hrtimer_forward_now() is providing the same functionality. Preparation for
making hrtimer_forward() timer core code only.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: netdev@vger.kernel.org
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Intel Corporation <linuxwwan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since both forms are accepted, let's search for both when we
pre-validate the PHY modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop()
to get the length of rtnexthop correct.
Fixes: b0f6019363 ("ipv4: Refactor nexthop attributes in fib_dump_info")
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The enetc phylink .mac_config handler intends to clear the IFMODE field
(bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the
other fields instead.
For normal operation, the bug was inconsequential, due to the fact that
we write the PM0_IF_MODE register in two stages, first in
phylink .mac_config (which incorrectly cleared out a bunch of stuff),
then we update the speed and duplex to the correct values in
phylink .mac_link_up.
Judging by the code (not tested), it looks like maybe loopback mode was
broken, since this is one of the settings in PM0_IF_MODE which is
incorrectly cleared.
Fixes: c76a97218d ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode")
Reported-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add audio routing for Mic with bias to reduce noise when doing
audio capture.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On FBC1 we can specify an arbitrary cfb stride. The hw will
simply throw away any compressed line that would exceed the
specified limit and keep using the uncompressed data instead.
Thus we can allow arbitrary compression limits.
The one thing we have to keep in mind though is that the cfb
stride is specified in units of 32B (gen2) or 64B (gen3+).
Fortunately X-tile is already 128B (gen2) or 512B (gen3+) wide
so as long as we limit outselves to the same 4x compression
limit that FBC2 has we are guaranteed to have a sufficiently
aligned cfb stride.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-5-ville.syrjala@linux.intel.com
There's some kind of weird corner cases in FBC which requires
FBC segments to be separated by at least one extra cacheline.
Make sure that is present.
v2: Respin to fit in with skl_fbc_min_cfb_stride()
v3: Make it build
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921181245.15091-1-ville.syrjala@linux.intel.com
Apply the same 512 byte FBC segment alignment to glk+ as we use
on skl+. The only real difference is that we now have a dedicated
register for the FBC override stride. Not 100% sure which
platforms really need the 512B alignment, but it's easiest
to just do it on everything.
Also the hardware no longer seems to misclaculate the CFB stride
for linear, so we can omit the use of the override stride for
linear unless the stride is misaligned.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-3-ville.syrjala@linux.intel.com
The code to calculate the cfb stride/size is a bit of mess.
The cfb size is getting calculated based purely on the plane
stride and plane height. That doesn't account for extra
alignment we want for the cfb stride. The gen9 override
stride OTOH is just calculated based on the plane width, and
it does try to make things more aligned but any extra alignment
added there is not considered in the cfb size calculations.
So not at all convinced this is working as intended. Additionally
the compression limit handling is split between the cfb allocation
code and g4x_dpfc_ctl_limit() (for the 16bpp case), which is just
confusing.
Let's streamline the whole thing:
- Start with the plane stride, convert that into cfb stride (cfb is
always 4 bytes per pixel). All the calculations will assume 1:1
compression limit since that will give us the max values, and we
don't yet know how much stolen memory we will be able to allocate
- Align the cfb stride to 512 bytes on modern platforms. This guarantees
the 4 line segment will be 512 byte aligned regardles of the final
compression limit we choose later. The 512 byte alignment for the
segment is required by at least some of the platforms, and just doing
it always seems like the easiest option
- Figure out if we need to use the override stride or not. For X-tiled
it's never needed since the plane stride is already 512 byte aligned,
for Y-tiled it will be needed if the plane stride is not a multiple
of 512 bytes, and for linear it's apparently always needed because the
hardware miscalculates the cfb stride as PLANE_STRIDE*512 instead of
the PLANE_STRIDE*64 that it use with linear.
