This tagger property is in fact not used at all by the tagger, only by
the switch driver. Therefore it makes sense to be moved to
sja1105_private.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ocelot-8021q driver was converted to deferred xmit as part of
commit 8d5f7954b7 ("net: dsa: felix: break at first CPU port during
init and teardown"), the deferred implementation was deliberately made
subtly different from what sja1105 has.
The implementation differences lied on the following observations:
- There might be a race between these two lines in tag_sja1105.c:
skb_queue_tail(&sp->xmit_queue, skb_get(skb));
kthread_queue_work(sp->xmit_worker, &sp->xmit_work);
and the skb dequeue logic in sja1105_port_deferred_xmit(). For
example, the xmit_work might be already queued, however the work item
has just finished walking through the skb queue. Because we don't
check the return code from kthread_queue_work, we don't do anything if
the work item is already queued.
However, nobody will take that skb and send it, at least until the
next timestampable skb is sent. This creates additional (and
avoidable) TX timestamping latency.
To close that race, what the ocelot-8021q driver does is it doesn't
keep a single work item per port, and a skb timestamping queue, but
rather dynamically allocates a work item per packet.
- It is also unnecessary to have more than one kthread that does the
work. So delete the per-port kthread allocations and replace them with
a single kthread which is global to the switch.
This change brings the two implementations in line by applying those
observations to the sja1105 driver as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code is not necessary and complicates the conversion of this driver
to tagger-owned memory. If there is a PTP packet that is sent
concurrently with the port getting disabled, the deferred xmit mechanism
is robust enough to time out when it sees that it hasn't been delivered,
and recovers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The felix driver makes very light use of dp->priv, and the tagger is
effectively stateless. dp->priv is practically only needed to set up a
callback to perform deferred xmit of PTP and STP packets using the
ocelot-8021q tagging protocol (the main ocelot tagging protocol makes no
use of dp->priv, although this driver sets up dp->priv irrespective of
actual tagging protocol in use).
struct felix_port (what used to be pointed to by dp->priv) is removed
and replaced with a two-sided structure. The public side of this
structure, visible to the switch driver, is ocelot_8021q_tagger_data.
The private side is ocelot_8021q_tagger_private, and the latter
structure physically encapsulates the former. The public half of the
tagger data structure can be accessed through a helper of the same name
(ocelot_8021q_tagger_data) which also sanity-checks the protocol
currently in use by the switch. The public/private split was requested
by Andrew Lunn.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel is working on register access over Ethernet for the qca8k switch
family. This requires the qca8k tagging protocol driver to receive
frames which aren't intended for the network stack, but instead for the
qca8k switch driver itself.
The dp->priv is currently the prevailing method for passing data back
and forth between the tagging protocol driver and the switch driver.
However, this method is riddled with caveats.
The DSA design allows in principle for any switch driver to return any
protocol it desires in ->get_tag_protocol(). The dsa_loop driver can be
modified to do just that. But in the current design, the memory behind
dp->priv has to be allocated by the switch driver, so if the tagging
protocol is paired to an unexpected switch driver, we may end up in NULL
pointer dereferences inside the kernel, or worse (a switch driver may
allocate dp->priv according to the expectations of a different tagger).
The latter possibility is even more plausible considering that DSA
switches can dynamically change tagging protocols in certain cases
(dsa <-> edsa, ocelot <-> ocelot-8021q), and the current design lends
itself to mistakes that are all too easy to make.
This patch proposes that the tagging protocol driver should manage its
own memory, instead of relying on the switch driver to do so.
After analyzing the different in-tree needs, it can be observed that the
required tagger storage is per switch, therefore a ds->tagger_data
pointer is introduced. In principle, per-port storage could also be
introduced, although there is no need for it at the moment. Future
changes will replace the current usage of dp->priv with ds->tagger_data.
