Commit graph

1,396,687 commits

Author SHA1 Message Date
Josh Poimboeuf
48f1bbaf26 objtool: Avoid emptying lists for duplicate sections
When a to-be-created section already exists, there's no point in
emptying the various lists if their respective sections already exist.
In fact it's better to leave them intact as they might get used later.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:46:47 -07:00
Josh Poimboeuf
a040ab73df objtool: Simplify reloc offset calculation in unwind_read_hints()
Simplify the relocation offset calculation in unwind_read_hints(),
similar to other conversions which have already been done.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:46:47 -07:00
Josh Poimboeuf
a1526bcfcb objtool: Mark prefix functions
In preparation for the objtool klp diff subcommand, introduce a flag to
identify __pfx_*() and __cfi_*() functions in advance so they don't need
to be manually identified every time a check is needed.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:46:47 -07:00
Josh Poimboeuf
c9e9b85d41 objtool: Fix weak symbol hole detection for .cold functions
When ignore_unreachable_insn() looks for weak function holes which jump
to their .cold functions, it assumes the parent function comes before
the corresponding .cold function in the symbol table.  That's not
necessarily the case with -ffunction-sections.

Mark all the holes beforehand (including .cold functions) so the
ordering of the discovery doesn't matter.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:46:47 -07:00
Josh Poimboeuf
4ea029389b objtool: Mark .cold subfunctions
Introduce a flag to identify .cold subfunctions so they can be detected
easier and faster.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:46:46 -07:00
Josh Poimboeuf
25eac74b6b objtool: Add section/symbol type helpers
Add some helper macros to improve readability.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:25 -07:00
Josh Poimboeuf
96eceff331 objtool: Convert elf iterator macros to use 'struct elf'
'struct objtool_file' is specific to the check code and doesn't belong
in the elf code which is supposed to be objtool_file-agnostic.  Convert
the elf iterator macros to use 'struct elf' instead.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:25 -07:00
Josh Poimboeuf
72e4b6b44e objtool: Remove .parainstructions reference
The .parainstructions section no longer exists since the following
commit:

  60bc276b12 ("x86/paravirt: Switch mixed paravirt/alternative calls to alternatives").

Remove the reference to it.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
31eca25f3a objtool: Clean up compiler flag usage
KBUILD_HOSTCFLAGS and KBUILD_HOSTLDFLAGS aren't defined when objtool is
built standalone.  Also, the EXTRA_WARNINGS flags are rather arbitrary.

Make things simpler and more consistent by specifying compiler flags
explicitly and tweaking the warnings.  Also make a few code tweaks to
make the new warnings happy.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
34244f784c objtool: Const string cleanup
Use 'const char *' where applicable.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
3e4b5f66cf objtool: Check for missing annotation entries in read_annotate()
Add a sanity check to make sure none of the relocations for the
.discard.annotate_insn section have gone missing.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
4cdee7888f objtool: Fix "unexpected end of section" warning for alternatives
Due to the short circuiting logic in next_insn_to_validate(), control
flow may silently transition from .altinstr_replacement to .text without
a corresponding nested call to validate_branch().

As a result the validate_branch() 'sec' variable doesn't get
reinitialized, which can trigger a confusing "unexpected end of section"
warning which blames .altinstr_replacement rather than the offending
fallthrough function.

Fix that by not caching the section.  There's no point in doing that
anyway.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
68245893cf objtool: Fix __pa_symbol() relocation handling
__pa_symbol() generates a relocation which refers to a physical address.
Convert it to back its virtual form before calculating the addend.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
41d24d7858 objtool: Fix x86 addend calculation
On x86, arch_dest_reloc_offset() hardcodes the addend adjustment to
four, but the actual adjustment depends on the relocation type.  Fix
that.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:24 -07:00
Josh Poimboeuf
72567c630d objtool: Fix weak symbol detection
find_symbol_hole_containing() fails to find a symbol hole (aka stripped
weak symbol) if its section has no symbols before the hole.  This breaks
weak symbol detection if -ffunction-sections is enabled.

Fix that by allowing the interval tree to contain section symbols, which
are always at offset zero for a given section.

