Add a driver for the Qualcomm MBG (Master Bandgap) thermal monitoring
device. It monitors PMIC die temperature in hardware and raises an
interrupt when a programmed threshold is crossed.
MBG hardware supports two upper-threshold levels. Currently, only the
level-1 threshold is supported by the driver.
Temperature is read from the associated ADC channel, and when a level-1
upper-threshold violation occurs, the hardware generates an interrupt
over SPMI. The driver notifies the thermal framework accordingly.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Co-developed-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
Signed-off-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-spmi-mbg-driver-v3-2-ef73064f2789@oss.qualcomm.com
Add bindings for the Qualcomm MBG (Master Bandgap) temperature alarm
peripheral found on the PM8775 PMIC. Unlike the existing SPMI temp alarm
peripheral, the MBG peripheral supports both hot and cold threshold
monitoring across two programmable levels (LVL1 and LVL2), with interrupt
status reported via a fault status register over SPMI.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Co-developed-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
Signed-off-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-spmi-mbg-driver-v3-1-ef73064f2789@oss.qualcomm.com
- Fix BPF verifier to preserve full pointer state for commuted
scalar += pointer arithmetic (Yiyang Chen, Eduard Zingerman)
- Fix a use-after-free of request sockets in the BPF TCP
iterator batching (Jose Fernandez)
- Fix a use-after-free of sk_redir in the BPF sockmap send
verdict path (Chengfeng Ye)
- Fix a netns reference imbalance in the BPF conntrack kfuncs
(Chengfeng Ye)
- Fix bpf_get_fsverity_digest() dynptr assumptions and silent
digest truncation (Eric Biggers)
- Fix bpf_tcp_{gen,check}_syncookie to check sk_state before
sk_protocol to make sure it is a full socket (Luxiao Xu)
- Fix rqspinlock to reset the tail when preserving the queue
on deadlock (Kumar Kartikeya Dwivedi)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCanXeCRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIMfLQD9EWzi5MVBTcvg0XsHY1GZZBZUpfwo
VCrfPm9vHAVuqQ0A/0D9vWVRf1UEk9ccn+ebVKPuTuydGnDRR0Qovuca4gQF
=jZY8
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix BPF verifier to preserve full pointer state for commuted
scalar += pointer arithmetic (Yiyang Chen, Eduard Zingerman)
- Fix a use-after-free of request sockets in the BPF TCP iterator
batching (Jose Fernandez)
- Fix a use-after-free of sk_redir in the BPF sockmap send verdict
path (Chengfeng Ye)
- Fix a netns reference imbalance in the BPF conntrack kfuncs
(Chengfeng Ye)
- Fix bpf_get_fsverity_digest() dynptr assumptions and silent
digest truncation (Eric Biggers)
- Fix bpf_tcp_{gen,check}_syncookie to check sk_state before
sk_protocol to make sure it is a full socket (Luxiao Xu)
- Fix rqspinlock to reset the tail when preserving the queue
on deadlock (Kumar Kartikeya Dwivedi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rqspinlock: Reset tail when preserving queue on deadlock
bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie
fsverity: Fix silent truncation in bpf_get_fsverity_digest()
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()
bpf: Fix netns reference imbalance in conntrack kfuncs
bpf, sockmap: Fix sk_redir use-after-free in send verdict
selftests/bpf: Cover commuted pointer state propagation
bpf: Propagate untrusted pointer state in commuted arithmetic
bpf: Preserve pointer state for commuted arithmetic
bpf: Simplify sanitize_err() signature
shost->eh_noresume is currently consulted twice in one error handling
iteration: once before scsi_autopm_get_host() and once again before
scsi_autopm_put_host().
That is racy when a PM-triggered error path flips shost->eh_noresume
while the SCSI EH thread is still running.
The problem flow looks like this:
PM path
ufshcd_set_dev_pwr_mode()
shost->eh_noresume = 1
ufshcd_execute_start_stop <-- trigger EH
...
shost->eh_noresume = 0
EH path
scsi_error_handler()
if (!shost->eh_noresume)
scsi_autopm_get_host() <-- skipped
...
if (!shost->eh_noresume)
scsi_autopm_put_host() <-- executed later
In that case one EH iteration can skip autoresume on entry and still
drop a runtime PM reference on exit. That leaves an unmatched runtime PM
put and can trigger a runtime PM usage count underflow.
