BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.
Fixes: 8580ac9404 ("bpf: Process in-kernel BTF")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211203053001.740945-1-houtao1@huawei.com
The file system DAX code now does not require the block code. So allow
building a kernel with fuse DAX but not block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-30-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Only build the block based iomap code if CONFIG_BLOCK is set. Currently
that is always the case, but it will change soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-29-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The DAX device <-> block device association is only enabled if
CONFIG_BLOCK is enabled. Update dax.h to account for that and use
the right conditions for the fs_put_dax stub as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-28-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the last user of ->bdev in dax.c by requiring the file system to
pass in an address that already includes the DAX offset. As part of the
only set ->bdev or ->daxdev when actually required in the ->iomap_begin
methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-27-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a flag so that the file system can easily detect DAX operations
based just on the iomap operation requested instead of looking at
inode state using IS_DAX. This will be needed to apply the to be
added partition offset only for operations that actually use DAX,
but not things like fiemap that are based on the block device.
In the long run it should also allow turning the bdev, dax_dev
and inline_data into a union.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-25-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
To prepare for looking at the IOMAP_DAX flag in xfs_bmbt_to_iomap pass in
the input mapping flags to xfs_bmbt_to_iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-24-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While the buffered write iomap ops do work due to the fact that zeroing
never allocates blocks, the DAX zeroing should use the direct ops just
like actual DAX I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-23-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Hide the DAX device lookup from the xfs_super.c code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-22-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Only call fs_dax_get_by_bdev once the sbi has been allocated and remove
the need for the dax_dev local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-21-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Only call fs_dax_get_by_bdev once the sbi has been allocated and remove
the need for the dax_dev local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-20-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out a helper for the "manual" zeroing of a DAX range to clean
up dax_iomap_zero a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-18-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The file relative offset must have the same alignment as the storage
offset, so use that and get rid of the call to iomap_sector.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-17-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add helpers to prepare for using different DAX operations.
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
[hch: split from a larger patch + slight cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-16-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace the two steps of dax_iomap_sector and bdev_dax_pgoff with a
single dax_iomap_pgoff helper that avoids lots of cumbersome sector
conversions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-15-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just pass the vm_fault and iomap_iter structures, and figure out the rest
locally. Note that this requires moving dax_iomap_sector up in the file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-14-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Despite its name copy_user_page expected kernel addresses, which is what
we already have.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-13-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper to perform the entire remapping for DAX accesses. This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-12-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper to perform the entire remapping for DAX accesses. This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-11-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper to perform the entire remapping for DAX accesses. This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-10-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out another DAX setup helper to simplify future changes. Also
move the experimental warning after the checks to not clutter the log
too much if the setup failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-8-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
fs_dax_get_by_bdev is the primary interface to find a dax device for a
block device, so move the partition alignment check there instead of
wiring it up through ->dax_supported.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-7-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Drivers that register a dax_dev should make sure it works, no need
