Commit graph

1,089,026 commits

Author SHA1 Message Date
Tony Lindgren
1b1da99b84 bus: ti-sysc: Fix variable set but not used warning for reinit_modules
Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not
used introduced by commit 9d88136120 ("bus: ti-sysc: Add quirk handling
for reinit on context lost").

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 08:38:09 +03:00
Namjae Jeon
3639999011 ksmbd: add the check to vaildate if stream protocol length exceeds maximum value
This patch add MAX_STREAM_PROT_LEN macro and check if stream protocol
length exceeds maximum value. opencode pdu size check in
ksmbd_pdu_size_has_room().

Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-06 00:23:00 -05:00
Roger Quadros
80d680fdcc ARM: dts: omap3430-sdp: Fix NAND device node
Nand is on CS1 so reg properties first field should be 1 not 0.

Fixes: 44e4716499 ("ARM: dts: omap3: Fix NAND device nodes")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 08:05:08 +03:00
Tony Lindgren
b13a270ace bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
Commit 94f6345712 ("bus: ti-sysc: Implement quirk handling for
CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in
addition to dcan2 for errata i893 handling.

Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods"
dts property is used with related dcan hwmod data. This should be only
needed if anybody needs to git bisect earlier stable trees though.

Fixes: 94f6345712 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06 08:01:13 +03:00
Tony Lindgren
e700ac213a Merge branch 'pruss-fix' into fixes
Merge in a fix for pruss reset issue caused by enabling pruss for am335x.
2021-10-06 07:55:44 +03:00
Andrey Ignatov
0640c77c46 bpf: Avoid retpoline for bpf_for_each_map_elem
Similarly to 09772d92cd ("bpf: avoid retpoline for
lookup/update/delete calls on maps") and 84430d4232 ("bpf, verifier:
avoid retpoline for map push/pop/peek operation") avoid indirect call
while calling bpf_for_each_map_elem.

Before (a program fragment):

  ; if (rules_map) {
   142: (15) if r4 == 0x0 goto pc+8
   143: (bf) r3 = r10
  ; bpf_for_each_map_elem(rules_map, process_each_rule, &ctx, 0);
   144: (07) r3 += -24
   145: (bf) r1 = r4
   146: (18) r2 = subprog[+5]
   148: (b7) r4 = 0
   149: (85) call bpf_for_each_map_elem#143680  <-- indirect call via
                                                    helper

After (same program fragment):

   ; if (rules_map) {
    142: (15) if r4 == 0x0 goto pc+8
    143: (bf) r3 = r10
   ; bpf_for_each_map_elem(rules_map, process_each_rule, &ctx, 0);
    144: (07) r3 += -24
    145: (bf) r1 = r4
    146: (18) r2 = subprog[+5]
    148: (b7) r4 = 0
    149: (85) call bpf_for_each_array_elem#170336  <-- direct call

On a benchmark that calls bpf_for_each_map_elem() once and does many
other things (mostly checking fields in skb) with CONFIG_RETPOLINE=y it
makes program faster.

Before:

  ============================================================================
  Benchmark.cpp                                              time/iter iters/s
  ============================================================================
  IngressMatchByRemoteEndpoint                                80.78ns 12.38M
  IngressMatchByRemoteIP                                      80.66ns 12.40M
  IngressMatchByRemotePort                                    80.87ns 12.37M

After:

  ============================================================================
  Benchmark.cpp                                              time/iter iters/s
  ============================================================================
  IngressMatchByRemoteEndpoint                                73.49ns 13.61M
  IngressMatchByRemoteIP                                      71.48ns 13.99M
  IngressMatchByRemotePort                                    70.39ns 14.21M

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211006001838.75607-1-rdna@fb.com
2021-10-05 19:22:33 -07:00
Douglas Anderson
e7bd95a7ed drm/edid: Fix crash with zero/invalid EDID
In the commit bac9c29482 ("drm/edid: Break out reading block 0 of
the EDID") I broke out reading the base block of the EDID to its own
function. Unfortunately, when I did that I messed up the handling when
drm_edid_is_zero() indicated that we had an EDID that was all 0x00 or
when we went through 4 loops and didn't get a valid EDID. Specifically
I needed to pass the broken EDID to connector_bad_edid() but now I was
passing an error-pointer.

Let's re-jigger things so we can pass the bad EDID in properly.

Fixes: bac9c29482 ("drm/edid: Break out reading block 0 of the EDID")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004092100.1.Ic90a5ebd44c75db963112be167a03cc96f9fb249@changeid
2021-10-05 19:18:54 -07:00
Stephen Rothwell
bcb2293d81 ethernet: fix up ps3_gelic_net.c for "ethernet: use eth_hw_addr_set()"
Another case needing a u8 * cast.

