[ Upstream commit 172c034264 ]
Previously the offload of the rule with header rewrite and mirror to
both internal and external destinations is skipped if the encap entry
is not valid. But it shouldn't because driver will try to offload it
again if neighbor is updated and encap entry is valid, to replace the
old FTE added for slow path. But the extra split attr doesn't exist at
that time as the process is skipped, driver then fails to offload it.
To fix this issue, remove the checking and continue the attr process
if encap entry is invalid.
Fixes: b11bde5624 ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d1a04f347 ]
Initialize the source MAC address when creating the default GID entry.
Since this entry is used only for loopback traffic, it only needs to
be a unicast address. A zeroed-out MAC address is sufficient for this
purpose.
Without this fix, random bits would be assigned as the source address.
If these bits formed a multicast address, the firmware would return an
error, preventing the user from switching to switchdev mode:
Error: mlx5_core: Failed setting eswitch to offloads.
kernel answers: Invalid argument
Fixes: 80f09dfc23 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eacc77a732 ]
Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels
cannot be combined, but the match params interface does not have fields
for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses
tunnel_header_0.
Allow matching on both VNI and GBP by matching the VNI with a custom
tunnel header instead of the symbolic field name.
Matching solely on the VNI continues to use the symbolic field name.
Fixes: 74a778b4a6 ("net/mlx5: HWS, added definers handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1356ac774 ]
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bf0bdd1343 ("xdp: fix race on generic receive path")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 087a9eb9e5 ]
When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB
entry associated with the default remote (assuming one was configured)
is deleted without holding the hash lock. This is wrong and will result
in a warning [1] being generated by the lockdep annotation that was
added by commit ebe6420674 ("vxlan: Create wrappers for FDB lookup").
Reproducer:
# ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
# bridge vni add vni 10010 remote 198.51.100.1 dev vx0
# bridge vni del vni 10010 dev vx0
Fix by acquiring the hash lock before the deletion and releasing it
afterwards. Blame the original commit that introduced the issue rather
than the one that exposed it.
[1]
WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
<TASK>
__vxlan_fdb_delete+0xbe/0x560
vxlan_vni_delete_group+0x2ba/0x940
vxlan_vni_del.isra.0+0x15f/0x580
vxlan_process_vni_filter+0x38b/0x7b0
vxlan_vnifilter_process+0x3bb/0x510
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250423145131.513029-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3f506b78d ]
'commit b2accfe7ca ("powerpc/boot: Check for ld-option support")' suppressed
linker warnings, but the expressed used did not go well with POSIX shell (dash)
resulting with this warning
arch/powerpc/boot/wrapper: 237: [: 0: unexpected operator
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
Fix the check to handle the reported warning. Patch also fixes
couple of shellcheck reported errors for the same line.
In arch/powerpc/boot/wrapper line 237:
if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
^-- SC2046 (warning): Quote this to prevent word splitting.
^------^ SC2086 (info): Double quote to prevent globbing and word splitting.
^---------^ SC3020 (warning): In POSIX sh, &> is undefined.
Fixes: b2accfe7ca ("powerpc/boot: Check for ld-option support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250423082154.30625-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fb15ae3b0 ]
plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.
This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
<TASK>
probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
hub_port_connect drivers/usb/core/hub.c:5477 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
port_event drivers/usb/core/hub.c:5773 [inline]
hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
kthread+0x28d/0x320 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bf ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a17821321a ]
We can't rely on the SCRATCH register being 0 on platform that power
gate the NIC in S3. Even in those platforms, the SCRATCH register is
still returning 0x1010000.
Make sure that we understand that those platforms have powered off the
device.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Fixes: cb347bd29d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15220a2573 ]
Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.
Fix that by failing gracefully.
