Commit graph

1,317,054 commits

Author SHA1 Message Date
Al Viro
47ab2caba4 qibfs: fix _another_ leak
[ Upstream commit bdb43af4fd ]

failure to allocate inode => leaked dentry...

this one had been there since the initial merge; to be fair,
if we are that far OOM, the odds of failing at that particular
allocation are low...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:20 +02:00
Josh Poimboeuf
69578c7d02 objtool, lkdtm: Obfuscate the do_nothing() pointer
[ Upstream commit 05026ea01e ]

If execute_location()'s memcpy of do_nothing() gets inlined and unrolled
by the compiler, it copies one word at a time:

    mov    0x0(%rip),%rax    R_X86_64_PC32    .text+0x1374
    mov    %rax,0x38(%rbx)
    mov    0x0(%rip),%rax    R_X86_64_PC32    .text+0x136c
    mov    %rax,0x30(%rbx)
    ...

Those .text references point to the middle of the function, causing
objtool to complain about their lack of ENDBR.

Prevent that by resolving the function pointer at runtime rather than
build time.  This fixes the following warning:

  drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:20 +02:00
Josh Poimboeuf
03bb66ede7 objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
[ Upstream commit 29c578c848 ]

If 'ctr_bit' is negative, the shift counts become negative, causing a
shift of bounds and undefined behavior.

Presumably that's not possible in normal operation, but the code
generation isn't optimal.  And undefined behavior should be avoided
regardless.

Improve code generation and remove the undefined behavior by converting
the signed variables to unsigned.

Fixes the following warning with an UBSAN kernel:

  vmlinux.o: warning: objtool: rk806_set_mode_dcdc() falls through to next function rk806_get_mode_dcdc()
  vmlinux.o: warning: objtool: .text.rk806_set_mode_dcdc: unexpected end of section

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/2023abcddf3f524ba478d64339996f25dc4097d2.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503182350.52KeHGD4-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:20 +02:00
Josh Poimboeuf
777e6735fe objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
[ Upstream commit 060aed9c00 ]

If 'port_id' is negative, the shift counts in wcd934x_slim_irq_handler()
also become negative, resulting in undefined behavior due to shift out
of bounds.

If I'm reading the code correctly, that appears to be not possible, but
with KCOV enabled, Clang's range analysis isn't always able to determine
that and generates undefined behavior.

As a result the code generation isn't optimal, and undefined behavior
should be avoided regardless.  Improve code generation and remove the
undefined behavior by converting the signed variables to unsigned.

Fixes the following warning with UBSAN:

  sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/7e863839ec7301bf9c0f429a03873d44e484c31c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:19 +02:00
Josh Poimboeuf
0485bdf88f objtool, panic: Disable SMAP in __stack_chk_fail()
[ Upstream commit 72c774aa9d ]

__stack_chk_fail() can be called from uaccess-enabled code.  Make sure
uaccess gets disabled before calling panic().

Fixes the following warning:

  kernel/trace/trace_branch.o: error: objtool: ftrace_likely_update+0x1ea: call to __stack_chk_fail() with UACCESS enabled

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/a3e97e0119e1b04c725a8aa05f7bc83d98e657eb.1742852847.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:19 +02:00
Josh Poimboeuf
8b4f2b6389 objtool: Silence more KCOV warnings
[ Upstream commit 6b023c7842 ]

In the past there were issues with KCOV triggering unreachable
instruction warnings, which is why unreachable warnings are now disabled
with CONFIG_KCOV.

Now some new KCOV warnings are showing up with GCC 14:

  vmlinux.o: warning: objtool: cpuset_write_resmask() falls through to next function cpuset_update_active_cpus.cold()
  drivers/usb/core/driver.o: error: objtool: usb_deregister() falls through to next function usb_match_device()
  sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section

All are caused by GCC KCOV not finishing an optimization, leaving behind
a never-taken conditional branch to a basic block which falls through to
the next function (or end of section).

At a high level this is similar to the unreachable warnings mentioned
above, in that KCOV isn't fully removing dead code.  Treat it the same
way by adding these to the list of warnings to ignore with CONFIG_KCOV.

Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/66a61a0b65d74e072d3dc02384e395edb2adc3c5.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/Z9iTsI09AEBlxlHC@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:19 +02:00
Benjamin Berg
da780c4a07 um: work around sched_yield not yielding in time-travel mode
[ Upstream commit 887c5c12e8 ]

sched_yield by a userspace may not actually cause scheduling in
time-travel mode as no time has passed. In the case seen it appears to
be a badly implemented userspace spinlock in ASAN. Unfortunately, with
time-travel it causes an extreme slowdown or even deadlock depending on
the kernel configuration (CONFIG_UML_MAX_USERSPACE_ITERATIONS).

Work around it by accounting time to the process whenever it executes a
sched_yield syscall.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250314130815.226872-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:19 +02:00
Mika Westerberg
0a205fdbb3 thunderbolt: Scan retimers after device router has been enumerated
[ Upstream commit 75749d2c1d ]

Thomas reported connection issues on AMD system with Pluggable UD-4VPD
dock. After some experiments it looks like the device has some sort of
internal timeout that triggers reconnect. This is completely against the
USB4 spec, as there is no requirement for the host to enumerate the
device right away or even at all.