Fix this by making eh_noresume a regular bool so it can be accessed with
READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use
that snapshot for both runtime PM get and put decisions.
Fixes: ae0751ffc7 ("[SCSI] add flag to skip the runtime PM calls on the host")
Signed-off-by: Hongjie Fang <hongjiefang@asrmicro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260729111614.2407559-1-hongjiefang@asrmicro.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
After commit 7d703df7f4 ("ACPI: bus: Split _OSC evaluation out of
acpi_run_osc()"), the _OSC evaluation path now returns AE_ERROR to
negotiate_os_control() instead of propagating AE_NOT_FOUND from
acpi_evaluate_object().
This has not caused any functional issues so far, but it produces
additional misleading messages for non-PCIe host bridges without _OSC on
some Intel servers:
kernel: ACPI: Enabled 2 GPEs in block 00 to 7F
kernel: ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus fe])
kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
+ kernel: acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
+ kernel: acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
+ kernel: acpi PNP0A03:00: _OSC: platform retains control of PCIe features (AE_ERROR)
kernel: PCI host bridge to bus 0000:fe
Previously, negotiate_os_control() silently ignored AE_NOT_FOUND for
non-PCIe host bridges without _OSC, but after the above change, it no
longer does so.
As a result, negotiate_os_control() logs messages as if the OS had
negotiated with the platform via _OSC, even though the non-PCIe host
bridge has no _OSC method and no such negotiation actually occurs.
Skip _OSC negotiation for non-PCIe host bridges that do not define an
_OSC method before attempting to evaluate it.
Fixes: 7d703df7f4 ("ACPI: bus: Split _OSC evaluation out of acpi_run_osc()")
Link: https://lore.kernel.org/linux-acpi/d0be949d-0e21-472e-a44b-cedb1dd8695d@nec.com/
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kazuma Kondo <kazuma-kondo@nec.com>
[ rjw: Adjust white space, drop comment and tweak the new message ]
Link: https://patch.msgid.link/20260806112052.857684-1-kazuma-kondo@nec.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
KVM memslots describe half-open ranges [base_gfn, base_gfn + npages). A
slot ending exactly at the guest physical-address limit has its final page
below that limit and is valid.
The current greater-than-or-equal comparison rejects a valid boundary case.
Use a strict greater-than comparison, matching equivalent KVM architecture
checks.
Fixes: 9d05c1fee8 ("RISC-V: KVM: Implement stage2 page table programming")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260718033646.002.31dc89f2-caplitmus-rv@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address, since
regcache_lookup_reg() locates entries in it with bsearch(). When a table is
not sorted, bsearch() cannot find the entries which follow a descending step,
so regcache_reg_needs_sync() falls back to reporting that a sync is needed for
them. Those registers are then written to the device on every regcache_sync()
even when they were never touched.
See commit fd80df352b ("regcache: Add support for sorting defaults arrays")
for the same problem in a different context.
Affected tables:
ml26124_reg 1 of 79 entries unreachable
cx2072x_reg_defaults 75 of 132 entries unreachable
max9860_reg_defaults 1 of 14 entries unreachable
stih407_sas_reg_defaults 1 of 2 entries unreachable
Link: https://patch.msgid.link/20260805122811.13713-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
STIH407_AUDIO_DAC_CTRL (0xa8) is listed before
STIH407_AUDIO_GLUE_CTRL (0xa4), which makes the latter unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 165a57a3df ("ASoC: sti-sas: clean legacy in sti-sas")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
MAX9860_PWRMAN (0x10) is listed as the first entry, before
MAX9860_INTEN (0x02), which makes MAX9860_INTEN unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 3b2af7f799 ("ASoC: max9860: new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
The table is grouped by function rather than by address: for every node
the amplifier gain registers (0x41c0, 0x45c0, ...) are listed before the
power state and stream format registers of the same node (0x4014,
0x4414, ...). This leaves 75 of the 132 entries unreachable.
regcache_reg_needs_sync() then cannot compare them against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
The Mic Select Control register (0xe8) is listed in the analog path
control group, between 0x5a and 0x60, which makes it unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Move the entry to the end of the table, where it belongs by address.