Fixes: e8bb19c1d5 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e21ea8149 ]
On x86_64 with gcc version 13.3.0, I compile kernel with:
make defconfig
./scripts/kconfig/merge_config.sh .config <(
echo CONFIG_COMPILE_TEST=y
)
make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"
Then I get a linker error:
ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions()
header stub for CONFIG_DRM_I915_PXP=n. Add it.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Fixes: 99afb7cc8c ("drm/i915/pxp: Add ARB session creation and cleanup")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b484c1e225)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 494d0939b1 ]
The speaker doesn't mute when plugged headphone.
This platform support 4ch speakers.
The speaker pin 0x14 wasn't fill verb table.
After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX.
The speaker can mute when headphone was plugged.
Fixes: aa8e3ef4fe ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/eb4c14a4d85740069c909e756bbacb0e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68715cb5c0 ]
mic_name returned by devm_kasprintf() could be NULL.
Add a check for it.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: bee2fe4467 ("ASoC: Intel: sof_sdw: use generic rtd_init function for Realtek SDW DMICs")
Link: https://patch.msgid.link/20250415194134.292830-1-chenyuan0y@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2accfe7ca ]
Commit 579aee9fc5 ("powerpc: suppress some linker warnings in recent linker versions")
enabled support to add linker option "--no-warn-rwx-segments",
if the version is greater than 2.39. Similar build warning were
reported recently from linker version 2.35.2.
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
ld: warning: arch/powerpc/boot/zImage.pseries has a LOAD segment with RWX permissions
Fix the warning by checking for "--no-warn-rwx-segments"
option support in linker to enable it, instead of checking
for the version range.
Fixes: 579aee9fc5 ("powerpc: suppress some linker warnings in recent linker versions")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/61cf556c-4947-4bd6-af63-892fc0966dad@linux.ibm.com/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250401004218.24869-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64c0ff0d5 ]
Currently if no group is matched and found, this function will return
the last grp to the caller, this is not expected, it is supposed to
return NULL in this case.
Fixes: e566fc11ea ("pinctrl: imx: use generic pinctrl helpers for managing groups")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/20250327031600.99723-1-hui.wang@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cf7e13fec ]
A vmemmap altmap is a device-provided region used to provide
backing storage for struct pages. For each namespace, the altmap
should belong to that same namespace. If the namespaces are
created unaligned, there is a chance that the section vmemmap
start address could also be unaligned. If the section vmemmap
start address is unaligned, the altmap page allocated from the
current namespace might be used by the previous namespace also.
During the free operation, since the altmap is shared between two
namespaces, the previous namespace may detect that the page does
not belong to its altmap and incorrectly assume that the page is a
normal page. It then attempts to free the normal page, which leads
to a kernel crash.
Kernel attempted to read user page (18) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000018
Faulting instruction address: 0xc000000000530c7c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G W
NIP: c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe
REGS: c000000015e57040 TRAP: 0300 Tainted: G W
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 84482404
CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0
GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040
GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f
GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000
GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020
GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00
GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff
GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040
NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0
LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0
Call Trace:
free_unref_page+0x50/0x1e0
free_reserved_page+0x40/0x68
free_vmemmap_pages+0x98/0xe0
remove_pte_table+0x164/0x1e8
remove_pmd_table+0x204/0x2c8
remove_pud_table+0x1c4/0x288
remove_pagetable+0x1c8/0x310
vmemmap_free+0x24/0x50
section_deactivate+0x28c/0x2a0
__remove_pages+0x84/0x110
arch_remove_memory+0x38/0x60
memunmap_pages+0x18c/0x3d0
devm_action_release+0x30/0x50
release_nodes+0x68/0x140
devres_release_group+0x100/0x190
dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat]
device_for_each_child+0x8c/0x100
[dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat]
nvdimm_bus_remove+0x78/0x140 [libnvdimm]
device_remove+0x70/0xd0
Another issue is that if there is no altmap, a PMD-sized vmemmap
page will be allocated from RAM, regardless of the alignment of
the section start address. If the section start address is not
aligned to the PMD size, a VM_BUG_ON will be triggered when
setting the PMD-sized page to page table.
