commit e3e89178a9 upstream.
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ]
Fixes: 7ff6edf4fe ("x86/microcode/AMD: Fix mixed steppings support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250310144243.861978-1-revest@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5daa0c35a1 upstream.
The kernel cannot currently self-parse BTF containing Rust debug
information. pahole uses the language of the CU to determine whether to
filter out debug information when generating the BTF. When LTO is
enabled, Rust code can cross CU boundaries, resulting in Rust debug
information in CUs labeled as C. This results in a system which cannot
parse its own BTF.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Cc: stable@vger.kernel.org
Fixes: c1177979af ("btf, scripts: Exclude Rust CUs with pahole")
Link: https://lore.kernel.org/r/20250108-rust-btf-lto-incompat-v1-1-60243ff6d820@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff64846bee upstream.
ISO C's `aligned_alloc` is partially implementation-defined; on some
systems it inherits stricter requirements from POSIX's `posix_memalign`.
This causes the call added in commit dd09538fb4 ("rust: alloc:
implement `Cmalloc` in module allocator_test") to fail on macOS because
it doesn't meet the requirements of `posix_memalign`.
Adjust the call to meet the POSIX requirement and add a comment. This
fixes failures in `make rusttest` on macOS.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Cc: stable@vger.kernel.org
Fixes: dd09538fb4 ("rust: alloc: implement `Cmalloc` in module allocator_test")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250213-aligned-alloc-v7-1-d2a2d0be164b@gmail.com
[ Added Cc: stable. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 374908a15a upstream.
In commit 392e34b6bc ("kbuild: rust: remove the `alloc` crate and
`GlobalAlloc`") we stopped using the upstream `alloc` crate.
Thus remove a few leftover mentions treewide.
Cc: stable@vger.kernel.org # Also to 6.12.y after the `alloc` backport lands
Fixes: 392e34b6bc ("kbuild: rust: remove the `alloc` crate and `GlobalAlloc`")
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250303171030.1081134-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 966944f371 upstream.
Currently, dynamically allocated LockCLassKeys can be used from the Rust
side without having them registered. This is a soundness issue, so
remove them.
Fixes: 6ea5aa0885 ("rust: sync: introduce `LockClassKey`")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307232717.1759087-11-boqun.feng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a665fe3d9 upstream.
The device id entries for Telit FN990B ended up matching only on the
interface protocol. While this works, the protocol is qualified by the
interface class (and subclass) which should have been included.
Switch to matching using USB_DEVICE_AND_INTERFACE_INFO() while keeping
the entries sorted also by protocol for consistency.
Link: https://lore.kernel.org/20250227110655.3647028-2-fabio.porcedda@gmail.com/
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6232f0d8e1 upstream.
The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18e0885bd2 upstream.
The Altera USB Blaster 3, available as both a cable and an on-board
solution, is primarily used for programming and debugging FPGAs.
It interfaces with host software such as Quartus Programmer,
System Console, SignalTap, and Nios Debugger. The device utilizes
either an FT2232 or FT4232 chip.
Enabling the support for various configurations of the on-board
USB Blaster 3 by including the appropriate VID/PID pairs,
allowing it to function as a serial device via ftdi_sio.
Note that this check-in does not include support for the
cable solution, as it does not support UART functionality.
The supported configurations are determined by the
hardware design and include:
1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART
2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART
3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART
4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART
5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART
6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART
7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART
8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART
These configurations allow for flexibility in how the USB Blaster 3 is
used, depending on the specific needs of the hardware design.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d85862ccca upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75ee4ebebb upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ed468e17d upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 729d163232 upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 659a7614dd upstream.
The QH controller is actually the controller of the Legion Go S, with
the manufacturer string wch.cn and product name Legion Go S in its
USB descriptor. A cursory lookup of the VID reveals the same.
Therefore, rename the xpad entries to match.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95a54a96f6 upstream.
TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile.
It poses a unique feature: it does not have a display. Instead, the
handheld is essentially a pc in a controller. As customary, it has an
xpad endpoint, a keyboard endpoint, and a vendor endpoint for its
vendor software.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 709329c482 upstream.
ZOTAC Gaming Zone is ZOTAC's 2024 handheld release. As it is common
with these handhelds, it uses a hybrid USB device with an xpad
endpoint, a keyboard endpoint, and a vendor-specific endpoint for
RGB control et al.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-2-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2add51331 upstream.
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9ccb88f53 upstream.
commit 767d83361a ("Input: ads7846 - Convert to use software nodes")
has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.