Fixes: a96d317fb1 ("ethernet: use eth_hw_addr_set()")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20211006122315.4e04fb87@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-05 18:52:16 -07:00
David Bauer
fada2ce093 net: phy: at803x: add QCA9561 support
Add support for the embedded fast-ethernet PHY found on the QCA9561
WiSoC platform. It supports the usual Atheros PHY featureset including
the cable tester.

Tested on a Xiaomi MiRouter 4Q (QCA9561)

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20211005225401.10653-1-mail@david-bauer.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-05 18:14:43 -07:00
Alexei Starovoitov
32a16f6bfe Merge branch 'Support kernel module function calls from eBPF'
Kumar Kartikeya says:

====================

This set enables kernel module function calls, and also modifies verifier logic
to permit invalid kernel function calls as long as they are pruned as part of
dead code elimination. This is done to provide better runtime portability for
BPF objects, which can conditionally disable parts of code that are pruned later
by the verifier (e.g. const volatile vars, kconfig options). libbpf
modifications are made along with kernel changes to support module function
calls.

It also converts TCP congestion control objects to use the module kfunc support
instead of relying on IS_BUILTIN ifdef.

Changelog:
----------
v6 -> v7
v6: https://lore.kernel.org/bpf/20210930062948.1843919-1-memxor@gmail.com

 * Let __bpf_check_kfunc_call take kfunc_btf_id_list instead of generating
   callbacks (Andrii)
 * Rename it to bpf_check_mod_kfunc_call to reflect usage
 * Remove OOM checks (Alexei)
 * Remove resolve_btfids invocation for bpf_testmod (Andrii)
 * Move fd_array_cnt initialization near fd_array alloc (Andrii)
 * Rename helper to btf_find_by_name_kind and pass start_id (Andrii)
 * memset when data is NULL in add_data (Alexei)
 * Fix other nits

v5 -> v6
v5: https://lore.kernel.org/bpf/20210927145941.1383001-1-memxor@gmail.com

 * Rework gen_loader relocation emits
   * Only emit bpf_btf_find_by_name_kind call when required (Alexei)
   * Refactor code to emit ksym var and func relo into separate helpers, this
     will be easier to add future weak/typeless ksym support to (for my followup)
   * Count references for both ksym var and funcs, and avoid calling helpers
     unless required for both of them. This also means we share fds between
     ksym vars for the module BTFs. Also be careful with this when closing
     BTF fd so that we only close one instance of the fd for each ksym

v4 -> v5
v4: https://lore.kernel.org/bpf/20210920141526.3940002-1-memxor@gmail.com

 * Address comments from Alexei
   * Use reserved fd_array area in loader map instead of creating a new map
   * Drop selftest testing the 256 kfunc limit, however selftest testing reuse
     of BTF fd for same kfunc in gen_loader and libbpf is kept
 * Address comments from Andrii
   * Make --no-fail the default for resolve_btfids, i.e. only fail if we find
     BTF section and cannot process it
   * Use obj->btf_modules array to store index in the fd_array, so that we don't
     have to do any searching to reuse the index, instead only set it the first
     time a module BTF's fd is used
   * Make find_ksym_btf_id to return struct module_btf * in last parameter
   * Improve logging when index becomes bigger than INT16_MAX
   * Add btf__find_by_name_kind_own internal helper to only start searching for
     kfunc ID in module BTF, since find_ksym_btf_id already checks vmlinux BTF
     before iterating over module BTFs.
   * Fix various other nits
 * Fixes for failing selftests on BPF CI
 * Rearrange/cleanup selftests
   * Avoid testing kfunc limit (Alexei)
   * Do test gen_loader and libbpf BTF fd index dedup with 256 calls
   * Move invalid kfunc failure test to verifier selftest
   * Minimize duplication
 * Use consistent bpf_<type>_check_kfunc_call naming for module kfunc callback
 * Since we try to add fd using add_data while we can, cherry pick Alexei's
   patch from CO-RE RFC series to align gen_loader data.

v3 -> v4
v3: https://lore.kernel.org/bpf/20210915050943.679062-1-memxor@gmail.com

 * Address comments from Alexei
   * Drop MAX_BPF_STACK change, instead move map_fd and BTF fd to BPF array map
     and pass fd_array using BPF_PSEUDO_MAP_IDX_VALUE
 * Address comments from Andrii
   * Fix selftest to store to variable for observing function call instead of
     printk and polluting CI logs
 * Drop use of raw_tp for testing, instead reuse classifier based prog_test_run
 * Drop index + 1 based insn->off convention for kfunc module calls
 * Expand selftests to cover more corner cases
 * Misc cleanups

v2 -> v3
v2: https://lore.kernel.org/bpf/20210914123750.460750-1-memxor@gmail.com