In this patch, we are aligning the section vmemmap start address
to PAGE_SIZE. After alignment, the start address will not be
part of the current namespace, and a normal page will be allocated
for the vmemmap mapping of the current section. For the remaining
sections, altmaps will be allocated. During the free operation,
the normal page will be correctly freed.
In the same way, a PMD_SIZE vmemmap page will be allocated only if
the section start address is PMD_SIZE-aligned; otherwise, it will
fall back to a PAGE-sized vmemmap allocation.
Without this patch
==================
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------
| Altmap| Altmap | .....|Altmap| Altmap | ...........
| NS1 | NS1 | | NS2 | NS2 |
In the above scenario, NS1 and NS2 are two namespaces. The vmemmap
for NS1 comes from Altmap NS1, which belongs to NS1, and the
vmemmap for NS2 comes from Altmap NS2, which belongs to NS2.
The vmemmap start for NS2 is not aligned, so Altmap NS2 is shared
by both NS1 and NS2. During the free operation in NS1, Altmap NS2
is not part of NS1's altmap, causing it to attempt to free an
invalid page.
With this patch
===============
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------
| Altmap| Altmap | .....| Normal | Altmap | Altmap |.......
| NS1 | NS1 | | Page | NS2 | NS2 |
If the vmemmap start for NS2 is not aligned then we are allocating
a normal page. NS1 and NS2 vmemmap will be freed correctly.
Fixes: 368a0590d9 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Co-developed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8f98ec2b442977c618f7256cec88eb17dde3f2b9.1741609795.git.donettom@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aff2e8df2 ]
Issue:
When multiple audio streams share a common BE DAI, the BE DAI
widget can be powered up before its hardware parameters are configured.
This incorrect sequence leads to intermittent pcm_write errors.
For example, the below Tegra use-case throws an error:
aplay(2 streams) -> AMX(mux) -> ADX(demux) -> arecord(2 streams),
here, 'AMX TX' and 'ADX RX' are common BE DAIs.
For above usecase when failure happens below sequence is observed:
aplay(1) FE open()
- BE DAI callbacks added to the list
- BE DAI state = SND_SOC_DPCM_STATE_OPEN
aplay(2) FE open()
- BE DAI callbacks are not added to the list as the state is
already SND_SOC_DPCM_STATE_OPEN during aplay(1) FE open().
aplay(2) FE hw_params()
- BE DAI hw_params() callback ignored
aplay(2) FE prepare()
- Widget is powered ON without BE DAI hw_params() call
aplay(1) FE hw_params()
- BE DAI hw_params() is now called
Fix:
Add BE DAIs in the list if its state is either SND_SOC_DPCM_STATE_OPEN
or SND_SOC_DPCM_STATE_HW_PARAMS as well.
It ensures the widget is powered ON after BE DAI hw_params() callback.
Fixes: 0c25db3f76 ("ASoC: soc-pcm: Don't reconnect an already active BE")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250404105953.2784819-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96014d91cf ]
Depend on SND_SOC_CS_AMP_LIB instead of selecting it.
KUNIT_ALL_TESTS should only build tests for components that are
already being built, it should not cause other stuff to be added
to the build.
Fixes: 177862317a ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250411123608.1676462-3-rf@opensource.cirrus.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6eab703457 upstream.
On R-Car:
OF: /sound: Read of boolean property 'simple-audio-card,bitclock-master' with a value.
OF: /sound: Read of boolean property 'simple-audio-card,frame-master' with a value.
or:
OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'bitclock-master' with a value.
OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Replace testing for presence before calling of_property_read_u32() by
testing for an -EINVAL return value from the latter, to simplify the
code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/db10e96fbda121e7456d70e97a013cbfc9755f4d.1737533954.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ed0dc3fd3 upstream.