- The cfb size will be calculated based on the aligned cfb stride to
guarantee we actually reserved enough stolen memory and the FBC hw
won't end up scribbling over whatever else is allocated in stolen
- The compression limit handling we just do fully in the cfb allocation
code to make things less confusing
v2: Write the min cfb segment stride calculation in a more
explicit way to make it clear what is going on
v3: Remeber to update fbc->limit when changing to 16bpp
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923042151.19052-1-ville.syrjala@linux.intel.com
- Work around a bad GIC integration on a Renesas platform, where the
interconnect cannot deal with byte-sized MMIO accesses
- Cleanup another Renesas driver abusing the comma operator
- Fix a potential GICv4 memory leak on an error path
- Make the type of 'size' consistent with the rest of the code in
__irq_domain_add()
- Fix a regression in the Armada 370-XP IPI path
- Fix the build for the obviously unloved goldfish-pic
- Some documentation fixes
-----BEGIN PGP SIGNATURE-----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=Fn7y
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Work around a bad GIC integration on a Renesas platform, where the
interconnect cannot deal with byte-sized MMIO accesses
- Cleanup another Renesas driver abusing the comma operator
- Fix a potential GICv4 memory leak on an error path
- Make the type of 'size' consistent with the rest of the code in
__irq_domain_add()
- Fix a regression in the Armada 370-XP IPI path
- Fix the build for the obviously unloved goldfish-pic
- Some documentation fixes
Link: https://lore.kernel.org/r/20210924090933.2766857-1-maz@kernel.org
The return value of devm_clk_get should in general be propagated to
upper layer. In this case the clk is optional, use the appropriate
wrapper instead of interpreting all errors as "The optional clk is not
available".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Old code produces -24999 for 0b1110011100000000 input in standard format due to
always rounding up rather than "away from zero".
Use the common macro for division, unify and simplify the conversion code along
the way.
Fixes: 9410700b88 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
For both local and remote sensors all the supported ICs can report an
"undervoltage lockout" condition which means the conversion wasn't
properly performed due to insufficient power supply voltage and so the
measurement results can't be trusted.
Fixes: 9410700b88 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Function i2c_smbus_read_byte_data() can return a negative error number
instead of the data read if I2C transaction failed for whatever reason.
Lack of error checking can lead to serious issues on production
hardware, e.g. errors treated as temperatures produce spurious critical
temperature-crossed-threshold errors in BMC logs for OCP server
hardware. The patch was tested with Mellanox OCP Mezzanine card
emulating TMP421 protocol for temperature sensing which sometimes leads
to I2C protocol error during early boot up stage.
Fixes: 9410700b88 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-1-fercerpav@gmail.com
[groeck: dropped unnecessary line breaks]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
gcc 8.3 and 5.4 throw this:
In function 'modify_qp_init_to_rtr',
././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
[..]
drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP'
*((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \
^~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write'
#define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val)
^~~~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write'
hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini);
Because gcc has miscalculated the constantness of lp_pktn_ini:
mtu = ib_mtu_enum_to_int(ib_mtu);
if (WARN_ON(mtu < 0)) [..]
lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu);
Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4
and 8 which is compatible with the 4 bit field in the FIELD_PREP.
Work around this broken compiler by adding a 'can never be true'
constraint on lp_pktn_ini's value which clears out the problem.
Fixes: f0cb411aad ("RDMA/hns: Use new interface to modify QP context")
Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This code works, but it is cleaner to use a semicolon at the end of a
statement instead of a comma.
Extracted from a big anonymous patch by Julia Lawall
<julia.lawall@inria.fr>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210914073155.3883532-1-geert@linux-m68k.org
Add a m68k-only set_fc helper to set the SFC and DFC registers for the
few places that need to override it for special MM operations, but
disconnect that from the deprecated kernel-wide set_fs() API.
Note that the SFC/DFC registers are context switched, so there is no need
to disable preemption.
Partially based on an earlier patch from
Linus Torvalds <torvalds@linux-foundation.org>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Allow non-faulting access to kernel addresses without overriding the
address space. Implemented by passing the instruction name to the
low-level assembly macros as an argument, and force the use of the
normal move instructions for kernel access.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-6-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Add new helpers for doing the grunt work of the 8-byte {get,put}_user
routines to allow for better reuse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-5-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Simplify the handling a bit by using the common helper instead of
referencing undefined symbols.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The 030 case in virt_to_phys_slow can't ever be reached, so remove it.
Suggested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-3-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Document that access_ok is completely broken for coldfire and friends at
the moment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
sigreturn has to deal with an unpleasant problem - exception stack frames
have different sizes, depending upon the exception (and processor model, as
well) and variable-sized part of exception frame may contain information
needed for instruction restart. So when signal handler terminates and calls
sigreturn to resume the execution at the place where we'd been when we caught
the signal, it has to rearrange the frame at the bottom of kernel stack.
Worse, it might need to open a gap in the kernel stack, shifting pt_regs
towards lower addresses.