We define a "binding" event between the DSA switch tree and the tagging
protocol. During this binding event, the tagging protocol's ->connect()
method is called first, and this may allocate some memory for each
switch of the tree. Then a cross-chip notifier is emitted for the
switches within that tree, and they are given the opportunity to fix up
the tagger's memory (for example, they might set up some function
pointers that represent virtual methods for consuming packets).
Because the memory is owned by the tagger, there exists a ->disconnect()
method for the tagger (which is the place to free the resources), but
there doesn't exist a ->disconnect() method for the switch driver.
This is part of the design. The switch driver should make minimal use of
the public part of the tagger data, and only after type-checking it
using the supplied "proto" argument.
In the code there are in fact two binding events, one is the initial
event in dsa_switch_setup_tag_protocol(). At this stage, the cross chip
notifier chains aren't initialized, so we call each switch's connect()
method by hand. Then there is dsa_tree_bind_tag_proto() during
dsa_tree_change_tag_proto(), and here we have an old protocol and a new
one. We first connect to the new one before disconnecting from the old
one, to simplify error handling a bit and to ensure we remain in a valid
state at all times.
Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the Bluetooth on ROCK Pi 4 boards.
ROCK Pi 4 boards has BCM4345C5 and now it is supported
on Mainline Linux, brcm,bcm43438-bt still working but
observed the BT Audio issues with latest test.
So, use the BCM4345C5 compatible and its associated
properties like clock-names as lpo and max-speed.
Attach vbat and vddio supply rails as well.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In a typical mv88e6xxx switch tree like this:
CPU
| .----.
.--0--. | .--0--.
| sw0 | | | sw1 |
'-1-2-' | '-1-2-'
'---'
If sw1p{1,2} are added to a bridge that sw0p1 is not a part of, sw0
still needs to add a crosschip PVT entry for the virtual DSA device
assigned to represent the bridge.
Fixes: ce5df6894a ("net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inside netns owned by non-init userns, sysctls about ARP/neighbor is
currently not visible and configurable.
For the attributes these sysctls correspond to, any modifications make
effects on the performance of networking(ARP, especilly) only in the
scope of netns, which does not affect other netns.
Actually, some tools via netlink can modify these attribute. iproute2 is
an example. see as follows:
$ unshare -ur -n
$ cat /proc/sys/net/ipv4/neigh/lo/retrans_time
cat: can't open '/proc/sys/net/ipv4/neigh/lo/retrans_time': No such file
or directory
$ ip ntable show dev lo
inet arp_cache
dev lo
refcnt 1 reachable 19494 base_reachable 30000 retrans 1000
gc_stale 60000 delay_probe 5000 queue 101
app_probes 0 ucast_probes 3 mcast_probes 3
anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000
inet6 ndisc_cache
dev lo
refcnt 1 reachable 42394 base_reachable 30000 retrans 1000
gc_stale 60000 delay_probe 5000 queue 101
app_probes 0 ucast_probes 3 mcast_probes 3
anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0
$ ip ntable change name arp_cache dev <if> retrans 2000
inet arp_cache
dev lo
refcnt 1 reachable 22917 base_reachable 30000 retrans 2000
gc_stale 60000 delay_probe 5000 queue 101
app_probes 0 ucast_probes 3 mcast_probes 3
anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000
inet6 ndisc_cache
dev lo
refcnt 1 reachable 35524 base_reachable 30000 retrans 1000
gc_stale 60000 delay_probe 5000 queue 101
app_probes 0 ucast_probes 3 mcast_probes 3
anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add second DSI compatible to comply with DT schema validation
comming in the second patch.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211211233818.88482-1-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The checks performed by commit aed9d65ac3 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.
Fixes: aed9d65ac3 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under some conditions, USB gadget devices can show allocated buffer
contents to a host. Fix this up by zero-allocating them so that any
extra data will all just be zeros.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes USB hosts can ask for buffers that are too large from endpoint
0, which should not be allowed. If this happens for OUT requests, stall
the endpoint, but for IN requests, trim the request size to the endpoint
buffer size.
Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mentined by Takashi Sakamoto, the system-wide alsa-lib configuration
may override the standard device declarations. This patch use the private
alsa-lib configuration to set the predictable environment.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20211208095209.1772296-1-perex@perex.cz
[Restructure version test to keep the preprocessor happy -- broonie]
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210185410.740009-4-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The volatile attribute of control element means that the hardware can
voluntarily change the state of control element independent of any
operation by software. ALSA control core necessarily sends notification
to userspace subscribers for any change from userspace application, while
it doesn't for the hardware's voluntary change.
This commit adds optimization for the attribute. Even if read value is
different from written value, the test reports success as long as the
target control element has the attribute. On the other hand, the
difference is itself reported for developers' convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/Ya7TAHdMe9i41bsC@workstation
[Fix comment style as suggested by Shuah -- broonie]
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210185410.740009-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a basic test for the mixer control interface. For every control on
every sound card in the system it checks that it can read and write the
default value where the control supports that and for writeable controls
attempts to write all valid values, restoring the default values after
each test to minimise disruption for users.
There are quite a few areas for improvement - currently no coverage of the
generation of notifications, several of the control types don't have any
coverage for the values and we don't have any testing of error handling
when we attempt to write out of range values - but this provides some basic
coverage.
This is added as a kselftest since unlike other ALSA test programs it does
not require either physical setup of the device or interactive monitoring
by users and kselftest is one of the test suites that is frequently run by
people doing general automated testing so should increase coverage. It is
written in terms of alsa-lib since tinyalsa is not generally packaged for
distributions which makes things harder for general users interested in
kselftest as a whole but it will be a barrier to people with Android.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211210185410.740009-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initializations.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20211212070422.281924-1-wangborong@cdjrlc.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Coverity issued the following warning:
6685 cands = bpf_core_add_cands(cands, main_btf, 1);
6686 if (IS_ERR(cands))
>>> CID 1510300: (RETURN_LOCAL)
>>> Returning pointer "cands" which points to local variable "local_cand".
6687 return cands;
It's a false positive.
Add ERR_CAST() to silence it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hou Tao says:
====================
Hi,
The motivation for introducing bpf_strncmp() helper comes from
two aspects:
(1) clang doesn't always replace strncmp() automatically
In tracing program, sometimes we need to using a home-made
strncmp() to check whether or not the file name is expected.
(2) the performance of home-made strncmp is not so good
As shown in the benchmark in patch #4, the performance of
bpf_strncmp() helper is 18% or 33% better than home-made strncmp()
under x86-64 or arm64 when the compared string length is 64. When
the string length grows to 4095, the performance win will be
179% or 600% under x86-64 or arm64.
Any comments are welcome.
Regards,
Tao
Change Log:
v2:
* rebased on bpf-next
* drop patch "selftests/bpf: factor out common helpers for benchmarks"
(suggested by Andrii)
* remove unnecessary inline functions and add comments for programs which
will be rejected by verifier in patch 4 (suggested by Andrii)
* rename variables used in will-fail programs to clarify the purposes.