Fixes: d808fe9f3e ("ASoC: Add LAPIS Semiconductor ML26124 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address, since
regcache_lookup_reg() locates entries in it with bsearch(). When a table is
not sorted, bsearch() cannot find the entries which follow a descending step,
so regcache_reg_needs_sync() falls back to reporting that a sync is needed for
them. Those registers are then written to the device on every regcache_sync()
even when they were never touched.
See commit fd80df352b ("regcache: Add support for sorting defaults arrays")
for the same problem in a different context.
The series is based on broonie/for-linus (05eebef3c7).
Affected tables:
tegra210_i2s_reg_defaults 2 of 8 entries unreachable
tegra264_i2s_reg_defaults 4 of 9 entries unreachable
tegra210_mixer_reg_defaults 1 entry unreachable
Link: https://patch.msgid.link/20260805122748.13090-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TEGRA210_MIXER_ENABLE (0x400) is the last entry of the table, after
TEGRA210_MIXER_PEAKM_RAM_CTRL (0x434), which makes it unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 05bb3d5ec6 ("ASoC: tegra: Add Tegra210 based Mixer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122748.13090-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TEGRA264_I2S_ENABLE (0x100), TEGRA264_I2S_RX_FIFO_WR_ACCESS_MODE (0x30)
and TEGRA264_I2S_TX_FIFO_RD_ACCESS_MODE (0xb0) are listed at the end of
the table, after TEGRA264_I2S_TIMING (0x130), which leaves 4 of the 9
entries unreachable. regcache_reg_needs_sync() then cannot compare them
against their default and reports that a sync is needed, so they are
written to the device on every regcache_sync() even when they were never
touched.
Sort the table by register address.
Fixes: b3354438d8 ("ASoC: tegra: I2S: Add Tegra264 support")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122748.13090-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TEGRA210_I2S_ENABLE (0x80) is listed after TEGRA210_I2S_CG (0x88) and
TEGRA210_I2S_TIMING (0xa4), so both it and TEGRA210_I2S_TIMING are
unreachable. regcache_reg_needs_sync() then cannot compare them against
their default and reports that a sync is needed, so they are written to
the device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: c0bfa98349 ("ASoC: tegra: Add Tegra210 based I2S driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122748.13090-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address, since
regcache_lookup_reg() locates entries in it with bsearch(). When a table is
not sorted, bsearch() cannot find the entries which follow a descending step,
so regcache_reg_needs_sync() falls back to reporting that a sync is needed for
them. Those registers are then written to the device on every regcache_sync()
even when they were never touched.
See commit fd80df352b ("regcache: Add support for sorting defaults arrays")
for the same problem in a different context.
The series is based on broonie/for-linus (05eebef3c7).
Affected tables:
sgtl5000_reg_defaults 1 of 35 entries unreachable
fsl_easrc_reg_defaults 3 of 120 entries unreachable
Link: https://patch.msgid.link/20260805122728.12362-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
The four REG_EASRC_RRL() entries are listed as a block before the four
REG_EASRC_RRH() ones, but the two registers of a context alternate in
the address map (RRL(n) at 0x110 + 8 * n, RRH(n) at 0x114 + 8 * n).
This leaves REG_EASRC_RRL(1), REG_EASRC_RRL(2) and REG_EASRC_RRL(3)
unreachable. regcache_reg_needs_sync() then cannot compare them against
their default and reports that a sync is needed, so they are written to
the device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122728.12362-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
SGTL5000_CHIP_SHORT_CTRL (0x003c) is listed before
SGTL5000_CHIP_ANA_TEST2 (0x003a), which makes the former unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 29aa37cddf ("ASoC: sgtl5000: Fix the cache handling")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122728.12362-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
The reg_defaults array of a regmap_config must be sorted by ascending
register address: regcache_lookup_reg() finds entries in it with
bsearch(), and regcache_init() only kmemdup_array()s the array, it never
sorts it. See commit fd80df352b ("regcache: Add support for sorting
defaults arrays").
When the array is not sorted, bsearch() descends into the wrong half and
a number of entries can never be found. regcache_reg_needs_sync() then
cannot compare the cached value against the default and always reports
that a sync is needed, so those registers are written to the device on
every regcache_sync() even if they were never touched.
