The jitterentropy collection loop in jent_gen_entropy() can in principle
run indefinitely without making any progress if it only receives stuck
measurements as determined by jent_stuck(). After 31 consecutive stuck
samples, the Repetition Count Test (RCT) would fail anyway and the
jitterentropy RNG instances moved into ->health_failure == 1 state.
jent_gen_entropy()'s caller, jent_read_entropy() would then check for
this ->health_failure condition and return an error if found set. It
follows that there's absolutely no point in continuing the collection loop
in jent_gen_entropy() once the RCT has failed.
Make the jitterentropy collection loop more robust by terminating it upon
jent_health_failure() so that it won't continue to run indefinitely without
making any progress.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The jitterentropy's Repetition Count Test (RCT) as well as the Adaptive
Proportion Test (APT) are run unconditionally on any collected samples.
However, their result, i.e. ->health_failure, will only get checked if
fips_enabled is set, c.f. the jent_health_failure() wrapper.
I would argue that a RCT or APT failure indicates that something's
seriously off and that this should always be reported as an error,
independently of whether FIPS mode is enabled or not: it should be up to
callers whether or not and how to handle jitterentropy failures.
Make jent_health_failure() to unconditionally return ->health_failure,
independent of whether fips_enabled is set.
Note that fips_enabled isn't accessed from the jitterentropy code anymore
now. Remove the linux/fips.h include as well as the jent_fips_enabled()
wrapper.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A subsequent patch will make the jitterentropy RNG to unconditionally
report health test errors back to callers, independent of whether
fips_enabled is set or not. The DRBG needs access to a functional
jitterentropy instance only in FIPS mode (because it's the only SP800-90B
compliant entropy source as it currently stands). Thus, it is perfectly
fine for the DRBGs to obtain entropy from the jitterentropy source only
on a best effort basis if fips_enabled is off.
Make the DRBGs to ignore jitterentropy failures if fips_enabled is not set.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYP IP checks the written key depending of the configuration, it's
safer to write the whole configuration to hardware then the key to avoid
unexpected key rejection.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extra crypto manager auto test were crashing or failling due
to 2 reasons:
- block in a dead loop (dues to issues in cipher end process management)
- crash due to read/write unmapped memory (this crash was also reported
when using openssl afalg engine)
Rework interrupt management, interrupts are masked as soon as they are
no more used: if input buffer is fully consumed, "Input FIFO not full"
interrupt is masked and if output buffer is full, "Output FIFO not
empty" interrupt is masked.
And crypto request finish when input *and* outpout buffer are fully
read/write.
About the crash due to unmapped memory, using scatterwalk_copychunks()
that will map and copy each block fix the issue.
Using this api and copying full block will also fix unaligned data
access, avoid early copy of in/out buffer, and make useless the extra
alignment constraint.
Fixes: 9e054ec21e ("crypto: stm32 - Support for STM32 CRYP crypto module")
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes the lrw autotest if lrw uses the CRYP as the AES block cipher
provider (as ecb(aes)). At end of request, CRYP should not update the IV
in case of ECB chaining mode. Indeed the ECB chaining mode never uses
the IV, but the software LRW chaining mode uses the IV field as
a counter and due to the (unexpected) update done by CRYP while the AES
block process, the counter get a wrong value when the IV overflow.
Fixes: 5f49f18d27 ("crypto: stm32/cryp - update to return iv_out")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some auto tests failed because driver wasn't returning the expected
error with some input size/iv value/tag size.
Now:
Return 0 early for empty buffer. (We don't need to start the engine for
an empty input buffer).
Accept any valid authsize for gcm(aes).
Return -EINVAL if iv for ccm(aes) is invalid.
Return -EINVAL if buffer size is a not a multiple of algorithm block size.
Fixes: 9e054ec21e ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't erase key:
If key is erased before the crypto_finalize_.*_request() call, some
pending process will run with a key={ 0 }.
Moreover if the key is reset at end of request, it breaks xts chaining
mode, as for last xts block (in case input len is not a multiple of
block) a new AES request is started without calling again set_key().
Fixes: 9e054ec21e ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as
a workaround, at each block the current IV is saved, if the saved IV
lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set
in hardware.
Fixes: bbb2832620 ("crypto: stm32 - Fix sparse warnings")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change driver to not print an error message when the device
probe is deferred for a clock resource.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change stm32 CRYP driver to defer its probe operation when
reset controller device is registered but has not been probed yet.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ethtool ring feature has _max_pending attributes read-only.
Set only read-write attributes in nsim_set_ringparam.
This patch is useful, if netdevsim device is set-up using NetworkManager,
because NetworkManager sends 0 as MAX values, as it is pointless to
retrieve them in extra call, because they should be read-only. Then,
the device is left in incosistent state (value > MAX).