In Linux case the delay is caused by scanning of retimers on the link so
we can work this around by doing the scanning after the device router
has been enumerated.

Reported-by: Thomas Lynema <lyz27@yahoo.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:19 +02:00
Théo Lebrun
7fb9a9d2e3 usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
[ Upstream commit 64eb182d5f ]

Compatible "marvell,armada3700-xhci" match data uses the
struct xhci_plat_priv::init_quirk() function pointer to add
XHCI_RESET_ON_RESUME as quirk on XHCI.

Instead, use the struct xhci_plat_priv::quirks field.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20250205-s2r-cdns-v7-1-13658a271c3c@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:19 +02:00
Chenyuan Yang
052fb65335 usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
[ Upstream commit 8c75f3e6a4 ]

The variable d->name, returned by devm_kasprintf(), could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b
("ice: Fix some null pointer dereference issues in ice_ptp.c").

This issue is found by our static analysis tool

Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250311012705.1233829-1-chenyuan0y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Andy Yan
2c97354037 phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init
[ Upstream commit 28dc672a1a ]

Function rk_udphy_dp_hpd_event_trigger will set vogrf let it
trigger HPD interrupt to DP by Type-C. This configuration is only
required when the DP work in Alternate Mode, and called by
typec_mux_set. In standard DP mode, such settings will prevent
the DP from receiving HPD interrupts.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250302115257.188774-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Michal Pecio
9ff59cb815 usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
[ Upstream commit 28a76fcc4c ]

Nothing prevents a broken HC from claiming that an endpoint is Running
and repeatedly rejecting Stop Endpoint with Context State Error.

Avoid infinite retries and give back cancelled TDs.

No such cases known so far, but HCs have bugs.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250311154551.4035726-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Vinicius Costa Gomes
2ef4b0e911 dmaengine: dmatest: Fix dmatest waiting less when interrupted
[ Upstream commit e87ca16e99 ]

Change the "wait for operation finish" logic to take interrupts into
account.

When using dmatest with idxd DMA engine, it's possible that during
longer tests, the interrupt notifying the finish of an operation
happens during wait_event_freezable_timeout(), which causes dmatest to
cleanup all the resources, some of which might still be in use.

This fix ensures that the wait logic correctly handles interrupts,
preventing premature cleanup of resources.

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171134.8c403348-lkp@intel.com
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250305230007.590178-1-vinicius.gomes@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Stanley Chu
69bb5d420d i3c: master: svc: Add support for Nuvoton npcm845 i3c
[ Upstream commit 98d87600a0 ]

Nuvoton npcm845 SoC uses an older IP version, which has specific
hardware issues that need to be addressed with a different compatible
string.

Add driver data for different compatible strings to define platform
specific quirks.
Add compatible string for npcm845 to define its own driver data.

Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250306075429.2265183-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Mathias Nyman
635be13606 xhci: Handle spurious events on Etron host isoc enpoints
[ Upstream commit b331a3d809 ]

Unplugging a USB3.0 webcam from Etron hosts while streaming results
in errors like this:

[ 2.646387] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646446] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8630 trb-start 000000002fdf8640 trb-end 000000002fdf8650
[ 2.646560] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646568] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8660 trb-start 000000002fdf8670 trb-end 000000002fdf8670

Etron xHC generates two transfer events for the TRB if an error is
detected while processing the last TRB of an isoc TD.

The first event can be any sort of error (like USB Transaction or
Babble Detected, etc), and the final event is Success.

The xHCI driver will handle the TD after the first event and remove it
from its internal list, and then print an "Transfer event TRB DMA ptr
not part of current TD" error message after the final event.

Commit 5372c65e13 ("xhci: process isoc TD properly when there was a
transaction error mid TD.") is designed to address isoc transaction
errors, but unfortunately it doesn't account for this scenario.

This issue is similar to the XHCI_SPURIOUS_SUCCESS case where a success
event follows a 'short transfer' event, but the TD the event points to
is already given back.

Expand the spurious success 'short transfer' event handling to cover
the spurious success after error on Etron hosts.

Kuangyi Chiang reported this issue and submitted a different solution
based on using error_mid_td. This commit message is mostly taken
from that patch.

Reported-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20241028025337.6372-6-ki.chiang65@gmail.com/
Tested-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Michal Pecio
16a7a8e6c4 usb: xhci: Fix isochronous Ring Underrun/Overrun event handling
[ Upstream commit 906dec15b9 ]

The TRB pointer of these events points at enqueue at the time of error
occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we
are handling the event, a new TD may be queued at this ring position.

I can trigger this race by rising interrupt moderation to increase IRQ
handling delay. Similar delay may occur naturally due to system load.

If this ever happens after a Missed Service Error, missed TDs will be
skipped and the new TD processed as if it matched the event. It could
be given back prematurely, risking data loss or buffer UAF by the xHC.

Don't complete TDs on xrun events and don't warn if queued TDs don't
match the event's TRB pointer, which can be NULL or a link/no-op TRB.
Don't warn if there are no queued TDs at all.

Now that it's safe, also handle xrun events if the skip flag is clear.
This ensures completion of any TD stuck in 'error mid TD' state right
before the xrun event, which could happen if a driver submits a finite
number of URBs to a buggy HC and then an error occurs on the last TD.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:18 +02:00
Michal Pecio
cbfa55bda1 usb: xhci: Complete 'error mid TD' transfers when handling Missed Service
[ Upstream commit bfa8459942 ]

Missed Service Error after an error mid TD means that the failed TD has
already been passed by the xHC without acknowledgment of the final TRB,
a known hardware bug. So don't wait any more and give back the TD.