I found this while chasing a SoundWire NAK on an unimplemented register
and audited the reg_defaults tables in sound/ by replaying lib/bsearch.c
over each of them. These are the affected TI/Burr-Brown codecs:
pcm512x_reg_defaults 45 entries, 24 unreachable
tas675x_reg_defaults 69 entries, 14 unreachable
tas2552_reg_defs 21 entries, 7 unreachable
tas2764_reg_defaults 11 entries, 1 unreachable
tas2780_reg_defaults 10 entries, 1 unreachable
The patches only reorder the existing entries. The text of every entry
is kept verbatim, no default value is changed, and each resulting table
was verified to be fully reachable.
tas2783-sdw was fixed separately, it had already been posted.
Link: https://patch.msgid.link/20260805104149.9795-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TAS675X_AC_LDG_CTRL_REG (0xb5), TAS675X_TWEETER_DETECT_CTRL_REG (0xb6),
TAS675X_TWEETER_DETECT_THRESH_REG (0xb7) and TAS675X_AC_LDG_FREQ_CTRL_REG
(0xb8) are listed before the 0x7c - 0xa0 block, which leaves 14 of the
69 entries unreachable. regcache_reg_needs_sync() then cannot compare
them against their default and reports that a sync is needed, so they
are written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805104149.9795-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TAS2780_DVC (0x1a) is listed before TAS2780_CHNL_0 (0x03), which makes
it unreachable. regcache_reg_needs_sync() then cannot compare it
against its default and reports that a sync is needed, so it is written
to the device on every regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: eae9f9ce18 ("ASoC: add tas2780 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805104149.9795-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TAS2764_DVC (0x1a) is listed before TAS2764_CHNL_0 (0x03), which makes
it unreachable. regcache_reg_needs_sync() then cannot compare it
against its default and reports that a sync is needed, so it is written
to the device on every regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805104149.9795-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TAS2552_OUTPUT_DATA (0x07), TAS2552_PDM_CFG (0x11), TAS2552_PGA_GAIN
(0x12) and TAS2552_BOOST_APT_CTRL (0x14) are listed before
TAS2552_RESERVED_0D (0x0d), TAS2552_LIMIT_RATE_HYS (0x0e) and
TAS2552_CFG_2 (0x02), which leaves 7 of the 21 entries unreachable.
regcache_reg_needs_sync() then cannot compare them against their
default and reports that a sync is needed, so they are written to the
device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 5df7f71d5c ("ASoC: tas2552: Support TI TAS2552 Amplifier")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805104149.9795-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
PCM512x_AUTO_MUTE (page 0, register 59) is listed before
PCM512x_ERROR_DETECT (page 0, register 37) and PCM512x_VCOM_CTRL_2
(page 1, register 9) is listed before the page 0 clocking block, so the
bsearch() descends into the wrong half of the table. 24 of the 45
entries are unreachable, among them every PLL coefficient and clock
divider default. regcache_reg_needs_sync() then cannot compare them
against their default and reports that a sync is needed, so they are
written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: 5a3af12931 ("ASoC: pcm512x: Add PCM512x driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805104149.9795-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
tas2783_reg_default[] is grouped by SDCA entity name instead, so the
binary search does not find 120 of its 196 entries.
regcache_reg_needs_sync() then cannot compare those against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 4cc9bd8d7b ("ASoc: tas2783A: Add soundwire based codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805091327.23944-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2783_AMP_LEVEL is defined as TASDEV_REG_SDW(0x0, 0x00, 0x03), so
tas2783_reg_default[] lists that register twice. Drop the open coded
second entry.
Fixes: 4cc9bd8d7b ("ASoc: tas2783A: Add soundwire based codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805091327.23944-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
PM4125_SWR_HPHPA_HD2 (0x3090) is listed before
PM4125_ANA_HPHPA_SPARE_CTL (0x308e), which makes the latter unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 8ad5294849 ("ASoC: codecs: add new pm4125 audio codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805113911.21723-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address as
regcache_lookup_reg() locates the entries in it with bsearch(), see commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
These tables have entries which are out of order, so the binary search does
not find part of them. For those registers regcache_reg_needs_sync()
cannot compare the cached value against the default and reports that a sync
is needed, so they are written to the device on every regcache_sync() even
when they were never touched.
