commit cc8f92e41e upstream.
In w1_attach_slave_device(), if __w1_attach_slave_device() fails,
put_device() -> w1_slave_release() is called to do the cleanup job.
In w1_slave_release(), sl->family->refcnt and sl->master->slave_count
have already been decremented. There is no need to decrement twice
in w1_attach_slave_device().
Fixes: 2c927c0c73 ("w1: Fix slave count on 1-Wire bus (resend)")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251218111414.564403-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 761fcf46a1 upstream.
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code.
Cc: stable@vger.kernel.org
Fixes: e2c94d6f57 ("w1_therm: adding alarm sysfs entry")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251216145007.44328-2-thorsten.blum@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e03b29b55f upstream.
Some of the hardware registers of the DMM-32-AT board are multiplexed,
using the least significant two bits of the Miscellaneous Control
register to select the function of registers at offsets 12 to 15:
00 => 8254 timer/counter registers are accessible
01 => 8255 digital I/O registers are accessible
10 => Reserved
11 => Calibration registers are accessible
The interrupt service routine (`dmm32at_isr()`) clobbers the bottom two
bits of the register with value 00, which would interfere with access to
the 8255 registers by the `dm32at_8255_io()` function (used for Comedi
instruction handling on the digital I/O subdevice).
Make use of the generic Comedi device spin-lock `dev->spinlock` (which
is otherwise unused by this driver) to serialize access to the
miscellaneous control register and paged registers.
Fixes: 3c501880ac ("Staging: comedi: add dmm32at driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260112162835.91688-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27aff0a56b upstream.
Fintek F81504/508/512 can support both RTS_ON_SEND and RTS_AFTER_SEND,
but pci_fintek_rs485_supported only announces the former.
This makes it impossible to unset SER_RS485_RTS_ON_SEND from
userspace because of uart_sanitize_serial_rs485(). Some devices
with these chips need RTS low on TX, so they are effectively broken.
Fix this by announcing the support for SER_RS485_RTS_AFTER_SEND,
similar to commit 068d35a7be ("serial: sc16is7xx: announce support
for SER_RS485_RTS_ON_SEND").
Fixes: 4afeced55b ("serial: core: fix sanitizing check for RTS settings")
Cc: stable <stable@kernel.org>
Signed-off-by: Marnix Rijnart <marnix.rijnart@iwell.eu>
Link: https://patch.msgid.link/20260112000931.61703-1-marnix.rijnart@iwell.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5dc6975566 ]
S1G beacons don't contain the DA field as per IEEE80211-2024 9.3.4.3,
so the DA broadcast check reads the SA address of the S1G beacon which
will subsequently lead to the beacon being dropped. As a result, passive
scanning is not possible. Fix this by only performing the check on
non-S1G beacons to allow S1G long beacons to be processed during a
passive scan.
Fixes: ddf82e752f ("wifi: mac80211: Allow beacons to update BSS table regardless of scan")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260120031122.309942-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2397e92646 ]
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs.
Fixes: 104880a6b4 ("crypto: authencesn - Convert to new AEAD interface")
Reported-By: Taeyang Lee <0wn@theori.io>
Signed-off-by: Taeyang Lee <0wn@theori.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d837fbee92 ]
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50da4b9d07 ]
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9b218a15 ]
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3ba321624 ]
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths.
Fixes: 8230819494 ("ipvlan: use per device spinlock to protect addrs list updates")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b47adaab8b ]
In veth_get_ethtool_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics, peer_tq_xdp_xmit and
peer_tq_xdp_xmit_err, are already accumulated by veth_xdp_xmit(). Fix
this by reading them into a temporary buffer first.
Fixes: 5fe6e56776 ("veth: rely on peer veth_rq for ndo_xdp_xmit accounting")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260114122450.227982-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a9bc9e3f4 ]
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO.
