Commit graph

1,089,026 commits

Author SHA1 Message Date
Neil Armstrong
8a38a4d51c mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
The memory at the end of the controller only accepts 32bit read/write
accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit
(which will be split into two 32bit access) and 8bit leading to incomplete
copies to/from this memory when the buffer is not multiple of 8bytes.

Add a local copy using writel/readl accesses to make sure we use the right
memory access width.

The switch to memcpy_to/fromio was done because of 285133040e
("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy
worked before since it mainly used 32bit memory acceses.

Fixes: 103a5348c2 ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210928073652.434690-1-narmstrong@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06 17:23:28 +02:00
Claudiu Beznea
30d4b990ec mmc: sdhci-of-at91: replace while loop with read_poll_timeout
Replace while loop with read_poll_timeout().

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210924082851.2132068-3-claudiu.beznea@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06 17:23:27 +02:00
Claudiu Beznea
af467fad78 mmc: sdhci-of-at91: wait for calibration done before proceed
Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN
bit will be cleared. No commands should be send before calibration is
done.

Fixes: dbdea70f71 ("mmc: sdhci-of-at91: fix CALCR register being rewritten")
Fixes: 727d836a37 ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210924082851.2132068-2-claudiu.beznea@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06 17:23:27 +02:00
Colin Ian King
9cbfc51af0 qed: Fix spelling mistake "ctx_bsaed" -> "ctx_based"
There is a spelling mistake in a DP_VERBOSE message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:25:04 +01:00
Dan Carpenter
9b139a3801 mlxsw: spectrum_buffers: silence uninitialized warning
Static checkers and runtime checkers such as KMSan will complain that
we do not initialize the last 6 bytes of "cb_priv".  The caller only
uses the first two bytes so it doesn't cause a runtime issue.  Still
worth fixing though.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:23:02 +01:00
Marcel Ziswiler
a50a059523 dt-bindings: net: dsa: marvell: fix compatible in example
While the MV88E6390 switch chip exists, one is supposed to use a
compatible of "marvell,mv88e6190" for it. Fix this in the given example.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Fixes: a3c53be55c ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:20:40 +01:00
Gyeongun Kang
5b71131b79 gtp: use skb_dst_update_pmtu_no_confirm() instead of direct call
skb_dst_update_pmtu_no_confirm() is a just wrapper function of
->update_pmtu(). So, it doesn't change logic

Signed-off-by: Gyeongun Kang <kyeongun15@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:19:37 +01:00
Jean Sacren
fe5d8bd3d3 net: tg3: fix obsolete check of !err
The err variable is checked for true or false a few lines above.  When
!err is checked again, it always evaluates to true.  Therefore we should
skip this check.

We should also group the adjacent statements together for readability.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:17:28 +01:00
Shannon Nelson
3707428dda ionic: move filter sync_needed bit set
Move the setting of the filter-sync-needed bit to the error
case in the filter add routine to be sure we're checking the
live filter status rather than a copy of the pre-sync status.

Fixes: 969f843946 ("ionic: sync the filters in the work task")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:15:05 +01:00
Eric Dumazet
17c37d748f gve: report 64bit tx_bytes counter from gve_handle_report_stats()
Each tx queue maintains a 64bit counter for bytes, there is
no reason to truncate this to 32bit (or this has not been
documented)

Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yangchun Fu <yangchun@google.com>
Cc: Kuo Zhao <kuozhao@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:11:51 +01:00
Eric Dumazet
2f57d4975f gve: fix gve_get_stats()
gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry()
returns true.

What is needed here is to sample values in temporary variables,
and only use them after each loop is ended.

Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Catherine Sullivan <csully@google.com>
Cc: Sagi Shahar <sagis@google.com>
Cc: Jon Olson <jonolson@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Luigi Rizzo <lrizzo@google.com>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Tao Liu <xliutaox@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:11:51 +01:00
Eric Dumazet
d343679919 rtnetlink: fix if_nlmsg_stats_size() under estimation
rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure.

nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags);

But if_nlmsg_stats_size() never considered the needed storage.

