Because thermal_zone_device_exec() has no users any more and there are
no plans to use it anywhere, revert commit 9a99a996d1 ("thermal: core:
Introduce thermal_zone_device_exec()") that introduced it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rearrange the code handling notifications from the platform firmware
regarding trip point updates to carry out one loop over trip points
instead of two of them by using thermal_zone_for_each_trip() for that,
which is more straightforward than using a combination of
thermal_zone_device_exec() and for_each_thermal_trip(), each with its
own callback function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Combine acpi_thermal_update_passive_trip() and
acpi_thermal_update_active_trip() into one common function called
acpi_thermal_update_trip(), so as to reduce code duplication and
prepare the code in question for subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Put the get_active_temp() function next to the analogous
get_passive_temp() one to allow subsequent changes to be easier to
follow.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add a wrapper around for_each_thermal_trip(), called
thermal_zone_for_each_trip(), that will invoke the former under the
thermal zone lock and pass its return value to the caller.
Two drivers will be modified subsequently to use this new function.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Fix up the following formatting issues:
* braces following function declarations should be on a new line
* empty line should be present between function declarations
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that the list of device ACPI handles in struct acpi_thermal is not
used and drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rename structure fields holding temperature values in deci-Kelvin so as
to avoid temperature units confusion.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The critical_valid and hot_valid flags in struct acpi_thermal_trips are
only used during initialization and they are only false if the
corresponding trip temperatures are equal to THERMAL_TEMP_INVALID, so
drop them and use THERMAL_TEMP_INVALID checks instead of them where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rearrange the ACPI thermal driver's callback functions used for cooling
device binding and unbinding, acpi_thermal_bind_cooling_device() and
acpi_thermal_unbind_cooling_device(), respectively, so that they use trip
pointers instead of trip indices which is more straightforward and allows
the driver to become independent of the ordering of trips in the thermal
zone structure.
The general functionality is not expected to be changed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Merge thermal core changes for v6.7 depended on by subsequent ACPI
thermal driver changes:
- Drop trips_disabled bitmask that is not really useful any more from
the thermal zone structure.
- Drop a reduntant NULL pointer check from for_each_thermal_trip().
- Redefine struct thermal_instance to hold a thernal trip pointer
instead of a trip index.
- Add helpers for binding and unbinding cooling devices to and from
trip points, reslectively, that take trip pointers as arguments.
* thermal-core:
thermal: core: Allow trip pointers to be used for cooling device binding
thermal: core: Store trip pointer in struct thermal_instance
thermal: trip: Drop redundant trips check from for_each_thermal_trip()
thermal: core: Drop trips_disabled bitmask
After removing the valid flag from struct acpi_thermal_trip, the trip
temperature value is used in validity checks, so it must be
THERMAL_TEMP_INVALID for the active trip entries in struct acpi_thermal_trips
that are not going to be used (because the corresponding objects are not
present in the ACPI tables, for example).
Accordingly, modify acpi_thermal_get_trip_points() to set the temperature
value to THERMAL_TEMP_INVALID for trip point entries skipped by it after
acpi_thermal_init_trip() has returned 'false' for an active trip.
Fixes: 058f5e407d ("ACPI: thermal: Drop valid flag from struct acpi_thermal_trip")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add new helper functions, thermal_bind_cdev_to_trip() and
thermal_unbind_cdev_from_trip(), to allow a trip pointer to be used for
binding a cooling device to a trip point and unbinding it, respectively,
and redefine the existing helpers, thermal_zone_bind_cooling_device()
and thermal_zone_unbind_cooling_device(), as wrappers around the new
ones, respectively.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Replace the integer trip number stored in struct thermal_instance with
a pointer to the relevant trip and adjust the code using the structure
in question accordingly.
The main reason for making this change is to allow the trip point to
cooling device binding code more straightforward, as illustrated by
subsequent modifications of the ACPI thermal driver, but it also helps
to clarify the overall design and allows the governor code overhead to
be reduced (through subsequent modifications).
The only case in which it adds complexity is trip_point_show() that
needs to walk the trips[] table to find the index of the given trip
point, but this is not a critical path and the interface that
trip_point_show() belongs to is problematic anyway (for instance, it
doesn't cover the case when the same cooling devices is associated
with multiple trip points).
This is a preliminary change and the affected code will be refined by
a series of subsequent modifications of thermal governors, the core and
the ACPI thermal driver.