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158f985cf ]
On the receive path, packet can be damaged because of buffer
overflow in Rx FIFO. Avoid misleading per-packet error log when
packet->errors is set, this can flood the log. Instead, rely on the
standard rtnl_link_stats64 stats.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a80c9d945a ]
A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key
initialization fails:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2
RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline]
RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401
Call Trace:
sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189
sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111
sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217
sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052
sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88
sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243
sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127
The issue is triggered when sctp_auth_asoc_init_active_key() fails in
sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the
command sequence is currently:
- SCTP_CMD_PEER_INIT
- SCTP_CMD_TIMER_STOP (T1_INIT)
- SCTP_CMD_TIMER_START (T1_COOKIE)
- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)
- SCTP_CMD_ASSOC_SHKEY
- SCTP_CMD_GEN_COOKIE_ECHO
If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while
asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by
SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL
to be queued by sctp_datamsg_from_user().
Since command interpretation stops on failure, no COOKIE_ECHO should been
sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already
been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As
a result, the DATA chunk can be transmitted together with the COOKIE_ECHO
in sctp_outq_flush_data(), leading to the observed issue.
Similar to the other places where it calls sctp_auth_asoc_init_active_key()
right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY
immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting
T1_COOKIE. This ensures that if shared key generation fails, authenticated
DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,
giving the client another chance to process INIT_ACK and retry key setup.
Fixes: 730fc3d05c ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Zhen Chen <chenzhen126@huawei.com>
Tested-by: Zhen Chen <chenzhen126@huawei.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/44881224b375aa8853f5e19b4055a1a56d895813.1768324226.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a6d1bfe1 ]
In commit 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message.
Fixes: 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260110223836.3890248-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260116-can_usb-fix-reanchor-v1-1-9d74e7289225@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f5f148dd7 ]
Currently, the test breaks if the SUT already has a default route
configured for IPv6. Fix by avoiding the use of the default namespace.
Fixes: 4ed591c8ab ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d7dbafefb ]
The SR9700 chip sends more than one packet in a USB transaction,
like the DM962x chips can optionally do, but the dm9601 driver does not
support this mode, and the hardware does not have the DM962x
MODE_CTL register to disable it, so this driver drops packets on SR9700
devices. The sr9700 driver correctly handles receiving more than one
packet per transaction.
While the dm9601 driver could be improved to handle this, the easiest
way to fix this issue in the short term is to remove the SR9700 device
ID from the dm9601 driver so the sr9700 driver is always used. This
device ID should not have been in more than one driver to begin with.
The "Fixes" commit was chosen so that the patch is automatically
included in all kernels that have the sr9700 driver, even though the
issue affects dm9601.
Fixes: c9b37458e9 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://patch.msgid.link/20260113063924.74464-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0386bd321d ]
vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb
(with a spare tail room) is followed by a small skb (length limited by
GOOD_COPY_LEN = 128), an attempt is made to join them.
Since the introduction of MSG_ZEROCOPY support, assumption that a small skb
will always be linear is incorrect. In the zerocopy case, data is lost and
the linear skb is appended with uninitialized kernel memory.
Of all 3 supported virtio-based transports, only loopback-transport is
affected. G2H virtio-transport rx queue operates on explicitly linear skbs;
see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G
vhost-transport may allocate non-linear skbs, but only for sizes that are
not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in
virtio_vsock_alloc_skb().
Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0
guarantees last_skb is linear.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260113-vsock-recv-coalescence-v2-1-552b17837cf4@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6990dc392a ]
The current HW bug workaround checks the TXTT_0 ready bit first,
then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0)
to detect whether a new timestamp was captured by timestamp
register 0 during the workaround.
This sequence has a race: if a new timestamp is captured after
checking the TXTT_0 bit but before the first TXSTMPL_0 read, the
detection fails because both the "old" and "new" values come from
the same timestamp.
