Refactor dev_fill_forward_path() to take a struct net_device_path_ctx
pointer instead of a (dev, daddr) pair, so the caller can build and
populate the context up front and keep it after the forward path walk.
This allows additional fields (e.g. vlan and ether_type) to be carried
in the context and shared with ndo_fill_forward_path implementations,
instead of being reconstructed on the stack inside the core helper.
Update the mtk_ppe_offload, airoha_ppe and nf_flow_table_path callers to
allocate and fill the context before invoking dev_fill_forward_path().
The network topology resolution behaviour is unchanged.
This is a preliminary patch to enable HW flowtable offload for IPv4
over IPv6 tunnels.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Trigger a warning if nf_ct_set() overlaps an existing ct object leading
to refcount leak. Add this warning to skb_set_nfct() whose only user is
nf_ct_set() instead.
Update existing nf_ct_set() callers to use nf_reset_ct() first to clean
up stale pointer to conntrack object which migh trigger false positive
warnings.
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH instead of open-coded
trigger type combinations in irqchip callbacks.
No functional change intended.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260802-b4b4-irq-trigger-mask-gpio-v1-1-948973636c84@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmp2NLQACgkQqDIjiipP
6E98UAf/SqeabRuCefz1qn4zdjQHL4jiIEHrhRvXLSPb2ooVhzZYpOP5sUXFG1W5
XxncjSyo7ZJKhVXrCd7II7GW6+3TqujM+MWpcYBerGsrLH0YudcOkAl8gTkhSXfV
ZfuKbSYR+mrLyWbszIzbyknaGFFt4xdkusTldhWA80dHb1G5o055/unVtVEDDn65
ciLmZqHBW+r0ureVhu6FJ5FNozCKfX4hXZOsX95FvIJEBvlDORHZmCEsaxbD1bem
mMcs2tU74s2eJtRmKuq7A2ddw23dUTxTUciiCh6r5h/dI0MTxaEZUpF5TjXvfEQE
Ick0gsWEc77263AS/2WAoTodQfBP5A==
=8Vte
-----END PGP SIGNATURE-----
Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:
"- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
thermal/drivers/imx: Disable clock on runtime resume failure
thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp
thermal/drivers/airoha: Add support for AN7583 Thermal Sensor
dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC
thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function
thermal/drivers/airoha: Generalize probe function
...
`SpinLockIrq` and `SpinLock` use the exact same underlying C structure,
with the only real difference being that the former uses the
irq_disable() and irq_enable() variants for locking/unlocking. These
variants can introduce some minor overhead in contexts where we already
know that local processor interrupts are disabled, and as such we want a
way to be able to skip modifying processor interrupt state in said
contexts in order to avoid some overhead - just like the current C API
allows us to do.
In order to do this, we add some special functions for SpinLockIrq:
lock_with() and try_lock_with(), which allow acquiring the lock without
changing the interrupt state - as long as the caller can provide a
LocalInterruptDisabled reference to prove that local processor
interrupts have been disabled.
In some hacked-together benchmarks we ran, most of the time this did
actually seem to lead to a noticeable difference in overhead:
From an aarch64 VM running on a MacBook M4:
lock() when irq is disabled, 100 times cost Delta { nanos: 500 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 292 }
lock() when irq is enabled, 100 times cost Delta { nanos: 834 }
lock() when irq is disabled, 100 times cost Delta { nanos: 459 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 291 }
lock() when irq is enabled, 100 times cost Delta { nanos: 709 }
From an x86_64 VM (qemu/kvm) running on a i7-13700H
lock() when irq is disabled, 100 times cost Delta { nanos: 1002 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 729 }
lock() when irq is enabled, 100 times cost Delta { nanos: 1516 }
lock() when irq is disabled, 100 times cost Delta { nanos: 754 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 966 }
lock() when irq is enabled, 100 times cost Delta { nanos: 1227 }
(note that there were some runs on x86_64 where lock() on irq
disabled vs. lock_with() on irq disabled had equivalent benchmarks,
but it very much appeared to be a minority of test runs.)
While it's not clear how this affects real-world workloads yet, let's
add this for the time being so we can find out.