Fixes a bunch of (-ffunction-sections) warnings like:

  vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction

Fixes: 4adb236867 ("objtool: Ignore extra-symbol code")
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
c2a3e7af31 objtool: Fix interval tree insertion for zero-length symbols
Zero-length symbols get inserted in the wrong spot.  Fix that.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
81cf39be35 objtool: Add empty symbols to the symbol tree again
The following commit

  5da6aea375 ("objtool: Fix find_{symbol,func}_containing()")

fixed the issue where overlapping symbols weren't getting sorted
properly in the symbol tree.  Therefore the workaround to skip adding
empty symbols from the following commit

  a2e38dffcd ("objtool: Don't add empty symbols to the rbtree")

is no longer needed.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
4ac2ba35f6 objtool: Remove error handling boilerplate
Up to a certain point in objtool's execution, all errors are fatal and
return -1.  When propagating such errors, just return -1 directly
instead of trying to propagate the original return code.  This helps
make the code more compact and the behavior more explicit.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
2bb23cbf3f objtool: Propagate elf_truncate_section() error in elf_write()
Properly check and propagate the return value of elf_truncate_section()
to avoid silent failures.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
9ebb662fab objtool: Fix broken error handling in read_symbols()
The free(sym) call in the read_symbols() error path is fundamentally
broken: 'sym' doesn't point to any allocated block.  If triggered,
things would go from bad to worse.

Remove the free() and simplify the error paths.  Freeing memory isn't
necessary here anyway, these are fatal errors which lead to an immediate
exit().

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
07e1c3fd86 objtool: Make find_symbol_containing() less arbitrary
In the rare case of overlapping symbols, find_symbol_containing() just
returns the first one it finds.  Make it slightly less arbitrary by
returning the smallest symbol with size > 0.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:23 -07:00
Josh Poimboeuf
b37491d72b interval_tree: Fix ITSTATIC usage for *_subtree_search()
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:22 -07:00
Josh Poimboeuf
9b7eacac22 interval_tree: Sync interval_tree_generic.h with tools
The following commit made an improvement to interval_tree_generic.h, but
didn't sync it to the tools copy:

  1981128578 ("lib/interval_tree: skip the check before go to the right subtree")

Sync it, and add it to objtool's sync-check.sh so they are more likely
to stay in sync going forward.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:22 -07:00
Josh Poimboeuf
3049fc4b5f x86/alternative: Refactor INT3 call emulation selftest
The INT3 call emulation selftest is a bit fragile as it relies on the
compiler not inserting any extra instructions before the
int3_selftest_ip() definition.

Also, the int3_selftest_ip() symbol overlaps with the int3_selftest
symbol(), which can confuse objtool.

Fix those issues by slightly reworking the functionality and moving
int3_selftest_ip() to a separate asm function.  While at it, improve the
naming.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:22 -07:00
Josh Poimboeuf
4109043bff modpost: Ignore unresolved section bounds symbols
In preparation for klp-build livepatch module creation tooling,
suppress warnings for unresolved references to linker-generated
__start_* and __stop_* section bounds symbols.

These symbols are expected to be undefined when modpost runs, as they're
created later by the linker.

Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:22 -07:00
Josh Poimboeuf
6717e8f91d kbuild: Remove 'kmod_' prefix from __KBUILD_MODNAME
In preparation for the objtool klp diff subcommand, remove the arbitrary
'kmod_' prefix from __KBUILD_MODNAME and instead add it explicitly in
the __initcall_id() macro.

This change supports the standardization of "unique" symbol naming by
ensuring the non-unique portion of the name comes before the unique
part.  That will enable objtool to properly correlate symbols across
builds.

Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:22 -07:00
Josh Poimboeuf
c2d420796a elfnote: Change ELFNOTE() to use __UNIQUE_ID()
In preparation for the objtool klp diff subcommand, replace the custom
unique symbol name generation in ELFNOTE() with __UNIQUE_ID().

This standardizes the naming format for all "unique" symbols, which will
allow objtool to properly correlate them.  Note this also removes the
"one ELF note per line" limitation.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:22 -07:00
Josh Poimboeuf
9f14f1f918 compiler.h: Make addressable symbols less of an eyesore
Avoid underscore overload by changing:

  __UNIQUE_ID___addressable_loops_per_jiffy_868

to the following:

  __UNIQUE_ID_addressable_loops_per_jiffy_868

This matches the format used by other __UNIQUE_ID()-generated symbols
and improves readability for those who stare at ELF symbol table dumps.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Josh Poimboeuf
afb026b6d3 compiler: Tweak __UNIQUE_ID() naming
In preparation for the objtool klp diff subcommand, add an underscore
between the name and the counter.  This will make it possible for
objtool to distinguish between the non-unique and unique parts of the
symbol name so it can properly correlate the symbols.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Josh Poimboeuf
122679ebf9 x86/kprobes: Remove STACK_FRAME_NON_STANDARD annotation
Since commit 877b145f0f ("x86/kprobes: Move trampoline code into
RODATA"), the optprobe template code is no longer analyzed by objtool so
it doesn't need to be ignored.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Josh Poimboeuf
bf770d6d20 x86/module: Improve relocation error messages
Add the section number and reloc index to relocation error messages to
help find the faulty relocation.

Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Josh Poimboeuf
1ba9f89794 vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros
TEXT_MAIN, DATA_MAIN and friends are defined differently depending on
whether certain config options enable -ffunction-sections and/or
-fdata-sections.