Fixes: a7fc6db099 ("netdevsim: support ethtool ring and coalesce settings")
Signed-off-by: Filip Pokryvka <fpokryvk@redhat.com>
Link: https://lore.kernel.org/r/20211210175032.411872-1-fpokryvk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clément Léger says:
====================
Add FDMA support on ocelot switch driver
This series adds support for the Frame DMA present on the VSC7514
switch. The FDMA is able to extract and inject packets on the various
ethernet interfaces present on the switch.
====================
Link: https://lore.kernel.org/r/20211209154911.3152830-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ethernet frames can be extracted or injected autonomously to or from
the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list
data structures in memory are used for injecting or extracting Ethernet
frames. The FDMA generates interrupts when frame extraction or
injection is done and when the linked lists need updating.
The FDMA is shared between all the ethernet ports of the switch and
uses a linked list of descriptors (DCB) to inject and extract packets.
Before adding descriptors, the FDMA channels must be stopped. It would
be inefficient to do that each time a descriptor would be added so the
channels are restarted only once they stopped.
Both channels uses ring-like structure to feed the DCBs to the FDMA.
head and tail are never touched by hardware and are completely handled
by the driver. On top of that, page recycling has been added and is
mostly taken from gianfar driver.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds support for changing MTU for the ocelot register based
interface. For ocelot, JUMBO frame size can be set up to 25000 bytes
but has been set to 9000 which is a saner value and allows for maximum
gain of performance with FDMA.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to support PTP in FDMA, PTP handling code is needed. Since
this is the same as for register-based extraction, export it with
a new ocelot_ptp_rx_timestamp() function.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDMA will need this code to prepare the injection frame header when
sending SKBs. Move this code into ocelot_ifh_port_set() and add
conditional IFH setting for vlan and rew op if they are not set.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
M Chetan Kumar says:
====================
net: wwan: iosm: improvements
This patch series brings in IOSM driver improvments.
PATCH1: Set tx queue len.
PATCH2: Release data channel if there is no active IP session.
PATCH3: Removes dead code.
PATCH4: Correct open parenthesis alignment.
====================
Link: https://lore.kernel.org/r/20211209143230.3054755-1-m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix checkpatch warning in iosm_ipc_mmio.c
- Alignment should match open parenthesis
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is
not defined.
Removed the dead code.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there is no active IP session (interface up & running) then
release the data channel.
Use nr_sessions variable to track current active IP sessions.
If the count drops to 0, then send pipe close ctrl message to
release the data channel.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not
invoked in subsequent failure branches(pep_accept_conn() != 0).
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 32ecd22ba6 ("net: mscc: ocelot: split register definitions to a
separate file") left out an include for <soc/mscc/ocelot_vcap.h>. It was
missed because the only consumer was ocelot_vsc7514.h, which already
included ocelot_vcap.
Fixes: 32ecd22ba6 ("net: mscc: ocelot: split register definitions to a separate file")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211209074010.1813010-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The BR-series installation guide from https://driverdownloads.qlogic.com/
mentions the cards support 10Gbase-SR/LR as well as direct attach cables.
The cards only have SFP+ ports, so 10000baseT is not the right mode.
Switch to using more specific link modes added in commit 5711a98221
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
Only compile tested.
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20211208230022.153496-1-erik@kryo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves sock_release_ownership() down in include/net/sock.h and
replaces some sk_lock.owned tests with sock_owned_by_user_nocheck().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20211208062158.54132-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Mh19
-----END PGP SIGNATURE-----
Merge tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more regression fixes and stable patches, mostly one-liners.
Regression fixes:
- fix pointer/ERR_PTR mismatch returned from memdup_user
- reset dedicated zoned mode relocation block group to avoid using it
and filling it without any recourse
Fixes:
- handle a case to FITRIM range (also to make fstests/generic/260
work)
- fix warning when extent buffer state and pages get out of sync
after an IO error
- fix transaction abort when syncing due to missing mapping error set
on metadata inode after inlining a compressed file
- fix transaction abort due to tree-log and zoned mode interacting in
an unexpected way
- fix memory leak of additional extent data when qgroup reservation
fails
- do proper handling of slot search call when deleting root refs"
* tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling
btrfs: zoned: clear data relocation bg on zone finish
btrfs: free exchange changeset on failures
btrfs: fix re-dirty process of tree-log nodes
btrfs: call mapping_set_error() on btree inode with a write error
btrfs: clear extent buffer uptodate when we fail to write it
btrfs: fail if fstrim_range->start == U64_MAX
btrfs: fix error pointer dereference in btrfs_ioctl_rm_dev_v2()
-----BEGIN PGP SIGNATURE-----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=+1L9
-----END PGP SIGNATURE-----
Merge tag '5.16-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two cifs/smb3 fixes - one for stable, the other fixes a recently
reported NTLMSSP auth problem"
* tag '5.16-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix ntlmssp auth when there is no key exchange
cifs: Fix crash on unload of cifs_arc4.ko
has been around for years, but I suspect recent changes may have
widened the race window a little, so I'd like to go ahead and get it in.