On a RT712-VA this is not silent: the MIC_ARRAY function does not exist on
that part, so the extra writes are NAKed by the codec and the bus driver
reports
soundwire_intel.link.0: Msg ignored for Slave 6 (for addr: 0x8e00)
for every resume. For the other tables the extra writes are accepted and
only cost bus bandwidth on every runtime resume.
The sorting patches only reorder the existing entries, the text of every
entry is kept verbatim and no default value is changed. Each table was
verified by evaluating the register addresses and replaying lib/bsearch.c
on them.
Entries not reachable by the binary search, per table:
rt274_reg 7 (of 33)
rt286_reg 7 (of 39)
rt298_reg 7 (of 39)
rt700_reg_defaults 6 (of 320)
rt711_reg_defaults 5 (of 269)
rt711_sdca_reg_defaults 1 (of 54)
rt711_sdca_mbq_defaults 2 (of 25)
rt712_sdca_dmic_reg_defaults 3 (of 42)
rt712_sdca_reg_defaults 4 (of 19)
rt715_reg_defaults 25 (of 323)
rt715_reg_defaults_sdca 7 (of 78)
rt715_mbq_reg_defaults_sdca 1 (of 32)
rt721_sdca_reg_defaults 12 (of 41)
rt1017_sdca_reg_defaults 4 (of 110)
rt1316_reg_defaults 1 (of 47)
rt1318_reg 2 (of 142)
rt1318_reg_defaults 3 (of 81)
rt700 and rt715-sdca also have entries listed twice, those are dropped in
separate patches first so that the sorting patches are pure reorders.
Found by an audit of all reg_defaults tables under sound/. Other codec
drivers have unsorted reg_defaults too, those are not addressed here.
Link: https://patch.msgid.link/20260805090240.16991-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
rt1318_reg_defaults[] is not in address order, so the binary search does
not find 3 of its entries. regcache_reg_needs_sync() then cannot compare
those against their default and reports that a sync is needed, so they
are written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: 6ad73a2b42 ("ASoC: rt1318: Add RT1318 SDCA vendor-specific driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
The 0xdd93 and 0xdd94 entries are listed after 0xddc8 in rt1318_reg[],
which leaves them unreachable for the binary search.
regcache_reg_needs_sync() then cannot compare them against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: fe1ff61487 ("ASoC: rt1318: Add RT1318 audio amplifier driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
rt1316_reg_defaults[] is not in address order, so the binary search does
not find one of its entries. regcache_reg_needs_sync() then cannot
compare it against its default and reports that a sync is needed, so it
is written to the device on every regcache_sync() even when it was never
touched.
Sort the table by register address.
Fixes: 2b719fd20f ("ASoC: rt1316: Add RT1316 SDCA vendor-specific driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
rt1017_sdca_reg_defaults[] places the SDCA controls before the lower
vendor registers instead, so the binary search does not find 4 of its
entries. regcache_reg_needs_sync() then cannot compare those against
their default and reports that a sync is needed, so they are written to
the device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 2b7aecd585 ("ASoC: rt1017: Add RT1017 SDCA amplifier driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
rt721_sdca_reg_defaults[] is grouped by SDCA function instead, so the
binary search does not find 12 of its entries. regcache_reg_needs_sync()
then cannot compare those against their default and reports that a sync
is needed, so they are written to the device on every regcache_sync()
even when they were never touched.
Sort the table by register address.
Fixes: 86ce355c1f ("ASoC: rt721-sdca: Add RT721 SDCA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
Both tables group the entries by SDCA entity instead: in
rt715_reg_defaults_sdca[] the CX_CLK_SEL control is listed before the
ADC8_9, ADC10_11 and ADC7_27 mute controls (7 of 78 entries unreachable),
and in rt715_mbq_reg_defaults_sdca[] the AMIC_GAIN_EN CH_08 entry is listed
before the DMIC_GAIN_EN entries (1 of 32 entries unreachable).
regcache_reg_needs_sync() then cannot compare those against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort both tables by register address.
