mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,089,026 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thomas Zimmermann
|
2a81dba4b5 |
fbdev: Fix cfb_imageblit() for arbitrary image widths
Commit |
||
|
Thomas Zimmermann
|
40faaf80c4 |
fbdev: Fix sys_imageblit() for arbitrary image widths
Commit |
||
Dave Airlie
|
c73c3576a2 |
drm-misc-next-fixes for v5.18-rc1:
- Make audio and color plane support checking only happen when a CEA extension block is found. - Fix a small regression from ttm_resource_fini() - Small selftest fix. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmI8b2sACgkQ/lWMcqZw E8OFKg//X58T7X70BHLaJxD0vP79TFsS2P6McQLsnHGCQUbh44Rl1HQV3ofFjZ9y dgYr2XZFSs8l5s/sIjvLc/sKW23i9hKX5CmGfmCS0+VtSGvA+BvWM+otWNfceymD Iyqh6IviNxgXjZoTT03XMh4hV2aJqKkq4jclKhfwhVX4MQrbzvRVIpebNTmdhx78 as0bd9HHXLXKiDiY7k4OxZX9wyVGqu+BCcDjSvw95atN9BndC4aJkBfYa/N5js3d fiVs0YWJnELwgSC8WLDgqaOZajtd2MtiQ+pOlazHJ8Wtw552NPzgnIaJgr6Qbfb3 VP87EFSIWuq6vL5APXosaSCoCI3UFIlkPADGyoKIjvGXcYXZk6OYy74JvwwgVg/j XY3ygNLBI3LAxF7JYH3IfbB8MvjYhORDmnVgT4yuKEOY+cgJh+2gVb7a2SDu6m2r iwarH+UyGOACf0ESbyCDehmeEbfwO+v6ICHcyMhHxZb0CA7FvRWF81UBKdsdn4dh 8RpJxF4egie3Dn3z3fFu172FwUn/hwxTsCfl8+ikMrH+qEoiPyNEJC2jUWlVVc6U h00GR4889YZHG5o2WiiKIhAPhViuOzGrsaQRyytuFCjwhzTtpGRylqSGNYLjZc7W QUCvRCvr31jwJ7jP5Crf5gqJeKOMaNzV+5UDAUAUqLedT+zY0L0= =CZpl -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-fixes-2022-03-24-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v5.18-rc1: - Make audio and color plane support checking only happen when a CEA extension block is found. - Fix a small regression from ttm_resource_fini() - Small selftest fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fafe7517-fb98-4992-e059-88429ac488bc@linux.intel.com |
||
|
Dave Airlie
|
21050a39a3 |
Merge tag 'drm-intel-next-fixes-2022-03-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Reject unsupported TMDS rates on ICL+ (Ville Syrjälä) - Treat SAGV block time 0 as SAGV disabled (Ville Syrjälä) - Fix PSF GV point mask when SAGV is not possible (Ville Syrjälä) - Fix renamed INTEL_INFO->media.arch/ver field (Lucas De Marchi) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YjwvgGzYNAX5rxHN@tursulin-mobl2 |
||
Linus Torvalds
|
b14ffae378 |
drm for 5.18-rc1
dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmI71h4ACgkQDHTzWXnE hr6wKg//SvKFiEOhptua8Ao8XYkhXpg1/tgdAs4D7bZ0YgJyF4Im0RuFOKMmF3mN 0Y8AwguqrsmrOAFbK8B1WEysB66DmGlZN/V2Q75X7fui8xs4uGF2Fcxyr+265zhf vONPwAoxYr+KXqwOI1p1BP2QEL6bJTdu+nrXRsXIBIrWnw8ehXJlw3fDhgvG5QBn RPdbU7lQnd47hdYxkbe5SiZvWnPC46dJmpqsRJir0xjskR6juU36f34C4IKhTGwO NDPeWVgusVXtIC/F4X6RebCWG0f66h+CUFa9zeYIleI/2/5yZWXfcw6Obx8HgPkt gieiI0R4TpkVxeHCApCQ5UpxWgfSOXdoDoyw172bKQw7JCHVEkSwenyMEEwNet6r SCJrRmlB1PBI/iTWmhm9qgrU46ZZyAnQoTlCsXGzJncdP3hzGlA1embl00yfEl7f wzM35N20qd5T4VKUEF8QYF0fLZYmKw4cWVASu4hQ3qmGal6frilphz2J8JK8hQNq KhFqNbVTnZsQNr9LBCbrf0kOPaMzpmW+2vQG9ApdAb1N3gNPZT7ctti0Xq5N2OUR AipWFAsDPS2NPADKmBtDU55PgFH9MqUIsoHHXLV4Qi76dvCqYoN68qRQxrL7rpSu b0gr0YKU2QcIB/uytjOPHcgtI5Xvrh+q8JPz/dJ38/Esgjmk4wo= =uRsT -----END PGP SIGNATURE----- Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ... |
||
Jens Axboe
|
34d2bfe7d4 |
io_uring: improve task work cache utilization
While profiling task_work intensive workloads, I noticed that most of the time in tctx_task_work() is spending stalled on loading 'req'. This is one of the unfortunate side effects of using linked lists, particularly when they end up being passe around. Prefetch the next request, if there is one. There's a sufficient amount of work in between that this makes it available for the next loop. While fiddling with the cache layout, move the link outside of the hot completion cacheline. It's rarely used in hot workloads, so better to bring in kbuf which is used for networked loads with provided buffers. This reduces tctx_task_work() overhead from ~3% to 1-1.5% in my testing. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Kees Cook
