Add the compatible "intel,socfpga-agilex-hsotg" to the DWC2
implementation, because the Agilex DWC2 implementation does not support
clock gating.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220125161821.1951906-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the existing code code imposes a limit on the used memory, it might be
over pessimistic (even if this is unlikely).
Example scenario:
8 threads running in parallel, all entering
"usbfs_increase_memory_usage()" at the same time.
The atomic accesses in "usbfs_increase_memory_usage()" could be
serialized like this:
8 x "atomic64_add"
8 x "atomic64_read"
If the 8 x "atomic64_add" raise "usbfs_memory_usage" above the limit,
then all 8 calls of "usbfs_increase_memory_usage()" will return with
-ENOMEM. If you instead serialize over the whole access to
"usbfs_memory_usage" by using a spinlock, some of these calls will
succeed.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20220209123303.103340-2-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the size of the RNDIS_MSG_SET command given to us before
attempting to respond to an invalid message size.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8c67d06f3f ("usb: Link the ports to the connectors they are
attached to") creates a link to the USB Type-C connector for every new
port that is added when possible. If component_add() fails,
usb_hub_create_port_device() prints a warning but does not unregister
the device and does not return errors to the callers.
Syzbot reported a "WARNING in component_del()".
Fix this issue in usb_hub_create_port_device by calling device_unregister()
and returning the errors from component_add().
Fixes: 8c67d06f3f ("usb: Link the ports to the connectors they are attached to")
Reported-and-tested-by: syzbot+60df062e1c41940cae0f@syzkaller.appspotmail.com
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220209164500.8769-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.
Fixes: e2ca90c276 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that there is only 1 c-file left of the intel_cht_int33fe code,
move it to the intel directory instead of it having its own int33fe
sub-directory.
Note this also renames the module from intel_cht_int33fe_typec to
intel_chtwc_int33fe, to better match the names of other PMIC related
modules like the intel_chtdc_ti_pwrbtn module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-4-hdegoede@redhat.com
Move the Lenovo Yogabook YB1-X9x fuel-gauge instantiation code over to
the x86-android-tablets module, which already deals with this for various
other devices.
This removes the need to have a special intel_cht_int33fe_microb module
just for Lenovo Yogabook YB1-X9x laptops.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-3-hdegoede@redhat.com
The intel_cht_int33fe driver is intended to deal with ACPI INT33FE
firmware-nodes on Cherry Trail devices with a Whiskey Cove PMIC.
The original version of the driver only dealt with the GPD win and
GPD pocket boards where the WC PMIC is connected to a TI BQ24292i charger,
paired with a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
Later it was split into a Type-C and a Micro-B variant to deal with
the Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 boards where
the ACPI INT33FE firmware-node only describes the TI BQ27542 fuelgauge.
Currently the driver differentiates between these 2 models by counting
the number of I2cSerialBus resources in the firmware-node.
There are a number of problems with this approach:
1. The driver autoloads based on the acpi:INT33FE modalias causing it
to get loaded on almost all Bay Trail and Cherry Trail devices. It
checks for the presence of a WC PMIC, so it won't bind but the loading
still wastes time and memory.
2. Both code paths in the driver are really only designed for a single
board and have harcoded various assumptions about these boards, if
another design matching the current checks ever shows up the driver
may end up doing something completely wrong.
Avoid both issues by switching to using DMI based autoloading of
the module, which has neither of these problems.
Note this splits the previous intel_cht_int33fe kernel module into two
modules: intel_cht_int33fe_typec and intel_cht_int33fe_microb, one for
each model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-2-hdegoede@redhat.com
Minor charger / fuel-gauge improvements:
1. Make some of the names of charger / fuel-gauge related globals more
generic in preparation for also using them on other boards.
2. Update the dev_name on the Asus ME176C and TF103C to reflect that these
are using the bq24297 variant of the bq24190 family.
3. During review of the ug3105 driver the "upi,rsns-microohm" property was
renamed to "upisemi,rsns-microohm" as "upisemi" is the correct vendor
prefix, update the ug3105 properties accordingly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-1-hdegoede@redhat.com
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-6-hdegoede@redhat.com
The Asus ME176C + TF103C both have a lid-switch (for a cover in the ME176C
case), add a gpio-keys platform-device and platform-data describing the
lid-switch on both.
Note the "intel-int3496" in the asus_me176c_tf103c_pdevs[] array is not
new / not a change. This was already present in the generic int3496_pdevs[]
array, to which pdev_info pointed before. The int3496_pdevs[] array
contains just this entry for boards which only need that single pdev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-4-hdegoede@redhat.com
Factor the code to go from a gpiochip label + pin-numer to a gpio_desc
out of x86_acpi_irq_helper_get() and make it into a new
x86_android_tablet_get_gpiod() helper, as this will be necessary in some
x86_dev_info.init() functions too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-3-hdegoede@redhat.com
Add properties describing the battery on the Asus ME176C / TF103C
tablets. The max constant charge volt / current settings were taken
from the factory Android image on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-2-hdegoede@redhat.com
power_supply_get_battery_info() which is used by charger and fuel-gauge
drivers on x86-android-tablets, expects the battery properties to be
described in a stand-alone battery fwnode which is then referenced
from both the charger and fuel-gauge device's fwnodes.