Reproduced on NEC uPD720200 under conditions of ludicrously bad USB link
quality, confirmed to behave as expected using dynamic debug.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:17 +02:00
John Stultz
66046b586c sound/virtio: Fix cancel_sync warnings on uninitialized work_structs
[ Upstream commit 3c7df2e273 ]

Betty reported hitting the following warning:

[    8.709131][  T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182
...
[    8.713282][  T221] Call trace:
[    8.713365][  T221]  __flush_work+0x8d0/0x914
[    8.713468][  T221]  __cancel_work_sync+0xac/0xfc
[    8.713570][  T221]  cancel_work_sync+0x24/0x34
[    8.713667][  T221]  virtsnd_remove+0xa8/0xf8 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276]
[    8.713868][  T221]  virtsnd_probe+0x48c/0x664 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276]
[    8.714035][  T221]  virtio_dev_probe+0x28c/0x390
[    8.714139][  T221]  really_probe+0x1bc/0x4c8
...

It seems we're hitting the error path in virtsnd_probe(), which
triggers a virtsnd_remove() which iterates over the substreams
calling cancel_work_sync() on the elapsed_period work_struct.

Looking at the code, from earlier in:
virtsnd_probe()->virtsnd_build_devs()->virtsnd_pcm_parse_cfg()

We set snd->nsubstreams, allocate the snd->substreams, and if
we then hit an error on the info allocation or something in
virtsnd_ctl_query_info() fails, we will exit without having
initialized the elapsed_period work_struct.

When that error path unwinds we then call virtsnd_remove()
which as long as the substreams array is allocated, will iterate
through calling cancel_work_sync() on the uninitialized work
struct hitting this warning.

Takashi Iwai suggested this fix, which initializes the substreams
structure right after allocation, so that if we hit the error
paths we avoid trying to cleanup uninitialized data.

Note: I have not yet managed to reproduce the issue myself, so
this patch has had limited testing.

Feedback or thoughts would be appreciated!

Cc: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: virtualization@lists.linux.dev
Cc: linux-sound@vger.kernel.org
Cc: kernel-team@android.com
Reported-by: Betty Zhou <bettyzhou@google.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: John Stultz <jstultz@google.com>
Message-Id: <20250116194114.3375616-1-jstultz@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:17 +02:00
Andy Shevchenko
f045fd7d46 usb: dwc3: gadget: Avoid using reserved endpoints on Intel Merrifield
[ Upstream commit 461f24bff8 ]

Intel Merrifield SoC uses these endpoints for tracing and they cannot
be re-allocated if being used because the side band flow control signals
are hard wired to certain endpoints:

• 1 High BW Bulk IN (IN#1) (RTIT)
• 1 1KB BW Bulk IN (IN#8) + 1 1KB BW Bulk OUT (Run Control) (OUT#8)

In device mode, since RTIT (EP#1) and EXI/RunControl (EP#8) uses
External Buffer Control (EBC) mode, these endpoints are to be mapped to
EBC mode (to be done by EXI target driver). Additionally TRB for RTIT
and EXI are maintained in STM (System Trace Module) unit and the EXI
target driver will as well configure the TRB location for EP #1 IN
and EP#8 (IN and OUT). Since STM/PTI and EXI hardware blocks manage
these endpoints and interface to OTG3 controller through EBC interface,
there is no need to enable any events (such as XferComplete etc)
for these end points.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212193116.2487289-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:17 +02:00
Andy Shevchenko
2ecae00138 usb: dwc3: gadget: Refactor loop to avoid NULL endpoints
[ Upstream commit eafba02054 ]

Prepare the gadget driver to handle the reserved endpoints that will be
not allocated at the initialisation time.

While at it, add a warning where the NULL endpoint should never happen.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212193116.2487289-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:17 +02:00
Edward Adam Davis
8a5e1d32c6 fs/ntfs3: Fix WARNING in ntfs_extend_initialized_size
[ Upstream commit ff35592644 ]

Syzbot reported a WARNING in ntfs_extend_initialized_size.
The data type of in->i_valid and to is u64 in ntfs_file_mmap().
If their values are greater than LLONG_MAX, overflow will occur because
the data types of the parameters valid and new_valid corresponding to
the function ntfs_extend_initialized_size() are loff_t.

Before calling ntfs_extend_initialized_size() in the ntfs_file_mmap(),
the "ni->i_valid < to" has been determined, so the same WARN_ON determination
is not required in ntfs_extend_initialized_size().
Just execute the ntfs_extend_initialized_size() in ntfs_extend() to make
a WARN_ON check.

Reported-and-tested-by: syzbot+e37dd1dfc814b10caa55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e37dd1dfc814b10caa55
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:17 +02:00
Lizhi Xu
8db49e89a7 fs/ntfs3: Keep write operations atomic
[ Upstream commit 285cec318b ]

syzbot reported a NULL pointer dereference in __generic_file_write_iter. [1]

Before the write operation is completed, the user executes ioctl[2] to clear
the compress flag of the file, which causes the is_compressed() judgment to
return 0, further causing the program to enter the wrong process and call the
wrong ops ntfs_aops_cmpr, which triggers the null pointer dereference of
write_begin.