This makes it so that a `SpinLockIrq` will work like a `SpinLock` if
interrupts are disabled. So a function:
(&'a SpinLockIrq, &'a LocalInterruptDisabled) -> Guard<'a, .., SpinLockBackend>
makes sense. Note that due to `Guard` and `LocalInterruptDisabled`
having the same lifetime, interrupts cannot be enabled while the Guard
exists.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-19-boqun@kernel.org
A variant of `SpinLock` that ensures interrupts are disabled in the
critical section. `lock()` will ensure that either interrupts are
already disabled or disable them. `unlock()` will reverse the respective
operation.
[Boqun: Port to use spin_lock_irq_disable() and
spin_unlock_irq_enable()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-18-boqun@kernel.org
spin_lock_irq_disable() and spin_unlock_irq_enable() are inline
functions, to use them in Rust helpers are introduced. This is for
interrupt disabling lock abstraction in Rust.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-16-boqun@kernel.org
This introduces a module for dealing with interrupt-disabled contexts,
including the ability to enable and disable interrupts along with the
ability to annotate functions as expecting that IRQs are already
disabled on the local CPU.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-15-boqun@kernel.org
validate_and_copy_from_user() allocates a page to store data from
userspace via get_zeroed_page(), and then returns it as a buffer.
Neither the function itself nor its callers require struct page access.
This buffer can easily be allocated with kzalloc() as there is nothing
special about it that requires going through the page allocator.
kzalloc(), which internally reduces to kmalloc() with __GFP_ZERO,
provides a better API and kfree() does not need to know the size of the
freed object. Additionally it removes the casts of (void *) and
(unsigned long) which only obfuscate the code.
Replace get_zeroed_page() with kzalloc() and free_page() with kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com/
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler.
Fixes: 7828b7bbbf ("gpio: add sloppy logic analyzer using polling")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Cengiz Can <cengiz.can@canonical.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260730220258.358169-2-cengiz.can@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
These drivers are gated by X86 but they compile on non-x86 just fine.
Add COMPILE_TEST to the menu so that these drivers can use it if they
want.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260729211001.719606-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Merge updates related to the ACPI video bus driver for 7.3-rc1:
- Introduce helper function acpi_dev_is_video_device() and use it in
the core ACPI device enumeration code, in the ACPI video bus driver,
in the ACPI support code for I2C, in the PCI VGA driver, and in the
x86 platform thinkpad_acpi driver (Andy Shevchenko)
- Add a quirk to use the native backlight on Acer Nitro AN515-46 to the
ACPI video bus driver (Marcos Paulo Medeiros)
- Release PCI device reference after lookup in video_detect_portege_r100()
in the ACPI video bus driver (Yuho Choi)
* acpi-video:
ACPI: video: Release PCI device reference after lookup
ACPI: video: force native backlight on Acer Nitro AN515-46
platform/x86: thinkpad_acpi: Convert to use acpi_dev_is_video_device() helper
PCI/VGA: Convert to use acpi_dev_is_video_device() helper
i2c: acpi: Convert to use acpi_dev_is_video_device() helper
ACPI: video: Convert to use acpi_dev_is_video_device() helper
ACPI: scan: Convert to use acpi_dev_is_video_device() helper
ACPI: utils: Introduce acpi_dev_is_video_device() helper
Merge an ACPI device enumeration core code update, ACPI support updates
related to PCI, an ACPI Time and Alarm Device (TAD) driver update and
ACPI APEI updates for 7.3-rc1:
- Avoid registering platform devices with resource overlaps in the ACPI
core device enumeration code (Rafael Wysocki)
- Clear driver_data on all paths that free acpi_pci_root in
acpi_pci_root_add() (Chen Pei)
- Simplify acpi_get_pci_dev() with the help of a mutex guard, introduce
acpi_dev_get_pci_dev() for code that has a struct ACPI device for
which it wants to get the struct pci_dev pointer of the associated
PCI device, and use it in the ACPI video bus driver (Rafael Wysocki)
- Avoid printing confusing _OSC messages for non-PCIe host bridges
without _OSC which is a valid configuration (Kazuma Kondo)
- Add locking around evaluation of ACPI control methods in the ACPI TAD
driver to avoid race conditions (Rafael Wysocki)
- Handle repeated SEA error storms in APEI (Junhao He)
- Fix ERST timeout unit conversion in APEI (Nirmoy Das)
- Fix ARM section length accounting after header in the ACPI APEI GHES
driver (TanZheng)
- Mark ghes_in_nmi_spool_from_list() as maybe unused (Rui Qi)
* acpi-scan:
ACPI: scan: Avoid registering platform devices with resource overlaps
* acpi-pci:
ACPI: PCI: Avoid misleading _OSC messages for non-PCIe host bridges without _OSC
ACPI: video: Use acpi_dev_get_pci_dev() instead of acpi_get_pci_dev()
ACPI: video: Drop backlight parent device reference later
ACPI: PCI: Introduce acpi_dev_get_pci_dev()
ACPI: PCI: Use a mutex guard to simplify acpi_get_pci_dev()
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
* acpi-tad:
ACPI: TAD: Add locking around AML evaluations
* acpi-apei:
ACPI: APEI: Handle repeated SEA error storms
ACPI: APEI: Fix ERST timeout unit conversion
ACPI: APEI: GHES: fix ARM section length accounting after header
ACPI: APEI: GHES: Mark ghes_in_nmi_spool_from_list() as maybe unused
If acpi_dev_get_resources() returns overlapping I/O or memory resources,
the subsequent registration of a platform device will fail with -EBUSY
due to a resource conflict. This is reported to happen on Acer Aspire
ES1-572 [1].