 * Fix issues pointed out by Kernel Test Robot
 * Fix find_kfunc_desc to also take offset into consideration when comparing

RFC v1 -> v2
v1: https://lore.kernel.org/bpf/20210830173424.1385796-1-memxor@gmail.com

 * Address comments from Alexei
   * Reuse fd_array instead of introducing kfunc_btf_fds array
   * Take btf and module reference as needed, instead of preloading
   * Add BTF_KIND_FUNC relocation support to gen_loader infrastructure
 * Address comments from Andrii
   * Drop hashmap in libbpf for finding index of existing BTF in fd_array
   * Preserve invalid kfunc calls only when the symbol is weak
 * Adjust verifier selftests
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-10-05 17:07:42 -07:00
Kumar Kartikeya Dwivedi
c48e51c8b0 bpf: selftests: Add selftests for module kfunc support
This adds selftests that tests the success and failure path for modules
kfuncs (in presence of invalid kfunc calls) for both libbpf and
gen_loader. It also adds a prog_test kfunc_btf_id_list so that we can
add module BTF ID set from bpf_testmod.

This also introduces  a couple of test cases to verifier selftests for
validating whether we get an error or not depending on if invalid kfunc
call remains after elimination of unreachable instructions.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-10-memxor@gmail.com
2021-10-05 17:07:42 -07:00
Kumar Kartikeya Dwivedi
18f4fccbf3 libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.

For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.

When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.

We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
2021-10-05 17:07:42 -07:00
Kumar Kartikeya Dwivedi
466b2e1397 libbpf: Resolve invalid weak kfunc calls with imm = 0, off = 0
Preserve these calls as it allows verifier to succeed in loading the
program if they are determined to be unreachable after dead code
elimination during program load. If not, the verifier will fail at
runtime. This is done for ext->is_weak symbols similar to the case for
variable ksyms.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-8-memxor@gmail.com
2021-10-05 17:07:42 -07:00
Kumar Kartikeya Dwivedi
9dbe601563 libbpf: Support kernel module function calls
This patch adds libbpf support for kernel module function call support.
The fd_array parameter is used during BPF program load to pass module
BTFs referenced by the program. insn->off is set to index into this
array, but starts from 1, because insn->off as 0 is reserved for
btf_vmlinux.

We try to use existing insn->off for a module, since the kernel limits
the maximum distinct module BTFs for kfuncs to 256, and also because
index must never exceed the maximum allowed value that can fit in
insn->off (INT16_MAX). In the future, if kernel interprets signed offset
as unsigned for kfunc calls, this limit can be increased to UINT16_MAX.

Also introduce a btf__find_by_name_kind_own helper to start searching
from module BTF's start id when we know that the BTF ID is not present
in vmlinux BTF (in find_ksym_btf_id).

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-7-memxor@gmail.com
2021-10-05 17:07:42 -07:00
Kumar Kartikeya Dwivedi
0e32dfc80b bpf: Enable TCP congestion control kfunc from modules
This commit moves BTF ID lookup into the newly added registration
helper, in a way that the bbr, cubic, and dctcp implementation set up
their sets in the bpf_tcp_ca kfunc_btf_set list, while the ones not
dependent on modules are looked up from the wrapper function.

This lifts the restriction for them to be compiled as built in objects,
and can be loaded as modules if required. Also modify Makefile.modfinal
to call resolve_btfids for each module.

Note that since kernel kfunc_ids never overlap with module kfunc_ids, we
only match the owner for module btf id sets.

See following commits for background on use of:

 CONFIG_X86 ifdef:
 569c484f99 (bpf: Limit static tcp-cc functions in the .BTF_ids list to x86)

 CONFIG_DYNAMIC_FTRACE ifdef:
 7aae231ac9 (bpf: tcp: Limit calling some tcp cc functions to CONFIG_DYNAMIC_FTRACE)

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-6-memxor@gmail.com
2021-10-05 17:07:41 -07:00
Kumar Kartikeya Dwivedi
f614f2c755 tools: Allow specifying base BTF file in resolve_btfids
This commit allows specifying the base BTF for resolving btf id
lists/sets during link time in the resolve_btfids tool. The base BTF is
set to NULL if no path is passed. This allows resolving BTF ids for
module kernel objects.

Also, drop the --no-fail option, as it is only used in case .BTF_ids
section is not present, instead make no-fail the default mode. The long
option name is same as that of pahole.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-5-memxor@gmail.com
2021-10-05 17:07:41 -07:00
Kumar Kartikeya Dwivedi
14f267d95f bpf: btf: Introduce helpers for dynamic BTF set registration
This adds helpers for registering btf_id_set from modules and the
bpf_check_mod_kfunc_call callback that can be used to look them up.

