declared with attribute error: Need native word sized stores/loads for atomicity.
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^
| ././include/linux/compiler_types.h:327:4: note: in definition of macro '__compiletime_assert'
| 327 | prefix ## suffix(); \
| | ^~~~~~
| ././include/linux/compiler_types.h:346:2: note: in expansion of macro '_compiletime_assert'
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^~~~~~~~~~~~~~~~~~~
| ././include/linux/compiler_types.h:349:2: note: in expansion of macro 'compiletime_assert'
| 349 | compiletime_assert(__native_word(t), \
| | ^~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:133:2: note: in expansion of macro 'compiletime_assert_atomic_type'
| 133 | compiletime_assert_atomic_type(*p); \
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:164:55: note: in expansion of macro '__smp_store_release'
| 164 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| | ^~~~~~~~~~~~~~~~~~~
| ./include/linux/atomic/atomic-arch-fallback.h:1270:2: note: in expansion of macro 'smp_store_release'
| 1270 | smp_store_release(&(v)->counter, i);
| | ^~~~~~~~~~~~~~~~~
| make[2]: *** [scripts/Makefile.build:288: arch/arm/kernel/setup.o] Error 1
| make[1]: *** [scripts/Makefile.build:550: arch/arm/kernel] Error 2
| make: *** [Makefile:1831: arch/arm] Error 2
Fix this by only using smp_load_acquire() and smp_store_release() for
native atomic types, and otherwise falling back to the regular barriers
necessary for acquire/release semantics, as we do in the more generic
acquire and release fallbacks.
Since the fallback templates are used to generate the atomic64_*() and
atomic_*() operations, the __native_word() check is added to both. For
the atomic_*() operations, which are always 32-bit, the __native_word()
check is redundant but not harmful, as it is always true.
For the example above this works as expected on 32-bit, e.g. for arm
multi_v7_defconfig:
| <test_atomic64>:
| push {r4, r5}
| dmb ish
| pldw [r0]
| mov r2, #5
| mov r3, #0
| ldrexd r4, [r0]
| strexd r4, r2, [r0]
| teq r4, #0
| bne 484 <test_atomic64+0x14>
| ldrexd r2, [r0]
| dmb ish
| pop {r4, r5}
| bx lr
... and also on 64-bit, e.g. for arm64 defconfig:
| <test_atomic64>:
| bti c
| paciasp
| mov x1, #0x5
| stlr x1, [x0]
| ldar x0, [x0]
| autiasp
| ret
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220207101943.439825-1-mark.rutland@arm.com
This patch adds __sched attributes to a few missing places
to show blocked function rather than locking function
in get_wchan.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220115231657.84828-1-minchan@kernel.org
If we fail to copy the just created file descriptor to userland, we
try to clean up by putting back 'fd' and freeing 'ib'. The code uses
put_unused_fd() for the former which is wrong, as the file descriptor
was already published by fd_install() which gets called internally by
anon_inode_getfd().
This makes the error handling code leaving a half cleaned up file
descriptor table around and a partially destructed 'file' object,
allowing userland to play use-after-free tricks on us, by abusing
the still usable fd and making the code operate on a dangling
'file->private_data' pointer.
Instead of leaving the kernel in a partially corrupted state, don't
attempt to explicitly clean up and leave this to the process exit
path that'll release any still valid fds, including the one created
by the previous call to anon_inode_getfd(). Simply return -EFAULT to
indicate the error.
Fixes: f73f7f4da5 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device")
Cc: stable@kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nuno Sa <Nuno.Sa@analog.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Schema changes:
- support for mdio-connected switches (mdio driver), recognized by
checking the presence of property "reg"
- new compatible strings for rtl8367s and rtl8367rb
- "interrupt-controller" was not added as a required property. It might
still work polling the ports when missing.
Examples changes:
- renamed "switch_intc" to make it unique between examples
- removed "dsa-mdio" from mdio compatible property
- renamed phy@0 to ethernet-phy@0 (not tested with real HW)
phy@ requires #phy-cells
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback functions of clcsock will be saved and replaced during
the fallback. But if the fallback happens more than once, then the
copies of these callback functions will be overwritten incorrectly,
resulting in a loop call issue:
clcsk->sk_error_report
|- smc_fback_error_report() <------------------------------|
|- smc_fback_forward_wakeup() | (loop)
|- clcsock_callback() (incorrectly overwritten) |
|- smc->clcsk_error_report() ------------------|
So this patch fixes the issue by saving these function pointers only
once in the fallback and avoiding overwriting.
