This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 33c563ad28 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Conntrack sets on CHECKSUM_UNNECESSARY for UDP packet with no checksum,
from Kevin Mitchell.
2) skb->priority support for nfqueue, from Nicolas Dichtel.
3) Remove conntrack extension register API, from Florian Westphal.
4) Move nat destroy hook to nf_nat_hook instead, to remove
nf_ct_ext_destroy(), also from Florian.
5) Wrap pptp conntrack NAT hooks into single structure, from Florian Westphal.
6) Support for tcp option set to noop for nf_tables, also from Florian.
7) Do not run x_tables comment match from packet path in nf_tables,
from Florian Westphal.
8) Replace spinlock by cmpxchg() loop to update missed ct event,
from Florian Westphal.
9) Wrap cttimeout hooks into single structure, from Florian.
10) Add fast nft_cmp expression for up to 16-bytes.
11) Use cb->ctx to store context in ctnetlink dump, instead of using
cb->args[], from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: ctnetlink: use dump structure instead of raw args
nfqueue: enable to set skb->priority
netfilter: nft_cmp: optimize comparison for 16-bytes
netfilter: cttimeout: use option structure
netfilter: ecache: don't use nf_conn spinlock
netfilter: nft_compat: suppress comment match
netfilter: exthdr: add support for tcp option removal
netfilter: conntrack: pptp: use single option structure
netfilter: conntrack: remove extension register api
netfilter: conntrack: handle ->destroy hook via nat_ops instead
netfilter: conntrack: move extension sizes into core
netfilter: conntrack: make all extensions 8-byte alignned
netfilter: nfqueue: enable to get skb->priority
netfilter: conntrack: mark UDP zero checksum as CHECKSUM_UNNECESSARY
====================
Link: https://lore.kernel.org/r/20220209133616.165104-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit
9652dc2eb9 ("tcp: relax listening_hash operations")
removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket:🔒
local_bh_disable() + spin_lock(&ilb->lock):
inet_listen()
inet_csk_listen_start()
sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
spin_lock(&ilb->lock);
acquire(&ilb->lock);
Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
tcp_seq_next()
listening_get_next()
spin_lock(&ilb2->lock);
acquire(&ilb2->lock);
tcp4_seq_show()
get_tcp4_sock()
sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
acquire(softirq_ctrl) // <---- whoops
acquire(&sk->sk_callback_lock)
Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CPUfreq governors request CPU frequencies using information
on current CPU usage. The CPPC driver converts them to
performance requests. Frequency targets are computed as:
target_freq = (util / cpu_capacity) * max_freq
target_freq is then clamped between [policy->min, policy->max].
The CPPC driver converts performance values to frequencies
(and vice-versa) using cppc_cpufreq_perf_to_khz() and
cppc_cpufreq_khz_to_perf(). These functions both use two different
factors depending on the range of the input value. For
cppc_cpufreq_khz_to_perf():
- (NOMINAL_PERF / NOMINAL_FREQ) or
- (LOWEST_PERF / LOWEST_FREQ)
and for cppc_cpufreq_perf_to_khz():
- (NOMINAL_FREQ / NOMINAL_PERF) or
- ((NOMINAL_PERF - LOWEST_FREQ) / (NOMINAL_PERF - LOWEST_PERF))
This means:
1- the functions are not inverse for some values:
(perf_to_khz(khz_to_perf(x)) != x)
2- cppc_cpufreq_perf_to_khz(LOWEST_PERF) can sometimes give
a different value from LOWEST_FREQ due to integer approximation
3- it is implied that performance and frequency are proportional
(NOMINAL_FREQ / NOMINAL_PERF) == (LOWEST_PERF / LOWEST_FREQ)
This patch changes the conversion functions to an affine function.
This fixes the 3 points above.
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In commit 02b9984d64, we pushed a sync_filesystem() call from the VFS
into xfs_fs_remount. The only time that we ever need to push dirty file
data or metadata to disk for a remount is if we're remounting the
filesystem read only, so this really could be moved to xfs_remount_ro.
Once we've moved the call site, actually check the return value from
sync_filesystem.