There's no technical reason for that beyond voodoo coding.  Keeping the
separate implementations adds unnecessary complexity, fragments the
logic, and increases the risk of subtle bugs.

Unify the macros by using the same input section patterns across all
configs.

This is a prerequisite for the upcoming livepatch klp-build tooling
which will manually enable -ffunction-sections and -fdata-sections via
KCFLAGS.

Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Josh Poimboeuf
68e71067ec s390/vmlinux.lds.S: Prevent thunk functions from getting placed with normal text
The s390 indirect thunks are placed in the .text.__s390_indirect_jump_*
sections.

Certain config options which enable -ffunction-sections have a custom
version of the TEXT_TEXT macro:

  .text.[0-9a-zA-Z_]*

That unintentionally matches the thunk sections, causing them to get
grouped with normal text rather than being handled by their intended
rule later in the script:

  *(.text.*_indirect_*)

Fix that by adding another period to the thunk section names, following
the kernel's general convention for distinguishing code-generated text
sections from compiler-generated ones.

Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Dylan Hatch
be8374a5ba objtool: Fix standalone --hacks=jump_label
The objtool command line 'objtool --hacks=jump_label foo.o' on its own
should be expected to rewrite jump labels to NOPs. This means the
add_special_section_alts() code path needs to run when only this option
is provided.

This is mainly relevant in certain debugging situations, but could
potentially also fix kernel builds in which objtool is run with
--hacks=jump_label but without --orc, --stackval, --uaccess, or
--hacks=noinstr.

Fixes: de6fbcedf5 ("objtool: Read special sections with alts only when specific options are selected")
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:21 -07:00
Pankaj Raghav
ff5c046648 scripts/faddr2line: Fix "Argument list too long" error
The run_readelf() function reads the entire output of readelf into a
single shell variable. For large object files with extensive debug
information, the size of this variable can exceed the system's
command-line argument length limit.

When this variable is subsequently passed to sed via `echo "${out}"`, it
triggers an "Argument list too long" error, causing the script to fail.

Fix this by redirecting the output of readelf to a temporary file
instead of a variable. The sed commands are then modified to read from
this file, avoiding the argument length limitation entirely.

Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:20 -07:00
Pankaj Raghav
6b4679fcbf scripts/faddr2line: Use /usr/bin/env bash for portability
The shebang `#!/bin/bash` assumes a fixed path for the bash interpreter.
This path does not exist on some systems, such as NixOS, causing the
script to fail.

Replace `/bin/bash` with the more portable `#!/usr/bin/env bash`.

Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:20 -07:00
John Wang
567f9c428f scripts/faddr2line: Set LANG=C to enforce ASCII output
Force tools like readelf to use the POSIX/C locale by exporting LANG=C
This ensures ASCII-only output and avoids locale-specific
characters(e.g., UTF-8 symbols or translated strings), which could
break text processing utilities like sed in the script

Signed-off-by: John Wang <wangzq.jn@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:20 -07:00
Josh Poimboeuf
a808a2b35f tools build: Fix fixdep dependencies
The tools version of fixdep has broken dependencies.  It doesn't get
rebuilt if the host compiler or headers change.

Build fixdep with the tools kbuild infrastructure, so fixdep runs on
itself.  Due to the recursive dependency, its dependency file is
incomplete the very first time it gets built.  In that case build it a
second time to achieve fixdep inception.

Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:20 -07:00
Chen Ni
2e985fdb7e objtool: Remove unneeded semicolon
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-10-14 14:45:20 -07:00
Linus Torvalds
3a86608788 Linux 6.18-rc1 v6.18-rc1 2025-10-12 13:42:36 -07:00
Linus Torvalds
3dd7b81235 i2c-for-6.18-rc1-hotfix
One revert because of a regression in the I2C core which has sadly not
 showed up during its time in -next.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmjr9tcACgkQFA3kzBSg
 Kba5vw//THtxiX/oPd3RAvZED1Ud3gSynO97mJczG0oI/A2GybhLXS5cLaPsK1At
 pbFZBfBKE8sAZ4n99QZ0obHrqaw/73kd0giuSja+/xj8JxwpajbcktVzdLI1wljS
 JEgPjYmfsm9if77iNI1yJHKhQ5jFUIAJoUwrFkwiu21JMDIST06tZRlpM7aN7Aof
 bpzFinAyNM6HSCp2BRBjo4xCWWrGK59RBwal+bPCdGfPRwhyNaR6ROp72KuM5mEX
 Nv+jnJcPhFu+HI0YK1Ejyc3Ay129cwJtqtyePevJJK1gKMJnaS4E/S+1/77mwaoy
 /zdrFHjTK+M2vyh0iq7jnAwnK8aPiFN7PLB+LeHSFQ7hicHxLbsSquzc6F7E1ZwG
 m3M1bFDrjyLp6mzHWsjsl8Eltp082KXUOi2djBMbiH/CfROebJgYDOaq3L/zSUmp
 gU5U6IW1xHcHzCNStocDzQMIWNBEPY2823SdeDvKAP2/dVyRsC3SP9dxPV2LVHk2
 k246mUjKlkjx2fOmIQSz0rDTiQApqlhN9m47l5jt7LLdA+nxMpkk4qlxAspbqZbk
 Bx52bkKb/lsxOosaSJUVoicSqvfXR8LM0VpDfIpQvFfxqKSOX1ydWKjjtNDYsdEk
 dYqxP9abshRfUzHvGuS5kJqsFc2AUXPg9tljIYU6s6Pn9TSu6D0=
 =b0xy
 -----END PGP SIGNATURE-----

Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
 "One revert because of a regression in the I2C core which has sadly not
  showed up during its time in -next"

* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: boardinfo: Annotate code used in init phase only"
2025-10-12 13:27:56 -07:00
Linus Torvalds
8765f46791 - Skip interrupt ID 0 in sifive-plic during suspend/resume because ID 0 is
reserved and accessing reserved register space could result in undefined
   behavior
 
 - Fix a function's retval check in aspeed-scu-ic
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjrdesACgkQEsHwGGHe
 VUp2YBAArrV/gpawIM9ivoX8Fl2q6B8IdVIWVyHgfcNhVuDkivaWngUIV6fMTcY/
 j+EuDVCCS1UNOdK0+9j+t2Y/ybZ+c6hIbDiQo6MRGG38A5x1X0oT9657/fLysZzs
 6XOo+HF0d9bSoL1FWr6q3UEyUJrhT0kZgk1t81TcR22wSvLiiSBvKOH+GRuSECDm
 SUOLLQZMNbH1WTY7mLoZ7TzRNPLFFyb8xqeHb8IeffA1U1K7qPueQmzxTgXZVyLs
 snOdcmhLvR9eev7mIcD+1HbPtMwlkhhari0eHSmnbWWiiTKi4g7MOoudCJPu3jBW
 nzSmtMPT3PCMI3rnMQTMJIv6GyNi4zgu9gqsTpMP/elaAUjgbp4/D7p5XJrOL4SF
 oy62QTq8n2kkymQtkG/aa0mZI7cDeUuRLR1nI9avy/+sof6NJM86BbLnUTcQVGTB
 qa/VuKJdfcuSin//3Mw9+wP7DKLrLvMYn3+/v18vscAvayMNsUHAC5OuY3g7Wh5P
 YZstG7MtZ+EhHNvnIFlg0wQIZ3Vk3+EUuxq+RMkcJF7VCNP1eKv07Fe4T7luWGt8
 qqX3wfZFTNyQxqQSpmYNiR92K6RrWPp76jz700nZ24NQfZs8U1uAjzQgeYBj8c5j
 Du9Fx8A6mwMw28d9A/cFmQbcVi/M4pI1ctKd7/9o5H4/f6nutlI=
 =dVwm
 -----END PGP SIGNATURE-----

Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Skip interrupt ID 0 in sifive-plic during suspend/resume because
   ID 0 is reserved and accessing reserved register space could result
   in undefined behavior

 - Fix a function's retval check in aspeed-scu-ic

* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
  irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
2025-10-12 08:45:52 -07:00
Linus Torvalds
67029a49db tracing fixes for v6.18:
The previous fix to trace_marker required updating trace_marker_raw
 as well. The difference between trace_marker_raw from trace_marker
 is that the raw version is for applications to write binary structures
 directly into the ring buffer instead of writing ASCII strings.
 This is for applications that will read the raw data from the ring
 buffer and get the data structures directly. It's a bit quicker than
 using the ASCII version.
 
 Unfortunately, it appears that our test suite has several tests that
 test writes to the trace_marker file, but lacks any tests to the
 trace_marker_raw file (this needs to be remedied). Two issues came
 about the update to the trace_marker_raw file that syzbot found:
 
 - Fix tracing_mark_raw_write() to use per CPU buffer
 
   The fix to use the per CPU buffer to copy from user space was needed for
   both the trace_maker and trace_maker_raw file.
 
   The fix for reading from user space into per CPU buffers properly fixed
   the trace_marker write function, but the trace_marker_raw file wasn't
   fixed properly. The user space data was correctly written into the per CPU
   buffer, but the code that wrote into the ring buffer still used the user
   space pointer and not the per CPU buffer that had the user space data
   already written.
 