Reported-by: syzbot+4de3c0e8a263e1e499bc@syzkaller.appspotmail.com
Fixes: 341adeec9a ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Link: https://lore.kernel.org/r/0000000000006d045e05d78776f6@google.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
i.MX8QM lpuart is backwards compatible with i.MX8QXP, so lets remove
the single match from enum. This will force nodes to have both compatible
strings, since there is already an 'items' entry for that.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220210201407.567860-2-abel.vesa@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the i.MX8QXP backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220210201407.567860-1-abel.vesa@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, even when `delay_rts_before_send` and `delay_rts_after_send`
are 0, the hrtimer is triggered (with timeout 0) which can introduce a
few 100us of additional overhead on slower i.MX platforms.
Implement a fast path when the delays are 0, where the RTS signal is
toggled immediately instead of going through an hrtimer. This fast path
behaves identical to the code before delay support was implemented.
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Link: https://lore.kernel.org/r/20220119145204.238767-1-hws@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always
result in the pending interrupts being accurately reported if they are
mapped to a HW interrupt. This is particularily visible when acking
the timer interrupt and reading the GICR_ISPENDR1 register immediately
after, for example (the interrupt appears as not-pending while it really
is...).
This is because a HW interrupt has its 'active and pending state' kept
in the *physical* distributor, and not in the virtual one, as mandated
by the spec (this is what allows the direct deactivation). The virtual
distributor only caries the pending and active *states* (note the
plural, as these are two independent and non-overlapping states).
Fix it by reading the HW state back, either from the timer itself or
from the distributor if necessary.
Reported-by: Ricardo Koller <ricarkol@google.com>
Tested-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208123726.3604198-1-maz@kernel.org
Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the typec connector node for EUD which is attached to
EUD node via port. EUD is also attached to DWC3 node via port.
Also add the role-switch property to dwc3 node.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/b2b6bdf0e7589a7b6a6f9b390b227339636e0da9.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for control peripheral of EUD (Embedded USB Debugger) to
listen to events such as USB attach/detach, pet EUD to indicate software
is functional.Reusing the platform device kobj, sysfs entry 'enable' is
created to enable or disable EUD.
To enable the eud the following needs to be done
echo 1 > /sys/bus/platform/.../enable
To disable eud, following is the command
echo 0 > /sys/bus/platform/.../enable
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ports property for dwc3 node. This port can be used
by the Embedded USB Debugger for role switching the controller
from device to host mode and vice versa.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/7308170ce13a96c2ff9cbb22316f46c814c42ef1.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richtek RT1719 is a sink-only Type-C PD controller it complies with
latest USB Type-C and PD standards. It integrates the physical layer of
USB power delivery protocol to allow up to 100W of power.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1644421362-32104-3-git-send-email-u0084500@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
modprobe can't handle spaces in aliases. Get rid of it to fix the issue.
Link: https://lore.kernel.org/r/20220211102704.128354-1-sudeep.holla@arm.com
Fixes: aa4f886f38 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Functions won't be directly used outside of compress.c file
so mark them as static.
This will also fix warnings reported by kernel test robot:
>> sound/soc/sof/compress.c:91:5: warning: no previous prototype for
function 'sof_compr_open' [-Wmissing-prototypes]
int sof_compr_open(struct snd_soc_component *component,
^
sound/soc/sof/compress.c:91:1: note: declare 'static' if the function
is not intended to be used outside of this translation unit
int sof_compr_open(struct snd_soc_component *component,
Fixes: 6324cf901e ("SoC: SOF: compr: Add compress ops implementation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220211082631.179735-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220210204223.104181-4-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable access to the speaker protection firmware debug stream
using compress stream API and lower minimum fragment size to
16 words.
Signed-off-by: Vlad Karpovich <Vlad.Karpovich@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer firmwares will support compressed buffers that may or may not
exist, for example debugging streams. Update the driver to make a
compressed stream optional. A warning will still be generated at DSP
boot time and opening the stream will fail if the compressed buffer in
question does not exist, however the DSP can still be booted and other
features used.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Add support ip-sleep wakeup for mt8195, it's a specific revision for
each USB controller, and not following IPM rule.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220128062902.26273-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are 4 USB controllers on MT8195, each controller's wakeup control is
different, add some specific versions for them.
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220128062902.26273-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC2 USB controller on the Agilex platform does not support clock
gating, so use the chip specific "intel,socfpga-agilex-hsotg"
compatible.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220125161821.1951906-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC2 IP on the Agilex platform does not support clock-gating.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220125161821.1951906-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