Fixes: 02b9984d64 ("fs: push sync_filesystem() down to the file system's remount_fs()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Fixes dtbs_check warnings like:
'3-3-v-regulator' does not match any of the regexes: '.*-names$'
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>:wq
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fixes dtbs_check warnings like:
'3-3-v-regulator' does not match any of the regexes: '.*-names$'
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: fix compile error
Fixes dtbs_check warnings like:
pdma@ffda0000: $nodename:0: 'pdma@ffda0000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fixes dtbs_check warnings like:
pdma@ffda0000: $nodename:0: 'pdma@ffda0000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the commit c504e5c2f9 ("net: skb: introduce kfree_skb_reason()")
drop reason is introduced to the tracepoint of kfree_skb. Therefore,
drop_monitor is able to report the drop reason to users by netlink.
The drop reasons are reported as string to users, which is exactly
the same as what we do when reporting it to ftrace.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220209060838.55513-1-imagedong@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiko does not work at Theobroma Systems anymore and the boards using
those panels are downstream, maintained internally by the company, so
let's relieve Heiko of maintainership duties.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131165439.717713-1-quentin.schulz@theobroma-systems.com
PDF-generation improvements from Akira Yokasawa; Akira says:
This patch set improves conversions of DOT -> PDF and SVG -> PDF
for PDF docs.
* DOT -> PDF conversion
Current scheme uses "dot -Tpdf" (of graphviz).
Cons:
- openSUSE's dot(1) does not support -Tpdf.
- Other distro's dot(1) generates PDFs with unnecessarily wide
margins for inclusion into LaTeX docs.
Patch 1/4 changes the route to the following two steps:
1. DOT -> SVG by "dot -Tsvg"
2. SVG -> PDF by "rsvg-convert -f pdf" with fallback to convert(1)
Pros:
- Improved portability across distros
- Less space around graphs in final PDF documents
Con:
- On systems without rsvg-convert, generated PDF will be of raster
image.
Patch 2/4 avoids raster-image PDF by using "dot -Tpdf" on systems where
the option is available.
* SVG -> PDF conversion
Current scheme uses convert(1) (of ImageMagick)
Cons:
- Generated PDFs are of raster image. Some of them look blurry.
- Raster images tend to be large in size.
- convert(1) delegates SVG decoding to rsvg-convert(1).
It doesn't cover full range of Inkscape-specific SVG features
and fails to convert some of SVG figures properly.
Improper conversions are observed with SVGs listed below (incomplete,
conversion quality depends on the version of rsvg-convert):
- Documentation/userspace-api/media/v4l/selection.svg
- Documentation/userspace-api/media/v4l/vbi_525.svg
- Documentation/userspace-api/media/v4l/vbi_625.svg
- Documentation/userspace-api/media/v4l/vbi_hsync.svg
- Documentation/admin-guide/blockdev/drbd/DRBD-8.3-data-packets.svg
- Documentation/admin-guide/blockdev/drbd/DRBD-data-packages.svg
If you have Inkscape installed as well, convert(1) delegates SVG
decoding to inkscape(1) rather than to rsvg-convert(1) and SVGs listed
above can be rendered properly.
So if Inkscape is required for converting those SVGs properly, why not
use it directly in the first place?
Patches 3/4 and 4/4 add code to utilize inkscape(1) for SVG -> PDF
conversion when it is available. They don't modify any existing
requirements for kernel-doc.
Patch 3/4 adds the alternative route of SVG -> PDF conversion by
inkscape(1).
Patch 4/4 delegates warning messages from inkscape(1) to kernellog.verbose
as they are likely harmless in command-line uses.
Pros:
- Generated PDFs are of vector graphics.
- Vector graphics tends to be smaller in size and looks nicer when
zoomed in.
- SVGs drawn by Inkscape are fully supported.
On systems without Inkscape, no regression is expected by these two
patches.
Mute the warning from "make dtbs_check":
Documentation/devicetree/bindings/net/can/bosch,m_can.example.dt.yaml:
can@20e8000: bosch,mram-cfg: [[0, 0, 0, 32, 0, 0, 0, 1]] is too short
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220128133142.2135718-1-dinguyen@kernel.org
The file is not closed when ferror() fails.
Fixes: 00d674cb35 ("kconfig: refactor conf_write_dep()")
Fixes: 57ddd07c45 ("kconfig: refactor conf_write_autoconf()")
Reported-by: Ryan Cai <ycaibb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Depending on its version, distro config, and system-setup type,
inkscape(1) emits various warning messages which are harmless in
command-line uses.