The general functionality is not expected to be affected by this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In order to reduce code duplicationeve further, merge
acpi_thermal_init_passive/active_trip() into one function called
acpi_thermal_init_trip() that will be used for initializing both
the passive and active trip points.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In order to reduce code duplicationeve further, merge
acpi_thermal_update_passive/active_devices() into one function
called acpi_thermal_update_trip_devices() that will be used for
updating both the passive and active trip points.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In order to reduce code duplication, merge update_passive_devices() and
update_active_devices() into one function called update_trip_devices()
that will be used for updating both the passive and active trip points.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The device lists present in struct acpi_thermal_passive and struct
acpi_thermal_active can be located in struct acpi_thermal_trip which
then will allow the same code to be used for handling both the passive
and active trip points, so make that change.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Free "tz" if the "trip" allocation fails.
Fixes: 5fc2189f9335 ("ACPI: thermal: Create and populate trip points table earlier")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is invalid to call for_each_thermal_trip() on an unregistered thermal
zone anyway, and as per thermal_zone_device_register_with_trips(), the
trips[] table must be present if num_trips is greater than zero for the
given thermal zone.
Hence, the trips check in for_each_thermal_trip() is redundant and so it
can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that the valid flag in struct acpi_thermal_trip is in fact
redundant, because the temperature field of invalid trips is always
equal to THERMAL_TEMP_INVALID, so drop it from there and adjust the
code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Trip point flags previously used by the driver need not be used any more
after the preceding changes, so drop them and adjust the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Separate the code needed to update active trips (in a response to a
notification from the platform firmware) as well as to initialize them
from the code that is only necessary for their initialization and
cleanly divide it into functions that each carry out a specific action.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Separate the code needed to update the passive trip (in a response to a
notification from the platform firmware) as well as to initialize it
from the code that is only necessary for its initialization and cleanly
divide it into functions that each carry out a specific action.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that the only piece of information regarding the critical and hot
trips that needs to be stored in the driver's local data structures is
whether or not these trips are valid, so drop all of the redundant
information from there and adjust the code accordingly.
Among other things, this requires acpi_thermal_add() to be rearranged
so as to obtain the critical trip temperature before populating the trip
points table and for symmetry, the hot trip temperature is obtained
earlier too.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Create and populate the driver's trip points table in acpi_thermal_add()
so as to allow the its data structures to be simplified going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Compute the number of trip points in acpi_thermal_add() so as to allow the
driver's data structures to be simplified going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is only one caller of acpi_thermal_get_info() and the code from
it can be folded into its caller just fine, so do that.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use the observation that the critical and hot trip points are never
updated by the ACPI thermal driver, because the flags passed from
acpi_thermal_notify() to acpi_thermal_trips_update() do not include
ACPI_TRIPS_CRITICAL or ACPI_TRIPS_HOT, to move the initialization
of those trip points directly into acpi_thermal_get_trip_points() and
reduce the size of __acpi_thermal_trips_update().
Also make the critical and hot trip points initialization code more
straightforward and drop the flags that are not needed any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
After recent changes, thermal_zone_get_trip() cannot fail, as invoked
from thermal_zone_device_register_with_trips(), so the only role of
the trips_disabled bitmask is struct thermal_zone_device is to make
handle_thermal_trip() skip trip points whose temperature was initially
zero. However, since the unit of temperature in the thermal core is
millicelsius, zero may very well be a valid temperature value at least
in some usage scenarios and the trip temperature may as well change
later. Thus there is no reason to permanently disable trip points
with initial temperature equal to zero.
Accordingly, drop the trips_disabled bitmask along with the code
related to it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* Fix EL2 Stage-1 MMIO mappings where a random address was used
* Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
* Fix KVM_GET_REG_LIST API for ISA_EXT registers
* Fix reading ISA_EXT register of a missing extension
* Fix ISA_EXT register handling in get-reg-list test
* Fix filtering of AIA registers in get-reg-list test
x86:
* Fixes for TSC_AUX virtualization
* Stop zapping page tables asynchronously, since we don't
zap them as often as before
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUQU5YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcdwf/X8eHQ5yfAE0J70xs4VZ1z7B8i77q
P54401z/q0FyQ4yyTHwbUv/FgVYscZ0efYogrkd3uuoPNtLmN2xKj1tM95A2ncP/
v318ljevZ0FWZ6J471Xu9MM3u15QmjC3Wai9z6IP4tz0S2rUhOYTJdFqlNf6gQSu
P8n9l2j3ZLAiUNizXa8M7350gCUFCBi37dvLLVTYOxbu17hZtmNjhNpz5G7YNc9y
zmJIJh30ZnMGUgMylLfcW0ZoqQFNIkNg3yyr9YjY68bTW5aspXdhp9u0zI+01xYF
sT+tOXBPPLi9MBuckX+oLMsvNXEZWxos2oMow3qziMo83neG+jU+WhjLHg==
=+sqe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
- Fix the "bytes" output of the per_cpu stat file
The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
accounting was not accurate. It is suppose to show how many used bytes are
still in the ring buffer, but even when the ring buffer was empty it would
still show there were bytes used.