-----BEGIN PGP SIGNATURE-----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=GgUu
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Fix a race on startup and another in the delegation code.
The latter has been around for years, but I suspect recent changes may
have widened the race window a little, so I'd like to go ahead and get
it in"
* tag 'nfsd-5.16-2' of git://linux-nfs.org/~bfields/linux:
nfsd: fix use-after-free due to delegation race
nfsd: Fix nsfd startup race (again)
Initialize min_ratio if it is set during bdi unregistration. This can
prevent problems that may occur a when bdi is removed without resetting
min_ratio.
For example.
1) insert external sdcard
2) set external sdcard's min_ratio 70
3) remove external sdcard without setting min_ratio 0
4) insert external sdcard
5) set external sdcard's min_ratio 70 << error occur(can't set)
Because when an sdcard is removed, the present bdi_min_ratio value will
remain. Currently, the only way to reset bdi_min_ratio is to reboot.
[akpm@linux-foundation.org: tweak comment and coding style]
Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com
Signed-off-by: Manjong Lee <mj0123.lee@samsung.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Changheun Lee <nanich.lee@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <seunghwan.hyun@samsung.com>
Cc: <sookwan7.kim@samsung.com>
Cc: <yt0928.kim@samsung.com>
Cc: <junho89.kim@samsung.com>
Cc: <jisoo2146.oh@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Preallocation of gigantic pages can't work bacause of commit
b5389086ad ("hugetlbfs: extend the definition of hugepages parameter
to support node allocation"). When nid is NUMA_NO_NODE(-1),
alloc_bootmem_huge_page will always return without doing allocation.
Fix this by adding more check.
Link: https://lkml.kernel.org/r/20211129133803.15653-1-yaozhenguo1@gmail.com
Fixes: b5389086ad ("hugetlbfs: extend the definition of hugepages parameter to support node allocation")
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the calls to mod_objcg_mlstate(), get_obj_stock() and
put_obj_stock() are done by functions defined within the same "#ifdef
CONFIG_MEMCG_KMEM" compilation block. When CONFIG_MEMCG_KMEM isn't
defined, the following compilation warnings will be issued [1] and [2].
mm/memcontrol.c:785:20: warning: unused function 'mod_objcg_mlstate'
mm/memcontrol.c:2113:33: warning: unused function 'get_obj_stock'
Fix these warning by moving those functions to under the same
CONFIG_MEMCG_KMEM compilation block. There is no functional change.
[1] https://lore.kernel.org/lkml/202111272014.WOYNLUV6-lkp@intel.com/
[2] https://lore.kernel.org/lkml/202111280551.LXsWYt1T-lkp@intel.com/
Link: https://lkml.kernel.org/r/20211129161140.306488-1-longman@redhat.com
Fixes: 559271146e ("mm/memcg: optimize user context object stock access")
Fixes: 68ac5b3c8d ("mm/memcg: cache vmstat data in percpu memcg_stock_pcp")
Signed-off-by: Waiman Long <longman@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On big-endian s390, the alloc/free_traces attributes produce endless
output, because of always 0 idx in slab_debugfs_show().
idx is de-referenced from *v, which points to a loff_t value, with
unsigned int idx = *(unsigned int *)v;
This will only give the upper 32 bits on big-endian, which remain 0.
Instead of only fixing this de-reference, during discussion it seemed
more appropriate to change the seq_ops so that they use an explicit
iterator in private loc_track struct.
This patch adds idx to loc_track, which will also fix the endianness
bug.
Link: https://lore.kernel.org/r/20211117193932.4049412-1-gerald.schaefer@linux.ibm.com
Link: https://lkml.kernel.org/r/20211126171848.17534-1-gerald.schaefer@linux.ibm.com
Fixes: 64dd68497b ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the single test program, debugfs.sh, contains all test cases
for DAMON. When one of the cases fails, finding which case is failed
from the test log is not so easy, and all remaining tests will be
skipped. To improve the situation, this commit splits the single
program into small test programs having their own names.
Link: https://lkml.kernel.org/r/20211201150440.1088-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON debugfs interface users were able to trigger warning by writing
some files with arbitrarily large 'count' parameter. The issue is fixed
with commit db7a347b26 ("mm/damon/dbgfs: use '__GFP_NOWARN' for
user-specified size buffer allocation"). This commit adds a test case
for the issue in DAMON selftests to avoid future regressions.