Avoid that by adjusting resources returned by acpi_dev_get_resources()
to eliminate partial overlaps between them.
This has not been regarded as necessary before because putting
overlapping resources into the _CRS of one device is really pointless,
but now that the issue has been reported to actually happen in the
field, it needs to be done.
Fixes: ab06eb9204 ("ACPI: scan: Register platform devices for fixed event buttons")
Fixes: 48fe2cddc8 ("tpm_crb: Convert ACPI driver to a platform one")
Reported-by: Julien <julien82453@gmail.com>
Tested-by: Julien <julien82453@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-integrity/CAJOGg3z6LJPDsdPNBxajgy8_wQxfhYBRxe4EiurZf3kPU5A5Bw@mail.gmail.com/ [1]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Tweaked the new message ]
Link: https://patch.msgid.link/12955541.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suspend and resume hold channel 0's lock while saving and restoring
registers for all eight channels. Code paths using the other seven locks
can therefore run concurrently with PM.
Use one controller-wide lock shared by all channels.
Fixes: b490fa0bf8 ("gpio-ml-ioh: Fix suspend/resume issue")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260731033956.EE6F61F000E9@smtp.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260804095935.2132215-1-junjie.cao@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d6 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.
Fixes: 54be566317 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
When no stack pointer is supplied, show_stack() starts at thread.esp0.
This is the saved userspace register frame, not where a task was switched
out. For kernel threads it points to the zeroed frame created by
copy_thread(), so sched_show_task() prints no useful backtrace.
Use thread.ksp for non-current tasks. It is saved by switch_to() and is
already used by __get_wchan(). For current, start at the current stack
frame, as is already done when no task is supplied.
Tested on qemu-system-m68k -M virt using SysRq-t. All task dumps contained
resolved frames.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260723041055.47289-1-kmehltretter@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Remove the redundant amiga_reset() prototype and mark the first one as
__noreturn instead.
Tested-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260629120426.680032-4-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the real world, it seems unlikely to cause an
actual problem. It is a read not a write so it can't corrupt any
memory. However, it could potentially fall off the end of a page and
cause an accvio bug.
Fixes: f378b77227 ("drm/connector: hdmi: Add Infoframes generation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Expósito <jose.exposito89@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: John Harrison <John.Harrison@Igalia.com>
Link: https://patch.msgid.link/20260723220652.533345-1-John.Harrison@Igalia.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Any new DTS code should pass dt-check-style 'relaxed' mode without
warnings and should have addressed most of applicable 'strict' mode
ones.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260803091740.232536-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the git tree URL for DMA MAPPING HELPERS to point to the
maintainer's repository on kernel.org and remove the obsolete web
page reference to the old infradead.org tree.
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The RZ/G3E CRU programs the line stride via the AMnIS register, whose
IS field encodes the value in units of 128 bytes. If bytesperline is
not a multiple of 128, the division truncates and the hardware uses a
wrong stride, causing horizontal banding.
Commit ace92ccef0 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
replaced the open-coded aligned calculation with v4l2_fill_pixfmt(),
which sets no alignment, reintroducing the issue.
Round bytesperline up to RZG2L_CRU_STRIDE_ALIGN and recompute
sizeimage when info->has_stride is set. RZ/G2L has no AMnIS register
and keeps the values from v4l2_fill_pixfmt() unchanged.
Fixes: ace92ccef0 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode
remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an
endpoint parse or add fails partway through the loop, it jumps to
err_parse and returns without calling v4l2_async_nf_cleanup(), leaking
every v4l2_async_connection already added to the notifier's waiting
list.