Use inode lock to synchronize ioctl and write to avoid this case.

[1]
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
  ESR = 0x0000000086000006
  EC = 0x21: IABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x06: level 2 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=000000011896d000
[0000000000000000] pgd=0800000118b44403, p4d=0800000118b44403, pud=0800000117517403, pmd=0000000000000000
Internal error: Oops: 0000000086000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 UID: 0 PID: 6427 Comm: syz-executor347 Not tainted 6.13.0-rc3-syzkaller-g573067a5a685 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : generic_perform_write+0x29c/0x868 mm/filemap.c:4055
sp : ffff80009d4978a0
x29: ffff80009d4979c0 x28: dfff800000000000 x27: ffff80009d497bc8
x26: 0000000000000000 x25: ffff80009d497960 x24: ffff80008ba71c68
x23: 0000000000000000 x22: ffff0000c655dac0 x21: 0000000000001000
x20: 000000000000000c x19: 1ffff00013a92f2c x18: ffff0000e183aa1c
x17: 0004060000000014 x16: ffff800083275834 x15: 0000000000000001
x14: 0000000000000000 x13: 0000000000000001 x12: ffff0000c655dac0
x11: 0000000000ff0100 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff80009d497980 x4 : ffff80009d497960 x3 : 0000000000001000
x2 : 0000000000000000 x1 : ffff0000e183a928 x0 : ffff0000d60b0fc0
Call trace:
 0x0 (P)
 __generic_file_write_iter+0xfc/0x204 mm/filemap.c:4156
 ntfs_file_write_iter+0x54c/0x630 fs/ntfs3/file.c:1267
 new_sync_write fs/read_write.c:586 [inline]
 vfs_write+0x920/0xcf4 fs/read_write.c:679
 ksys_write+0x15c/0x26c fs/read_write.c:731
 __do_sys_write fs/read_write.c:742 [inline]
 __se_sys_write fs/read_write.c:739 [inline]
 __arm64_sys_write+0x7c/0x90 fs/read_write.c:739
 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
 invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
 el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762

[2]
ioctl$FS_IOC_SETFLAGS(r0, 0x40086602, &(0x7f00000000c0)=0x20)

Reported-by: syzbot+5d0bdc98770e6c55a0fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5d0bdc98770e6c55a0fd
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:17 +02:00
Alexander Stein
523bcab993 usb: host: max3421-hcd: Add missing spi_device_id table
[ Upstream commit 41d5e3806c ]

"maxim,max3421" DT compatible is missing its SPI device ID entry, not
allowing module autoloading and leading to the following message:
 "SPI driver max3421-hcd has no spi_device_id for maxim,max3421"

Fix this by adding the spi_device_id table.

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Link: https://lore.kernel.org/r/20250128195114.56321-1-alexander.stein@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Sudeep Holla
8b7b088925 mailbox: pcc: Always clear the platform ack interrupt first
[ Upstream commit cf1338c0e0 ]

The PCC mailbox interrupt handler (pcc_mbox_irq()) currently checks
for command completion flags and any error status before clearing the
interrupt.

The below sequence highlights an issue in the handling of PCC mailbox
interrupts, specifically when dealing with doorbell notifications and
acknowledgment between the OSPM and the platform where type3 and type4
channels are sharing the interrupt.

-------------------------------------------------------------------------
| T |       Platform Firmware         |    OSPM/Linux PCC driver        |
|---|---------------------------------|---------------------------------|
| 1 |                                 | Build message in shmem          |
| 2 |                                 | Ring Type3 chan doorbell        |
| 3 | Receives the doorbell interrupt |                                 |
| 4 | Process the message from OSPM   |                                 |
| 5 | Build response for the message  |                                 |
| 6 | Ring Platform ACK interrupt on  |                                 |
|   |  Type3 chan to OSPM             | Received the interrupt          |
| 7 | Build Notification in Type4 Chan|                                 |
| 8 |                                 | Start processing interrupt in   |
|   |                                 |  pcc_mbox_irq() handler         |
| 9 |                                 | Enter PCC handler for Type4 chan|
|10 |                                 | Check command complete cleared  |
|11 |                                 | Read the notification           |
|12 |                                 | Clear Platform ACK interrupt    |
|   | No effect from the previous step yet as the Platform ACK          |
|   |  interrupt has not yet been triggered for this channel            |
|13 | Ring Platform ACK interrupt on  |                                 |
|   | Type4 chan to OSPM              |                                 |
|14 |                                 | Enter PCC handler for Type3 chan|
|15 |                                 | Command complete is set.        |
|16 |                                 | Read the response.              |
|17 |                                 | Clear Platform ACK interrupt    |
|18 |                                 | Leave PCC handler for Type3     |
|19 |                                 | Leave pcc_mbox_irq() handler    |
|20 |                                 | Re-enter pcc_mbox_irq() handler |
|21 |                                 | Enter PCC handler for Type4 chan|
|22 |                                 | Leave PCC handler for Type4 chan|
|23 |                                 | Enter PCC handler for Type3 chan|
|24 |                                 | Leave PCC handler for Type3 chan|
|25 |                                 | Leave pcc_mbox_irq() handler    |
-------------------------------------------------------------------------

The key issue occurs when OSPM tries to acknowledge platform ack
interrupt for a notification which is ready to be read and processed
but the interrupt itself is not yet triggered by the platform.