Link: https://lkml.kernel.org/r/20211201150440.1088-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON debugfs didn't check empty targets when starting monitoring, and
the issue is fixed with commit b5ca3e83dd ("mm/damon/dbgfs: add
adaptive_targets list check before enable monitor_on"). To avoid future
regression, this commit adds a test case for that in DAMON selftests.
Link: https://lkml.kernel.org/r/20211201150440.1088-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Testing the DAMON debugfs files while DAMON is running makes no sense,
as any write to the debugfs files will fail. This commit makes the test
be skipped in this case.
Link: https://lkml.kernel.org/r/20211201150440.1088-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A couple of test functions in DAMON virtual address space monitoring
primitives implementation has unnecessary damon_ctx variables. This
commit removes those.
Link: https://lkml.kernel.org/r/20211201150440.1088-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On some configuration[1], 'damon_test_split_evenly()' kunit test
function has >1024 bytes frame size, so below build warning is
triggered:
CC mm/damon/vaddr.o
In file included from mm/damon/vaddr.c:672:
mm/damon/vaddr-test.h: In function 'damon_test_split_evenly':
mm/damon/vaddr-test.h:309:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=]
309 | }
| ^
This commit fixes the warning by separating the common logic in the
function.
[1] https://lore.kernel.org/linux-mm/202111182146.OV3C4uGr-lkp@intel.com/
Link: https://lkml.kernel.org/r/20211201150440.1088-6-sj@kernel.org
Fixes: 17ccae8bb5 ("mm/damon: add kunit tests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The DAMON virtual address space monitoring primitive prints a warning
message for wrong DAMOS action. However, it is not essential as the
code returns appropriate failure in the case. This commit removes the
message to make the log clean.
Link: https://lkml.kernel.org/r/20211201150440.1088-5-sj@kernel.org
Fixes: 6dea8add4d ("mm/damon/vaddr: support DAMON-based Operation Schemes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON core prints error messages when damon_target object creation is
failed or wrong monitoring attributes are given. Because appropriate
error code is returned for each case, the messages are not essential.
Also, because the code path can be triggered with user-specified input,
this could result in kernel log mistakenly being messy. To avoid the
case, this commit removes the messages.
Link: https://lkml.kernel.org/r/20211201150440.1088-4-sj@kernel.org
Fixes: 4bc05954d0 ("mm/damon: implement a debugfs-based user space interface")
Fixes: b9a6ac4e4e ("mm/damon: adaptively adjust regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When wrong scheme action is requested via the debugfs interface, DAMON
prints an error message. Because the function returns error code, this
is not really needed. Because the code path is triggered by the user
specified input, this can result in kernel log mistakenly being messy.
To avoid the case, this commit removes the message.
Link: https://lkml.kernel.org/r/20211201150440.1088-3-sj@kernel.org
Fixes: af122dd8f3 ("mm/damon/dbgfs: support DAMON-based Operation Schemes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/damon: Trivial fixups and improvements".
This patchset contains trivial fixups and improvements for DAMON and its
kunit/kselftest tests.
This patch (of 11):
DAMON is using hrtimer if requested sleep time is <=100ms, while the
suggested threshold[1] is <=20ms. This commit applies the threshold.
[1] Documentation/timers/timers-howto.rst
Link: https://lkml.kernel.org/r/20211201150440.1088-2-sj@kernel.org
Fixes: ee801b7dd7 ("mm/damon/schemes: activate schemes based on a watermarks mechanism")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because DAMON sleeps in uninterruptible mode, /proc/loadavg reports fake
load while DAMON is turned on, though it is doing nothing. This can
confuse users[1]. To avoid the case, this commit makes DAMON sleeps in
idle mode.
[1] https://lore.kernel.org/all/11868371.O9o76ZdvQC@natalenko.name/
Link: https://lkml.kernel.org/r/20211126145015.15862-3-sj@kernel.org
Fixes: 2224d84854 ("mm: introduce Data Access MONitor (DAMON)")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/damon: Fix fake /proc/loadavg reports", v3.
This patchset fixes DAMON's fake load report issue. The first patch
makes yet another variant of usleep_range() for this fix, and the second
patch fixes the issue of DAMON by making it using the newly introduced
function.
This patch (of 2):
Some kernel threads such as DAMON could need to repeatedly sleep in
micro seconds level. Because usleep_range() sleeps in uninterruptible
state, however, such threads would make /proc/loadavg reports fake load.
To help such cases, this commit implements a variant of usleep_range()
called usleep_idle_range(). It is same to usleep_range() but sets the
state of the current task as TASK_IDLE while sleeping.
Link: https://lkml.kernel.org/r/20211126145015.15862-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211126145015.15862-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