v1: https://lore.kernel.org/bpf/20211130142215.1237217-1-houtao1@huawei.com
* change API to bpf_strncmp(const char *s1, u32 s1_sz, const char *s2)
* add benchmark refactor and benchmark between bpf_strncmp() and strncmp()
RFC: https://lore.kernel.org/bpf/20211106132822.1396621-1-houtao1@huawei.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Four test cases are added:
(1) ensure the return value is expected
(2) ensure no const string size is rejected
(3) ensure writable target is rejected
(4) ensure no null-terminated target is rejected
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-5-houtao1@huawei.com
Fix checkpatch error: "ERROR: Bad function definition - void foo()
should probably be void foo(void)". Most replacements are done by
the following command:
sed -i 's#\([a-z]\)()$#\1(void)#g' testing/selftests/bpf/benchs/*.c
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-3-houtao1@huawei.com
The helper compares two strings: one string is a null-terminated
read-only string, and another string has const max storage size
but doesn't need to be null-terminated. It can be used to compare
file name in tracing or LSM program.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-2-houtao1@huawei.com
Add the watchdog node which also enables reboot support on the t8103.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
This new SoC uses the same pinctrl hardware, so just add a new per-SoC
compatible.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This new SoC is compatible with the existing driver, but the block
supports 4 downstream ports, so we need to adjust the binding to
allow that.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This block is compatible with t8103, so just add the new per-SoC
compatible under apple,i2c.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is seemingly required for DCP/DCPEXT, without which they refuse to
boot properly. They need to be set to minimum state 4 (clock gated).
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is required for DCP to boot successfully; it seems if power gating
is allowed, they do not wake up properly.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
A few devices (DCP/DCPEXT) need to have the minimum power state for
auto-PM configured. Add a property that allows the DT to specify this
value.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
libbpf's obj->nr_programs includes static and global functions. That number
could be higher than the actual number of bpf programs going be loaded by
gen_loader. Passing larger nr_programs to bpf_gen__init() doesn't hurt. Those
exra stack slots will stay as zero. bpf_gen__finish() needs to check that
actual number of progs that gen_loader saw is less than or equal to
obj->nr_programs.
Fixes: ba05fd36b8 ("libbpf: Perform map fd cleanup for gen_loader in case of error")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Four fixes, all in drivers. Three are small and obvious, the qedi one
is a bit larger but also pretty obvious.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYbUihiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfqeAQDSVbQd
T9SwcBLKWhElkw57urT2FLEx4fVFhsPHeCsImwD/ZLk3zq7Hu1jc/I5F1NQhb8Ux
mRy0PZEMf8XKzaglYYk=
=zqyN
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
Three are small and obvious, the qedi one is a bit larger but also
pretty obvious"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Format log strings only if needed
scsi: scsi_debug: Fix buffer size of REPORT ZONES command
scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue
scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()
- Fix a data corruption vector that can result from the ro remount
process failing to clear all speculative preallocations from files
and the rw remount process not noticing the incomplete cleanup.
-----BEGIN PGP SIGNATURE-----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=N9Wf
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"This fixes a race between a readonly remount process and other
processes that hold a file IOLOCK on files that previously experienced
copy on write, that could result in severe filesystem corruption if
the filesystem is then remounted rw.
I think this is fairly rare (since the only reliable reproducer I have
that fits the second criteria is the experimental xfs_scrub program),
but the race is clear, so we still need to fix this.
Summary:
- Fix a data corruption vector that can result from the ro remount
process failing to clear all speculative preallocations from files
and the rw remount process not noticing the incomplete cleanup"
* tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove all COW fork extents when remounting readonly
Pull percpu fixes from Dennis Zhou:
"This contains a fix for SMP && !MMU archs for percpu which has been
tested by arm and sh. It seems in the past they have gotten away with
it due to mapping of vm functions to km functions, but this fell apart
a few releases ago and was just reported recently.
The other is just a minor dependency clean up.
I think queued up right now by Andrew is a fix in percpu that papers
of what seems to be a bug in hotplug for a special situation with
memoryless nodes. Michal Hocko is digging into it further"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu_ref: Replace kernel.h with the necessary inclusions
percpu: km: ensure it is used with NOMMU (either UP or SMP)
Naresh reported another architecture that was broken by the same typo that
was already fixed for three architectures: mips also refers to the
futex_atomic_op_inuser_local() function by the wrong name and runs into a
missing closing '}' as well.
Going through the source tree the same typo was found in the documentation
as well as in the xtensa code, both of which ended up escaping the
regression testing so far. In the case of xtensa, it appears that the
broken code path is only used when building for platforms that are not
supported by the default gcc configuration, so they are impossible to test
for with default setups.