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5178c41bb upstream.
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b79028039f upstream.
Commit 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it. Consequently, the changes made by that commit
led to problems with setting policy limits.
Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.
Fixes: 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7491cdf46b upstream.
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 1517176906 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74c72419ec upstream.
SMB create requests issued via smb311_posix_mkdir() have an incorrect
length of zero bytes for the POSIX create context data. ksmbd server
rejects such requests and logs "cli req too short" causing mkdir to fail
with "invalid argument" on the client side. It also causes subsequent
rmmod to crash in cifs_destroy_request_bufs()
Inspection of packets sent by cifs.ko using wireshark show valid data for
the SMB2_POSIX_CREATE_CONTEXT is appended with the correct offset, but
with an incorrect length of zero bytes. Fails with ksmbd+cifs.ko only as
Windows server/client does not use POSIX extensions.
Fix smb311_posix_mkdir() to set req->CreateContextsLength as part of
appending the POSIX creation context to the request.
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fc9feff45 upstream.
The sess->user object can currently be in use by another thread, for
example if another connection has sent a session setup request to
bind to the session being free'd. The handler for that connection could
be in the smb2_sess_setup function which makes use of sess->user.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e86e9134e1 upstream.
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1f46c99d9 upstream.
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d6955ed76 upstream.
In certain situations, the sysfs for uncore may not be present when all
CPUs in a package are offlined and then brought back online after boot.
This issue can occur if there is an error in adding the sysfs entry due
to a memory allocation failure. Retrying to bring the CPUs online will
not resolve the issue, as the uncore_cpu_mask is already set for the
package before the failure condition occurs.
This issue does not occur if the failure happens during module
initialization, as the module will fail to load in the event of any
error.
To address this, ensure that the uncore_cpu_mask is not set until the
successful return of uncore_freq_add_entry().
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f5595d5f0 upstream.
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c8a7c66c9 upstream.
On the Lenovo ThinkPad X201, when Intel VT-d is enabled in the BIOS, the
kernel boots with errors related to DMAR, the graphical interface appeared
quite choppy, and the system resets erratically within a minute after it
booted:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:02.0] fault addr 0xb97ff000
[fault reason 0x05] PTE Write access is not set
Upon comparing boot logs with VT-d on/off, I found that the Intel Calpella
quirk (`quirk_calpella_no_shadow_gtt()') correctly applied the igfx IOMMU
disable/quirk correctly:
pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU
for graphics
Whereas with VT-d on, it went into the "else" branch, which then
triggered the DMAR handling fault above:
... else if (!disable_igfx_iommu) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
iommu_set_dma_strict();
}
Now, this is not exactly scientific, but moving 0x0044 to quirk_iommu_igfx
seems to have fixed the aforementioned issue. Running a few `git blame'
runs on the function, I have found that the quirk was originally
introduced as a fix specific to ThinkPad X201:
commit 9eecabcb9a ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave
no shadow GTT space")
Which was later revised twice to the "else" branch we saw above:
- 2011: commit 6fbcfb3e46 ("intel-iommu: Workaround IOTLB hang on
Ironlake GPU")
- 2024: commit ba00196ca4 ("iommu/vt-d: Decouple igfx_off from graphic
identity mapping")
I'm uncertain whether further testings on this particular laptops were
done in 2011 and (honestly I'm not sure) 2024, but I would be happy to do
some distro-specific testing if that's what would be required to verify
this patch.
P.S., I also see IDs 0x0040, 0x0062, and 0x006a listed under the same
`quirk_calpella_no_shadow_gtt()' quirk, but I'm not sure how similar these
chipsets are (if they share the same issue with VT-d or even, indeed, if
this issue is specific to a bug in the Lenovo BIOS). With regards to
0x0062, it seems to be a Centrino wireless card, but not a chipset?