Add support for registering + unregistering a swnode for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-1-hdegoede@redhat.com
The ARM version of the accelerated XOR routines are simply the 8-way C
routines passed through the auto-vectorizer with SIMD codegen enabled.
This used to require GCC version 4.6 at least, but given that 5.1 is now
the baseline, this check is no longer necessary, and actually
misidentifies Clang as GCC < 4.6 as Clang defines the GCC major/minor as
well, but makes no attempt at doing this in a way that conveys feature
parity with a certain version of GCC (which would not be a great idea in
the first place).
So let's drop the version check, and make the auto-vectorize pragma
(which is based on a GCC-specific command line option) GCC-only. Since
Clang performs SIMD auto-vectorization by default at -O2, no pragma is
necessary here.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/496
Link: https://github.com/ClangBuiltLinux/linux/issues/503
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modern compilers are perfectly capable of extracting parallelism from
the XOR routines, provided that the prototypes reflect the nature of the
input accurately, in particular, the fact that the input vectors are
expected not to overlap. This is not documented explicitly, but is
implied by the interchangeability of the various C routines, some of
which use temporary variables while others don't: this means that these
routines only behave identically for non-overlapping inputs.
So let's decorate these input vectors with the __restrict modifier,
which informs the compiler that there is no overlap. While at it, make
the input-only vectors pointer-to-const as well.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/563
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the TDES IP found on sama7g5.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Helge Deller <deller@gmx.de>
128b/132b supports using 64 slots starting from 0, while 8b/10b reserves
slot 0 for metadata.
Commit d6c6a76f80 ("drm: Update MST First Link Slot Information Based
on Encoding Format") added support for updating the topology state
accordingly, and commit 41724ea273 ("drm/amd/display: Add DP 2.0 MST
DM Support") started using it in the amd driver.
This feels more than a little cumbersome, especially updating the
information in atomic check. For i915, add the update to MST connector
.compute_config hook rather than iterating over all MST managers and
connectors in global mode config .atomic_check. Fingers crossed.
v3:
- Propagate errors from intel_dp_mst_update_slots() (Ville)
v2:
- Update in .compute_config() not .atomic_check (Ville)
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220208152317.3019070-1-jani.nikula@intel.com
The DP 2.0 errata completely overhauls the 128b/132b link training, with
no provisions for backward compatibility with the original DP 2.0
specification.
The changes are too intrusive to consider reusing the same code for both
8b/10b and 128b/132b, mainly because the LTTPR channel equalisation is
done concurrently instead of serialized.
NOTES:
* It's a bit unclear when to wait for DP_INTERLANE_ALIGN_DONE and
per-lane DP_LANE_SYMBOL_LOCKED. Figure xx4 in the SCR implies the
LANEx_CHANNEL_EQ_DONE sequence may end with either 0x77,0x77,0x85 *or*
0x33,0x33,0x84 (for four lane configuration in DPCD 0x202..0x204)
i.e. without the above bits set. Text elsewhere seems contradictory or
incomplete.
* We read entire link status (6 bytes) everywhere instead of individual
DPCD addresses.
* There are some subtle ambiguities or contradictions in the order of
some DPCD access and TPS signal enables/disables. It's also not clear
whether these are significant.
v4:
- Wait for intra-hop clear after link training end (Ville)
- Wait instead of single check for intra-hop clear before link train
v3:
- Use msecs_to_jiffies_timeout() (Ville)
- Read status at the beginning of interlane align done loop (Ville)
- Try to simplify timeout flag use where possible (Ville)
v2:
- Always try one last time after timeouts to avoid races (Ville)
- Extend timeout to cover the entire LANEx_EQ_DONE sequence (Ville)
- Also check for eq interlane align done in LANEx_CDS_DONE Sequence (Ville)
- Check for Intra-hop status before link training
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220208143209.2997337-1-jani.nikula@intel.com
The DP 2.0 errata redefines link training. There are some new status
bits, and some of the old ones need to be checked independently. Add
helpers to do this.
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/5a46260d1f171fed46d0ab8fe4b6499abd65ce24.1643878928.git.jani.nikula@intel.com
The DP 2.0 errata changes DP_128B132B_TRAINING_AUX_RD_INTERVAL (DPCD
0x2216) completely. Add a new function to read that. Follow-up will need
to clean up existing functions.
v2: fix reversed interpretation of bit 7 meaning (Uma)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/22f6637194c9edb22b6a84be82dd385550dbb958.1643878928.git.jani.nikula@intel.com
FIPS 140 requires a minimum security strength of 112 bits. This implies
that the HMAC key must not be smaller than 112 in FIPS mode.