With in kernel sets, the way this is supposed to work is, in kernel
callback looks up within the in-kernel kfunc whitelist, and then defers
to the dynamic BTF set lookup if it doesn't find the BTF id. If there is
no in-kernel BTF id set, this callback can be used directly.

Also fix includes for btf.h and bpfptr.h so that they can included in
isolation. This is in preparation for their usage in tcp_bbr, tcp_cubic
and tcp_dctcp modules in the next patch.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-4-memxor@gmail.com
2021-10-05 17:07:41 -07:00
Kumar Kartikeya Dwivedi
a5d8272752 bpf: Be conservative while processing invalid kfunc calls
This patch also modifies the BPF verifier to only return error for
invalid kfunc calls specially marked by userspace (with insn->imm == 0,
insn->off == 0) after the verifier has eliminated dead instructions.
This can be handled in the fixup stage, and skip processing during add
and check stages.

If such an invalid call is dropped, the fixup stage will not encounter
insn->imm as 0, otherwise it bails out and returns an error.

This will be exposed as weak ksym support in libbpf in later patches.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-3-memxor@gmail.com
2021-10-05 17:07:41 -07:00
Kumar Kartikeya Dwivedi
2357672c54 bpf: Introduce BPF support for kernel module function calls
This change adds support on the kernel side to allow for BPF programs to
call kernel module functions. Userspace will prepare an array of module
BTF fds that is passed in during BPF_PROG_LOAD using fd_array parameter.
In the kernel, the module BTFs are placed in the auxilliary struct for
bpf_prog, and loaded as needed.

The verifier then uses insn->off to index into the fd_array. insn->off
0 is reserved for vmlinux BTF (for backwards compat), so userspace must
use an fd_array index > 0 for module kfunc support. kfunc_btf_tab is
sorted based on offset in an array, and each offset corresponds to one
descriptor, with a max limit up to 256 such module BTFs.

We also change existing kfunc_tab to distinguish each element based on
imm, off pair as each such call will now be distinct.

Another change is to check_kfunc_call callback, which now include a
struct module * pointer, this is to be used in later patch such that the
kfunc_id and module pointer are matched for dynamically registered BTF
sets from loadable modules, so that same kfunc_id in two modules doesn't
lead to check_kfunc_call succeeding. For the duration of the
check_kfunc_call, the reference to struct module exists, as it returns
the pointer stored in kfunc_btf_tab.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-2-memxor@gmail.com
2021-10-05 17:07:41 -07:00
Sinthu Raja
f46d16cf5b arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes
Two carveout reserved memory nodes each have been added for each of the
other remote processors devices within the MAIN domain on the TI J721E
SK boards. These nodes are assigned to the respective rproc device nodes
as well. The first region will be used as the DMA pool for the rproc
devices, and the second region will furnish the static carveout regions
for the firmware memory.

An additional reserved memory node is also added to reserve a portion of
the DDR memory to be used for performing inter-processor communication
between all the remote processors running RTOS or baremetal firmwares.
8 MB of memory is reserved for this purpose, and this accounts for all
the vrings and vring buffers between all the possible pairs of remote
processors.

The current carveout addresses and sizes are defined statically for each
rproc device. The R5F processors do not have an MMU, and as such require
the exact memory used by the firmwares to be set-aside. The C71x DSP
processor does support a MMU called CMMU, but is not currently supported
and as such requires the exact memory used by the firmware to be
set-aside. The firmware images do not require any RSC_CARVEOUT entries
in their resource tables to allocate the memory for firmware memory
segments

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-5-sinthu.raja@ti.com
2021-10-05 17:46:40 -05:00
Sinthu Raja
e910e5b676 arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes
Add the sub-mailbox nodes that are used to communicate between MPU and
various remote processors present in the J721E SoCs to the J721E EAIK
board. These include the R5F remote processors in the dual-R5F cluster
(MCU_R5FSS0) in the MCU domain and the two dual-R5F clusters
(MAIN_R5FSS0 & MAIN_R5FSS1) in the MAIN domain; the two C66x DSP remote
processors and the single C71x DSP remote processor in the MAIN domain.
These sub-mailbox nodes utilize the System Mailbox clusters 0 through 4.
All the remaining mailbox clusters are currently not used on A72 core,
and are hence disabled.

The sub-mailbox nodes added match the hard-coded mailbox configuration
used within the TI RTOS IPC software packages. The R5F processor
sub-systems are assumed to be running in Split mode, so a sub-mailbox
node is used by each of the R5F cores. Only the sub-mailbox node for
the first R5F core in each cluster is used in case of a Lockstep mode
for that R5F cluster.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-4-sinthu.raja@ti.com
2021-10-05 17:46:40 -05:00
Sinthu Raja
1bfda92a3a arm64: dts: ti: Add support for J721E SK
J721E Starter Kit (SK)[1] is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display, GPU,
dedicated safety island and security accelerators. The SoC is power
optimized to provide best in class performance for industrial and
automotive applications.