The register-failure path just below already cleans up correctly, and
the caller only tears the notifier down (isys_notifier_cleanup()) once
isys_notifier_init() has returned success. Clean up the notifier on the
parse error path too.
Fixes: f50c4ca0a8 ("media: intel/ipu6: add the main input system driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.
As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
corruption and a use-after-free the next time the list is walked.
The remove path already does the right thing by calling
isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on
the probe error path so the notifier is unregistered and cleaned up
before the device is torn down.
Fixes: a516d36bdc ("media: staging/ipu7: add IPU7 input system device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Arm64 already uses 64-bit preempt count and the need reschedule bit is
maintained in a separate 32-bit word from the preempt count. Therefore
preempt count has enough bits to represent 16 levels of NMI nesting,
hence enable it for arm64. This saves a per-CPU variable and additional
instructions in the NMI path.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-12-boqun@kernel.org
With the changes that enable preempt count to track IRQ disabling
nesting, we don't have enough bits in 32-bit preempt count
implementation, as a result we move NMI nesting bits out of the 32-bit
preempt count. However on the architectures that can support 64-bit
preempt count implementation, we can keep the NMI nesting bits in the
32-bit preempt count and avoid maintaining NMI nesting bits outside of
the same cache line.
Therefore HAS_SEPARATE_PREEMPT_RESCHED_BITS is introduced to allow
architectures to select this. Note that under this Kconfig, preempt
count is maintained in a 64-bit word however preempt_count() still
remains as an int because all the effective bits still fit in
(previously we mask out NEED_RESCHED bit in preempt_count()). This
should make no functional changes for existing preempt_count() users.
Enable this for x86_64 along with the introduction of the Kconfig.
[boqun: Undo the __preempt_count_{add,sub}() optimization in 32-bit
preempt count since it may introduce {over,under}flow]
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-11-boqun@kernel.org
Currently preempt_count() is always a non-negative int on all archs
(PREEMPT_NEED_RESCHED archs will mask out the MSB when returning
preempt_count()), hence the checking in __cant_migrate() is in fact just
checking whether preempt_count() is 0 or not. In a future change, we are
going to use all the 32 bits of preempt_count(), which would make
negative int values possible from preempt_count(). Therefore convert the
"> 0" comparison into a zero check to prepare for the future change.
No functional changes are intended.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-10-boqun@kernel.org
The preempt_offset is always 0 in all the callsites of __cant_sleep(),
hence remove it. It also allows us to clear up the code a bit by
no longer using a "preempt_count() > .." comparison.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-9-boqun@kernel.org
The semantics of various IRQ disabling guards match what
*_irq_{disable,enable}() provide, i.e. the interrupt disabling is
properly nested, therefore it's OK to switch to use
*_irq_{disable,enable}() primitives.
[boqun: Adjust the user-side changes in do_sched_cfs_*_timer() provided
by Peter and Lyude]
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-8-boqun@kernel.org
While making changes to the refcounted interrupt patch series, at some
point on my local branch I broke something and ended up writing some kunit
tests for testing refcounted interrupts as a result. So, let's include
these tests now that we have refcounted interrupts.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-7-boqun@kernel.org
Currently the nested interrupt disabling and enabling is represented by
_irqsave() and _irqrestore() APIs, which are relatively unsafe, for
example:
<interrupts are enabled as beginning>
spin_lock_irqsave(l1, flag1);
spin_lock_irqsave(l2, flag2);
spin_unlock_irqrestore(l1, flags1);
<l2 is still held but interrupts are enabled>
// accesses to interrupt-disable protected data will cause races
This is even easier to trigger with guard facilities:
unsigned long flag2;
scoped_guard(spin_lock_irqsave, l1) {
spin_lock_irqsave(l2, flag2);
}
// l2 locked but interrupts are enabled.
spin_unlock_irqrestore(l2, flag2);
(Hand-to-hand locking critical sections are not uncommon for a
fine-grained lock design)
And because of this unsafety, Rust cannot easily wrap the
interrupt-disabling locks in a safe API, which complicates the design.
To resolve this, introduce a new set of interrupt disabling APIs:
* local_interrupt_disable();
* local_interrupt_enable();
They work like local_irq_save() and local_irq_restore() except that 1)
the outermost local_interrupt_disable() call saves the interrupt state
into a per-CPU variable, so that the outermost local_interrupt_enable()
can restore the state, and 2) a per-CPU counter is added to record the
nest level of these calls, so that interrupts are not accidentally
enabled inside the outermost critical section.