I have also listed a couple (distro and kernel) bug reports below as
references (some of them are from 7-8 years ago!), as they seem to be
similar issue found on different Westmere/Ironlake, Haswell, and Broadwell
hardware setups.
Cc: stable@vger.kernel.org
Fixes: 6fbcfb3e46 ("intel-iommu: Workaround IOTLB hang on Ironlake GPU")
Fixes: ba00196ca4 ("iommu/vt-d: Decouple igfx_off from graphic identity mapping")
Link: https://groups.google.com/g/qubes-users/c/4NP4goUds2c?pli=1
Link: https://bugs.archlinux.org/task/65362
Link: https://bbs.archlinux.org/viewtopic.php?id=230323
Reported-by: Wenhao Sun <weiguangtwk@outlook.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=197029
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20250415133330.12528-1-jeffbai@aosc.io
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12f7802197 upstream.
UBSan caught a bug with IOMMU SVA domains, where the reported exponent
value in __arm_smmu_tlb_inv_range() was >= 64.
__arm_smmu_tlb_inv_range() uses the domain's pgsize_bitmap to compute
the number of pages to invalidate and the invalidation range. Currently
arm_smmu_sva_domain_alloc() does not setup the iommu domain's
pgsize_bitmap. This leads to __ffs() on the value returning 64 and that
leads to undefined behaviour w.r.t. shift operations
Fix this by initializing the iommu_domain's pgsize_bitmap to PAGE_SIZE.
Effectively the code needs to use the smallest page size for
invalidation
Cc: stable@vger.kernel.org
Fixes: eb6c97647b ("iommu/arm-smmu-v3: Avoid constructing invalid range commands")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250412002354.3071449-1-balbirs@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
commit b00d24997a upstream.
ASPEED VGA card has two built-in devices:
0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)
0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)
Its toplogy looks like this:
+-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0 Sandisk Corp Device 5017
| +-01.0-[04]--
| +-02.0-[05]----00.0 NVIDIA Corporation Device
| +-03.0-[06-07]----00.0-[07]----00.0 ASPEED Technology, Inc. ASPEED Graphics Family
| +-04.0-[08]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
| \-05.0-[09]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
\-00.1 PMC-Sierra Inc. Device 4028
The IORT logic populaties two identical IDs into the fwspec->ids array via
DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().
Though the SMMU driver had been able to handle this situation since commit
563b5cbe33 ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that
got broken by the later commit cdf315f907 ("iommu/arm-smmu-v3: Maintain
a SID->device structure"), which ended up with allocating separate streams
with the same stuffing.
On a kernel prior to v6.15-rc1, there has been an overlooked warning:
pci 0008:07:00.0: vgaarb: setting as boot VGA device
pci 0008:07:00.0: vgaarb: bridge control possible
pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pcieport 0008:06:00.0: Adding to iommu group 14
ast 0008:07:00.0: stream 67328 already in tree <===== WARNING
ast 0008:07:00.0: enabling device (0002 -> 0003)
ast 0008:07:00.0: Using default configuration
ast 0008:07:00.0: AST 2600 detected
ast 0008:07:00.0: [drm] Using analog VGA
ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device
With v6.15-rc, since the commit bcb81ac6ae ("iommu: Get DT/ACPI parsing
into the proper probe path"), the error returned with the warning is moved
to the SMMU device probe flow:
arm_smmu_probe_device+0x15c/0x4c0
__iommu_probe_device+0x150/0x4f8
probe_iommu_group+0x44/0x80
bus_for_each_dev+0x7c/0x100
bus_iommu_probe+0x48/0x1a8
iommu_device_register+0xb8/0x178
arm_smmu_device_probe+0x1350/0x1db0
which then fails the entire SMMU driver probe:
pci 0008:06:00.0: Adding to iommu group 21
pci 0008:07:00.0: stream 67328 already in tree
arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
Since SMMU driver had been already expecting a potential duplicated Stream
ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master()
routine to ignore a duplicated ID from the fwspec->sids array as well.