This bug did not show up because alloc_skb(X) allocates skb with
extra tailroom, because of added alignments. This could very well
be changed in the future to have deterministic behavior.

Fixes: 10c9ead9f3 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:09:46 +01:00
David S. Miller
6c601aac49 Merge branch 'RTL8366RB-enhancements'
Linus Walleij says:

====================
RTL8366RB enhancements

This patch set is a set of reasonably mature improvements
for the RTL8366RB switch, implemented after Vladimir
challenged me to dig deeper into the switch functions.

ChangeLog v4->v5:
- Drop dubious flood control patch: these registers probably
  only deal with rate limiting, we will deal with this
  another time if we can figure it out.

ChangeLog -> v4:
- Rebase earlier circulated patches on the now merged
  VLAN set-up cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:08:12 +01:00
Linus Walleij
e674cfd085 net: dsa: rtl8366rb: Support setting STP state
This adds support for setting the STP state to the RTL8366RB
DSA switch. This rids the following message from the kernel on
e.g. OpenWrt:

DSA: failed to set STP state 3 (-95)

Since the RTL8366RB has one STP state register per FID with
two bit per port in each, we simply loop over all the FIDs
and set the state on all of them.

Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:08:12 +01:00
Linus Walleij
1fbd19e10b net: dsa: rtl8366rb: Support fast aging
This implements fast aging per-port using the special "security"
register, which will flush any learned L2 LUT entries on a port.

The vendor API just enabled setting and clearing this bit, so
we set it to age out any entries on the port and then we clear
it again.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:08:11 +01:00
Linus Walleij
56d8bb71a8 net: dsa: rtl8366rb: Support disabling learning
The RTL8366RB hardware supports disabling learning per-port
so let's make use of this feature. Rename some unfortunately
named registers in the process.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:08:11 +01:00
Catherine Sullivan
d4b111fda6 gve: Properly handle errors in gve_assign_qpl
Ignored errors would result in crash.

Fixes: ede3fcf5ec ("gve: Add support for raw addressing to the rx path")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:04:26 +01:00
Tao Liu
922aa9bcac gve: Avoid freeing NULL pointer
Prevent possible crashes when cleaning up after unsuccessful
initializations.

Fixes: 893ce44df5 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Tao Liu <xliutaox@google.com>
Signed-off-by: Catherine Sully <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:04:26 +01:00
Catherine Sullivan
d03477ee10 gve: Correct available tx qpl check
The qpl_map_size is rounded up to a multiple of sizeof(long), but the
number of qpls doesn't have to be.

Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 15:04:26 +01:00
Werner Sembach
dd6dd6e3c7 ALSA: hda/realtek: Add quirk for TongFang PHxTxX1
This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This
fixes the issue of the internal Microphone not working after booting
another OS.

When booting a certain another OS this barebone keeps some coeff settings
even after a cold shutdown. These coeffs prevent the microphone detection
from working in Linux, making the Laptop think that there is always an
external microphone plugged-in and therefore preventing the use of the
internal one.

The relevant indexes and values where gathered by naively diff-ing and
reading a working and a non-working coeff dump.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-06 15:59:29 +02:00
Andrii Nakryiko
9d05787223 selftests/bpf: Test new btf__add_btf() API
Add a test that validates that btf__add_btf() API is correctly copying
all the types from the source BTF into destination BTF object and
adjusts type IDs and string offsets properly.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211006051107.17921-4-andrii@kernel.org
2021-10-06 15:36:30 +02:00
Andrii Nakryiko
c65eb8082d selftests/bpf: Refactor btf_write selftest to reuse BTF generation logic
Next patch will need to reuse BTF generation logic, which tests every
supported BTF kind, for testing btf__add_btf() APIs. So restructure
existing selftests and make it as a single subtest that uses bulk
VALIDATE_RAW_BTF() macro for raw BTF dump checking.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211006051107.17921-3-andrii@kernel.org
2021-10-06 15:36:29 +02:00
Andrii Nakryiko
7ca6112159 libbpf: Add API that copies all BTF types from one BTF object to another
Add a bulk copying api, btf__add_btf(), that speeds up and simplifies
appending entire contents of one BTF object to another one, taking care
of copying BTF type data, adjusting resulting BTF type IDs according to
their new locations in the destination BTF object, as well as copying
and deduplicating all the referenced strings and updating all the string
offsets in new BTF types as appropriate.