This ineffective acknowledgment leads to an issue later in time where
the interrupt remains pending as we exit the interrupt handler without
clearing the platform ack interrupt as there is no pending response or
notification. The interrupt acknowledgment order is incorrect.

To resolve this issue, the platform acknowledgment interrupt should
always be cleared before processing the interrupt for any notifications
or response.

Reported-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Huisong Li
a32ebfa7d8 mailbox: pcc: Fix the possible race in updation of chan_in_use flag
[ Upstream commit 9779d45c74 ]

The function mbox_chan_received_data() calls the Rx callback of the
mailbox client driver. The callback might set chan_in_use flag from
pcc_send_data(). This flag's status determines whether the PCC channel
is in use.

However, there is a potential race condition where chan_in_use is
updated incorrectly due to concurrency between the interrupt handler
(pcc_mbox_irq()) and the command sender(pcc_send_data()).

The 'chan_in_use' flag of a channel is set to true after sending a
command. And the flag of the new command may be cleared erroneous by
the interrupt handler afer mbox_chan_received_data() returns,

As a result, the interrupt being level triggered can't be cleared in
pcc_mbox_irq() and it will be disabled after the number of handled times
exceeds the specified value. The error log is as follows:

  |  kunpeng_hccs HISI04B2:00: PCC command executed timeout!
  |  kunpeng_hccs HISI04B2:00: get port link status info failed, ret = -110
  |  irq 13: nobody cared (try booting with the "irqpoll" option)
  |  Call trace:
  |   dump_backtrace+0x0/0x210
  |   show_stack+0x1c/0x2c
  |   dump_stack+0xec/0x130
  |   __report_bad_irq+0x50/0x190
  |   note_interrupt+0x1e4/0x260
  |   handle_irq_event+0x144/0x17c
  |   handle_fasteoi_irq+0xd0/0x240
  |   __handle_domain_irq+0x80/0xf0
  |   gic_handle_irq+0x74/0x2d0
  |   el1_irq+0xbc/0x140
  |   mnt_clone_write+0x0/0x70
  |   file_update_time+0xcc/0x160
  |   fault_dirty_shared_page+0xe8/0x150
  |   do_shared_fault+0x80/0x1d0
  |   do_fault+0x118/0x1a4
  |   handle_pte_fault+0x154/0x230
  |   __handle_mm_fault+0x1ac/0x390
  |   handle_mm_fault+0xf0/0x250
  |   do_page_fault+0x184/0x454
  |   do_translation_fault+0xac/0xd4
  |   do_mem_abort+0x44/0xb4
  |   el0_da+0x40/0x74
  |   el0_sync_handler+0x60/0xb4
  |   el0_sync+0x168/0x180
  |  handlers:
  |   pcc_mbox_irq
  |  Disabling IRQ #13

To solve this issue, pcc_mbox_irq() must clear 'chan_in_use' flag before
the call to mbox_chan_received_data().

Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
(sudeep.holla: Minor updates to the subject, commit message and comment)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Yafang Shao
b817d2bfd6 bpf: Reject attaching fexit/fmod_ret to __noreturn functions
[ Upstream commit cfe816d469 ]

If we attach fexit/fmod_ret to __noreturn functions, it will cause an
issue that the bpf trampoline image will be left over even if the bpf
link has been destroyed. Take attaching do_exit() with fexit for example.
The fexit works as follows,

  bpf_trampoline
  + __bpf_tramp_enter
    + percpu_ref_get(&tr->pcref);

  + call do_exit()

  + __bpf_tramp_exit
    + percpu_ref_put(&tr->pcref);

Since do_exit() never returns, the refcnt of the trampoline image is
never decremented, preventing it from being freed. That can be verified
with as follows,

  $ bpftool link show                                   <<<< nothing output
  $ grep "bpf_trampoline_[0-9]" /proc/kallsyms
  ffffffffc04cb000 t bpf_trampoline_6442526459    [bpf] <<<< leftover

In this patch, all functions annotated with __noreturn are rejected, except
for the following cases:
- Functions that result in a system reboot, such as panic,
  machine_real_restart and rust_begin_unwind
- Functions that are never executed by tasks, such as rest_init and
  cpu_startup_entry
- Functions implemented in assembly, such as rewind_stack_and_make_dead and
  xen_cpu_bringup_again, lack an associated BTF ID.

With this change, attaching fexit probes to functions like do_exit() will
be rejected.

$ ./fexit
libbpf: prog 'fexit': BPF program load failed: -EINVAL
libbpf: prog 'fexit': -- BEGIN PROG LOAD LOG --
Attaching fexit/fmod_ret to __noreturn functions is rejected.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20250318114447.75484-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Martin KaFai Lau
4131411f42 bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
[ Upstream commit f4edc66e48 ]

The current cgrp storage has a percpu counter, bpf_cgrp_storage_busy,
to detect potential deadlock at a spin_lock that the local storage
acquires during new storage creation.

There are false positives. It turns out to be too noisy in
production. For example, a bpf prog may be doing a
bpf_cgrp_storage_get on map_a. An IRQ comes in and triggers
another bpf_cgrp_storage_get on a different map_b. It will then
trigger the false positive deadlock check in the percpu counter.
On top of that, both are doing lookup only and no need to create
new storage, so practically it does not need to acquire
the spin_lock.