|
ef3e787c21 |
usercopy: Disable CONFIG_HARDENED_USERCOPY_PAGESPAN
CONFIG_HARDENED_USERCOPY_PAGESPAN has been mostly broken for a while, and it has become hard to ignore with some recent scsi changes[1]. While there is a more complete series to replace it with better checks[2], it should have more soak time in -next. Instead, disable the config now, with the expectation that it will be fully replaced in the next kernel release. [1] https://lore.kernel.org/lkml/20220324064846.GA12961@lst.de/ [2] https://lore.kernel.org/linux-hardening/20220110231530.665970-1-willy@infradead.org/ Suggested-by: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> |
||
Andreas Gruenbacher
|
3bde4c4858 |
gfs2: Make sure not to return short direct writes
When direct writes fail with -ENOTBLK because we're writing into a hole (gfs2_iomap_begin()) or because of a page invalidation failure (iomap_dio_rw()), we're falling back to buffered writes. In that case, when we lose the inode glock in gfs2_file_buffered_write(), we want to re-acquire it instead of returning a short write. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> |
||
|
Andreas Gruenbacher
|
11661835f9 |
gfs2: Remove dead code in gfs2_file_read_iter
Function iomap_dio_rw() only returns -ENOTBLK for write requests and
gfs2_file_direct_read() no longer returns -ENOTBLK since commit
|
||
|
Andreas Gruenbacher
|
46f3e0421c |
gfs2: Fix gfs2_file_buffered_write endless loop workaround
Since commit |
||
Dmitry Baryshkov
|
168a0abf05 |
pinctrl: qcom-pmic-gpio: Add support for pm8450
PM8450 provides 4 GPIOs. Add a compatible entry for this GPIO block. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220315091106.613153-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Joel Stanley
|
6ed23c312a |
dt-bindings: pinctrl: aspeed: Update gfx node in example
The example needs updating to match the to be added yaml bindings for the gfx node. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220304000311.970267-2-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Dylan Yudaken
|
a73825ba70 |
io_uring: fix async accept on O_NONBLOCK sockets
Do not set REQ_F_NOWAIT if the socket is non blocking. When enabled this causes the accept to immediately post a CQE with EAGAIN, which means you cannot perform an accept SQE on a NONBLOCK socket asynchronously. By removing the flag if there is no pending accept then poll is armed as usual and when a connection comes in the CQE is posted. Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220324143435.2875844-1-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
52deda9551 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ... |
||
Arnaldo Carvalho de Melo
|
d16d30f48c |
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from: |
||
|
Arnaldo Carvalho de Melo
|
1efe4cbd7a |
tools headers cpufeatures: Sync with the kernel sources
To pick the changes in:
|
||
Thomas Richter
|
d0a0a51149 |
perf stat: Fix forked applications enablement of counters
I have run into the following issue:
# perf stat -a -e new_pmu/INSTRUCTION_7/ -- mytest -c1 7
Performance counter stats for 'system wide':
0 new_pmu/INSTRUCTION_7/
0.000366428 seconds time elapsed
#
The new PMU for s390 counts the execution of certain CPU instructions.