This API is intended to be used from tools that are generating and
otherwise manipulating BTFs generically, such as pahole. In pahole's
case, this API is useful for speeding up parallelized BTF encoding, as
it allows pahole to offload all the intricacies of BTF type copying to
libbpf and handle the parallelization aspects of the process.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/bpf/20211006051107.17921-2-andrii@kernel.org
2021-10-06 15:35:46 +02:00
Jie Meng
57a610f1c5 bpf, x64: Save bytes for DIV by reducing reg copies
Instead of unconditionally performing push/pop on %rax/%rdx in case of
division/modulo, we can save a few bytes in case of destination register
being either BPF r0 (%rax) or r3 (%rdx) since the result is written in
there anyway.

Also, we do not need to copy the source to %r11 unless the source is either
%rax, %rdx or an immediate.

For example, before the patch:

  22:   push   %rax
  23:   push   %rdx
  24:   mov    %rsi,%r11
  27:   xor    %edx,%edx
  29:   div    %r11
  2c:   mov    %rax,%r11
  2f:   pop    %rdx
  30:   pop    %rax
  31:   mov    %r11,%rax

After:

  22:   push   %rdx
  23:   xor    %edx,%edx
  25:   div    %rsi
  28:   pop    %rdx

Signed-off-by: Jie Meng <jmeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211002035626.2041910-1-jmeng@fb.com
2021-10-06 15:24:36 +02:00
Jiang Wang
d0c6416bd7 unix: Fix an issue in unix_shutdown causing the other end read/write failures
Commit 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap") sets
unix domain socket peer state to TCP_CLOSE in unix_shutdown. This could
happen when the local end is shutdown but the other end is not. Then,
the other end will get read or write failures which is not expected.
Fix the issue by setting the local state to shutdown.

Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Reported-by: Casey Schaufler <casey@schaufler-ca.com>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211004232530.2377085-1-jiang.wang@bytedance.com
2021-10-06 14:40:21 +02:00
Lucas Stach
926e57c065 soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
This adds the description for the i.MX8MM disp blk-ctrl.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-06 20:13:51 +08:00
Lucas Stach
2684ac05a8 soc: imx: add i.MX8M blk-ctrl driver
This adds a driver for the blk-ctrl blocks found in the i.MX8M* line of
SoCs. The blk-ctrl is a top-level peripheral located in the various *MIX
power domains and interacts with the GPC power controller to provide the
peripherals in the power domain access to the NoC and ensures that those
peripherals are properly reset when their respective power domain is
brought back to life.

Software needs to do different things to make the bus handshake happen
after the GPC *MIX domain is powered up and before it is powered down.
As the requirements are quite different between the various blk-ctrls
there is a callback function provided to hook in the proper sequence.

The peripheral domains are quite uniform, they handle the soft clock
enables and resets in the blk-ctrl address space and sequencing with the
upstream GPC power domains.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-06 20:13:47 +08:00
Lucas Stach
da4112230f soc: imx: gpcv2: support system suspend/resume
Our usage of runtime PM to control the hierarchy of power domains is
slightly unusual and means that powering up a domain may fail in early
system resume, as runtime PM is still disallowed at this stage.