The bpf_task_storage_get already has a strategy to minimize this
false positive by only failing if the bpf_task_storage_get needs
to create a new storage and the percpu counter is busy. Creating
a new storage is the only time it must acquire the spin_lock.

This patch borrows the same idea. Unlike task storage that
has a separate variant for tracing (_recur) and non-tracing, this
patch stays with one bpf_cgrp_storage_get helper to keep it simple
for now in light of the upcoming res_spin_lock.

The variable could potentially use a better name noTbusy instead
of nobusy. This patch follows the same naming in
bpf_task_storage_get for now.

I have tested it by temporarily adding noinline to
the cgroup_storage_lookup(), traced it by fentry, and the fentry
program succeeded in calling bpf_cgrp_storage_get().

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250318182759.3676094-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Sewon Nam
46df1fe944 bpf: bpftool: Setting error code in do_loader()
[ Upstream commit 02a4694107 ]

We are missing setting error code in do_loader() when
bpf_object__open_file() fails. This means the command's exit status code
will be successful, even though the operation failed. So make sure to
return the correct error code. To maintain consistency with other
locations where bpf_object__open_file() is called, return -1.

  [0] Closes: https://github.com/libbpf/bpftool/issues/156

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sewon Nam <swnam0729@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/d3b5b4b4-19bb-4619-b4dd-86c958c4a367@stanley.mountain/t/#u
Link: https://lore.kernel.org/bpf/20250311031238.14865-1-swnam0729@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Haoxiang Li
ab57877603 s390/tty: Fix a potential memory leak bug
[ Upstream commit ad9bb8f049 ]

The check for get_zeroed_page() leads to a direct return
and overlooked the memory leak caused by loop allocation.
Add a free helper to free spaces allocated by get_zeroed_page().

Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218034104.2436469-1-haoxiang_li2024@163.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:16 +02:00
Haoxiang Li
3b3aa72636 s390/sclp: Add check for get_zeroed_page()
[ Upstream commit 3db42c75a9 ]

Add check for the return value of get_zeroed_page() in
sclp_console_init() to prevent null pointer dereference.
Furthermore, to solve the memory leak caused by the loop
allocation, add a free helper to do the free job.

Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218025216.2421548-1-haoxiang_li2024@163.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Yu-Chun Lin
6e026e6050 parisc: PDT: Fix missing prototype warning
[ Upstream commit b899981750 ]

As reported by the kernel test robot, the following error occurs:

arch/parisc/kernel/pdt.c:65:6: warning: no previous prototype for 'arch_report_meminfo' [-Wmissing-prototypes]
      65 | void arch_report_meminfo(struct seq_file *m)
         |      ^~~~~~~~~~~~~~~~~~~

arch_report_meminfo() is declared in include/linux/proc_fs.h and only
defined when CONFIG_PROC_FS is enabled. Wrap its definition in #ifdef
CONFIG_PROC_FS to fix the -Wmissing-prototypes warning.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502082315.IPaHaTyM-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Heiko Stuebner
4139072087 clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec()
[ Upstream commit b20150d499 ]

of_clk_get_hw_from_clkspec() checks all available clock-providers by
comparing their of nodes to the one from the clkspec. If no matching
clock provider is found, the function returns -EPROBE_DEFER to cause a
re-check at a later date. If a matching clock provider is found, an
authoritative answer can be retrieved from it whether the clock exists
or not.

This does not take into account that the clock-provider may never
appear, because it's node is disabled. This can happen when a clock is
optional, provided by a separate block which never gets enabled.

One example of this happening is the rk3588's VOP, which has optional
additional display clocks coming from PLLs inside the hdmiphy blocks.
These can be used for better rates, but the system will also work
without them.

The problem around that is described in the followups to[1]. As we
already know the of node of the presumed clock provider, add a check via
of_device_is_available() whether this is a "valid" device node. This
prevents eternal defer loops.

Link: https://lore.kernel.org/dri-devel/20250215-vop2-hdmi1-disp-modes-v1-3-81962a7151d6@collabora.com/ [1]
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250222223733.2990179-1-heiko@sntech.de
[sboyd@kernel.org: Reword commit text a bit]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Alexei Starovoitov
c5c833f637 bpf: Fix deadlock between rcu_tasks_trace and event_mutex.
[ Upstream commit 4580f4e0eb ]

Fix the following deadlock:
CPU A
_free_event()
  perf_kprobe_destroy()
    mutex_lock(&event_mutex)
      perf_trace_event_unreg()
        synchronize_rcu_tasks_trace()

There are several paths where _free_event() grabs event_mutex
and calls sync_rcu_tasks_trace. Above is one such case.