    J721E SK supports the following interfaces:
    * 4 GB LPDDR4 RAM
    * x1 Gigabit Ethernet interface
    * x1 USB 3.0 Type-C port
    * x3 USB 3.0 Type-A ports
    * x1 PCIe M.2 E Key
    * x1 PCIe M.2 M Key
    * 512 Mbit OSPI flash
    * x2 CSI2 Camera interface (RPi and TI Camera connector)
    * 40-pin Raspberry Pi GPIO header

Add basic support for J721E-SK.

[1] https://www.ti.com/tool/SK-TDA4VM

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-3-sinthu.raja@ti.com
2021-10-05 17:46:40 -05:00
Sinthu Raja
2927c9a56e dt-bindings: arm: ti: Add compatible for J721E SK
J721E Starter Kit (SK)[1] is a low cost, small form factor board
designed for TI’s J721E SoC. Add j721e-sk into compatible enum.

[1]https://www.ti.com/tool/SK-TDA4VM

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-2-sinthu.raja@ti.com
2021-10-05 17:46:40 -05:00
Jan Kiszka
614d47cc93 arm64: dts: ti: iot2050: Add support for product generation 2 boards
This adds the devices trees for IOT2050 Product Generation 2 (PG2)
boards. We have Basic and an Advanced variants again, differing in
number of cores, RAM size, availability of eMMC and further details.
The major difference to PG1 is the used silicon revision (SR2.x on
PG2).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/cc868da8264324bde2c87d0c01d4763e3678c706.1632657917.git.jan.kiszka@web.de
2021-10-05 17:46:40 -05:00
Jan Kiszka
a9dbf044c6 arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards
The current IOT2050 devices are Product Generation 1 (PG1), using SR1.0
AM65x silicon. Upcoming PG2 devices will use SR2.x SoCs and will
therefore need separate device trees. Prepare for that by factoring out
common bits that will be shared across both generations.

At this chance, drop a link to the product homepage to in the top-level
dts files. Also fix a typo in my email address in some headers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/31fece05f9728a852c0632985c4fa537cced4ece.1632657917.git.jan.kiszka@web.de
2021-10-05 17:46:40 -05:00
Jan Kiszka
4f535a0e38 dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards
Product Generation 2 (PG2) boards are based on SR2.x SoCs and will be
released soon.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/5d99e69ff1e2fb78f51f03c351eff1fe1f6c3a71.1632657917.git.jan.kiszka@web.de
2021-10-05 17:46:40 -05:00
Jan Kiszka
af755fe2b3 arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores
Analogously to the am654-base-board, configure the mailboxes for the two
R5F cores, add them and the already existing memory carve-outs to the
related MCU nodes. Allows to load applications under Linux onto the
cores, e.g. the RTI watchdog firmware.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1776f8be19b39a938d9248fcfc5332b753783c3e.1632657917.git.jan.kiszka@web.de
2021-10-05 17:46:40 -05:00
Jan Kiszka
262a98b43c arm64: dts: ti: iot2050: Disable SR2.0-only PRUs
The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/189a91866fb1af02e4fd2345dc56774aa069d5ba.1632657917.git.jan.kiszka@web.de
2021-10-05 17:46:40 -05:00
Jan Kiszka
06784f7679 arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices
This ensures that the SD card will remain mmc0 across Basic and Advanced
devices, also avoiding surprises for users coming from the downstream
kernels.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/fe20d6346f119a28e47d129b616682001299cf0e.1632657917.git.jan.kiszka@web.de
2021-10-05 17:46:39 -05:00
Nishanth Menon
2cf3213d23 arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible
Add j7200-evm compatible to the board to allow the board to distinguish
itself from other platforms that may be added in the future.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-5-nm@ti.com
2021-10-05 17:46:39 -05:00
Nishanth Menon
c47eebaf4d arm64: dts: ti: k3-j721e-common-proc-board: Add j721e-evm compatible
Add j721e-evm compatible to the board to allow the board to distinguish
itself from other platforms that are pending to be added.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-4-nm@ti.com
2021-10-05 17:46:39 -05:00
Nishanth Menon
c4d269c955 dt-bindings: arm: ti: Add missing compatibles for j721e/j7200 evms
Add compatibles for j721e and j7200 evms to allow for newer platforms
to distinguish themselves.