However the system suspend/resume path takes care of powering down/up
the power domains in the order defined by the device parent/child and
power-domain provider/consumer hierarachy. So we can just runtime
resume all our power-domain devices to allow the power-up to work
properly in the resume path. System suspend will still disable all
domains as intended.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-06 20:13:45 +08:00
Lucas Stach
656ade7aa4 soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
Annotate the domains with bus clocks to keep those clocks enabled
as long as the domain is active.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-06 20:13:42 +08:00
Lucas Stach
18c98573a4 soc: imx: gpcv2: add domain option to keep domain clocks enabled
Some of the MIX domains are using clocks to drive the bus bridges. Those
must be enabled at all times, as long as the domain is powered up and
they don't have any other consumer than the power domain. Add an option
to keep the clocks attached to a domain enabled as long as the domain
is power up and only disable them after the domain is powered down.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-06 20:13:39 +08:00
Lucas Stach
fadf79a07b soc: imx: gpcv2: add lockdep annotation
Some of the GPCv2 power domains are nested inside each other without
visibility to lockdep at the genpd level, as they are in separate
driver instances and don't have a parent/child power-domain relationship.

Add a subclass annotation to the nested domains to let lockdep know that
it is okay to take the genpd lock in a nested fashion.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-06 20:13:23 +08:00
Andy Shevchenko
95a13ee858 hyper-v: Replace uuid.h with types.h
There is no user of anything in uuid.h in the hyperv.h. Replace it with
more appropriate types.h.

Fixes: f081bbb3fd ("hyper-v: Remove internal types from UAPI header")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/20211001135544.1823-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-10-06 12:05:51 +00:00
Dmitry Baryshkov
1518496578
drm/bridge/lontium-lt9611uxc: fix provided connector suport
- set DRM_CONNECTOR_POLL_HPD as the connector will generate hotplug
  events on its own

- do not call drm_kms_helper_hotplug_event() unless mode_config.funcs
  pointer is not NULL to remove possible kernel oops.

Fixes: bc6fa8676e ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708230329.395976-1-dmitry.baryshkov@linaro.org
2021-10-06 13:59:08 +02:00
Joel Stanley
396c84bbfd ipmi: bt-bmc: Use registers directly
This driver was originally written to use the regmap abstraction with no
clear benefit. As the registers are always mmio and there is no sharing
of the region with other devices, we can safely read and write without
the locking that regmap provides.

This reduces the code size of the driver by about 25%.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210903051039.307991-1-joel@jms.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-10-06 06:53:37 -05:00
Andy Shevchenko
6fda593f30 gpio: mockup: Convert to use software nodes
The gpio-mockup driver creates the properties that are shared between
platform and GPIO devices. Because of that, the properties may not
be removed at the proper point of time without provoking a use-after-free
as shown in the following backtrace:

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120
  ...
  Call Trace:
  kobject_put+0xdc/0xf0
  software_node_notify_remove+0xa8/0xc0
  device_del+0x15a/0x3e0

That's why the driver has to manage the lifetime of the software nodes
by itself.

The problem originates from the old device_add_properties() API, but
has been only revealed after the commit bd1e336aa8 ("driver core: platform:
Remove platform_device_add_properties()"). Hence, it's used as a landmark
for backporting.

Fixes: bd1e336aa8 ("driver core: platform: Remove platform_device_add_properties()")
Reported-by: Kent Gibson <warthog618@gmail.com>
Tested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: tweaked local variable placement]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-06 13:04:04 +02:00
Andy Shevchenko
55a9968c7e gpio: pca953x: Improve bias setting
The commit 15add06841 ("gpio: pca953x: add ->set_config implementation")
introduced support for bias setting. However this, due to being half-baked,
brought potential issues:
 - the turning bias via disabling makes the pin floating for a while;
 - once enabled, bias can't be disabled.

Fix all these by adding support for bias disabling and move the disabling
part under the corresponding conditional.

While at it, add support for default setting, since it's cheap to add.

Fixes: 15add06841 ("gpio: pca953x: add ->set_config implementation")
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-06 13:01:45 +02:00
Mark Brown
be44918383 gpio: 74x164: Add SPI device ID table
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-06 13:01:45 +02:00
David S. Miller
9997080df0 Merge branch 'stmmac-eee-fix'
Wong Vee Khee says:

====================
net: stmmac: Turn off EEE on MAC link down

This patch series ensure PCS EEE is turned off on the event of MAC
link down.