Note: this has been failing the iommu_device_probe() since 2021, although a
recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to
fail the SMMU driver probe. Since nobody has cared about DMA Alias support,
leave that as it was but fix the fundamental iommu_device_probe() breakage.
Fixes: cdf315f907 ("iommu/arm-smmu-v3: Maintain a SID->device structure")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250415185620.504299-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dee308e4c upstream.
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
Link: https://lore.kernel.org/r/20250325092259.392844-1-Pavel.Paklov@cyberprotect.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32dce6b194 upstream.
Using "depends on" and "select" for the same Kconfig symbol is known to
cause circular dependencies (cmp. "Kconfig recursive dependency
limitations" in Documentation/kbuild/kconfig-language.rst.
DRM drivers are selecting drm helpers so do the same for
DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream
Asahi Linux tree:
error: recursive dependency detected!
symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER
symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
symbol DRM_ASAHI depends on RUST
symbol RUST depends on CALL_PADDING
symbol CALL_PADDING depends on OBJTOOL
symbol OBJTOOL is selected by STACK_VALIDATION
symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224
symbol <choice> unknown is visible depending on UNWINDER_GUESS
symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT
symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS
symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER
Fixes: 12a280c728 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79af0604eb upstream.
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cd)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a2a6c4281 upstream.
realloc_argv() was only updating the array size if it was called with
old_argv already allocated. The first time it was called to create an
argv array, it would allocate the array but return the array size as
zero. dm_split_args() would think that it couldn't store any arguments
in the array and would call realloc_argv() again, causing it to
reallocate the initial slots (this time using GPF_KERNEL) and finally
return a size. Aside from being wasteful, this could cause deadlocks on
targets that need to process messages without starting new IO. Instead,
realloc_argv should always update the allocated array size on success.
Fixes: a065192655 ("dm table: don't copy from a NULL pointer in realloc_argv()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a533c3e42 upstream.
If we use the 'B' mode and we have an invalit table line,
cancel_delayed_work_sync would trigger a warning. This commit avoids the
warning.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ed12ab131 upstream.
Commit:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e089e7b58 upstream.
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2 ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4426e6b4ec upstream.
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6b ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eac8ea8736 upstream.
Commit 61167ad5fe ("mm: pass nid to reserve_bootmem_region()") introduce
a way to set nid to all reserved region.
But there is a corner case it will leave some region with invalid nid.
When memblock_set_node() doubles the array of memblock.reserved, it may
lead to a new reserved region before current position. The new region
will be left with an invalid node id.
Repeat the process when detecting it.
Fixes: 61167ad5fe ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Yajun Deng <yajun.deng@linux.dev>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318071948.23854-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06eaa824fd upstream.
The second parameter of memblock_set_node() is size instead of end.
Since it iterates from lower address to higher address, finally the node
id is correct. But during the process, some of them are wrong.
Pass size instead of end.
Fixes: 61167ad5fe ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Yajun Deng <yajun.deng@linux.dev>
CC: stable@vger.kernel.org
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250318071948.23854-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38a05c0b87 upstream.
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04dd30f1b upstream.
According to the XGMAC specification, enabling features such as Layer 3
and Layer 4 Packet Filtering, Split Header and Virtualized Network support
automatically selects the IPC Full Checksum Offload Engine on the receive
side.
When RX checksum offload is disabled, these dependent features must also
be disabled to prevent abnormal behavior caused by mismatched feature
dependencies.
Ensure that toggling RX checksum offload (disabling or enabling) properly
disables or enables all dependent features, maintaining consistent and
expected behavior in the network device.
Cc: stable@vger.kernel.org
Fixes: 1a510ccf58 ("amd-xgbe: Add support for VXLAN offload capabilities")
Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58f6217e5d upstream.
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75aea4b065 upstream.
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 3374491619 ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