Also add the corresponding spin_lock primitives: spin_lock_irq_disable()
and spin_unlock_irq_enable(), as a result, code as follows:
spin_lock_irq_disable(l1);
spin_lock_irq_disable(l2);
spin_unlock_irq_enable(l1);
// Interrupts are still disabled.
spin_unlock_irq_enable(l2);
doesn't have the issue that interrupts are accidentally enabled.
This also makes the wrapper of interrupt-disabling locks on Rust easier
to design.
[boqun: Apply Peter's feedback and fix spell errors reported by Ingo]
[boqun: Address the duplicate spin_acquire() spotted by sashiko]
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804182657.87716-1-boqun@kernel.org
isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.
Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered.
Fixes: 4e5e7a7ddb ("media: platform: amd: isp4 subdev and firmware loading handling added")
Assisted-by: Claude:claude-opus-4-8 smatch
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Reviewed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence.
If one of them fails, it jumps to error_no_memory and returns -ENOMEM
without releasing the pools that were already allocated, leaking them.
Release the already-allocated pools before returning. isp4if_gpu_mem_free()
is a no-op on pools that were not allocated, so calling
isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that
succeeded.
isp4if_gpu_mem_free() previously logged an error for a NULL entry, which
is a normal case during partial-allocation cleanup, so make it silent.
Fixes: 4c5feef6a6 ("media: platform: amd: Add isp4 fw and hw interface")
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Reviewed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
If the algorithm name is found in the allowlist and the privilege check
doesn't pass, there's no need to consider remaining entries since the
list contains (and is intended to contain) at most one entry per name.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It isn't obvious what false/true mean at the definition sites, so let's
replace it with flags instead. Also flip the polarity to make the
default zero-initialized value be the secure (privileged-only) value.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
So far the only reported use cases for cbc(paes) have involved processes
running as root. Therefore, make af_alg_restrict=1 allow only
privileged use of this algorithm for now.
Fixes: 947d62c094 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RNGC clock is enabled manually before runtime PM is configured. If
devm_hwrng_register() fails, probe returns without disabling the clock.
The devm_pm_runtime_enable() cleanup only disables runtime PM and does not
call imx_rngc_suspend().
Disable the clock before returning from this failure path.
Fixes: 7a96a64e86 ("hwrng: imx-rngc - add runtime pm")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ADF_HEX value type is defined in the adf_cfg_val_type enum and
handled in adf_cfg_add_key_value_param(), but no caller in the tree
uses it.
Remove the unused ADF_HEX enum value and its dead handling code.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the for loop's control flow and return the results directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the redundant ret = -ENODEV initialization. Use a while loop and
reuse the local index variable i on the error path.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the interrupt acquisition from irq_of_parse_and_map() to
platform_get_irq(), which resolves the IRQ from the device's interrupts
property via of_irq_get(). Flip the error check from testing for zero to
testing for a negative errno, and drop the now-unused
caam_jr_irq_dispose_mapping() callback and its devm_add_action_or_reset()
cleanup, since platform_get_irq() manages the mapping internally.
Replace the open-coded platform_get_resource() plus devm_ioremap()
sequence with devm_platform_ioremap_resource(), which fetches the
resource, requests the region and maps it in one call.
Each fsl,sec-*-job-ring node has a distinct 0x10000 reg region and
interrupts property, so the region reservation added by
devm_ioremap_resource() is exclusive and does not introduce overlap
failures.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver uses devm_request_irq() for the IRQ, but cleans up the
tasklet and DMA rings inside the remove function. Since devres frees
the IRQ only after the remove function returns, a window exists where a
pending hardware interrupt can reschedule the tasklet after it has been
killed, leading to use-after-free of the descriptor rings.
Fix by switching to plain request_irq() and adding the corresponding
free_irq() calls in the remove function and the probe error path before
tasklet_kill(), ensuring the IRQ is fully torn down before the tasklet
is killed.
Rename goto error path to err_tasklet as that's more descriptive.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is already done on probe failure.
cesa_dev should be set to NULL as the driver checks that it is not and
errors saying that only one device is authorized.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the misspelling of 'validate' in crypto_ecdh_shared_secret() and
ecc_is_pubkey_valid_partial() documentation.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