Fix by reading TXSTMPL_0 first to establish a baseline, then
checking the TXTT_0 bit. This ensures any timestamp captured
during the race window will be detected.
Old sequence:
1. Check TXTT_0 ready bit
2. Read TXSTMPL_0 (baseline)
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
New sequence:
1. Read TXSTMPL_0 (baseline)
2. Check TXTT_0 ready bit
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
Fixes: c789ad7cbe ("igc: Work around HW bug causing missing timestamps")
Suggested-by: Avi Shalev <avi.shalev@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41a9a6826f ]
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
sets a default Qbv schedule of all gates opened and a cycle time of
1s. This schedule is set during probe.
However, the following sequence of events lead to Tx issues:
- Boot a dual core system
igc_probe():
igc_tsn_clear_schedule():
-> Default Schedule is set
Note: At this point the driver has allocated two Tx/Rx queues, because
there are only two CPUs.
- ethtool -L enp3s0 combined 4
igc_ethtool_set_channels():
igc_reinit_queues()
-> Default schedule is gone, per Tx ring start and end time are zero
- tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 hw 1
igc_tsn_offload_apply():
igc_tsn_enable_offload():
-> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
Therefore, restore the default Qbv schedule after changing the number of
channels.
Furthermore, add a restriction to not allow queue reconfiguration when
TSN/Qbv is enabled, because it may lead to inconsistent states.
Fixes: c814a2d2d4 ("igc: Use default cycle 'start' and 'end' values for queues")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01139a2ce5 ]
The commit 5f6df173f9 ("ice: implement and use rd32_poll_timeout for
ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies
to microseconds.
But the ice_release_res() function was missed, and its logic still
treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value.
So correct the issue by usecs_to_jiffies().
Found by inspection of the DDP downloading process.
Compile and modprobe tested only.
Fixes: 5f6df173f9 ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9d45c22ed ]
When the user issues an administrative down to an interface that is the
primary for an aggregate bond, the prune lists are being purged. This
breaks communication to the secondary interface, which shares a prune
list on the main switch block while bonded together.
For the primary interface of an aggregate, avoid deleting these prune
lists during stop, and since they are hardcoded to specific values for
the default vlan and QinQ vlans, the attempt to re-add them during the
up phase will quietly fail without any additional problem.
Fixes: 1e0f9881ef ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8439016c3b ]
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit
systems it contains a seqcount_t which needs to be initialized. While the
memory is zero-initialized, a lack of u64_stats_init means that lockdep
won't get initialized properly. Fix this by adding u64_stats_init() calls
to the rings just after allocation.
Fixes: 2b245cb294 ("ice: Implement transmit and NAPI support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8c6fb886f ]
Commit d633b8a702 ("libata: print feature list on device scan")
added a print of the features supported by the device for ATA_DEV_ATA and
ATA_DEV_ZAC devices, but not for ATA_DEV_ATAPI devices.
Fix this by printing the features also for ATAPI devices.
Before changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
After changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
ata1.00: Features: Dev-Attention HIPM DIPM
Fixes: d633b8a702 ("libata: print feature list on device scan")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f3fb33f8f ]
Commit d360121832 ("ata: libata-core: Introduce ata_dev_config_lpm()")
introduced ata_dev_config_lpm(). However, it only called this function for
ATA_DEV_ATA and ATA_DEV_ZAC devices, not for ATA_DEV_ATAPI devices.
Additionally, commit d99a9142e7 ("ata: libata-core: Move device LPM quirk
settings to ata_dev_config_lpm()") moved the LPM quirk application from
ata_dev_configure() to ata_dev_config_lpm(), causing LPM quirks for ATAPI
devices to no longer be applied.
Call ata_dev_config_lpm() also for ATAPI devices, such that LPM quirks are
applied for ATAPI devices with an entry in __ata_dev_quirks once again.