While doing this, maintain support for older style of description where
the board compatibility was not required.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-2-nm@ti.com
2021-10-05 17:46:39 -05:00
Nishanth Menon
e94575e1b0 arm64: dts: ti: Makefile: Collate AM64 platforms together
Make sure that the platforms are grouped together per SoC. This helps
keep the Makefile readable as newer platforms get added to the list.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210915121442.27112-1-nm@ti.com
2021-10-05 17:46:39 -05:00
Suman Anna
c9087e3898 arm64: dts: ti: k3-am64-main: Add ICSSG nodes
Add the DT nodes for the ICSSG0 and ICSSG1 processor subsystems that are
present on the K3 AM64x SoCs. The two ICSSGs are identical to each other
for the most part, with some of the peripheral pins from ICSSG1 not pinned
out. Each ICSSG instance is represented by a PRUSS subsystem node and other
child nodes.

The nodes are all added and enabled in the common k3-am64-main.dtsi
file by default. The MDIO nodes need pinctrl lines, and so should be
enabled only on boards where they are actually wired and pinned out
for ICSSG Ethernet. Any new board dts file should disable these if
they are not sure. These are disabled in the existing AM64x board dts
files to begin with.

The ICSSGs on K3 AM64x SoCs are very similar to the versions of the ICSSG
on K3 J721E and AM65x SR2.0 SoCs. The IRAM and BroadSize RAM sizes are all
identical to those on J721E SoCs. All The ICSSG host interrupts intended
towards the main Arm core are also shared with other processors on the SoC,
and can be partitioned as per system integration needs.

The ICSSG subsystem node contains the entire address space. The various
sub-modules of the ICSSG are represented as individual child nodes (so
platform devices themselves) of the PRUSS subsystem node. These include:
 - two Programmable Real-Time Units (PRUs)
 - two auxiliary PRU cores called RTUs
 - two Transmit Programmable Real-Time Units (Tx_PRUs)
 - Interrupt controller (INTC)
 - a 'memories' node containing all the ICSSG level Data RAMs
 - Real Time Media Independent Interface controller (MII_RT)
 - Gigabit capable MII_G_RT
 - ICSSG CFG sub-module providing two internal clock muxes, with the
   default clock parents also assigned using the assigned-clock-parents
   property.

The default names for the firmware images for each PRU, RTU and Tx_PRU
cores are defined as follows using the 'firmware-name' property (these
can be adjusted either in derivative board dts files or through sysfs at
runtime if required):
 ICSSG0 PRU0 Core    : am64x-pru0_0-fw   ; PRU1 Core    : am64x-pru0_1-fw
 ICSSG0 RTU0 Core    : am64x-rtu0_0-fw   ; RTU1 Core    : am64x-rtu0_1-fw
 ICSSG0 Tx_PRU0 Core : am64x-txpru0_0-fw ; Tx_PRU1 Core : am64x-txpru0_1-fw
 ICSSG1 PRU0 Core    : am64x-pru1_0-fw   ; PRU1 Core    : am64x-pru1_1-fw
 ICSSG1 RTU0 Core    : am64x-rtu1_0-fw   ; RTU1 Core    : am64x-rtu1_1-fw
 ICSSG1 Tx_PRU0 Core : am64x-txpru1_0-fw ; Tx_PRU1 Core : am64x-txpru1_1-fw

Note:
1. The ICSSG INTC on AM64x SoCs share all the host interrupts with other
   processors, so use the 'ti,irqs-reserved' property in derivative board
   dts files _if_ any of them should not be handled by the host OS.
2. There are few more sub-modules like the Industrial Ethernet Peripherals
   (IEPs), eCAP, PWM, UART that do not have bindings and so will be added
   in the future.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210919202935.15604-1-s-anna@ti.com
2021-10-05 17:46:39 -05:00
Steven Rostedt (VMware)
8d6e90983a tracing: Create a sparse bitmask for pid filtering
When the trace_pid_list was created, the default pid max was 32768.
Creating a bitmask that can hold one bit for all 32768 took up 4096 (one
page). Having a one page bitmask was not much of a problem, and that was
used for mapping pids. But today, systems are bigger and can run more
tasks, and now the default pid_max is usually set to 4194304. Which means
to handle that many pids requires 524288 bytes. Worse yet, the pid_max can
be set to 2^30 (1073741824 or 1G) which would take 134217728 (128M) of
memory to store this array.

Since the pid_list array is very sparsely populated, it is a huge waste of
memory to store all possible bits for each pid when most will not be set.

Instead, use a page table scheme to store the array, and allow this to
handle up to 30 bit pids.

The pid_mask will start out with 256 entries for the first 8 MSB bits.
This will cost 1K for 32 bit architectures and 2K for 64 bit. Each of
these will have a 256 array to store the next 8 bits of the pid (another
1 or 2K). These will hold an 2K byte bitmask (which will cover the LSB
14 bits or 16384 pids).

When the trace_pid_list is allocated, it will have the 1/2K upper bits
allocated, and then it will allocate a cache for the next upper chunks and
the lower chunks (default 6 of each). Then when a bit is "set", these
chunks will be pulled from the free list and added to the array. If the
free list gets down to a lever (default 2), it will trigger an irqwork
that will refill the cache back up.