Fixes: 20d17057f0 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last two entries of rt715_reg_defaults_sdca[] repeat the ADC7_27 volume
mute controls for CH_01 and CH_02, which are already listed a few lines
above with the same value.
Drop the duplicates. No functional change, regcache_lookup_reg() only ever
finds one of the two copies.
Fixes: 20d17057f0 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
At the end of rt715_reg_defaults[] the 0x82xx and 0x83xx entries are
interleaved with the 0x72xx and 0x73xx entries they belong to, and 0x385e
is listed before 0x3859. This leaves 25 of the 323 entries unreachable for
the binary search. regcache_reg_needs_sync() then cannot compare them
against their default and reports that a sync is needed, so they are
written to the device on every regcache_sync() even when they were never
touched.
Sort the table by register address.
Fixes: d1ede0641b ("ASoC: rt715: add RT715 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
rt712_sdca_reg_defaults[] is grouped by SDCA function instead, so the
binary search does not find 4 of its entries. regcache_reg_needs_sync()
then cannot compare those against their default and reports that a sync
is needed, so they are written to the device on every regcache_sync()
even when they were never touched.
One of them is the Mic Array Clock Source 0x1C Sample Frequency Index
control, which a part without that function rejects:
soundwire_intel.link.0: Msg ignored for Slave 6, addr: 0x8e00
Sort the table by register address.
Fixes: 936abb09c1 ("ASoC: rt712-sdca: add the function for version B")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
rt712_sdca_dmic_reg_defaults[] is grouped by SDCA entity instead, so the
binary search does not find 3 of its entries. regcache_reg_needs_sync()
then cannot compare those against their default and reports that a sync
is needed, so they are written to the device on every regcache_sync()
even when they were never touched.
Sort the table by register address.
Fixes: 63a511284c ("ASoC: rt712-sdca: Add RT712 SDCA driver for Mic topology")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
Both tables group the entries by SDCA entity instead: in
rt711_sdca_reg_defaults[] the CS01 sample frequency index is listed before
the FU05 controls (1 of 54 entries unreachable), and in
rt711_sdca_mbq_defaults[] the MIC_ARRAY FU1E volumes are listed before the
JACK_CODEC FU0F volumes (2 of 25 entries unreachable).
regcache_reg_needs_sync() then cannot compare those against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort both tables by register address.
Fixes: 7ad4d237e7 ("ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
At the end of rt711_reg_defaults[] the 0x83xx entries are interleaved with
the 0x73xx entries they belong to, which leaves 5 of the 269 entries
unreachable for the binary search. regcache_reg_needs_sync() then cannot
compare them against their default and reports that a sync is needed, so
they are written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: 320b8b0d13 ("ASoC: rt711: add rt711 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
At the end of rt700_reg_defaults[] the 0x83xx entries are interleaved with
the 0x73xx entries they belong to, which leaves 6 of the entries
unreachable for the binary search. regcache_reg_needs_sync() then cannot
compare them against their default and reports that a sync is needed, so
they are written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: 7d2a5f9ae4 ("ASoC: rt700: add rt700 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt700_reg_defaults[] lists register 0x7303 twice with the same value. The
identical rt711 table has the entry only once, so this is a copy-paste
error.
Drop the duplicate. No functional change, regcache_lookup_reg() only ever
finds one of the two entries.
Fixes: 7d2a5f9ae4 ("ASoC: rt700: add rt700 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
Four entries were appended to the end of rt298_reg[] instead of being
inserted at their sorted position and the 0x01470100 entry is listed after
0x01470c00, which leaves 7 of the 39 entries unreachable for the binary
search. regcache_reg_needs_sync() then cannot compare them against their
default and reports that a sync is needed, so they are written to the
device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 6adcafae6e ("ASoC: add rt298 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
Four entries were appended to the end of rt286_reg[] instead of being
inserted at their sorted position and the 0x01470100 entry is listed after
0x01470c00, which leaves 7 of the 39 entries unreachable for the binary
search. regcache_reg_needs_sync() then cannot compare them against their
default and reports that a sync is needed, so they are written to the
device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 07cf7cbadb ("ASoC: add RT286 CODEC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
Four entries were appended to the end of rt274_reg[] instead of being
inserted at their sorted position, which leaves 7 of the 33 entries
unreachable for the binary search. regcache_reg_needs_sync() then cannot
compare them against their default and reports that a sync is needed, so
they are written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: c7e79b2b2d ("ASoC: rt274: add rt274 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805090240.16991-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver does not support modem status notifications and instead used
to fetch the modem status once at open() and subsequently operate on and
report stale state.