Fixes: d360121832 ("ata: libata-core: Introduce ata_dev_config_lpm()")
Fixes: d99a9142e7 ("ata: libata-core: Move device LPM quirk settings to ata_dev_config_lpm()")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Stable-dep-of: c8c6fb886f ("ata: libata: Print features also for ATAPI devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d360121832 ]
If the port of a device does not support Device Initiated Power
Management (DIPM), that is, the port is flagged with ATA_FLAG_NO_DIPM,
the DIPM feature of a device should not be used. Though DIPM is disabled
by default on a device, the "Software Settings Preservation feature"
may keep DIPM enabled or DIPM may have been enabled by the system
firmware.
Introduce the function ata_dev_config_lpm() to always disable DIPM on a
device that supports this feature if the port of the device is flagged
with ATA_FLAG_NO_DIPM. ata_dev_config_lpm() is called from
ata_dev_configure(), ensuring that a device DIPM feature is disabled
when it cannot be used.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250701125321.69496-2-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Stable-dep-of: c8c6fb886f ("ata: libata: Print features also for ATAPI devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6bee5e524 ]
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit fe22e1c2f7 ("libata: support concurrent positioning
ranges log") added another feature to ata_dev_print_features() without
updating the early return conditional.
Add the missing feature to the early return conditional.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce83767ea3 ]
The link_power_management_supported sysfs attribute is currently set as
true even for ata ports that lack a .set_lpm() callback, e.g. dummy ports.
This is a bit silly, because while writing to the
link_power_management_policy sysfs attribute will make ata_scsi_lpm_store()
update ap->target_lpm_policy (thus sysfs will reflect the new value) and
call ata_port_schedule_eh() for the port, it is essentially a no-op.
This is because for a port without a .set_lpm() callback, once EH gets to
run, the ata_eh_link_set_lpm() will simply return, since the port does not
provide a .set_lpm() callback.
Thus, make sure that the link_power_management_supported sysfs attribute
is set to false for ports that lack a .set_lpm() callback. This way the
link_power_management_policy sysfs attribute will no longer be writable,
so we will no longer be misleading users to think that their sysfs write
actually does something.
Fixes: 0060beec0b ("ata: libata-sata: Add link_power_management_supported sysfs attribute")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea4d4ea6d1 ]
An AHCI HBA specifies the number of ports it supports using CAP.NP.
The HBA is free to only make a subset of the number of ports available
using the PI (Ports Implemented) register.
libata currently creates dummy ports for HBA ports that are provided by
the HBA, but which are marked as "unavailable" using the PI register.
Each port will have a per port area of registers in the HBA, regardless
if the port is marked as "unavailable" or not.
ahci_mark_external_port() currently reads this per port area of registers
using readl() to see if the port is marked as external/hotplug-capable.
However, AHCI 1.3.1, section "3.1.4 Offset 0Ch: PI – Ports Implemented"
states: "Software must not read or write to registers within unavailable
ports."
Thus, make sure that we only call ahci_mark_external_port() and
ahci_update_initial_lpm_policy() for ports that are implemented.
From a libata perspective, this should not change anything related to LPM,
as dummy ports do not provide any ap->ops (they do not have a .set_lpm()
callback), so even if EH were to call .set_lpm() on a dummy port, it was
already a no-op.
Fixes: f713193523 ("ata: ahci: move marking of external port earlier")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d8f69f453 ]
When the BLOCK_GROUP_TREE compat_ro flag is set, the extent root and
csum root fields are getting missed.
This is because EXTENT_TREE_V2 treated these differently, and when
they were split off this special-casing was mistakenly assigned to
BGT rather than the rump EXTENT_TREE_V2. There's no reason why the
existence of the block group tree should mean that we don't record the
details of the last commit's extent root and csum root.
Fix the code in backup_super_roots() so that the correct check gets
made.