to double check from the file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-6-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CONFIG_DAX_DRIVER only selects CONFIG_DAX now, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The device mapper DAX support is all hanging off a block device and thus
can't be used with device dax. Make it depend on CONFIG_FS_DAX instead
of CONFIG_DAX_DRIVER. This also means that bdev_dax_pgoff only needs to
be built under CONFIG_FS_DAX now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-3-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure ->dax_dev is NULL on error so that the cleanup path doesn't
trip over an ERR_PTR.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211129102203.2243509-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----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=QBwo
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"A single fix for repeated printk spam from loop"
* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
loop: Use pr_warn_once() for loop_control_remove() warning
-----BEGIN PGP SIGNATURE-----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=Xy6S
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
two patches, both in drivers. One is a fix to FC recovery (lpfc) and
the other is an enhancement to support the Intel Alder Motherboard
with the UFS driver which comes under the -rc exception process for
hardware enabling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYat3yyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbwKAP9yj4Da
52hzcLcbjT6Z0SurmLrGd4fTaAinSDueSGvh5wEA/QDugzP7CEnogk9S7cAfJLQf
QO1HhyRn6Vx+0r57Cj0=
=0aRn
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
* Since commit 486408d690 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
* Fix a BUG demoting weak glock holders from a remote node.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmGrPtYUHGFncnVlbmJh
QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTrtgA/+MESXTK8h/HK+M+CAnsJ5jFSVXV8W
wmhhOtqikNGGruxnTJdkipe9PcPRsdwh4XLtmbfGairXnmFqJ+oEG8oRk/Tqoap8
9RxWN+B+Wzh79mNvI3Il3RtvUJGNQGrfDSuT5F4jZ6eZSfjsyY3cgO2KMt2TN5sL
7WXwYnj4VyPa8TdkSFIhfxwiXyal7aC8BVS6UX83CUIrhJvNG70A3hqVrIuKymUf
dNiLWURdQ2oiDnX7hMjq/RnX84zAcp2B2wfKZVsX0ZcIqVdmHS5Er4PKqffEVOzq
nf2SU4pAo4q7L7/66TdUtGoRgUSK74O83VTqsb1Lex5roON7unmVsjKyc7dmKUrR
xt2Is4/OsCSZEsErWdMgtqer3fOxG1oGdSHzmgdRwqA22+Im5COTKjOBJ+3MXHaW
E/36FGYYiugOLQn8hrqTqp3MIdPoZe8B/4ZF82qu6qYBQiA3PIHMlfElym5+45oR
fqWLcwids4LV5esHK3YzZdQ3f9+FVIvcBayUUx71ZCD0QkNDUzTnckb5vTxwF3r1
zU/jIsv84dvQiTsCMhTxQq+JDY98V544sapa+0k7chwtwpTdeajTHjocECGRKE1E
o5vCWX6gAiJQ/5RtgfBS2DWXrBQNueUsYpBQM9jp2fr6kxK+Hc5MT8JMdZWw7Rb7
1ZDw9PNs8TpByzc=
=7HvB
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit 486408d690 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
Userspace tools like iio-sensor-proxy need to know the proximity level
that should be considered "near". This value is hardware-specific and
can be defined via the devicetree. Allow the driver to export the near
level.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20211125125646.54831-2-nikita@trvn.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This value inidcates the proximity level that should be considered
"close".
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211125125646.54831-1-nikita@trvn.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Most AXPxxx-based reference designs place a 10k NTC thermistor on a
TS pin. axp20x IIO driver now report the voltage of this pin via
additional IIO channel. Add new "ts_v" channel to the channel description.
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Quentin Schulz <foss+kernel@0leil.net>
Link: https://lore.kernel.org/r/20211118141233.247907-3-boger@wirenboard.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Most AXPxxx-based reference designs place a 10k NTC thermistor on a
TS pin. When appropriately configured, AXP PMICs will inject fixed
current (80uA by default) into TS pin and measure the voltage across a
thermistor. The PMIC itself will by default compare this voltage with
predefined thresholds and disable battery charging whenever
the battery is too hot or too cold.
Alternatively, the TS pin can be configured as general-purpose
ADC input. This mode is not supported by the driver.
This patch allows reading the voltage on the TS pin. It can be then
either processed by userspace or used by kernel consumer like hwmon
ntc thermistor driver.
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Quentin Schulz <foss+kernel@0leil.net>
Link: https://lore.kernel.org/r/20211118141233.247907-2-boger@wirenboard.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable/disable internal i2c controller slave autoprobing at bootstrap.
Disable sensor-hub is useful if i2c controller clock/data lines are
connected through a pull-up with other chip lines (e.g. SDO/SA0).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/54287a93922ac839501b776d288cc368aa81f0ab.1636816719.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce the capability to disable sensorhub through a device-tree
property since there are some configurations where users want to
explicitly disable sensor-hub auto-probing at bootstrap.
A typical configuration is when the sensorhub clock/data lines are connected
to a pull-up resistor since no slave sensors are connected to the i2c master.
If SDO/SA0 line is connected to the same pull-up resistor, when the driver
tries to probe slave devices connected on sensor-hub, it will force SDO/SA0
line to low, modifying the device i2c address.