 - Stop the fortify string warning from writing into trace_marker_raw
 
   After converting the copy_from_user_nofault() into a memcpy(), another
   issue appeared. As writes to the trace_marker_raw expects binary data, the
   first entry is a 4 byte identifier. The entry structure is defined as:
 
   struct {
 	struct trace_entry ent;
 	int id;
 	char buf[];
   };
 
   The size of this structure is reserved on the ring buffer with:
 
     size = sizeof(*entry) + cnt;
 
   Then it is copied from the buffer into the ring buffer with:
 
     memcpy(&entry->id, buf, cnt);
 
   This use to be a copy_from_user_nofault(), but now converting it to
   a memcpy() triggers the fortify-string code, and causes a warning.
 
   The allocated space is actually more than what is copied, as the cnt
   used also includes the entry->id portion. Allocating sizeof(*entry)
   plus cnt is actually allocating 4 bytes more than what is needed.
 
   Change the size function to:
 
     size = struct_size(entry, buf, cnt - sizeof(entry->id));
 
   And update the memcpy() to unsafe_memcpy().
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOq0fhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4HAQCNbFEDjzNNEueCWLOptC5YfeJgdvPB
 399CzuFJl02ZOgD/flPJa1r+NaeYOBhe1BgpFF9FzB/SPXAXkXUGLM7WIgg=
 =goks
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:
 "The previous fix to trace_marker required updating trace_marker_raw as
  well. The difference between trace_marker_raw from trace_marker is
  that the raw version is for applications to write binary structures
  directly into the ring buffer instead of writing ASCII strings. This
  is for applications that will read the raw data from the ring buffer
  and get the data structures directly. It's a bit quicker than using
  the ASCII version.

  Unfortunately, it appears that our test suite has several tests that
  test writes to the trace_marker file, but lacks any tests to the
  trace_marker_raw file (this needs to be remedied). Two issues came
  about the update to the trace_marker_raw file that syzbot found:

   - Fix tracing_mark_raw_write() to use per CPU buffer

     The fix to use the per CPU buffer to copy from user space was
     needed for both the trace_maker and trace_maker_raw file.

     The fix for reading from user space into per CPU buffers properly
     fixed the trace_marker write function, but the trace_marker_raw
     file wasn't fixed properly. The user space data was correctly
     written into the per CPU buffer, but the code that wrote into the
     ring buffer still used the user space pointer and not the per CPU
     buffer that had the user space data already written.

   - Stop the fortify string warning from writing into trace_marker_raw

     After converting the copy_from_user_nofault() into a memcpy(),
     another issue appeared. As writes to the trace_marker_raw expects
     binary data, the first entry is a 4 byte identifier. The entry
     structure is defined as:

     struct {
   	struct trace_entry ent;
   	int id;
   	char buf[];
     };

     The size of this structure is reserved on the ring buffer with:

       size = sizeof(*entry) + cnt;

     Then it is copied from the buffer into the ring buffer with:

       memcpy(&entry->id, buf, cnt);

     This use to be a copy_from_user_nofault(), but now converting it to
     a memcpy() triggers the fortify-string code, and causes a warning.

     The allocated space is actually more than what is copied, as the
     cnt used also includes the entry->id portion. Allocating
     sizeof(*entry) plus cnt is actually allocating 4 bytes more than
     what is needed.

     Change the size function to:

       size = struct_size(entry, buf, cnt - sizeof(entry->id));

     And update the memcpy() to unsafe_memcpy()"

* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Stop fortify-string from warning in tracing_mark_raw_write()
  tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
2025-10-11 16:06:04 -07:00
Linus Torvalds
c04022dccb Kbuild fixes for 6.18 #1
- Fix UAPI types check in headers_check.pl
 
 - Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
 
 - Ignore fsync() error when output of gen_init_cpio is a pipe
 
 - Several little build fixes for recent modules.builtin.modinfo series
 
 Signed-off-by: Nathan Chancellor <nathan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaOqyGgAKCRAdayaRccAa
 lhIaAP4owzRbZv/KnwVgXt3IDlAN7tOJQyiNbuAOTTH9IewvhAEA24zfrlav7CQl
 WSc0d/poWAdmQJc0T/bdQ71G69j6dgQ=
 =ljuS
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux

Pull Kbuild fixes from Nathan Chancellor:

 - Fix UAPI types check in headers_check.pl

 - Only enable -Werror for hostprogs with CONFIG_WERROR / W=e

 - Ignore fsync() error when output of gen_init_cpio is a pipe

 - Several little build fixes for recent modules.builtin.modinfo series

* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
  kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
  s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
  kbuild: Add '.rel.*' strip pattern for vmlinux
  kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
  gen_init_cpio: Ignore fsync() returning EINVAL on pipes
  scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
  kbuild: uapi: Strip comments before size type check
2025-10-11 15:47:12 -07:00
Wolfram Sang
a8482d2c90 Revert "i2c: boardinfo: Annotate code used in init phase only"
This reverts commit 1a2b423be6 because we
got a regression report and need time to find out the details.

Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-10-11 23:57:33 +02:00
Linus Torvalds
98906f9d85 RTC for 6.18
Subsystem:
  - Fix race when setting alarm
  - Ensure alarm irq is enabled when UIE is enabled
  - remove unneeded 'fast_io' parameter in regmap_config
 
 New driver:
  - SpacemiT P1 RTC
 
 Drivers:
  - efi: Remove wakeup functionality
  - optee: add alarms support
  - s3c: Drop support for S3C2410
  - zynqmp: Restore alarm functionality after kexec transition
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmjqgaEACgkQY6TcMGxw
 OjK/uBAAskG29umNu0QmQYOdtihk45mOFe6DZgCgDoTKa+OcV26/Y0Nak2n13rzL
 j7yLYfiGf0IjghcrdfXwONHwYR2y0LoQBZK5i9klZYNkuabe9bqEq7k0t7RPc33D
 mgycZVHYgQh9Jx1DM4XAUKCyE08TJ4AjdybpXIhyJbovAgNcHbdZ+Zv/A+Kq3P+d
 AjaGjcuwQI/3tiVDgry4BfPrvK/UzPB1SblDnmFW6w7AyMjYgarXYCW9qDlm2NAM
 l0mr48XI1V0g3KNZ/1AhH/R79tyq/57lmu4ynS6FTIL6ppkyWu0yM86Xzr6xpVK7
 Xtb+BBGmB4lSKqmBVT3pM6iX14XKM3gYc4Dn9ZfvLwW1bVrMKfx0kIzzHn1pIgX0
 dSrwbhuJVrUCwqczUZ5Ul+D9i8tcLBL20RcbobdOEqxkkoS18gpIpqX5bGxCLSKM
 DEwewK2tP/VRWxFp57yUgzHdmEUg66l8Z6IEoZsM+2d3AXWblssijmDnQ1fNxXx8
 94gfcVqn5HhmmGQzf8ZUWZQvxqZN9merZQuTFj0mxZnzXBCnqjQ1pLxvgxlyqhLT
 IjSsIDhQTsOFTSxAR+1rK4Yo4o60U59/HrgcTdgP4mSaf0AWHFjhlVf+WfuJhVMY
 M5qtwTO1IuTpxlyzQgPaClF/CFOfC6OaKqvf6LRZPd0l4hMlOU8=
 =dH7Y
 -----END PGP SIGNATURE-----

Merge tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
  driver gets alarm support. We also get a fix for a race condition that
  was fairly rare unless while stress testing the alarms.

  Subsystem:
   - Fix race when setting alarm
   - Ensure alarm irq is enabled when UIE is enabled
   - remove unneeded 'fast_io' parameter in regmap_config

  New driver:
   - SpacemiT P1 RTC

  Drivers:
   - efi: Remove wakeup functionality
   - optee: add alarms support
   - s3c: Drop support for S3C2410
   - zynqmp: Restore alarm functionality after kexec transition"

* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
  rtc: interface: Ensure alarm irq is enabled when UIE is enabled
  rtc: tps6586x: Fix initial enable_irq/disable_irq balance
  rtc: cpcap: Fix initial enable_irq/disable_irq balance
  rtc: isl12022: Fix initial enable_irq/disable_irq balance
  rtc: interface: Fix long-standing race when setting alarm
  rtc: pcf2127: fix watchdog interrupt mask on pcf2131
  rtc: zynqmp: Restore alarm functionality after kexec transition
  rtc: amlogic-a4: Optimize global variables
  rtc: sd2405al: Add I2C address.
  rtc: Kconfig: move symbols to proper section
  rtc: optee: make optee_rtc_pm_ops static
  rtc: optee: Fix error code in optee_rtc_read_alarm()
  rtc: optee: fix error code in probe()
  dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
  rtc: spacemit: support the SpacemiT P1 RTC
  rtc: optee: add alarm related rtc ops to optee rtc driver
  rtc: optee: remove unnecessary memory operations
  rtc: optee: fix memory leak on driver removal
  rtc: x1205: Fix Xicor X1205 vendor prefix
  dt-bindings: rtc: Fix Xicor X1205 vendor prefix
  ...
2025-10-11 11:56:47 -07:00
Linus Torvalds
2a6edd867b SCSI misc on 20251011
Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
 before or during the merge window.  The most important one is the
 qla2xxx which reverts a conversion to fix flexible array member
 warnings, that went up in this merge window but which turned out on
 further testing to be causing data corruption.
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaOpnUhsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
 c2hpcC5jb20ACgkQ50LJTO6YrIUCFQEA1cADof79U9suDka2hAa2l7D4wJQ53qSj
 R7CwarAVX2wA/3RaEHySnSk+ivyHRl5AOYlPrYsnBo1o2KUq1M6kfviM
 =itgd
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
  before or during the merge window.