Fixes: 767d83361a ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b00110593 upstream.
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cad3fc0a4c ]
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f48660667 ]
WSL socket, fifo, char and block devices have empty reparse buffer.
Validate the length of the reparse buffer.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: cad3fc0a4c ("cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb380909ae ]
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b654f7a51f ]
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77e45145e3 ]
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
3300685893 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb4 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9c ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa985 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff2 ("mt76: disable BH around napi_schedule() calls")
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e589 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec84 ("mlx4: do not call napi_schedule() without care")
ec13ee8014 ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db75a16813 ]
Recently, some fallback have been initiated, while the connection was
not supposed to fallback.
Add a safety check with a warning to detect when an wrong attempt to
fallback is being done. This should help detecting any future issues
quicker.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9de7695925 ]
When both of X86_LOCAL_APIC and X86_THERMAL_VECTOR are disabled,
the irq tracing produces a W=1 build warning for the tracing
definitions:
In file included from include/trace/trace_events.h:27,
from include/trace/define_trace.h:113,
from arch/x86/include/asm/trace/irq_vectors.h:383,
from arch/x86/kernel/irq.c:29:
include/trace/stages/init.h:2:23: error: 'str__irq_vectors__trace_system_name' defined but not used [-Werror=unused-const-variable=]
Make the tracepoints conditional on the same symbosl that guard
their usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225213236.3141752-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96f41f644c ]
There are cases when it is useful to use both ACPI and DTB provided by
the bootloader, however in such cases we should make sure to prevent
conflicts between the two. Namely, don't try to use DTB for SMP setup
if ACPI is enabled.
Precisely, this prevents at least:
- incorrectly calling register_lapic_address(APIC_DEFAULT_PHYS_BASE)
after the LAPIC was already successfully enumerated via ACPI, causing
noisy kernel warnings and probably potential real issues as well
- failed IOAPIC setup in the case when IOAPIC is enumerated via mptable
instead of ACPI (e.g. with acpi=noirq), due to
mpparse_parse_smp_config() overridden by x86_dtb_parse_smp_config()
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250105172741.3476758-2-dmaluka@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26b24b2e2 ]
Freqency mode is the current default mode of Linux perf. A period of 1 is
used as a starting period. The period is auto-adjusted on each tick or an
overflow, to meet the frequency target.
The start period of 1 is too low and may trigger some issues:
- Many HWs do not support period 1 well.
https://lore.kernel.org/lkml/875xs2oh69.ffs@tglx/
- For an event that occurs frequently, period 1 is too far away from the
real period. Lots of samples are generated at the beginning.
The distribution of samples may not be even.
- A low starting period for frequently occurring events also challenges
virtualization, which has a longer path to handle a PMI.
The limit_period value only checks the minimum acceptable value for HW.
It cannot be used to set the start period, because some events may
need a very low period. The limit_period cannot be set too high. It
doesn't help with the events that occur frequently.
It's hard to find a universal starting period for all events. The idea
implemented by this patch is to only give an estimate for the popular
HW and HW cache events. For the rest of the events, start from the lowest
possible recommended value.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250117151913.3043942-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ec43c58d3 ]
fixp2int always rounds down, fixp2int_ceil rounds up. We need
the new fixp2int_round.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220043410.416867-3-alex.hung@amd.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56a6772935 ]
Currently, we assume that the PCH DMIC pins are pin-muxed with SoundWire
links. However, we do see a HW design that use PCH DMIC along with 3
SoundWire links. Remove the check now.
With this change the PCM DMIC will be presented if it is reported by the
BIOS irrespective of whether there are SDW links present or not.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250225093716.67240-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d31babd7e3 ]
Some tools like KGraphViewer interpret the "ON" nodes not having an
explicitly set fill colour as them being entirely black, which obscures
the text on them and looks funny. In fact, I thought they were off for
the longest time. Comparing to the output of the `dot` tool, I assume
they are supposed to be white.
Instead of speclawyering over who's in the wrong and must immediately
atone for their wickedness at the altar of RFC2119, just be explicit
about it, set the fillcolor to white, and nobody gets confused.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250221-dapm-graph-node-colour-v1-1-514ed0aa7069@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4c173dfbb ]
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5468beeab ]
TX launch polarity needs to be the opposite of RX capture polarity, to
generate the right bit slot alignment.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 579cd64b9d ]
The scale starts at -100dB, not -128dB.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2770-v1-1-cf50ff1d59a3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ab90f4012 ]
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20250123182234.597665-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2fe192348 ]
The fabric transports and also the PCI transport are not entering the
LIVE state from NEW or RESETTING. This makes the state machine more
restrictive and allows to catch not supported state transitions, e.g.
directly switching from RESETTING to LIVE.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 606572eb22 ]
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b587fd1286 ]
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3988ac1c67 ]
The queue state checking in nvmet_rdma_recv_done is not in queue state
lock.Queue state can transfer to LIVE in cm establish handler between
state checking and state lock here, cause a silent drop of nvme connect
cmd.