List of such warning messages (incomplete, long ones wrapped):
- Gtk-Message: hh:mm:ss.nnn: Failed to load module "canberra-gtk-module"
- Unable to init server: Could not connect: Connection refused
- Failed to get connection
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_new_for_name:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_call:
assertion 'DBUS_IS_G_PROXY (proxy)' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_connection_register_g_object:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): WARNING **: hh:mm:ss.nnn:
Fonts dir '/usr/share/inkscape/fonts' does not exist and will be ignored.
To avoid unnecessary anxiety, capture the message and output it via
kernellog.verbose or kernellog.warn depending on the exit code.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/e26a7b53-9155-8394-4a31-6006379b65a5@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Using convert(1) of ImageMagick for SVG -> PDF conversion results in
PDFs containing raster (bitmap) images which sometimes look blurry.
Ideally speaking, SVG to PDF conversion should retain vector graphics
in SVG.
rsvg-convert(1) can do such conversions with regard to SVG files
generated by dot(1).
Unfortunately, rsvg-convert(1) does not cover some of SVG features
specific to Inkscape.
inkscape(1) of Inkscape naturally covers such SVG features.
So add a route in svg2pdf() so that inkscape(1) is used when it is
available.
Note:
After this change, if you have Inkscape installed, ImageMagick nor
librsvg are not required.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/3eea2a8d-c52d-ee07-cf7b-83784c6f6e4b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
To prevent any regression on existing build systems, limit the
fallback of converting DOT -> raster PDF only when both of the
following conditions are met.
o dot(1) doesn't support -Tpdf
o rsvg-convert(1) is not found
While we are here, add kernellog.verbose messages related to
rsvg-convert, 'dot -Tpdf', and 'dot -Tsvg' commands.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e76f61e1-7366-ba00-b119-8ea6a2499861@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On openSUSE, dot(1) command does not support direct PDF output.
On other distros, generated PDF images have unnecessarily wide margins,
especially for small graphs.
By using dot(1) for DOT -> SVG, then rsvg-convert(1) for SVG -> PDF,
more optimal PDF images can be obtained, with the bonus of improved
portability across various distros.
Add rules in kfigure.py so that the above mentioned route is taken
when rsvg-convert(1) is available.
Note that rsvg-convert(1) is recommended by sphinx_pre_install.
So it is most likely that existing systems for building pdfdocs have
rsvg-convert(1) installed.
Note:
SVG features supported by rsvg-convert(1) vary depending on its
version and distro config.
For example, the one found on Ubuntu Bionic (version 2.40.20) does
poor job in rendering some of SVG files drawn by Inkscape.
SVG files generated by dot(1) are converted nicely even with such
old versions of rsvg-convert.
So this change does not affect the quality of such figures in any
way.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/15b56dd3-081a-2469-c3a4-dfc1ca4c6c2d@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Convert the S3C/S5P/Exynos FIMD bindings to DT schema format.
The conversion includes also updates to the bindings, matching the
current DTS and Linux driver: adding optional iommus and power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220208171823.226211-11-krzysztof.kozlowski@canonical.com
Convert the Exynos5433 MIC bindings to DT schema format.
The conversion includes also updates to the bindings, matching the
current DTS and Linux driver: adding optional power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220208171823.226211-10-krzysztof.kozlowski@canonical.com
Convert the Exynos HDMI bindings to DT schema format.
The conversion includes also updates to the bindings, matching the
current DTS and Linux driver:
1. Add required properties: VDD supplies, power-domains.
2. Add optional properties: HDMI-EN supply, ports.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220208171823.226211-9-krzysztof.kozlowski@canonical.com
Convert the Exynos Mixer bindings to DT schema format.
The conversion includes also updates to the bindings, matching the
current DTS and Linux driver:
1. Add clocks required on Exynos4210 and Exynos4212 types of Mixer.
2. Add second memory range on Exynos4210 and Exynos4212.
3. Add interconnects, iommus and power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220208171823.226211-8-krzysztof.kozlowski@canonical.com
Convert the Exynos5433 DECON display controller bindings to DT schema
format.