The root cause is the extremely small run time of the mytest program. It
just executes some assembly instructions and then exits.
In above invocation the instruction is executed exactly one time (-c1
option). The PMU is expected to report this one time execution by a
counter value of one, but fails to do so in some cases, not all.
Debugging reveals the invocation of the child process is done
*before* the counter events are installed and enabled.
Tracing reveals that sometimes the child process starts and exits before
the event is installed on all CPUs. The more CPUs the machine has, the
more often this miscount happens.
Fix this by reversing the start of the work load after the events have
been installed on the specified CPUs. Now the comment also matches the
code.
Output after:
# perf stat -a -e new_pmu/INSTRUCTION_7/ -- mytest -c1 7
Performance counter stats for 'system wide':
1 new_pmu/INSTRUCTION_7/
0.000366428 seconds time elapsed
#
Now the correct result is reported rock solid all the time regardless
how many CPUs are online.
Reviewers notes:
Jiri:
Right, without -a the event has enable_on_exec so the race does not
matter, but it's a problem for system wide with fork.
Namhyung:
Agreed. Also we may move the enable_counters() and the clock code out of
the if block to be shared with the else block.
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
61726144c9 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
|
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
|
Linus Torvalds
|
7403e6d826 |
VFIO updates for v5.18-rc1
- Introduce new device migration uAPI and implement device specific
mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe,
Yishai Hadas, Leon Romanovsky)
- New HiSilicon acc vfio-pci variant driver, also supporting migration
interface (Shameer Kolothum, Longfang Liu)
- D3hot fixes for vfio-pci-core (Abhishek Sahu)
- Document new vfio-pci variant driver acceptance criteria
(Alex Williamson)
- Fix UML build unresolved ioport_{un}map() functions
(Alex Williamson)
- Fix MAINTAINERS due to header movement (Lukas Bulwahn)
-----BEGIN PGP SIGNATURE-----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=Sv96
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Introduce new device migration uAPI and implement device specific
mlx5 vfio-pci variant driver supporting new protocol (Jason
Gunthorpe, Yishai Hadas, Leon Romanovsky)
- New HiSilicon acc vfio-pci variant driver, also supporting migration
interface (Shameer Kolothum, Longfang Liu)
- D3hot fixes for vfio-pci-core (Abhishek Sahu)
- Document new vfio-pci variant driver acceptance criteria
(Alex Williamson)
- Fix UML build unresolved ioport_{un}map() functions
(Alex Williamson)
- Fix MAINTAINERS due to header movement (Lukas Bulwahn)
* tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits)
vfio-pci: Provide reviewers and acceptance criteria for variant drivers
MAINTAINERS: adjust entry for header movement in hisilicon qm driver
hisi_acc_vfio_pci: Use its own PCI reset_done error handler
hisi_acc_vfio_pci: Add support for VFIO live migration
crypto: hisilicon/qm: Set the VF QM state register
hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver
hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region
hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices
hisi_acc_qm: Move VF PCI device IDs to common header
crypto: hisilicon/qm: Move few definitions to common header
crypto: hisilicon/qm: Move the QM header to include/linux
vfio/mlx5: Fix to not use 0 as NULL pointer
PCI/IOV: Fix wrong kernel-doc identifier
vfio/mlx5: Use its own PCI reset_done error handler
vfio/pci: Expose vfio_pci_core_aer_err_detected()
vfio/mlx5: Implement vfio_pci driver for mlx5 devices
vfio/mlx5: Expose migration commands over mlx5 device
vfio: Remove migration protocol v1 documentation
vfio: Extend the device migration protocol with RUNNING_P2P
vfio: Define device migration protocol v2
...