Recheck queue state whether in LIVE state in state lock to prevent this
issue.
Signed-off-by: Ruozhu Li <david.li@jaguarmicro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcd8754458 ]
In order for two Acer FA100 SSDs to work in one PC (in the case of
myself, a Lenovo Legion T5 28IMB05), and not show one drive and not
the other, and sometimes mix up what drive shows up (randomly), these
two lines of code need to be added, and then both of the SSDs will
show up and not conflict when booting off of one of them. If you boot
up your computer with both SSDs installed without this patch, you may
also randomly get into a kernel panic (if the initrd is not set up) or
stuck in the initrd "/init" process, it is set up, however, if you do
apply this patch, there should not be problems with booting or seeing
both contents of the drive. Tested with the btrfs filesystem with a
RAID configuration of having the root drive '/' combined to make two
256GB Acer FA100 SSDs become 512GB in total storage.
Kernel Logs with patch applied (`dmesg -t | grep -i nvm`):
```
...
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:04:00.0
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:05:00.0
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme1: allocated 64 MiB host memory buffer.
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: Ignoring bogus Namespace Identifiers
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme0: Ignoring bogus Namespace Identifiers
nvme0n1: p1 p2
...
```
Kernel Logs with patch not applied (`dmesg -t | grep -i nvm`):
```
...
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:04:00.0
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:05:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme1: allocated 64 MiB host memory buffer.
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: globally duplicate IDs for nsid 1
nvme nvme1: VID:DID 1dbe:5216 model:Acer SSD FA100 256GB firmware:1.Z.J.2X
nvme0n1: p1 p2
...
```
Signed-off-by: Christopher Lentocha <christopherericlentocha@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13918315c5 ]
When io_uring submission goes async for the first time on a given task,
we'll try to create a worker thread to handle the submission. Creating
this worker thread can fail due to various transient conditions, such as
an outstanding signal in the forking thread, so we have retry logic with
a limit of 3 retries. However, this retry logic appears to be too
aggressive/fast - we've observed a thread blowing through the retry
limit while having the same outstanding signal the whole time. Here's an
excerpt of some tracing that demonstrates the issue:
First, signal 26 is generated for the process. It ends up getting routed
to thread 92942.
0) cbd-92284 /* signal_generate: sig=26 errno=0 code=-2 comm=psblkdASD pid=92934 grp=1 res=0 */
This causes create_io_thread in the signalled thread to fail with
ERESTARTNOINTR, and thus a retry is queued.
13) task_th-92942 /* io_uring_queue_async_work: ring 000000007325c9ae, request 0000000080c96d8e, user_data 0x0, opcode URING_CMD, flags 0x8240001, normal queue, work 000000006e96dd3f */
13) task_th-92942 io_wq_enqueue() {
13) task_th-92942 _raw_spin_lock();
13) task_th-92942 io_wq_activate_free_worker();
13) task_th-92942 _raw_spin_lock();
13) task_th-92942 create_io_worker() {
13) task_th-92942 __kmalloc_cache_noprof();
13) task_th-92942 __init_swait_queue_head();
13) task_th-92942 kprobe_ftrace_handler() {
13) task_th-92942 get_kprobe();
13) task_th-92942 aggr_pre_handler() {
13) task_th-92942 pre_handler_kretprobe();
13) task_th-92942 /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942 } /* aggr_pre_handler */
...
13) task_th-92942 } /* copy_process */
13) task_th-92942 } /* create_io_thread */
13) task_th-92942 kretprobe_rethook_handler() {
13) task_th-92942 /* create_exit: (create_io_worker+0x8a/0x1a0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942 } /* kretprobe_rethook_handler */
13) task_th-92942 queue_work_on() {
...