Fixes: 1c56ab9919 ("btrfs: separate BLOCK_GROUP_TREE compat RO flag from EXTENT_TREE_V2")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49f49d47af ]
hv_kmsg_dump() currently skips the panic notification entirely if it
doesn't get any message bytes to pass to Hyper-V due to an error from
kmsg_dump_get_buffer(). Skipping the notification is undesirable because
it leaves the Hyper-V host uncertain about the state of a panic'ed guest.
Fix this by always doing the panic notification, even if bytes_written
is zero. Also ensure that bytes_written is initialized, which fixes a
kernel test robot warning. The warning is actually bogus because
kmsg_dump_get_buffer() happens to set bytes_written even if it fails, and
in the kernel test robot's CONFIG_PRINTK not set case, hv_kmsg_dump() is
never called. But do the initialization for robustness and to quiet the
static checker.
Fixes: 9c318a1d9b ("Drivers: hv: move panic report code from vmbus to hv early init code")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202512172103.OcUspn1Z-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 868b979c53 ]
To make sure that power rail is voted for, wire it up to its consumers.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-3-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bc3e720e7 ]
This was apparently accounted for in dt-bindings, but never made its
way into the driver.
Fix it for SC8280XP and its VDD_GFX-less cousin, SA8540P.
Fixes: f68f1cb343 ("soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-2-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e1be5dde ]
Not sure how useful it's gonna be in practice, but the definition is
missing (unlike the previously-unused SC8280XP_MXC-non-_AO), so add it
to allow the driver to create the corresponding pmdomain.
Fixes: dbfb5f94e0 ("dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-1-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 5bc3e720e7 ("pmdomain: qcom: rpmhpd: Add MXC to SC8280XP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb8d01b65 ]
Historically both RPM and RPMh domain definitions were a part of the
same, qcom-rpmpd.h header. Now as we have a separate header for RPMh
definitions, qcom,rpmhpd.h, move all RPMh power domain definitions to
that header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-1-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 5bc3e720e7 ("pmdomain: qcom: rpmhpd: Add MXC to SC8280XP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76868642e4 ]
PTP Hardware Clocks no longer require WRITE permission to perform
readonly operations, such as listing device capabilities or listening to
EXTTS events once they have been enabled by a process with WRITE
permissions.
Add '-r' option to testptp to open the PHC in readonly mode instead of
the default read-write mode. Skip enabling EXTTS if readonly mode is
requested.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d07b691ee ]
With the inclusion of commit c259acab83 ("ptp/ioctl: support
MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime()
now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and
CLOCK_MONOTONIC_RAW timebases along with the previously supported
CLOCK_REALTIME.
This patch adds a command line option 'y' to the testptp program to
choose one of the allowed timebases [realtime aka system, monotonic,
and monotonic-raw).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e53b15c0 ]
Many devices implement highly accurate clocks, which the kernel manages
as PTP Hardware Clocks (PHCs). Userspace applications rely on these
clocks to timestamp events, trace workload execution, correlate
timescales across devices, and keep various clocks in sync.
The kernel’s current implementation of PTP clocks does not enforce file
permissions checks for most device operations except for POSIX clock
operations, where file mode is verified in the POSIX layer before
forwarding the call to the PTP subsystem. Consequently, it is common
practice to not give unprivileged userspace applications any access to
PTP clocks whatsoever by giving the PTP chardevs 600 permissions. An
example of users running into this limitation is documented in [1].
Additionally, POSIX layer requires WRITE permission even for readonly
adjtime() calls which are used in PTP layer to return current frequency
offset applied to the PHC.
Add permission checks for functions that modify the state of a PTP
device. Continue enforcing permission checks for POSIX clock operations
(settime, adjtime) in the POSIX layer. Only require WRITE access for
dynamic clocks adjtime() if any flags are set in the modes field.
[1] https://lists.nwtime.org/sympa/arc/linuxptp-users/2024-01/msg00036.html
Changes in v4:
- Require FMODE_WRITE in ajtime() only for calls modifying the clock in
any way.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e859d375d1 ]
File descriptor based pc_clock_*() operations of dynamic posix clocks
have access to the file pointer and implement permission checks in the
generic code before invoking the relevant dynamic clock callback.