|
||
|
Linus Torvalds
|
66711cfea6 |
hyperv-next for 5.18
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmI6MhgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXiBkB/9FEaebcytvBMNVnz/fprfQWfYxdrUB wmDB9dnJVPX6UcWg6DuDv7KqatimDp7JrnKrNsrqlgF6Wafn/wI3Cdf8ZUi8CgtZ Walq8m2QM9j8WCm4EtgmluzGkHjAn6llmjE7XoLmo/A8MYp0FZhJzghKfCEu54EB 9DhgqQX+zzy7n32CxoAWrGrHegnGeqMpj3rhQ4qVuNn+bOzZ/wTyJQPmXTu4hSW1 0PrXRnfzqnODkB6QDUantABZM5bh1VsqwIlENp+xAFQVsQpsc35lW7AUg7JXczVn ES0+UHG7wVWPJCtIfD4FgIFT1xekPKxRYX9U66LMRbWGYhXfohQX+wFt =u62V -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Minor patches from various people" * tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Output host build info as normal Windows version number hv_balloon: rate-limit "Unhandled message" warning drivers: hv: log when enabling crash_kexec_post_notifiers hv_utils: Add comment about max VMbus packet size in VSS driver Drivers: hv: Compare cpumasks and not their weights in init_vp_index() Drivers: hv: Rename 'alloced' to 'allocated' Drivers: hv: vmbus: Use struct_size() helper in kmalloc() |
||
Arınç ÜNAL
|
f164935f6f |
dt-bindings: pinctrl: rt2880: add missing pin groups and functions
Add the missing pin groups: jtag, wdt Add the missing functions: i2s, jtag, pcie refclk, pcie rst, pcm, spdif2, spdif3, wdt refclk, wdt rst Sort pin groups and functions in alphabetical order. Fix a typo. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20220310140542.7483-1-arinc.unal@arinc9.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Aidan MacDonald
|
9279c00fa4 |
pinctrl: ingenic: Fix regmap on X series SoCs
The X series Ingenic SoCs have a shadow GPIO group which is at a higher
offset than the other groups, and is used for all GPIO configuration.
The regmap did not take this offset into account and set max_register
too low, so the regmap API blocked writes to the shadow group, which
made the pinctrl driver unable to configure any pins.
Fix this by adding regmap access tables to the chip info. The way that
max_register was computed was also off by one, since max_register is an
inclusive bound, not an exclusive bound; this has been fixed.
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Fixes:
|
||
Jialin Zhang
|
283fb4ea08 |
pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
In case of error, the function devm_platform_ioremap_resource()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
Fixes:
|
||
Dan Carpenter
|
ce2076ba20 |
pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
The > WPCM450_NUM_BANKS should be >= or it leads to an out of bounds
access on the next line.
Fixes:
|
||
Jonathan Neuschäfer
|
0bb850887c |
pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
CONFIG_GENERIC_PINCTRL_GROUPS must be selected in order for
struct group_desc to be defined in pinctrl/core.h.
Add the missing select line to CONFIG_PINCTRL_WPCM450.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
|
||
Linus Walleij
|
6ef00b42f9 |
pinctrl: nuvoton: Fix sparse warning
Sparse complains: drivers/pinctrl/nuvoton/pinctrl-wpcm450.c:626:9: sparse: sparse: obsolete array initializer, use C99 syntax This is because no equal sign is between the array index and the assignments, in the macro. Fix it up. Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Linus Walleij
|
042a6362ce |
pinctrl: mediatek: mt8186: Account for probe refactoring
The new MT8186 drive came in and the probe calls were refactored at the same time. Fix it up. Fixes a build issue. Cc: Guodong Liu <guodong.liu@mediatek.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Linus Torvalds
|
1ebdbeb03e |
ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical sections
that last too long for very large guests backed by 4 KiB SPTEs.
- Zap invalid and defunct roots asynchronously via concurrency-managed
work queue.