  The most important one is the qla2xxx which reverts a conversion to
  fix flexible array member warnings, that went up in this merge window
  but which turned out on further testing to be causing data corruption"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
  scsi: ufs: sysfs: Make HID attributes visible
  scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
  scsi: ufs: core: Fix PM QoS mutex initialization
  scsi: ufs: core: Fix runtime suspend error deadlock
  Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
  scsi: target: target_core_configfs: Add length check to avoid buffer overflow
2025-10-11 11:49:00 -07:00
Linus Torvalds
9591fdb061 - Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
 
 - Replace KVM fastops with C-based stubs which avoids problems with the
   fastop infra related to latter not adhering to the C ABI due to their
   special calling convention and, more importantly, bypassing compiler
   control-flow integrity checking because they're written in asm
 
 - Remove wrongly used static branches and other ugliness accumulated
   over time in hyperv's hypercall implementation with a proper static
   function call to the correct hypervisor call variant
 
 - Add some fixes and modifications to allow running FRED-enabled kernels
   in KVM even on non-FRED hardware
 
 - Add kCFI improvements like validating indirect calls and prepare for
   enabling kCFI with GCC. Add cmdline params documentation and other
   code cleanups
 
 - Use the single-byte 0xd6 insn as the official #UD single-byte
   undefined opcode instruction as agreed upon by both x86 vendors
 
 - Other smaller cleanups and touchups all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjqXxkACgkQEsHwGGHe
 VUq9QBAAsjaay99a1+Dc53xyP1/HzCUFZDOzEYhj9zF85I8/xA9vTXZr7Qg2m6os
 +4EEmnlwU43AR5KgwGJcuszLF9qSqTMz5qkAdFpvnoQ1Hbc8b49A+3yo9/hM7NA2
 gPGH0gVZVBcffoETiQ8tJN6C9H6Ec0nTZwKTbasWwxz5oUAw+ppjP+aF4rFQ2/5w
 b1ofrcga5yucjvSlXjBOEwHvd21l7O9iMre1oGEn6b0E2LU8ldToRkJkVZIhkWeL
 2Iq3gYtVNN4Ao06WbV/EfXAqg5HWXjcm5bLcUXDtSF+Blae+gWoCjrT7XQdQGyEq
 J12l4FbIZk5Ha8eWAC425ye9i3Wwo+oie3Cc4SVCMdv5A+AmOF0ijAlo1hcxq0rX
 eGNWm8BKJOJ9zz1kxLISO7CfjULKgpsXLabF5a19uwoCsQgj5YrhlJezaIKHXbnK
 OWwHWg9IuRkN2KLmJa7pXtHkuAHp4MtEV9TP9kU2WCvCInrNrzp3gYtds3pri82c
 8ove+WA3yb/AQ6RCq5vAMLYXBxMRbN7FrmY5ZuwgWJTMi6cp1Sp02mhobwJOgNhO
 H7nKWCZnQMyCLPzVeg97HTSgqSXw13dSrujWX9gWYVWBMfZO1B9HcUrhtiOhH7Q9
 cvELkcqaxKrCKdRHLLYgHeMIQU2tdpsQ5TXHm7C7liEcZPZpk+g=
 =3Otb
 -----END PGP SIGNATURE-----

Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull more x86 updates from Borislav Petkov:

 - Remove a bunch of asm implementing condition flags testing in KVM's
   emulator in favor of int3_emulate_jcc() which is written in C

 - Replace KVM fastops with C-based stubs which avoids problems with the
   fastop infra related to latter not adhering to the C ABI due to their
   special calling convention and, more importantly, bypassing compiler
   control-flow integrity checking because they're written in asm

 - Remove wrongly used static branches and other ugliness accumulated
   over time in hyperv's hypercall implementation with a proper static
   function call to the correct hypervisor call variant

 - Add some fixes and modifications to allow running FRED-enabled
   kernels in KVM even on non-FRED hardware

 - Add kCFI improvements like validating indirect calls and prepare for
   enabling kCFI with GCC. Add cmdline params documentation and other
   code cleanups

 - Use the single-byte 0xd6 insn as the official #UD single-byte
   undefined opcode instruction as agreed upon by both x86 vendors