Character device operations (open, read, poll, ioctl) do not implement a
generic permission control and the dynamic clock callbacks have no
access to the file pointer to implement them.
Extend struct posix_clock_context with a struct file pointer and
initialize it in posix_clock_open(), so that all dynamic clock callbacks
can access it.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4c80187001 upstream.
Handle more gracefully cases where no SRAT information is available, like
in VMs with no Numa support, and allow fake-numa configuration to complete
successfully in these cases
Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com
Fixes: 63db8170bf (“mm/fake-numa: allow later numa node hotplug”)
Signed-off-by: Bruno Faccini <bfaccini@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 038a102535 ]
The kernel test robot has reported:
BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28
lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0
CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470
Call Trace:
<IRQ>
__dump_stack (lib/dump_stack.c:95)
dump_stack_lvl (lib/dump_stack.c:123)
dump_stack (lib/dump_stack.c:130)
spin_dump (kernel/locking/spinlock_debug.c:71)
do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?)
_raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138)
__free_frozen_pages (mm/page_alloc.c:2973)
___free_pages (mm/page_alloc.c:5295)
__free_pages (mm/page_alloc.c:5334)
tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290)
? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289)
? rcu_core (kernel/rcu/tree.c:?)
rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861)
rcu_core_si (kernel/rcu/tree.c:2879)
handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623)
__irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725)
irq_exit_rcu (kernel/softirq.c:741)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052)
</IRQ>
<TASK>
RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
free_pcppages_bulk (mm/page_alloc.c:1494)
drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632)
__drain_all_pages (mm/page_alloc.c:2731)
drain_all_pages (mm/page_alloc.c:2747)
kcompactd (mm/compaction.c:3115)
kthread (kernel/kthread.c:465)
? __cfi_kcompactd (mm/compaction.c:3166)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork (arch/x86/kernel/process.c:164)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
</TASK>
Matthew has analyzed the report and identified that in drain_page_zone()
we are in a section protected by spin_lock(&pcp->lock) and then get an
interrupt that attempts spin_trylock() on the same lock. The code is
designed to work this way without disabling IRQs and occasionally fail the
trylock with a fallback. However, the SMP=n spinlock implementation
assumes spin_trylock() will always succeed, and thus it's normally a
no-op. Here the enabled lock debugging catches the problem, but otherwise
it could cause a corruption of the pcp structure.
The problem has been introduced by commit 5749077415 ("mm/page_alloc:
leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme
recognizes the need for disabling IRQs to prevent nesting spin_trylock()
sections on SMP=n, but the need to prevent the nesting in spin_lock() has
not been recognized. Fix it by introducing local wrappers that change the
spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places
that do spin_lock(&pcp->lock).
[vbabka@suse.cz: add pcp_ prefix to the spin_lock_irqsave wrappers, per Steven]
Link: https://lkml.kernel.org/r/20260105-fix-pcp-up-v1-1-5579662d2071@suse.cz
Fixes: 5749077415 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202512101320.e2f2dd6f-lkp@intel.com
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/all/aUW05pyc9nZkvY-1@casper.infradead.org/
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc4b909c36 ]
It is possible for pcp->count - pcp->high to exceed pcp->batch by a lot.
When this happens, we should perform batching to ensure that
free_pcppages_bulk isn't called with too many pages to free at once and
starve out other threads that need the pcp or zone lock.
Since we are still only freeing the difference between the initial
pcp->count and pcp->high values, there should be no change to how many
pages are freed.
Link: https://lkml.kernel.org/r/20251014145011.3427205-3-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Chris Mason <clm@fb.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Co-developed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 038a102535 ("mm/page_alloc: prevent pcp corruption with SMP=n")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