- Fix a bug in eventfs where reading a dynamic event directory (open) and then
creating a dynamic event that goes into that diretory screws up the accounting.
On close, the newly created event dentry will get a "dput" without ever having
a "dget" done for it. The fix is to allocate an array on dir open to save what
dentries were actually "dget" on, and what ones to "dput" on close.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZQ9wihQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quz4AP4vSFohvmAcTzC+sKP7gMLUvEmqL76+
1pixXrQOIP5BrQEApUW3VnjqYgjZJR2ne0N4MvvmYElm/ylBhDd4JRrD3g8=
=X9wd
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the "bytes" output of the per_cpu stat file
The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
accounting was not accurate. It is suppose to show how many used
bytes are still in the ring buffer, but even when the ring buffer was
empty it would still show there were bytes used.
- Fix a bug in eventfs where reading a dynamic event directory (open)
and then creating a dynamic event that goes into that diretory screws
up the accounting.
On close, the newly created event dentry will get a "dput" without
ever having a "dget" done for it. The fix is to allocate an array on
dir open to save what dentries were actually "dget" on, and what ones
to "dput" on close.
* tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Remember what dentries were created on dir open
ring-buffer: Fix bytes info in per_cpu buffer stats
- Fix multiple scenarios where platform firmware defined regions fail to
be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS native
AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security" commands
are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZQ9ZeAAKCRDfioYZHlFs
Z2b6AQDCNGMZdvJXwXW8LY/GHzJvuIWzvzSf0/Zy050Q1s4qrQEAqmmKCXtzjtMV
PQLm9o3a96Wb/zSzRZJwMVCTyXClVwg=
=sSix
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of regression fixes, bug fixes, and some small cleanups
to the Compute Express Link code.
The regressions arrived in the v6.5 dev cycle and missed the v6.6
merge window due to my personal absences this cycle. The most
important fixes are for scenarios where the CXL subsystem fails to
parse valid region configurations established by platform firmware.
This is important because agreement between OS and BIOS on the CXL
configuration is fundamental to implementing "OS native" error
handling, i.e. address translation and component failure
identification.
Other important fixes are a driver load error when the BIOS lets the
Linux PCI core handle AER events, but not CXL memory errors.
The other fixex might have end user impact, but for now are only known
to trigger in our test/emulation environment.
Summary:
- Fix multiple scenarios where platform firmware defined regions fail
to be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS
native AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security"
commands are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups"
* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
cxl/port: Fix cxl_test register enumeration regression
cxl/region: Refactor granularity select in cxl_port_setup_targets()
cxl/region: Match auto-discovered region decoders by HPA range
cxl/mbox: Fix CEL logic for poison and security commands
cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
PCI/AER: Export pcie_aer_is_native()
cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
- fix an invalid usage of __free(kfree) leading to kfreeing an ERR_PTR()
- fix an irq domain leak in gpio-tb10x
- MAINTAINERS update
-----BEGIN PGP SIGNATURE-----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=KqzF
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an invalid usage of __free(kfree) leading to kfreeing an
ERR_PTR()
- fix an irq domain leak in gpio-tb10x
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix an invalid __free() usage
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
MAINTAINERS: gpio-regmap: make myself a maintainer of it
cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA
jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP
X6uc2cYHc9DG5/o44iFgadW8byMssQs=
=w+St
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
-----BEGIN PGP SIGNATURE-----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=Q4Rt
-----END PGP SIGNATURE-----
Merge tag '6.6-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Six smb3 client fixes, including three for stable, from the SMB
plugfest (testing event) this week:
- Reparse point handling fix (found when investigating dir
enumeration when fifo in dir)
- Fix excessive thread creation for dir lease cleanup
- UAF fix in negotiate path
- remove duplicate error message mapping and fix confusing warning
message
- add dynamic trace point to improve debugging RDMA connection
attempts"
* tag '6.6-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix confusing debug message
smb: client: handle STATUS_IO_REPARSE_TAG_NOT_HANDLED
smb3: remove duplicate error mapping
cifs: Fix UAF in cifs_demultiplex_thread()
smb3: do not start laundromat thread when dir leases disabled
smb3: Add dynamic trace points for RDMA (smbdirect) reconnect
The code was accidentally mixing new and old style macros, update the
macros used to remove an unused function warning whilst building with
no PM enabled in the config.
Fixes: ace6d14481 ("mfd: cs42l43: Add support for cs42l43 core driver")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/all/20230822114914.340359-1-ckeepax@opensource.cirrus.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=EKBZ
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix lockdep, fix a boot failure, fix some build warnings, fix document
links, and some cleanups"
* tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Update the links of ABI
docs/LoongArch: Update the links of ABI
LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem()
kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage
LoongArch: Set all reserved memblocks on Node#0 at initialization
LoongArch: Remove dead code in relocate_new_kernel
LoongArch: Use _UL() and _ULL()
LoongArch: Fix some build warnings with W=1
LoongArch: Fix lockdep static memory detection
* Return EIO on bad inputs to iomap_to_bh instead of BUGging, to deal
less poorly with block device io racing with block device resizing.