- Allowing yielding when zapping TDP MMU roots in response to the root's
last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the paging
structure now holds RCU as a proxy for all vCPUs running in the guest,
i.e. to prolongs the grace period on their behalf. It then kicks the
the vCPUs out of guest mode before doing rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that
need memcg accounting
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmI4fdwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq8gf/WoeVHtw2QlL5Mmz6McvRRmPAYPLV
wLUIFNrRqRvd8Tw4kivzZoh/xTpwmnojv0YdK5SjKAiMjgv094YI1LrNp1JSPvmL
pitocMkA10RSJNWHeEMg9cMSKH0rKiqeYl6S1e2XsdB+UZZ2BINOCVtvglmjTAvJ
dFBdKdBkqjAUZbdXAGIvz4JEEER3N/LkFDKGaUGX+0QIQOzGBPIyLTxynxIDG6mt
RViCCFyXdy5NkVp5hZFm96vQ2qAlWL9B9+iKruQN++82+oqWbeTdSqPhdwF7GyFz
BfOv3gobQ2c4ef/aMLO5LswZ9joI1t/4kQbbAn6dNybpOAz/NXfDnbNefg==
=keox
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
|
||
|
Linus Torvalds
|
efee6c7929 |
A patch to avoid unnecessarily leaking kernel command line arguments.
TOMOYO: fix __setup handlers return values security/tomoyo/load_policy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJiOZ6XAAoJEEJfEo0MZPUqzwMQAIdvnEHjVOm3jdtTjaOAHAQF 6ElOMwb0fD4dxSSwcXIy7PaMSr7J/ZgT74Gx/7Cv9UODAqqwoRw0ip5TeTp6NyJT jjqXGAr5Ft3JQnM0CuxXaRrUqr5eb+9bafGS0XQV/BS/Hhhbmk7FtkfHqEiYLqNr d6nWi1rkvNbBeDthYquWfHS0QJQlwFToFe/DiyomE+t5txZYzqITPknPj811I4jj MA7KxAvvQh4nHi2nM9nUXf6FPSqnyfEOyMrF/xriXE3w0iI2WWOFTNGMKKCwaSzV 0TwzcAHDbcW1tfgBEL/7t+REpZDl5vW35po0qskyLYZIdX0xPl/0qifFlzN9h4qB Ls0NJlVaZL/F51I4Es3CHkpHOyqUnUhFGvaSjunnadH6frQ+xgTjjZfwQ2U0WJlM 0695Lflt+WCyw1RUmGiyNEdpISLFHhueFuvUWHx1Wn5PI2P/JCYKU3Dz3yx3o30a vwpVyyXP9tuyCnF35EQQIl2nuMRwHzlizsYdIz3UVtxkDNK3Vj9QdPYXrSMFrrTO 2OAYoIm8gBKic8YYM/J2L3TL/Tb4Xn2ilxGGEjTmAUkC4XiutqbNjEVY5Aqk7PnW izqhWwE+Jlg5GGW+YUPNT839M8sLfTq3VI5dBaloxWUQy5nCPUuSSFfU/ge20DVK kjpJBEAVHDA7rOAV/gIq =ZBqm -----END PGP SIGNATURE----- Merge tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1 Pull tomoyo update from Tetsuo Handa: "Avoid unnecessarily leaking kernel command line arguments" * tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: TOMOYO: fix __setup handlers return values |
||
Ard Biesheuvel
|
6a2f0b2d3b |
dt: amd-seattle: add a description of the CPUs and caches
Add a DT description of the CPU and cache hierarchy as found on the AMD Seattle SOC. Given the tight coupling of the PMU with the CPUs, move the PMU node into the cpu .dtsi file as well, and add the missing affinity description. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
e0db1597a7 |
dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0
Disable some peripherals that are not usable on B0 silicon based Overdrives. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
429863e767 |
dt: amd-seattle: add description of the SATA/CCP SMMUs
Add descriptions of the SMMUs that cover the SATA controller(s) on the AMD Seattle SOC. The CCP crypto accelerator shares its SMMU with the second SATA controller, which is only enabled on B1 silicon. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
dd5c160655 |
dt: amd-seattle: add a description of the PCIe SMMU
Add a description of the SMMU that covers the PCIe host bridge on AMD Seattle. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
acd9208ef8 |
dt: amd-seattle: fix PCIe legacy interrupt routing
The AMD Seattle SOC can be configured to expose up to 3 PCIe root ports, each of which is wired to 4 dedicated SPI wired interrupts for legacy INTx support. Update the SOC DT description to reflect this. Fix a stale comment about the size of the MMIO64 resource window while at it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
9bd9a063ac |
dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding
Upgrade the DT descriptions of the AMD Seattle XGBE network controllers to use the current SMMU bindings. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
f179eb6b3c |
dt: amd-seattle: remove Overdrive revision A0 support
Support for AMD Seattle silicon revision A0 is no longer relevant, since we no longer have a driver for the network controller, and the PCIe on these boards was very unreliable. So drop the DTS description of the A0 version of the overdrive board. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