CPU B
bpf_prog_test_run_syscall()
  rcu_read_lock_trace()
    bpf_prog_run_pin_on_cpu()
      bpf_prog_load()
        bpf_tracing_func_proto()
          trace_set_clr_event()
            mutex_lock(&event_mutex)

Delegate trace_set_clr_event() to workqueue to avoid
such lock dependency.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250224221637.4780-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Yonghong Song
7758e308ae bpf: Fix kmemleak warning for percpu hashmap
[ Upstream commit 11ba7ce076 ]

Vlad Poenaru reported the following kmemleak issue:

  unreferenced object 0x606fd7c44ac8 (size 32):
    backtrace (crc 0):
      pcpu_alloc_noprof+0x730/0xeb0
      bpf_map_alloc_percpu+0x69/0xc0
      prealloc_init+0x9d/0x1b0
      htab_map_alloc+0x363/0x510
      map_create+0x215/0x3a0
      __sys_bpf+0x16b/0x3e0
      __x64_sys_bpf+0x18/0x20
      do_syscall_64+0x7b/0x150
      entry_SYSCALL_64_after_hwframe+0x4b/0x53

Further investigation shows the reason is due to not 8-byte aligned
store of percpu pointer in htab_elem_set_ptr():
  *(void __percpu **)(l->key + key_size) = pptr;

Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size
is 4, that means pptr is stored in a location which is 4 byte aligned but
not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based
on 8 byte stride, so it won't detect above pptr, hence reporting the memory
leak.

In htab_map_alloc(), we already have

        htab->elem_size = sizeof(struct htab_elem) +
                          round_up(htab->map.key_size, 8);
        if (percpu)
                htab->elem_size += sizeof(void *);
        else
                htab->elem_size += round_up(htab->map.value_size, 8);

So storing pptr with 8-byte alignment won't cause any problem and can fix
kmemleak too.

The issue can be reproduced with bpf selftest as well:
  1. Enable CONFIG_DEBUG_KMEMLEAK config
  2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c.
     The purpose is to keep map available so kmemleak can be detected.
  3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.

Reported-by: Vlad Poenaru <thevlad@meta.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250224175514.2207227-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Herbert Xu
0486de3c1b crypto: null - Use spin lock instead of mutex
[ Upstream commit dcc47a028c ]

As the null algorithm may be freed in softirq context through
af_alg, use spin locks instead of mutexes to protect the default
null algorithm.

Reported-by: syzbot+b3e02953598f447d4d2a@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Herbert Xu
0195abab4a crypto: lib/Kconfig - Fix lib built-in failure when arch is modular
[ Upstream commit 1047e21aec ]

The HAVE_ARCH Kconfig options in lib/crypto try to solve the
modular versus built-in problem, but it still fails when the
the LIB option (e.g., CRYPTO_LIB_CURVE25519) is selected externally.

Fix this by introducing a level of indirection with ARCH_MAY_HAVE
Kconfig options, these then go on to select the ARCH_HAVE options
if the ARCH Kconfig options matches that of the LIB option.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501230223.ikroNDr1-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:15 +02:00
Devaraj Rangasamy
fbea0efa8a crypto: ccp - Add support for PCI device 0x1134
[ Upstream commit 6cb345939b ]

PCI device 0x1134 shares same register features as PCI device 0x17E0.
Hence reuse same data for the new PCI device ID 0x1134.

Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:14 +02:00
Gregory CLEMENT
eea7d57c4a MIPS: cm: Detect CM quirks from device tree
[ Upstream commit e27fbe16af ]

Some information that should be retrieved at runtime for the Coherence
Manager can be either absent or wrong. This patch allows checking if
some of this information is available from the device tree and updates
the internal variable accordingly.

For now, only the compatible string associated with the broken HCI is
being retrieved.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:14 +02:00
Dmitry Mastykin
3da0371494 pinctrl: mcp23s08: Get rid of spurious level interrupts
[ Upstream commit 7b0671b97f ]

irq_mask()/irq_unmask() are not called for nested interrupts. So level
interrupts are never masked, chip's interrupt output is not cleared on
INTCAP or GPIO read, the irq handler is uselessly called again. Nested
irq handler is not called again, because interrupt reason is cleared by
its first call.
/proc/interrupts shows that number of chip's irqs is greater than
number of nested irqs.

This patch adds masking and unmasking level interrupts inside irq handler.

Signed-off-by: Dmitry Mastykin <mastichi@gmail.com>
Link: https://lore.kernel.org/20250122120504.1279790-1-mastichi@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:14 +02:00
Chenyuan Yang
d00d598027 pinctrl: renesas: rza2: Fix potential NULL pointer dereference
[ Upstream commit f752ee5b5b ]

`chip.label` in rza2_gpio_register() could be NULL.
Add the missing check.

Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/20250210232552.1545887-1-chenyuan0y@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:14 +02:00
Amery Hung
1badc279b4 selftests/bpf: Fix stdout race condition in traffic monitor
[ Upstream commit b99f27e902 ]

Fix a race condition between the main test_progs thread and the traffic
monitoring thread. The traffic monitor thread tries to print a line
using multiple printf and use flockfile() to prevent the line from being
torn apart. Meanwhile, the main thread doing io redirection can reassign
or close stdout when going through tests. A deadlock as shown below can
happen.

       main                      traffic_monitor_thread
       ====                      ======================
                                 show_transport()
                                 -> flockfile(stdout)

stdio_hijack_init()
-> stdout = open_memstream(log_buf, log_cnt);
   ...
   env.subtest_state->stdout_saved = stdout;

                                    ...
                                    funlockfile(stdout)
stdio_restore_cleanup()
-> fclose(env.subtest_state->stdout_saved);

After the traffic monitor thread lock stdout, A new memstream can be
assigned to stdout by the main thread. Therefore, the traffic monitor
thread later will not be able to unlock the original stdout. As the
main thread tries to access the old stdout, it will hang indefinitely
as it is still locked by the traffic monitor thread.