This restriction implies that the test vectors for HMAC that have a key
that is smaller than 112 bits must be disabled when FIPS support is
compiled.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By adding the support for the flag fips_skip, hash / HMAC test vectors
may be marked to be not applicable in FIPS mode. Such vectors are
silently skipped in FIPS mode.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Claudio has volunteered to be more involved in the maintainership of
s390 KVM.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220210085310.26388-1-borntraeger@linux.ibm.com
We lost the required >>16 when I refactored the FBC plane state
checks. Bring it back so the check does what it's supposed to.
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: 2e6c99f886 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210103107.24492-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Enable various drivers which support peripherals as found on the
Verdin iMX8M Mini et al. computer/system on modules:
- CONFIG_CAN_MCP251XFD
At least one Microchip MCP2518FDT SPI CAN controller which this driver
also supports may be found on the Verdin iMX8M Mini computer/system on
module.
- CONFIG_BT_HCIUART_MRVL, CONFIG_BT_MRVL, CONFIG_BT_MRVL_SDIO and
CONFIG_MWIFIEX_SDIO
The AzureWave AW-CM276NF which these Bluetooth and Wi-Fi drivers also
support may be found on the Verdin iMX8M Mini (as well as the Apalis
iMX8, Colibri iMX8X and Verdin iMX8M Plus for that matter) computer/
system on module.
- CONFIG_SENSORS_LM75
The TI TMP75C temperature sensor which this driver also supports may be
found on the Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for
that matter) computer/system on module.
- CONFIG_SND_SOC_NAU8822
The Nuvoton Technology Corporation (NTC) NAU88C22YG which this driver
also supports may be found on the Verdin Development Board a carrier
board for the Verdin family of computer/system on module which the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
may be mated in.
- CONFIG_TI_ADS1015
The TLA2024 ADC which this driver also supports may be found on the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
computer/system on module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build Realtek Gigabit Ethernet driver as a module.
Network cards based on chipsets this driver supports are ubiquitous both
in regular PCIe as well as mini-PCIe and nowadays even various M.2
formats. It is therefore a suitable card to be used for any kind of PCIe
and/or Gigabit Ethernet testing. As it is not designed in, just enabling
it as a module seems most suitable.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This avoids the following systemd warning:
[ 2.618538] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 2.630916] systemd[1]: (This warning is only shown for the first
unit using IP firewalling.)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make defconfig; make savedefconfig" to rebuild defconfig.
This dropped the following configuration options which are nowaday's
already enabled (resp. disabled) by default:
CONFIG_MEMCG_SWAP=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_FSL_MC_BUS=y
CONFIG_QCOM_SCM=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_XHCI_PCI=m
CONFIG_SDM_GCC_845=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_POWER_AVS was renamed to POWER_AVS_OMAP in commit bca815d620
("PM: AVS: smartreflex Move driver to soc specific drivers"). As there
are no 64-bit Arm OMAPs it getting dropped seems fair.
Note that the following user-selectable configuration options have been
preserved:
CONFIG_SECCOMP=y
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_CONFIGFS_FS=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_PCIEAER which is required for CONFIG_ACPI_APEI_PCIEAER.
Commit 8c8ff55b4d ("PCI/AER: Don't select CONFIG_PCIEAER by default")
changed it to no longer being enabled by default.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_TASKSTATS which is required for CONFIG_TASK_XACCT (and
subsequently CONFIG_TASK_IO_ACCOUNTING). Previously, taskstats got
pulled in by KVM but that got changed in commit 63b3f96e1a
("kvm: Select SCHED_INFO instead of TASK_DELAY_ACCT").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I'd like to continue maintaining the work that was done around idmapped,
make sure that I'm Cced on new patches and work that impacts the
infrastructure.
Link: https://lore.kernel.org/r/20220203131411.3093040-3-brauner@kernel.org
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The test treated zero as a successful run when it really should treat
non-zero as a successful run. A mount's idmapping can't change once it
has been attached to the filesystem.
Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org
Fixes: 01eadc8dd9 ("tests: add mount_setattr() selftests")
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Opregion Mailbox #2 is obsolete for SWSCI usage in opregion v2.x, and
repurposed in opregion v3.x. Warn about obsole mailbox presence in v2.x,
and ignore with an error for v3.x.
v2: Demote drm_warn() to drm_dbg() on opregion v2.x
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210161603.647254-1-jani.nikula@intel.com
The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.
Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.
Fixes: 9c4b0a6831 ("drm/i915: add opregion function to notify bios of encoder enable/disable")
Cc: <stable@vger.kernel.org> # v3.13+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com