As part of fixing this, a call to fetch the status was added to
carrier_raised(), which does not work as that callback must not sleep
(e.g. unlike tiocmget()).
Drop the broken carrier detect support.
Fixes: e1ed212d85 ("USB: spcp8x5: add proper modem-status support")
Cc: stable@vger.kernel.org # 3.10
Reported-by: syzbot+3b514b87202742f22c44@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/6a73cea2.01d0871a.3a0d52.000d.GAE@google.com
Signed-off-by: Johan Hovold <johan@kernel.org>
- fix a lot of small bugs and races
x86:
- fix missing locking related to KVM_CAP_MOVE_ENC_CONTEXT_FROM
- warn on creating a new page table that is the child of an invalid one,
and limit damage before it's too late
- disable use of INVLPGA when NPT is enabled, because it doesn't seem
to flush TLBs correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmp14g0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPzrAf+KGSkR+qBbqgsSy0I86kw6VvX6h8i
TySes/l0JaNbVQDDt3vYzw/ZXhrm6dRA58i1mwjIVLIY3pflXzUrwqqXjLwvcGNf
1eX0jOZOg68fXPW22okR+7mNJdHSiRiX3Ozw20TrS5+33xN3dKa1xsTtNFRN99f6
h8mtQIP5L9dYn6y9lI27y51lkx3Ojd8SWAUJyXn8d3OA28mBcIShpq6BJsroHT34
HzibCnNAodFMGDsUJr93mpJisUV4EsWPKO2hzMm5FUUkV/JBD3GnqwF550Kwpc8a
ojuaHCEAnZXLoDuOTBiT8iQBa1fDUHizERlTkHD91s0ktwqf+e3p0azjMw==
=734T
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull vkm fixes from Paolo Bonzini:
"s390:
- fix a lot of small bugs and races
x86:
- fix missing locking related to KVM_CAP_MOVE_ENC_CONTEXT_FROM
- warn on creating a new page table that is the child of an invalid
one, and limit damage before it's too late
- disable use of INVLPGA when NPT is enabled, because it doesn't seem
to flush TLBs correctly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page
KVM: SVM: Serialize accesses to the owner and mirror list with separate lock
KVM: SVM: make svm_flush_tlb_gva do a full asid flush if NPT enabled
KVM: s390: Fix cleanup in kvm_s390_pv_create_cpu()
KVM: s390: Fix ordering when adding to SCA
KVM: s390: Return -EINTR if a signal is pending while faulting-in
KVM: s390: Free the mmu cache when kvm_arch_vcpu_create() fails
KVM: s390: ucontrol: Add missing locking around gmap_remove_child()
KVM: s390: cmma: Fix dirty tracking when removing memslot
KVM: s390: Fix race in __do_essa()
KVM: s390: Fix leaking of PGM_ADDRESSING to userspace
KVM: s390: ucontrol: Fix sca_clear_ext_call()
KVM: s390: Fix overclearing ESCA in case of error
KVM: s390: Fix kvm_s390_vcpu_unsetup_cmma()
KVM: s390: Do not free SCA if it was not allocated
KVM: s390: Fix unlikely NULL gmap dereference
s390/vfio_ccw: Implement a crw lock
s390/vfio_ccw: Selectively expand io_mutex
s390/vfio_ccw: Move cp cleanup out of not operational
s390/vfio_ccw: Cancel existing workqueues
...
The A733 NMI controller is compatible with the A523 one. Add an
A733-specific compatible string, with the A523 as fallback.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731-allwinner-a733-nmi-support-v1-1-61e4a0825b20@baylibre.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Correct a few white-space issues, like double space after '=' or before
bracket '{' characters, which will be flagged by dt-check-style. No
functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # qcom,ath10k.yaml
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for Documentation/devicetree/bindings/pwm
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260801195613.235430-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