On clearing a bit, if the clear causes the bitmask to be zero, that chunk
will then be placed back into the free cache for later use, keeping the
need to allocate more down to a minimum.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-05 17:38:45 -04:00
Steven Rostedt (VMware)
6954e41526 tracing: Place trace_pid_list logic into abstract functions
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.

Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.

The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-05 17:30:08 -04:00
Lukas Bulwahn
a41392e087 MAINTAINERS: rectify entry for CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER
Commit 04647773d6 ("dt-bindings: input: Convert ChipOne ICN8318
binding to a schema") converts chipone_icn8318.txt to chipone,icn8318.yaml,
but missed to adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
a broken reference.

Repair this file reference in CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211005075451.29691-12-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-05 13:34:49 -07:00
Arnd Bergmann
1f59342be6 Input: analog - fix invalid snprintf() call
Overlapping input and output arguments to snprintf() are
undefined behavior in C99:

drivers/input/joystick/analog.c: In function 'analog_name':
drivers/input/joystick/analog.c:428:3: error: 'snprintf' argument 4 overlaps destination object 'analog' [-Werror=restrict]
  428 |   snprintf(analog->name, sizeof(analog->name), "%s %d-hat",
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  429 |     analog->name, hweight16(analog->mask & ANALOG_HATS_ALL));
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/input/joystick/analog.c:420:40: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
  420 | static void analog_name(struct analog *analog)
      |                         ~~~~~~~~~~~~~~~^~~~~~

Change this function to use the simpler seq_buf interface instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927101416.1569609-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-05 13:28:41 -07:00
Lukas Bulwahn
6bf8a55d83 x86: Fix misspelled Kconfig symbols
Fix misspelled Kconfig symbols as detected by
scripts/checkkconfigsymbols.py.

 [ bp: Combine into a single patch. ]

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210803113531.30720-7-lukas.bulwahn@gmail.com
2021-10-05 21:48:30 +02:00
Lukas Bulwahn
3fd3590b53 x86/Kconfig: Remove references to obsolete Kconfig symbols
Remove two symbols referenced in Kconfig which have been removed
previously by:

  ef3c67b645 ("mfd: intel_msic: Remove driver for deprecated platform")
  1b79fc4f2b ("x86/apb_timer: Remove driver for deprecated platform")

Detected by scripts/checkkconfigsymbols.py.

  [ bp: Merge into a single patch. ]

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210803113531.30720-5-lukas.bulwahn@gmail.com
2021-10-05 21:36:58 +02:00
Dan Carpenter
85bb2f6e1c drm/i915/tc: Delete bogus NULL check in intel_ddi_encoder_destroy()
The "digi_port" pointer can't be NULL and we have already dereferenced
it so checking for NULL is not necessary.  Delete the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004103737.GC25015@kili
2021-10-05 22:23:49 +03:00
Guenter Roeck
012e974501 xtensa: xtfpga: Try software restart before simulating CPU reset
Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.

  Kernel panic - not syncing: Unrecoverable error in exception handler

Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.

XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.

Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-10-05 12:19:05 -07:00
Max Filippov
f3d7c2cdf6 xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-10-05 12:19:05 -07:00
Joe Lawrence
fe255fe6ad objtool: Remove redundant 'len' field from struct section
The section structure already contains sh_size, so just remove the extra
'len' member that requires extra mirroring and potential confusion.

Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-3-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
2021-10-05 12:03:21 -07:00
Joe Lawrence
dc02368164 objtool: Make .altinstructions section entry size consistent
Commit e31694e0a7 ("objtool: Don't make .altinstructions writable")
aligned objtool-created and kernel-created .altinstructions section
flags, but there remains a minor discrepency in their use of a section
entry size: objtool sets one while the kernel build does not.

While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small
deviation can cause failures with external tooling (kpatch-build).

Fix this by creating new .altinstructions sections with sh_entsize of 0
and then later updating sec->sh_size as alternatives are added to the
section.  An added benefit is avoiding the data descriptor and buffer
created by elf_create_section(), but previously unused by
elf_add_alternative().

Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-2-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
2021-10-05 12:03:20 -07:00
Josh Poimboeuf
4d8b35968b objtool: Remove reloc symbol type checks in get_alt_entry()
Converting a special section's relocation reference to a symbol is
straightforward.  No need for objtool to complain that it doesn't know
how to handle it.  Just handle it.

This fixes the following warning:

  arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception

Fixes: 24ff652573 ("objtool: Teach get_alt_entry() about more relocation types")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-kernel@vger.kernel.org
2021-10-05 12:03:20 -07:00
Greg Kroah-Hartman
dfffaf0238 FPGA Manager fixes for 5.15
Mark's fix adds a MODULE_DEVICE_TABLE to ensure module autoloading
 works for the Lattice ice-40-spi FPGA Manager driver.
 