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/ad7894e7b1c6fb3427fab3f623bb942860ad45cf.1636816719.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the fact that using the trampoline_pgd will result in the
creation of global TLB entries in the user range of the address
space.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211202153226.22946-2-joro@8bytes.org
One of the more frequent data races reported by KCSAN is the racy read
in mutex_spin_on_owner(), which is usually reported as "race of unknown
origin" without showing the writer. This is due to the racing write
occurring in kernel/sched. Locally enabling KCSAN in kernel/sched shows:
| write (marked) to 0xffff97f205079934 of 4 bytes by task 316 on cpu 6:
| finish_task kernel/sched/core.c:4632 [inline]
| finish_task_switch kernel/sched/core.c:4848
| context_switch kernel/sched/core.c:4975 [inline]
| __schedule kernel/sched/core.c:6253
| schedule kernel/sched/core.c:6326
| schedule_preempt_disabled kernel/sched/core.c:6385
| __mutex_lock_common kernel/locking/mutex.c:680
| __mutex_lock kernel/locking/mutex.c:740 [inline]
| __mutex_lock_slowpath kernel/locking/mutex.c:1028
| mutex_lock kernel/locking/mutex.c:283
| tty_open_by_driver drivers/tty/tty_io.c:2062 [inline]
| ...
|
| read to 0xffff97f205079934 of 4 bytes by task 322 on cpu 3:
| mutex_spin_on_owner kernel/locking/mutex.c:370
| mutex_optimistic_spin kernel/locking/mutex.c:480
| __mutex_lock_common kernel/locking/mutex.c:610
| __mutex_lock kernel/locking/mutex.c:740 [inline]
| __mutex_lock_slowpath kernel/locking/mutex.c:1028
| mutex_lock kernel/locking/mutex.c:283
| tty_open_by_driver drivers/tty/tty_io.c:2062 [inline]
| ...
|
| value changed: 0x00000001 -> 0x00000000
This race is clearly intentional, and the potential for miscompilation
is slim due to surrounding barrier() and cpu_relax(), and the value
being used as a boolean.
Nevertheless, marking this reader would more clearly denote intent and
make it obvious that concurrency is expected. Use READ_ONCE() to avoid
having to reason about compiler optimizations now and in future.
With previous refactor, mark the read to owner->on_cpu in owner_on_cpu(),
which immediately precedes the loop executing mutex_spin_on_owner().
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211203075935.136808-3-wangkefeng.wang@huawei.com
Move the owner_on_cpu() from kernel/locking/rwsem.c into
include/linux/sched.h with under CONFIG_SMP, then use it
in the mutex/rwsem/rtmutex to simplify the code.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211203075935.136808-2-wangkefeng.wang@huawei.com
The ww-mutex selftest operates directly on ww_mutex::base and assumes
its type is struct mutex. This isn't true on PREEMPT_RT which turns the
mutex into a rtmutex.
Add a ww_mutex_base_ abstraction which maps to the relevant mutex_ or
rt_mutex_ function.
Change the CONFIG_DEBUG_MUTEXES ifdef to DEBUG_WW_MUTEXES. The latter is
true for the MUTEX and RTMUTEX implementation of WW-MUTEX. The
assignment is required in order to pass the tests.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211129174654.668506-10-bigeasy@linutronix.de
The softirq context on PREEMPT_RT is different compared to !PREEMPT_RT.
As such lockdep_softirq_enter() is a nop and the all the "softirq safe"
tests fail on PREEMPT_RT because there is no difference.
Skip the softirq context tests on PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211129174654.668506-9-bigeasy@linutronix.de
The tests with unbalanced lock() + unlock() operation leave a modified
preemption counter behind which is then reset to its original value
after the test.
The spin_lock() function on PREEMPT_RT does not include a
preempt_disable() statement but migrate_disable() and read_rcu_lock().
As a consequence both counter never get back to their original value
and the system explodes later after the selftest. In the
double-unlock case on PREEMPT_RT, the migrate_disable() and RCU code
will trigger a warning which should be avoided. These counter should
not be decremented below their initial value.
Save both counters and bring them back to their original value after
the test. In the double-unlock case, increment both counter in
advance to they become balanced after the double unlock.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211129174654.668506-8-bigeasy@linutronix.de
The local_lock related functions
local_lock_acquire()
local_lock_release()
are part of the internal implementation and should be avoided.
Define the lock as DEFINE_PER_CPU so the normal local_lock() function
can be used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211129174654.668506-7-bigeasy@linutronix.de