* Fix a stale page data exposure bug introduced in 6.6-rc1 when
unsharing a file range that is not in the page cache.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZQsCFAAKCRBKO3ySh0YR
pkhZAP9VHpjBn95MEai0dxAVjAi8IDcfwdzBuifBWlkQwnt6MAEAiHfHEDfN23o9
4Xg9EDqa8IOSYwxphJYnYG73Luvi5QQ=
=Xtnv
-----END PGP SIGNATURE-----
Merge tag 'iomap-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
- Return EIO on bad inputs to iomap_to_bh instead of BUGging, to deal
less poorly with block device io racing with block device resizing
- Fix a stale page data exposure bug introduced in 6.6-rc1 when
unsharing a file range that is not in the page cache
* tag 'iomap-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: convert iomap_unshare_iter to use large folios
iomap: don't skip reading in !uptodate folios when unsharing a range
iomap: handle error conditions more gracefully in iomap_to_bh
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
-----BEGIN PGP SIGNATURE-----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=ytFs
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
When the TSC_AUX MSR is virtualized, the TSC_AUX value is swap type "B"
within the VMSA. This means that the guest value is loaded on VMRUN and
the host value is restored from the host save area on #VMEXIT.
Since the value is restored on #VMEXIT, the KVM user return MSR support
for TSC_AUX can be replaced by populating the host save area with the
current host value of TSC_AUX. And, since TSC_AUX is not changed by Linux
post-boot, the host save area can be set once in svm_hardware_enable().
This eliminates the two WRMSR instructions associated with the user return
MSR support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d381de38eb0ab6c9c93dda8503b72b72546053d7.1694811272.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org
Fixes: 296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop zapping invalidate TDP MMU roots via work queue now that KVM
preserves TDP MMU roots until they are explicitly invalidated. Zapping
roots asynchronously was effectively a workaround to avoid stalling a vCPU
for an extended during if a vCPU unloaded a root, which at the time
happened whenever the guest toggled CR0.WP (a frequent operation for some
guest kernels).
While a clever hack, zapping roots via an unbound worker had subtle,
unintended consequences on host scheduling, especially when zapping
multiple roots, e.g. as part of a memslot. Because the work of zapping a
root is no longer bound to the task that initiated the zap, things like
the CPU affinity and priority of the original task get lost. Losing the
affinity and priority can be especially problematic if unbound workqueues
aren't affined to a small number of CPUs, as zapping multiple roots can
cause KVM to heavily utilize the majority of CPUs in the system, *beyond*
the CPUs KVM is already using to run vCPUs.
When deleting a memslot via KVM_SET_USER_MEMORY_REGION, the async root
zap can result in KVM occupying all logical CPUs for ~8ms, and result in
high priority tasks not being scheduled in in a timely manner. In v5.15,
which doesn't preserve unloaded roots, the issues were even more noticeable
as KVM would zap roots more frequently and could occupy all CPUs for 50ms+.
Consuming all CPUs for an extended duration can lead to significant jitter
throughout the system, e.g. on ChromeOS with virtio-gpu, deleting memslots
is a semi-frequent operation as memslots are deleted and recreated with
different host virtual addresses to react to host GPU drivers allocating
and freeing GPU blobs. On ChromeOS, the jitter manifests as audio blips
during games due to the audio server's tasks not getting scheduled in
promptly, despite the tasks having a high realtime priority.
Deleting memslots isn't exactly a fast path and should be avoided when
possible, and ChromeOS is working towards utilizing MAP_FIXED to avoid the
memslot shenanigans, but KVM is squarely in the wrong. Not to mention
that removing the async zapping eliminates a non-trivial amount of
complexity.
Note, one of the subtle behaviors hidden behind the async zapping is that
KVM would zap invalidated roots only once (ignoring partial zaps from
things like mmu_notifier events). Preserve this behavior by adding a flag
to identify roots that are scheduled to be zapped versus roots that have
already been zapped but not yet freed.
Add a comment calling out why kvm_tdp_mmu_invalidate_all_roots() can
encounter invalid roots, as it's not at all obvious why zapping
invalidated roots shouldn't simply zap all invalid roots.
Reported-by: Pattara Teerapong <pteerapong@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Yiwei Zhang<zzyiwei@google.com>
Cc: Paul Hsia <paulhsia@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers except the MMU notifier want to process all address spaces.
Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe()
and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe().
Extracted out of a patch by Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