 All patches have been reviewed on the mailing list, and have been in the
 last few linux-next releases (as part of my fixes branch) without issues.
 
 Signed-off-by: Moritz Fischer <mdf@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iIUEABYIAC0WIQSdhnt2PwibB65UG0C3mJX/Vsn7uQUCYVyXBQ8cbWRmQGtlcm5l
 bC5vcmcACgkQt5iV/1bJ+7lLHgD+IMeyAxiah+UjtqaqV6Ndn0T1GAGeZwbt4kyL
 hRC7DoUBAP+R8J4Y0A2dngCs96XKMoankCKrVLaDVLNUrv6/CBoM
 =7feO
 -----END PGP SIGNATURE-----

Merge tag 'fpga-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

FPGA Manager fixes for 5.15

Mark's fix adds a MODULE_DEVICE_TABLE to ensure module autoloading
works for the Lattice ice-40-spi FPGA Manager driver.

All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.

Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: ice40-spi: Add SPI device ID table
2021-10-05 20:29:44 +02:00
Andy Shevchenko
286dba65a4 IB/hf1: Use string_upper() instead of an open coded variant
Use string_upper() from the string helper module instead of an	open coded
variant.

Link: https://lore.kernel.org/r/20211001123153.67379-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-05 15:22:37 -03:00
Kan Liang
0b6c5371c0 perf tests attr: Add missing topdown metrics events
The Topdown metrics events were added as 'perf stat' default events
since commit 42641d6f4d ("perf stat: Add Topdown metrics events as
default events").

However, the perf attr tests were not updated
accordingly.

The perf attr test fails on the platform which supports Topdown metrics.

  # perf test 17

    17: Setup struct perf_event_attr        :FAILED!

Add Topdown metrics events into perf attr test cases. Make them optional
since they are only available on newer platforms.

Fixes: 42641d6f4d ("perf stat: Add Topdown metrics events as default events")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1633031566-176517-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-05 14:55:38 -03:00
Linus Torvalds
60a9483534 Warning fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmFcDYUACgkQ+7dXa6fL
 C2uVYA/9H4dNBL20cHC+SyPMy7FGdBzaW/d/ahzHw2GO1JipDmofZLqeshOXR/Va
 E3VcHb+RzpZNCjYflFD44mWiIYLhqGtDstbcSn/Eqlij4Mmtq4cj7AbYV753gRnX
 OItms9dez6IEkCjE3gMpHE9VPWtFv/48qzuMY2X9lyBFnYVSdHyBwr3Dk/wHfieP
 w07DBKptv2mrMV1mz9ghCU0VlgrjJcxJBzHaFHxIg3e/cVXVGpbH5ZWmh7OIJkC2
 ae7tKvQSDEwZHSO0cQiNKlyVt5v3iNBY7C3IjWFunbPvaBTiq8DpRXOx6vsPVeOI
 K+8+HwKdi1attN7KCjatYJLgiLkzOWr9H1rQHTDsa0QRfOwPR9KOA1arm9mnrcMP
 I7SZ7oKZ6SasKe5GrbP3IBdWmDxSUUXgzZmapr+eh0cwF9gVRp+rivlokBdmE01c
 aneG3FlGGIk+KRJl371XsAd3VlZguk66/r3GOLpor7+Z0DcXfvvpx5bJmmQCMvyW
 UjSFarn+FQwbk//29sXRGyYRjx7Nf7LjE7yu9Mq3s97SQpvZd8Z1WI9LTibUd6nd
 eC1eDqtaf6bEG5VFDFwfgCww7zGsWqES7HaaoaRRTQoiMog52GIDxiEYTepoGKto
 ufiLNYd8AAOQ4z+5aRwbq2bUbld2KI0TN3X8/7dlEP5xKFf4TN4=
 =kSrV
 -----END PGP SIGNATURE-----

Merge tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull misc fs warning fixes from David Howells:
 "The first four patches fix kerneldoc warnings in fscache, afs, 9p and
  nfs - they're mostly just comment changes, though there's one place in
  9p where a comment got detached from the function it was attached to
  (v9fs_fid_add) and has to switch places with a function that got
  inserted between (__add_fid).

  The patch on the end removes an unused symbol in fscache"

* tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: Remove an unused static variable
  fscache: Fix some kerneldoc warnings shown up by W=1
  9p: Fix a bunch of kerneldoc warnings shown up by W=1
  afs: Fix kerneldoc warning shown up by W=1
  nfs: Fix kerneldoc warning shown up by W=1
2021-10-05 10:52:53 -07:00