 - Other smaller cleanups and touchups all over the place

* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86,retpoline: Optimize patch_retpoline()
  x86,ibt: Use UDB instead of 0xEA
  x86/cfi: Remove __noinitretpoline and __noretpoline
  x86/cfi: Add "debug" option to "cfi=" bootparam
  x86/cfi: Standardize on common "CFI:" prefix for CFI reports
  x86/cfi: Document the "cfi=" bootparam options
  x86/traps: Clarify KCFI instruction layout
  compiler_types.h: Move __nocfi out of compiler-specific header
  objtool: Validate kCFI calls
  x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
  x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
  x86/fred: Install system vector handlers even if FRED isn't fully enabled
  x86/hyperv: Use direct call to hypercall-page
  x86/hyperv: Clean up hv_do_hypercall()
  KVM: x86: Remove fastops
  KVM: x86: Convert em_salc() to C
  KVM: x86: Introduce EM_ASM_3WCL
  KVM: x86: Introduce EM_ASM_1SRC2
  KVM: x86: Introduce EM_ASM_2CL
  KVM: x86: Introduce EM_ASM_2W
  ...
2025-10-11 11:19:16 -07:00
Linus Torvalds
2f0a750453 - Simplify inline asm flag output operands now that the minimum compiler
version supports the =@ccCOND syntax
 
 - Remove a bunch of AS_* Kconfig symbols which detect assembler support for
   various instruction mnemonics now that the minimum assembler version
   supports them all
 
 - The usual cleanups all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjqQswACgkQEsHwGGHe
 VUoFQg/9EoQ8TnWyzdTQ83+4sy1ePIgY+WyRPlDPmyoAjGN1WTT1NUY2JBeaW5CA
 UVKJlaO2Nh/c5YypuJR2PtpPuJlNvRBLwpN3Lj+PiAhaYv8gcyeZg64c4MaRaTyc
 yuoj5CaEhyQ16CDBPAjxDQ6+68YHjltlDSZainj77YWSzcBSflJCYH1RnNlCHiM9
 ggBIoFmWltrCEDDW6d0Phl+Fh3K4tuYexRucIavgE+k4ZD+XqujWeLTaau837yW7
 CMvN16elGorWGRBGiaRGH2sbrh8ruYPw4lr5DlFl7ApoBmxgK9s9peicUHtHQz4H
 E9/c2XjGwVE4MtCI5IfeqG87DfojVeiWkXO30CMRalsFlbZzKs4JwalspIzgxH4s
 m2tsfN++y9eC1b4a8EaSVWBk03xmmNWM7FqjC3LOMyV0aI9dqj/u36aadHMC/GsL
 Rwl1GCnJnwu0Z7bho7L2qB0om4NOkX8H3uyzoOzDNC+RTKvgwumI0LpJBwrUrqW7
 Ftf7hIc52hj94drN2RsVtvu3ueBNJF8SW4VJ13UJyZyJDnB4Os2wrI9aJ1vBam1e
 md90pVVGjiXg/PhoCPDHPYzPs8oV2zNEJ0im/wNhkCH42yMAoIlbFDS77JghzSF2
 sI9vMJVsLN7y/SbiysejTBG83j1dEPIpkC7oSzkYOZNNjCKRWWo=
 =dW6J
 -----END PGP SIGNATURE-----

Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cleanups from Borislav Petkov:

 - Simplify inline asm flag output operands now that the minimum
   compiler version supports the =@ccCOND syntax

 - Remove a bunch of AS_* Kconfig symbols which detect assembler support
   for various instruction mnemonics now that the minimum assembler
   version supports them all

 - The usual cleanups all over the place

* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
  x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
  x86/mtrr: Remove license boilerplate text with bad FSF address
  x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
  x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
  x86/entry/fred: Push __KERNEL_CS directly
  x86/kconfig: Remove CONFIG_AS_AVX512
  crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
  crypto: X86 - Remove CONFIG_AS_VAES
  crypto: x86 - Remove CONFIG_AS_GFNI
  x86/kconfig: Drop unused and needless config X86_64_SMP
2025-10-11 10:51:14 -07:00
Linus Torvalds
6bb71f0fe5 slab hotfix for 6.18-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmjqGjcbFIAAAAAABAAO
 bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiaREIH/1qSp0ucBkrwjPKP0YZq
 7BIR4Lx/+o77emeV/vX2qhJnsXELEn7uRlb2vb8tbebobqgQc3SisQMqtJ4Uz2Er
 /ymYNRUKmkT4frQZwD81TjCP2rSoy1Zlyegs8Cy4UuAb4ixfWItqJA9BEBrDSkJ2
 kpLWcQX9SPMAszq8s0dXiAIvOuNoHIQyVExyOkzLiUkwtbUbsG1gl6sy80W9pZ8+
 VktCL+LMczcVYtdUt2e8DCZWFpihwwA8hFKLxv9icfOlkDrhHRrhK7rL+DnLVpgF
 Lt4XdQGouxo3MgwcCOxITlKx7BidJcfwVJ6tiElURm4L7Df+A+ESCzu7OVAyxvEU
 5AY=
 =7fxN
 -----END PGP SIGNATURE-----

Merge tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab

Pull slab fix from Vlastimil Babka:
 "A NULL pointer deref hotfix"

* tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  slab: fix barn NULL pointer dereference on memoryless nodes
2025-10-11 10:40:24 -07:00