After going through these more carefully and fixing up the typos, all
architectures have been build-tested again to ensure that this is now
complete.
Fixes: 4e0d846344 ("futex: Fix sparc32/m68k/nds32 build regression")
Fixes: 3f2bedabb6 ("futex: Ensure futex_atomic_cmpxchg_inatomic() is present")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211203080823.2938839-1-arnd@kernel.org
- Prevent out-of-bounds access to per sample registers.
- Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.
- Intel PT fixes, half of those are one-liners:
- Fix some PGE (packet generation enable/control flow packets) usage.
- Fix sync state when a PSB (synchronization) packet is found.
- Fix intel_pt_fup_event() assumptions about setting state type.
- Fix state setting when receiving overflow (OVF) packet.
- Fix next 'err' value, walking trace.
- Fix missing 'instruction' events with 'q' option.
- Fix error timestamp setting on the decoder error path.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYbTE4gAKCRCyPKLppCJ+
JyuQAQC6hgdIIY+1aXlTer4OKep8AdnH5y6q1GLxcNX0UX/iUgD+OjxBFiFk50Ix
jCWFjM1rsDHLJbPZmztRX4IxNHFJzAg=
=ZkBH
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent out-of-bounds access to per sample registers.
- Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.
- Intel PT fixes, half of those are one-liners:
- Fix some PGE (packet generation enable/control flow packets) usage.
- Fix sync state when a PSB (synchronization) packet is found.
- Fix intel_pt_fup_event() assumptions about setting state type.
- Fix state setting when receiving overflow (OVF) packet.
- Fix next 'err' value, walking trace.
- Fix missing 'instruction' events with 'q' option.
- Fix error timestamp setting on the decoder error path.
* tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Fix NULL vs IS_ERR_OR_NULL() checking
perf intel-pt: Fix error timestamp setting on the decoder error path
perf intel-pt: Fix missing 'instruction' events with 'q' option
perf intel-pt: Fix next 'err' value, walking trace
perf intel-pt: Fix state setting when receiving overflow (OVF) packet
perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type
perf intel-pt: Fix sync state when a PSB (synchronization) packet is found
perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage
perf tools: Prevent out-of-bounds access to registers
-----BEGIN PGP SIGNATURE-----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=aqTJ
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few block fixes that should go into this release:
- NVMe pull request:
- set ana_log_size to 0 after freeing ana_log_buf (Hou Tao)
- show subsys nqn for duplicate cntlids (Keith Busch)
- disable namespace access for unsupported metadata (Keith
Busch)
- report write pointer for a full zone as zone start + zone len
(Niklas Cassel)
- fix use after free when disconnecting a reconnecting ctrl
(Ruozhu Li)
- fix a list corruption in nvmet-tcp (Sagi Grimberg)
- Fix for a regression on DIO single bio async IO (Pavel)
- ioprio seteuid fix (Davidlohr)
- mtd fix that subsequently got reverted as it was broken, will get
re-done and submitted for the next round
- Two MD fixes via Song (Markus, zhangyue)"
* tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
Revert "mtd_blkdevs: don't scan partitions for plain mtdblock"
block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)
md: fix double free of mddev->private in autorun_array()
md: fix update super 1.0 on rdev size change
nvmet-tcp: fix possible list corruption for unexpected command failure
block: fix single bio async DIO error handling
nvme: fix use after free when disconnecting a reconnecting ctrl
nvme-multipath: set ana_log_size to 0 after free ana_log_buf
mtd_blkdevs: don't scan partitions for plain mtdblock
nvme: report write pointer for a full zone as zone start + zone len
nvme: disable namespace access for unsupported metadata
nvme: show subsys nqn for duplicate cntlids
-----BEGIN PGP SIGNATURE-----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=BUVd
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that are all bound for stable:
- Two syzbot reports for io-wq that turned out to be separate fixes,
but ultimately very closely related
- io_uring task_work running on cancelations"
* tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
io-wq: check for wq exit after adding new worker task_work
io_uring: ensure task_work gets run as part of cancelations
io-wq: remove spurious bit clear on task_work addition
- Fix qcom mux logic to look at the proper parent table member.