The CPU is then handed to a kworker to process the queued retry:
------------------------------------------
13) task_th-92942 => kworker-54154
------------------------------------------
13) kworker-54154 io_workqueue_create() {
13) kworker-54154 io_queue_worker_create() {
13) kworker-54154 task_work_add() {
13) kworker-54154 wake_up_state() {
13) kworker-54154 try_to_wake_up() {
13) kworker-54154 _raw_spin_lock_irqsave();
13) kworker-54154 _raw_spin_unlock_irqrestore();
13) kworker-54154 } /* try_to_wake_up */
13) kworker-54154 } /* wake_up_state */
13) kworker-54154 kick_process();
13) kworker-54154 } /* task_work_add */
13) kworker-54154 } /* io_queue_worker_create */
13) kworker-54154 } /* io_workqueue_create */
And then we immediately switch back to the original task to try creating
a worker again. This fails, because the original task still hasn't
handled its signal.
-----------------------------------------
13) kworker-54154 => task_th-92942
------------------------------------------
13) task_th-92942 create_worker_cont() {
13) task_th-92942 kprobe_ftrace_handler() {
13) task_th-92942 get_kprobe();
13) task_th-92942 aggr_pre_handler() {
13) task_th-92942 pre_handler_kretprobe();
13) task_th-92942 /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942 } /* aggr_pre_handler */
13) task_th-92942 } /* kprobe_ftrace_handler */
13) task_th-92942 create_io_thread() {
13) task_th-92942 copy_process() {
13) task_th-92942 task_active_pid_ns();
13) task_th-92942 _raw_spin_lock_irq();
13) task_th-92942 recalc_sigpending();
13) task_th-92942 _raw_spin_lock_irq();
13) task_th-92942 } /* copy_process */
13) task_th-92942 } /* create_io_thread */
13) task_th-92942 kretprobe_rethook_handler() {
13) task_th-92942 /* create_exit: (create_worker_cont+0x35/0x1b0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942 } /* kretprobe_rethook_handler */
13) task_th-92942 io_worker_release();
13) task_th-92942 queue_work_on() {
13) task_th-92942 clear_pending_if_disabled();
13) task_th-92942 __queue_work() {
13) task_th-92942 } /* __queue_work */
13) task_th-92942 } /* queue_work_on */
13) task_th-92942 } /* create_worker_cont */
The pattern repeats another couple times until we blow through the retry
counter, at which point we give up. All outstanding work is canceled,
and the io_uring command which triggered all this is failed with
ECANCELED:
13) task_th-92942 io_acct_cancel_pending_work() {
...
13) task_th-92942 /* io_uring_complete: ring 000000007325c9ae, req 0000000080c96d8e, user_data 0x0, result -125, cflags 0x0 extra1 0 extra2 0 */
Finally, the task gets around to processing its outstanding signal 26,
but it's too late.
13) task_th-92942 /* signal_deliver: sig=26 errno=0 code=-2 sa_handler=59566a0 sa_flags=14000000 */
Try to address this issue by adding a small scaling delay when retrying
worker creation. This should give the forking thread time to handle its
signal in the above case. This isn't a particularly satisfying solution,
as sufficiently paradoxical scheduling would still have us hitting the
same issue, and I'm open to suggestions for something better. But this
is likely to prevent this (already rare) issue from hitting in practice.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250208-wq_retry-v2-1-4f6f5041d303@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d1fac6d26 ]
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is
constantly being filled with errors related to a "sequence number glitch",
e.g.:
[ 1903.284538] sequence number glitch prev=16 curr=0
[ 1913.812205] sequence number glitch prev=50 curr=0
[ 1923.698219] sequence number glitch prev=142 curr=0
[ 2029.248276] sequence number glitch prev=1555 curr=0
[ 2046.333059] sequence number glitch prev=70 curr=0
[ 2076.520067] sequence number glitch prev=272 curr=0
[ 2158.704202] sequence number glitch prev=2655 curr=0
[ 2218.530776] sequence number glitch prev=2349 curr=0
[ 2225.579092] sequence number glitch prev=6 curr=0
Internet connectivity is working fine, so this error seems harmless. It
looks like modem does not preserve the sequence number when entering low
power state; the amount of errors depends on how actively the modem is
being used.
A similar issue has also been seen on USB-based MBIM modems [1]. However,
in cdc_ncm.c the "sequence number glitch" message is a debug message
instead of an error. Apply the same to the mhi_wwan_mbim.c driver to
silence these errors when using the modem.
[1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac84ca815a ]
In some cases, e.g. during resuming from suspend, there is a possibility
that some IPC reply messages get received by the host while the DSP
firmware has not yet reached the complete boot state.
Detect when this happens and do not attempt to process the unexpected
replies from DSP. Instead, provide proper debugging support.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-3-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