a4eb44a643 |
dt: amd-seattle: remove Husky platform
The Huskyboard never made it to production, and its successor the Celloboard was only shipped in very limited quantities with ACPI only firmware, so the historical significance of husky.dts is highly questionable. Let's drop it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
3ce62cf4dc |
flexible-array transformations for 5.18-rc1
Hi Linus, Please, pull the following treewide patch that replaces zero-length arrays with flexible-array members. This patch has been baking in linux-next for a whole development cycle. Thanks -- Gustavo -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmI6GIUACgkQRwW0y0cG 2zFLWw/+OB1gZeQD3boKpUMntWnn6wjhUxdrO8CYkpzG+B+8TFECXNjy8HV1CSiw GKKRndYELOyYaD5o/F2vtPe10iPHbrdIlMFRPBRoht0/cvSZgzHlfT8EjWQwerYY dieztUFKjeSj0MXivdNDnKOTm8o9cz8KmCrWFP+My37Fasn/9+nBX8iNVIvAX4xy T+IVmjtDifQUsTs298UGnBvDeuZOiGHhXXU5rq6lIX0Rl554OsWZW94d6jUPj/h7 t1v6jdojNuyaMKn45/xnPj9VvmDiSu3K67m3fjRdzLPDOhISjr2fw4KEUOKdsebh yJ9t5u8IufyPbm9kyI+rZt+T8ZlV2/qt2+mt6QgtDMnWrs+4nU15JY0SHImMSBZQ rBEZcQlrIcGJ+CsNB8Y7jIGYO0SSkhodAvfl0LRA0AbTqLGqq0OkAQS5D52r3H2r uz6xdYb7kG43XaRyaAIPqhZsp/jk2NrXvEvin2tSaXZFR1cxp+oxcV2UajmnOU6i EIBS4PzJnYx2RZRa+h8YbBa/+D4N6+fj/tjmwBawiUBPjjaLAsGFNwUHqvBoD05S bk6oXi654NBwVjsknZ0grVz0TtSvdZ3uJL5FZApTOHITqH8vlxlNefmHri4vZRZO NN7NIQ0yaUCnorzMg+vP8ZtflhQwrMJbjwIS9YD0RHd7MBhYX8k= =xZD2 -----END PGP SIGNATURE----- Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members |
||
|
Linus Torvalds
|
cd4699c5fd |
prlimit and set/getpriority tasklist_lock optimizations
The tasklist_lock popped up as a scalability bottleneck on some testing workloads. The readlocks in do_prlimit and set/getpriority are not necessary in all cases. Based on a cycles profile, it looked like ~87% of the time was spent in the kernel, ~42% of which was just trying to get *some* spinlock (queued_spin_lock_slowpath, not necessarily the tasklist_lock). The big offenders (with rough percentages in cycles of the overall trace): - do_wait 11% - setpriority 8% (this patchset) - kill 8% - do_exit 5% - clone 3% - prlimit64 2% (this patchset) - getrlimit 1% (this patchset) I can't easily test this patchset on the original workload for various reasons. Instead, I used the microbenchmark below to at least verify there was some improvement. This patchset had a 28% speedup (12% from baseline to set/getprio, then another 14% for prlimit). One interesting thing is that my libc's getrlimit() was calling prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64 had no effect - it essentially optimized the older syscalls only. I didn't do that in this patchset, but figured I'd mention it since it was an option from the previous patch's discussion. v3: https://lkml.kernel.org/r/20220106172041.522167-1-brho@google.com v2: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/ - update_rlimit_cpu on the group_leader instead of for_each_thread. - update_rlimit_cpu still returns 0 or -ESRCH, even though we don't care about the error here. it felt safer that way in case someone uses that function again. v1: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/ int main(int argc, char **argv) { pid_t child; struct rlimit rlim[1]; fork(); fork(); fork(); fork(); fork(); fork(); for (int i = 0; i < 5000; i++) { child = fork(); if (child < 0) exit(1); if (child > 0) { usleep(1000); kill(child, SIGTERM); waitpid(child, NULL, 0); } else { for (;;) { setpriority(PRIO_PROCESS, 0, getpriority(PRIO_PROCESS, 0)); getrlimit(RLIMIT_CPU, rlim); } } } return 0; } Barret Rhoden (3): setpriority: only grab the tasklist_lock for PRIO_PGRP prlimit: make do_prlimit() static prlimit: do not grab the tasklist_lock include/linux/posix-timers.h | 2 +- include/linux/resource.h | 2 - kernel/sys.c | 127 +++++++++++++++++---------------- kernel/time/posix-cpu-timers.c | 12 +++- 4 files changed, 76 insertions(+), 67 deletions(-) I have dropped the first change in this series as an almost identical change was merged as commit |
||
|
Linus Torvalds
|
2e2d4650b3 |
fs.rt.v5.18