Luckily this clk type isn't very common.
- Don't kill clks on qcom systems that use Trion PLLs that are
enabled out of the bootloader. We will simply skip programming
the PLL rate if it's already done.
- Use the proper clk_ops for the qcom sm6125 ICE clks.
- Use module_platform_driver() in i.MX as it can be a module.
- Fix a UAF in the versatile clk driver on an error path.
-----BEGIN PGP SIGNATURE-----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=qhVy
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Fix qcom mux logic to look at the proper parent table member. Luckily
this clk type isn't very common.
- Don't kill clks on qcom systems that use Trion PLLs that are enabled
out of the bootloader. We will simply skip programming the PLL rate
if it's already done.
- Use the proper clk_ops for the qcom sm6125 ICE clks.
- Use module_platform_driver() in i.MX as it can be a module.
- Fix a UAF in the versatile clk driver on an error path.
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: versatile: clk-icst: use after free on error path
clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1
clk: imx: use module_platform_driver
clk: qcom: clk-alpha-pll: Don't reconfigure running Trion
clk: qcom: regmap-mux: fix parent clock lookup
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
-----BEGIN PGP SIGNATURE-----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=hYDY
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
* tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "kbuild: Enable DT schema checks for %.dtb targets"
dt-bindings: bq25980: Fixup the example
dt-bindings: input: gpio-keys: Fix interrupts in example
dt-bindings: net: Reintroduce PHY no lane swap binding
dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema
of/irq: Add a quirk for controllers with their own definition of interrupt-map
dt-bindings: iio: adc: exynos-adc: Fix node name in example
Merge misc fixes from Andrew Morton:
"21 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, and mm
(mlock, pagecache, damon, slub, memcg, hugetlb, and pagecache)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
hugetlbfs: fix issue of preallocation of gigantic pages can't work
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
mm/slub: fix endianness bug for alloc/free_traces attributes
selftests/damon: split test cases
selftests/damon: test debugfs file reads/writes with huge count
selftests/damon: test wrong DAMOS condition ranges input
selftests/damon: test DAMON enabling with empty target_ids case
selftests/damon: skip test if DAMON is running
mm/damon/vaddr-test: remove unnecessary variables
mm/damon/vaddr-test: split a test function having >1024 bytes frame size
mm/damon/vaddr: remove an unnecessary warning message
mm/damon/core: remove unnecessary error messages
mm/damon/dbgfs: remove an unnecessary error message
mm/damon/core: use better timer mechanisms selection threshold
mm/damon/core: fix fake load reports due to uninterruptible sleeps
timers: implement usleep_idle_range()
filemap: remove PageHWPoison check from next_uptodate_page()
mailmap: update email address for Guo Ren
MAINTAINERS: update kdump maintainers
...
Make use of memset_startat helper to simplify the code, there should be
no functional change as a result of this patch.
Link: https://lkml.kernel.org/r/20211210012245.207489-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
synth_events is returning -EINVAL if the dyn_event create command does
not contain ' \t'. This prevents other systems from getting called back.
synth_events needs to return -ECANCELED in these cases when the command
is not targeting the synth_event system.
Link: https://lore.kernel.org/linux-trace-devel/20210930223821.11025-1-beaub@linux.microsoft.com
Fixes: c9e759b1e8 ("tracing: Rework synthetic event command parsing")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of referencing the inode from a dentry via dentry->d_inode, use
the helper function d_inode(dentry) instead. This is the considered the
correct way to access it.
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported: https://lore.kernel.org/all/20211208104454.nhxyvmmn6d2qhpwl@wittgenstein/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