The deadlock can be reproduced by running test_progs repeatedly with
traffic monitor enabled:

for ((i=1;i<=100;i++)); do
  ./test_progs -a flow_dissector_skb* -m '*'
done

Fix this by only calling printf once and remove flockfile()/funlockfile().

Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02 07:59:14 +02:00
Oliver Neukum
caa559d3f7 USB: wdm: add annotation
commit 73e9cc1ffd upstream.

This is not understandable without a comment on endianness

Fixes: afba937e54 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250401084749.175246-5-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:14 +02:00
Oliver Neukum
b8bf49f3f6 USB: wdm: wdm_wwan_port_tx_complete mutex in atomic context
commit 1fdc4dca35 upstream.

wdm_wwan_port_tx_complete is called from a completion
handler with irqs disabled and possible in IRQ context
usb_autopm_put_interface can take a mutex.
Hence usb_autopm_put_interface_async must be used.

Fixes: cac6fb015f ("usb: class: cdc-wdm: WWAN framework integration")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250401084749.175246-4-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Oliver Neukum
52ae15c665 USB: wdm: close race between wdm_open and wdm_wwan_port_stop
commit c1846ed4eb upstream.

Clearing WDM_WWAN_IN_USE must be the last action or
we can open a chardev whose URBs are still poisoned

Fixes: cac6fb015f ("usb: class: cdc-wdm: WWAN framework integration")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250401084749.175246-3-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Oliver Neukum
eb4973cf6b USB: wdm: handle IO errors in wdm_wwan_port_start
commit 9697f5efcf upstream.

In case submitting the URB fails we must undo
what we've done so far.

Fixes: cac6fb015f ("usb: class: cdc-wdm: WWAN framework integration")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250401084749.175246-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Oliver Neukum
3e52ae347e USB: VLI disk crashes if LPM is used
commit e00b39a4f3 upstream.

This device needs the NO_LPM quirk.

Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250408135800.792515-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Miao Li
d85b7af3bd usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive
commit 37ffdbd695 upstream.

The SanDisk 3.2Gen1 Flash Drive, which VID:PID is in 0781:55a3,
just like Silicon Motion Flash Drive:
https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
also needs the DELAY_INIT quirk, or it will randomly work incorrectly
(e.g.: lsusb and can't list this device info) when connecting Huawei
hisi platforms and doing thousand of reboot test circles.

Cc: stable <stable@kernel.org>
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Link: https://lore.kernel.org/r/20250414062935.159024-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Miao Li
9924ee1bcd usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive
commit 2932b6b547 upstream.

Silicon Motion Flash Drive connects to Huawei hisi platforms and
performs a system reboot test for two thousand circles, it will
randomly work incorrectly on boot, set DELAY_INIT quirk can workaround
this issue.

Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Mike Looijmans
694fdc6a9c usb: dwc3: xilinx: Prevent spike in reset signal
commit 38d6e60b6f upstream.

The "reset" GPIO controls the RESET signal to an external, usually
ULPI PHY, chip. The original code path acquires the signal in LOW
state, and then immediately asserts it HIGH again, if the reset
signal defaulted to asserted, there'd be a short "spike" before the
reset.

Here is what happens depending on the pre-existing state of the reset
signal:
Reset (previously asserted):   ~~~|_|~~~~|_______
Reset (previously deasserted): _____|~~~~|_______
                                  ^ ^    ^
                                  A B    C

At point A, the low going transition is because the reset line is
requested using GPIOD_OUT_LOW. If the line is successfully requested,
the first thing we do is set it high _without_ any delay. This is
point B. So, a glitch occurs between A and B.

Requesting the line using GPIOD_OUT_HIGH eliminates the A and B
transitions. Instead we get:

Reset (previously asserted)  : ~~~~~~~~~~|______
Reset (previously deasserted): ____|~~~~~|______
                                   ^     ^
                                   A     C

Where A and C are the points described above in the code. Point B
has been eliminated.

The issue was found during code inspection.

Also remove the cryptic "toggle ulpi .." comment.

Fixes: ca05b38252 ("usb: dwc3: xilinx: Add gpio-reset support")
Cc: stable <stable@kernel.org>
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250318064518.9320-1-mike.looijmans@topic.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:13 +02:00
Frode Isaksen
52a7c9d930 usb: dwc3: gadget: check that event count does not exceed event buffer length
commit 63ccd26cd1 upstream.

The event count is read from register DWC3_GEVNTCOUNT.
There is a check for the count being zero, but not for exceeding the
event buffer length.
Check that event count does not exceed event buffer length,
avoiding an out-of-bounds access when memcpy'ing the event.
Crash log:
Unable to handle kernel paging request at virtual address ffffffc0129be000
pc : __memcpy+0x114/0x180
lr : dwc3_check_event_buf+0xec/0x348
x3 : 0000000000000030 x2 : 000000000000dfc4
x1 : ffffffc0129be000 x0 : ffffff87aad60080
Call trace:
__memcpy+0x114/0x180
dwc3_interrupt+0x24/0x34

Signed-off-by: Frode Isaksen <frode@meta.com>
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250403072907.448524-1-fisaksen@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02 07:59:12 +02:00