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjr50AAKCRCRxhvAZXjc oroBAQC0daGrkl6XJirLzyMVjNWWbuSEdB+Q3ipMrwySxjYmtwD/XSPGAKGBbHQz 13EtvTMT8FlqSyDIKHYBM5uDyrWQZgs= =uJdq -----END PGP SIGNATURE----- Merge tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull mount attributes PREEMPT_RT update from Christian Brauner: "This contains Sebastian's fix to make changing mount attributes/getting write access compatible with CONFIG_PREEMPT_RT. The change only applies when users explicitly opt-in to real-time via CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited quite a long time with this to make sure folks could take a good look" * tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT. |
||
|
Linus Torvalds
|
15f2e3d6c1 |
fs.v5.18
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjrxKAAKCRCRxhvAZXjc oi77AQDdLziGyeKSHlyPw1xeWiqsZVRLhhD07F8kVaAkjg3ZWwEAs3jL0Pzfnd7J IIx//6YK46cbfc471FdVuUDfMjkfVAw= =VaFd -----END PGP SIGNATURE----- Merge tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull mount_setattr updates from Christian Brauner: "This contains a few more patches to massage the mount_setattr() codepaths and one minor fix to reuse a helper we added some time back. The final two patches do similar cleanups in different ways. One patch is mine and the other is Al's who was nice enough to give me a branch for it. Since his came in later and my branch had been sitting in -next for quite some time we just put his on top instead of swap them" * tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: mount_setattr(): clean the control flow and calling conventions fs: clean up mount_setattr control flow fs: don't open-code mnt_hold_writers() fs: simplify check in mount_setattr_commit() fs: add mnt_allow_writers() and simplify mount_setattr_prepare() |
||
Kaiwen Hu
|
60021bd754 |
btrfs: prevent subvol with swapfile from being deleted
A subvolume with an active swapfile must not be deleted otherwise it would not be possible to deactivate it. After the subvolume is deleted, we cannot swapoff the swapfile in this deleted subvolume because the path is unreachable. The swapfile is still active and holding references, the filesystem cannot be unmounted. The test looks like this: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt btrfs sub create $mnt/subvol touch $mnt/subvol/swapfile chmod 600 $mnt/subvol/swapfile chattr +C $mnt/subvol/swapfile dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096 mkswap $mnt/subvol/swapfile swapon $mnt/subvol/swapfile btrfs sub delete $mnt/subvol swapoff $mnt/subvol/swapfile # failed: No such file or directory swapoff --all unmount $mnt # target is busy. To prevent above issue, we simply check that whether the subvolume contains any active swapfile, and stop the deleting process. This behavior is like snapshot ioctl dealing with a swapfile. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Kaiwen Hu <kevinhu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Josef Bacik
|
a7d16d9a07 |
btrfs: do not warn for free space inode in cow_file_range
This is a long time leftover from when I originally added the free space inode, the point was to catch cases where we weren't honoring the NOCOW flag. However there exists a race with relocation, if we allocate our free space inode in a block group that is about to be relocated, we could trigger the COW path before the relocation has the opportunity to find the extents and delete the free space cache. In production where we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around 5k times in a 2 week period, so not super common but enough that it's at the top of our metrics. We're properly handling the error here, and with us phasing out v1 space cache anyway just drop the WARN_ON_ONCE. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Qu Wenruo
|
75a36a7d3e |
btrfs: avoid defragging extents whose next extents are not targets