Doing that from C is insane - we'd need to shift stack frames (return addresses,
local variables, etc.) of C call chain, right under the nose of compiler and
hope it won't fall apart horribly. What had been actually done is only slightly
less insane - an inline asm in mangle_kernel_stack() moved the stuff around,
then reset stack pointer and jumped to label in asm glue.
However, we can avoid all that mess if the asm wrapper we have to use anyway
would reserve some space on the stack between switch_stack and the C stack
frame of do_{rt_,}sigreturn(). Then C part can simply memmove() pt_regs +
switch_stack, memcpy() the variable part of exception frame into the opened
gap - all of that without inline asm, buggering C call chain, magical jumps
to asm labels, etc.
Asm wrapper would need to know where the moved switch_stack has ended up -
it might have been shifted into the gap we'd reserved before do_rt_sigreturn()
call. That's where it needs to set the stack pointer to. So let the C part
return just that and be done with that.
While we are at it, the call of berr_040cleanup() we need to do when
returning via 68040 bus error exception frame can be moved into C part
as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
We get there when sigreturn has performed obscene acts on kernel stack;
in particular, the location of pt_regs has shifted. We are about to call
syscall_trace(), which might stop for tracer. If that happens, we'd better
have task_pt_regs() returning correct result...
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: bd6f56a75b ("m68k: Missing syscall_trace() on sigreturn")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When we have several pending signals, have entered with the kernel
with large exception frame *and* have already built at least one
sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc
are going to be junk - the real values are in shifted exception stack
frame we'd built when putting together the first sigframe.
If that happens, subsequent sigframes are going to be garbage.
Not hard to fix - just need to find the "adjusted" frame first
and look for format/vector/sr/pc in it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
If monitor interface is enabled in co-exist mode, only local traffic are
captured. It's caused by missing monitor vdev in co-exist mode. So,
monitor mode clean up is done with separate Monitor APIs. For this,
introduce flags monitor_started and monitor_vdev_created.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1
Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-4-jouni@codeaurora.org
Add separate APIs for monitor_vdev_create/monitor_vdev_delete
and monitor_vdev_start/monitor_vdev_stop.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1
Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-3-jouni@codeaurora.org
This is to prepare for monitor mode clean up.
No functional changes are done.
Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-2-jouni@codeaurora.org
NIC card saves calibrated TX power index in the efuse(ROM).
Driver loads TX power idex when interface is up.
The problem is type2/4 NICs loads 2.4G TX power index
from wrong position. This patch corrects the offsets.
So, driver loads real 2.4G TX power index for type 2/4 NICs.
2.4G performance increased when using correct TX power index.
Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210922023637.9357-2-pkshih@realtek.com
RFE type4 is a new NIC which has one RF antenna shares with BT.
RFE type4 HW is the same as RFE type2 but attaching antenna to
aux antenna connector.
RFE type2 attach antenna to main antenna connector.
Load the same parameter as RFE type2 when initializing NIC.
Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210922023637.9357-1-pkshih@realtek.com
Use devm_add_action_or_reset() instead of devm_add_action() to simplify
the error handling.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210922130002.586-1-caihuoqing@baidu.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Randconfig builds still show a failure for the ath5k driver,
similar to the one that was fixed for ath9k earlier:
WARNING: unmet direct dependencies detected for MAC80211_LEDS
Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y])
Selected by [m]:
- ATH5K [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && (PCI [=y] || ATH25) && MAC80211 [=y]
net/mac80211/led.c: In function 'ieee80211_alloc_led_names':
net/mac80211/led.c:34:22: error: 'struct led_trigger' has no member named 'name'
34 | local->rx_led.name = kasprintf(GFP_KERNEL, "%srx",
| ^
Copying the same logic from my ath9k patch makes this one work
as well, stubbing out the calls to the LED subsystem.
Fixes: b64acb28da ("ath9k: fix build error with LEDS_CLASS=m")
Fixes: 72cdab8087 ("ath9k: Do not select MAC80211_LEDS by default")
Fixes: 3a078876ca ("ath5k: convert LED code to use mac80211 triggers")
Link: https://lore.kernel.org/all/20210722105501.1000781-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210920122359.353810-1-arnd@kernel.org
In function ieee80211_prep_channel(), it has some ieee80211_bss_get_ie()
and cfg80211_find_ext_ie() to get the IE, this is to use another
function ieee802_11_parse_elems() to get all the IEs in one time.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210924100052.32029-6-wgong@codeaurora.org
[remove now unnecessary size validation, use -ENOMEM, free elems earlier
for less error handling code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>