The conversion includes also updates to the bindings, matching the
current DTS and Linux driver:
1. Require "fifo" interrupt.
2. Add "dsd" as a last clock.
3. Document "power-domains" and "iommus" properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220208171823.226211-5-krzysztof.kozlowski@canonical.com
In order to prepare for fixing lots of devicetree unique_unit_address
warnings for the TI clock nodes, let's add a binding for the TI clksel
clocks. This allows us to move the overlapping reg properties for the
component clocks to be children of the related clksel nodes. And with
that we need the reg property only for the parent clksel node making
the reg property unique like it should be.
We want to set #clock-cells = <2> in case we ever start parsing ranges
of clkcsel instances directly using a clksel driver rather than using the
existing component clock drivers and child nodes.
And before the devicetree files can be updated, we need to update the
TI clock drivers to get the IO address from the parent clksel node.
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220203073929.59296-1-tony@atomide.com
"adev->gfx.rlc.rlcg_reg_access_supported = true;"
the above varible were set too late during driver initialization.
it will cause the driver to fail to write/read register during GMC hw init
in sriov mode.
move gfx_xxx_init_rlcg_reg_access_ctrl() function to gfx early init stage
to avoid this issue.
Fixes: 5d447e2967 ("drm/amdgpu: add helper for rlcg indirect reg access")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only vangogh has 2 types of hwmon power node: "fastPPT" and "slowPPT",
the other asic only has 1 type of hwmon power node: "PPT".
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After the buffer object is successfully mapped,
call amdgpu_bo_kunmap before the function returns.
Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After the buffer object is successfully mapped,
call radeon_bo_kunmap before the function returns.
Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few MQD manager functions are duplicated for all versions of
MQD manager. Remove this duplication by moving the common
functions into kfd_mqd_manager.c file.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup the kfd code by removing the unused old debugger
implementation.
The address watch was only ever implemented in the upstream
driver for GFXv7 (Kaveri). The user mode tools runtime using
this API was never open-sourced. Work on the old debugger
prototype that used this API has been discontinued years ago.
Only a small piece of resetting wavefronts is kept and
is moved to kfd_device_queue_manager.c.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With no HWS, TLB flushing will not work in SVM code.
Fix this by calling kfd_flush_tlb() which works for both
HWS and no HWS case.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it will cause hwmon node of power1_label is not created.
v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".
Fixes: ae07970a06 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PPT limit cannot be queried from VF
Fixes: f3527a6483 ("drm/amd/pm: Enable sysfs required by rocm-smi tool for One VF mode")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use CRST_ALLOC_ORDER to make it more obvious what the order means,
and also to be consistent with other code, e.g. the vmemmap code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a confusion with regard to the source address of
memcpy_real() and calling functions. While the declared
type for a source assumes a virtual address, in fact it
always called with physical address of the source.
This confusion led to bugs in copy_oldmem_kernel() and
copy_oldmem_user() functions, where __pa() macro applied
mistakenly to physical addresses. It does not lead to a
real issue, since virtual and physical addresses are
currently the same.
Fix both the bugs and memcpy_real() prototype by making
type of source address consistent to the function name
and the way it actually used.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Virtual addresses of vmcore_info and os_info members are
wrongly passed to copy_oldmem_kernel(), while the function
expects physical address of the source. Instead, __pa()
macro should have been applied.
Yet, use of __pa() macro could be somehow confusing, since
copy_oldmem_kernel() may treat the source as an offset, not
as a direct physical address (that depens from the oldmem
availability and location).
Fix the virtual vs physical address confusion and make the
way the old lowcore is read consistent across all sources.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call.
Fixes: 32ef938815 ("s390/cio: Add support for FCES status notification")
Cc: stable@vger.kernel.org
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Converts net/cortina,gemini-ethernet.txt to yaml
This permits to detect some missing properties like interrupts
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220201144940.2488782-1-clabbe@baylibre.com
As reported by Jeff, dereferencing the openat2 syscall argument in
audit_match_perm() to obtain the open_how::flags can result in an
oops/page-fault. This patch fixes this by using the open_how struct
that we store in the audit_context with audit_openat2_how().
Independent of this patch, Richard Guy Briggs posted a similar patch
to the audit mailing list roughly 40 minutes after this patch was
posted.
Cc: stable@vger.kernel.org
Fixes: 1c30e3af8a ("audit: add support for the openat2 syscall")
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
it will cause hwmon node of power1_label is not created.
v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".
Fixes: ae07970a06 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will
be cleared to 0 at S3 resume.
[How]
Keep eDP Vdd on when eDP stream is already enabled.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