[BUG] There is a report that autodefrag is defragging single sector, which is completely waste of IO, and no help for defragging: btrfs-cleaner-808 defrag_one_locked_range: root=256 ino=651122 start=0 len=4096 [CAUSE] In defrag_collect_targets(), we check if the current range (A) can be merged with next one (B). If mergeable, we will add range A into target for defrag. However there is a catch for autodefrag, when checking mergeability against range B, we intentionally pass 0 as @newer_than, hoping to get a higher chance to merge with the next extent. But in the next iteration, range B will looked up by defrag_lookup_extent(), with non-zero @newer_than. And if range B is not really newer, it will rejected directly, causing only range A being defragged, while we expect to defrag both range A and B. [FIX] Since the root cause is the difference in check condition of defrag_check_next_extent() and defrag_collect_targets(), we fix it by: 1. Pass @newer_than to defrag_check_next_extent() 2. Pass @extent_thresh to defrag_check_next_extent() This makes the check between defrag_collect_targets() and defrag_check_next_extent() more consistent. While there is still some minor difference, the remaining checks are focus on runtime flags like writeback/delalloc, which are mostly transient and safe to be checked only in defrag_collect_targets(). Link: https://github.com/btrfs/linux/issues/423#issuecomment-1066981856 CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Darrick J. Wong
|
05fd9564e9 |
btrfs: fix fallocate to use file_modified to update permissions consistently
Since the initial introduction of (posix) fallocate back at the turn of the century, it has been possible to use this syscall to change the user-visible contents of files. This can happen by extending the file size during a preallocation, or through any of the newer modes (punch, zero range). Because the call can be used to change file contents, we should treat it like we do any other modification to a file -- update the mtime, and drop set[ug]id privileges/capabilities. The VFS function file_modified() does all this for us if pass it a locked inode, so let's make fallocate drop permissions correctly. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
bbac58698a |
btrfs: remove device item and update super block in the same transaction
[BUG]
There is a report that a btrfs has a bad super block num devices.
This makes btrfs to reject the fs completely.
BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here
BTRFS error (device sdd3): failed to read chunk tree: -22
BTRFS error (device sdd3): open_ctree failed
[CAUSE]
During btrfs device removal, chunk tree and super block num devs are
updated in two different transactions:
btrfs_rm_device()
|- btrfs_rm_dev_item(device)
| |- trans = btrfs_start_transaction()
| | Now we got transaction X
| |
| |- btrfs_del_item()
| | Now device item is removed from chunk tree
| |
| |- btrfs_commit_transaction()
| Transaction X got committed, super num devs untouched,
| but device item removed from chunk tree.
| (AKA, super num devs is already incorrect)
|
|- cur_devices->num_devices--;
|- cur_devices->total_devices--;
|- btrfs_set_super_num_devices()
All those operations are not in transaction X, thus it will
only be written back to disk in next transaction.
So after the transaction X in btrfs_rm_dev_item() committed, but before
transaction X+1 (which can be minutes away), a power loss happen, then
we got the super num mismatch.
[FIX]
Instead of starting and committing a transaction inside
btrfs_rm_dev_item(), start a transaction in side btrfs_rm_device() and
pass it to btrfs_rm_dev_item().
And only commit the transaction after everything is done.
Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Daniel Thompson
|
c1cb81429d |
kdb: Fix the putarea helper function
Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.
Fix this the (very) obvious way.
Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!
Fixes:
|
||
Olga Kornievskaia
|
1d15d121cc |
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
There is no reason to retry the operation if a session error had
occurred in such case result structure isn't filled out.
Fixes:
|
||
|
Olga Kornievskaia
|
82ee41b85c |
SUNRPC don't resend a task on an offlined transport
When a task is being retried, due to an NFS error, if the assigned
transport has been put offline and the task is relocatable pick a new
transport.
Fixes:
|