Tested on Intel AlderLake-S (STMMAC + MaxLinear GPY211 PHY).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 11:18:27 +01:00
Wong Vee Khee
d4aeaed80b net: stmmac: trigger PCS EEE to turn off on link down
The current implementation enable PCS EEE feature in the event of link
up, but PCS EEE feature is not disabled on link down.

This patch makes sure PCE EEE feature is disabled on link down.

Fixes: 656ed8b015 ("net: stmmac: fix EEE init issue when paired with EEE capable PHYs")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 11:18:27 +01:00
Wong Vee Khee
590df78bc7 net: pcs: xpcs: fix incorrect steps on disable EEE
When Energy-Efficient Ethernet(EEE) is disable from the MAC side,
we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1
register.

Fixes: 7617af3d1a ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06 11:18:27 +01:00
Cristian Marussi
bf1acf809d firmware: arm_scmi: Add proper barriers to scmi virtio device
Only one single SCMI Virtio device is currently supported by this driver
and it is referenced using a static global variable which is initialized
once for all during probing and nullified at virtio device removal.

Add proper SMP barriers to protect accesses to such device reference to
ensure that the initialzation state of such device is correctly observed by
all PEs at any time.

Return -EBUSY, instead of -EINVAL, and a descriptive error message if more
than one SCMI Virtio device is ever found and probed.

Link: https://lore.kernel.org/r/20210916103336.7243-3-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-06 11:12:45 +01:00
Cristian Marussi
a14a14595d firmware: arm_scmi: Simplify spinlocks in virtio transport
Remove unneeded nested irqsave/irqrestore spinlocks.
Add also a few descriptive comments to explain better the system behaviour
at shutdown time.

Link: https://lore.kernel.org/r/20210916103336.7243-2-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-06 11:12:44 +01:00
Borislav Petkov
f96b467583 x86/insn: Use get_unaligned() instead of memcpy()
Use get_unaligned() instead of memcpy() to access potentially unaligned
memory, which, when accessed through a pointer, leads to undefined
behavior. get_unaligned() describes much better what is happening there
anyway even if memcpy() does the job.

In addition, since perf tool builds with -Werror, it would fire with:

  util/intel-pt-decoder/../../../arch/x86/lib/insn.c: In function '__insn_get_emulate_prefix':
  tools/include/../include/asm-generic/unaligned.h:10:15: error: packed attribute is unnecessary [-Werror=packed]
     10 |  const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \

because -Werror=packed would complain if the packed attribute would have
no effect on the layout of the structure.

In this case, that is intentional so disable the warning only for that
compilation unit.

That part is Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>

No functional changes.

Fixes: 5ba1071f75 ("x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/YVSsIkj9Z29TyUjE@zn.tnic
2021-10-06 11:56:37 +02:00
Tony Lindgren
e60150de94 ARM: OMAP2+: Drop unused CM defines for am3
These are unused and should be handled by drivers/clock/ti nowadays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:36:23 +03:00
Tony Lindgren
d8b2feb9df ARM: OMAP2+: Drop unused CM and SCRM defines for omap4
These are unused and should be handled by drivers/clock/ti nowadays.

Note that we also drop some unused SCRM registers that are not clock
related.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:36:22 +03:00
Tony Lindgren
614c55898a ARM: OMAP2+: Drop unused CM and SCRM defines for omap5
These are unused and should be handled by drivers/clock/ti nowadays.

Note that we also drop some unused SCRM registers that are not clock
related.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:36:22 +03:00
Tony Lindgren
1f62a5ac49 ARM: OMAP2+: Drop unused CM defines for dra7
These are unused and should be handled by drivers/clock/ti nowadays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:36:22 +03:00
Tony Lindgren
6284410ab9 ARM: OMAP2+: Drop unused PRM defines for am3
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:36:21 +03:00
Tony Lindgren
0681ea3084 ARM: OMAP2+: Drop unused PRM defines for am4
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:34:55 +03:00
Tony Lindgren
c33ff4c864 ARM: OMAP2+: Drop unused PRM defines for omap4
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 12:23:28 +03:00