When reconstructing the removed interleave bit from an inflated memory
slice address, where a zero was inserted at the interleave bit position,
it's unnecessary to XOR this zero-valued interleave bit.
Remove this unnecessary XOR operation. No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-7-qiuxu.zhuo@intel.com
Raptor Lake-P was treated as using a different IBECC (In-Band ECC) error
address format and therefore had a dedicated extraction path that shifted
the logged address.
However, Raptor Lake-P uses the same cache-line-granularity error address
format as other IBECC platforms. The special handling causes the logged
address to be decoded incorrectly.
Fix the issue by removing Raptor Lake-P specific extraction logic and using
the common path instead. This also allows reusing Alder Lake resource
configuration data.
Fixes: d23627a768 ("EDAC/igen6: Add Intel Raptor Lake-P SoCs support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-6-qiuxu.zhuo@intel.com
In non-hash mode, decode_channel_addr() and channel index extraction
used a hardcoded interleave bit position 6 instead of the actual
intlv_bit parameter, causing incorrect channel address decoding.
Fix this by using intlv_bit consistently in both hash and non-hash modes.
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-5-qiuxu.zhuo@intel.com
In channel selection hash mode, the hardware decoding logic always
includes the channel interleave bit in XOR operations. However, the
hash mask may or may not include this channel interleave bit. When
the mask does include this bit, the current igen6_edac code performs
XOR on the interleave bit twice, effectively ignoring it - which is
incorrect.
Fix this issue by ensuring the hash mask always includes the interleave
bit, so XOR is performed on the interleave bit exactly once.
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-4-qiuxu.zhuo@intel.com
The address translation logic splits the memory space into interleaved
and non-interleaved regions using a boundary at 2 * s_size.
The current check uses '>' and incorrectly classifies the boundary
address (2 * s_size) as part of the interleaved region. This leads to
incorrect channel/sub-channel selection at the region boundary.
Fix the classification by using '>=' so that the boundary address is
handled in the non-interleaved region, matching the hardware layout.
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-3-qiuxu.zhuo@intel.com
The current method to get DIMM width relied on DEV_* enum ordering via a
linear offset (+ DEV_X8), tightly coupling hardware encoding to enum layout.
Replace it with explicit decoding to remove this dependency, as the
enum is expected to grow with additional device widths.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-2-qiuxu.zhuo@intel.com
Currently, if regcache_sync() fails after the enable GPIO has been
asserted, the driver returns with enable_gpio still set high and
regcache_cache_only() left disabled. This leaves the device state
inconsistent with the disabled state, where the enable GPIO is low and
cache_only is enabled.
On failure, restore the original state by setting cache_only back to
true and driving the enable GPIO low before returning the error.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260729100018.66577-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The comments for call_rcu_tasks() and call_rcu_tasks_rude() referred
to "RCU read-side critical sections", which is ambiguous. specify
"rcu-tasks" and "rcu-tasks rude" respectively to match the actual
flavor being described.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This 'commit 1612160b91 ("rcu-tasks: Eliminate deadlocks involving
do_exit() and RCU tasks")' has reimplemented the rcu_tasks_postscan(),
and the synchronize_srcu() has been removed, this commit therefore
rename tasks_rcu_exit_srcu_stall_timer to tasks_rcu_exit_stall_timer.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rdp->cpu_no_qs.s field is accessed only by the current CPU,
but can be accessed both at task level and from interrupt handlers.
All accesses from interrupts-enabled code must therefore be marked.
This commit therefore converts from __this_cpu_read() to this_cpu_read(),
but only in interrupts-enabled code, that is, the rcu_qs() function.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When CONFIG_KASAN=y and CONFIG_KASAN_STACK=y builds, the
show_rcu_gp_kthreads() exceeds the 1024-byte frame-size limit:
make kernel/rcu/tree.o KCFLAGS="-fstack-usage"
DESCEND objtool
DESCEND bpf/resolve_btfids
INSTALL libsubcmd_headers
CC kernel/rcu/tree.o
In file included from kernel/rcu/tree.c:4998:
kernel/rcu/tree_stall.h: In function 'show_rcu_gp_kthreads':
kernel/rcu/tree_stall.h:994:1: warning: the frame size of 1656 bytes is larger than 1024 bytes [-Wframe-larger-than=]
grep show_rcu kernel/rcu/tree.su
tree_nocb.h:1622:13:show_rcu_nocb_state 896 dynamic,bounded
tree_stall.h:933:6:show_rcu_gp_kthreads 1784 dynamic,bounded
tree_stall.h:1102:13:sysrq_show_rcu 16 static
Wrap the pr_info() into two noinline_for_stack helpers function:
show_rcu_state() print rcu_state status, and show_rcu_node()
print single rcu_node status.
After apply this change:
grep show_rcu kernel/rcu/tree.su
tree_stall.h:955:22:show_rcu_node 696 dynamic,bounded
tree_stall.h:930:22:show_rcu_state 872 dynamic,bounded
tree_nocb.h:1622:13:show_rcu_nocb_state 896 dynamic,bounded
tree_stall.h:972:6:show_rcu_gp_kthreads 544 static
tree_stall.h:1113:13:sysrq_show_rcu 16 static
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
rcu_all_qs() and rcu_note_context_switch() read/clear the per-CPU
->rcu_urgent_qs and ->rcu_need_heavy_qs flags with plain raw_cpu_read()
and this_cpu_write(), while the RCU core clears them with WRITE_ONCE() in
rcu_disable_urgency_upon_qs(). KCSAN flags the resulting same-CPU race:
BUG: KCSAN: data-race in rcu_all_qs / rcu_disable_urgency_upon_qs
It is benign -- the flags are advisory and rcu_all_qs() re-reads
->rcu_urgent_qs with smp_load_acquire() before acting on it -- but these
are the last unmarked accesses to the two flags; every other access
already uses READ_ONCE()/WRITE_ONCE()/smp_*. Mark them to match. No
functional change.
Reproduced on a PREEMPT_NONE, CONFIG_KCSAN_INTERRUPT_WATCHER=y kernel with
a pthreads program whose threads (two per CPU) loop reading a large file:
for (;;) {
int fd = open("/proc/kallsyms", O_RDONLY);
while (read(fd, buf, sizeof(buf)) > 0)
;
close(fd);
}
The read()s drive cond_resched() -> rcu_all_qs() while the busy CPUs keep
the grace period urgent, so the RCU core clears the flags concurrently.
Fixes: 2dba13f0b6 ("rcu: Switch urgent quiescent-state requests to rcu_data structure")
Signed-off-by: Itai Handler <itai.handler@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_check_gp_start_stall() works entirely on rnp parameter,
and never uses it's rdp parameter. this commit therefore drop it,
updating both callers and the declaration.
No functional change.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rdp->cpu_no_qs.b.norm field is accessed only by the current CPU,
but can be accessed both at task level and from interrupt handlers.
All accesses from interrupts-enabled code must therefore be marked.
This commit therefore converts from __this_cpu_read() to this_cpu_read(),
from __this_cpu_write() to this_cpu_write(), and plain C-language accesses
to READ_ONCE() and WRITE_ONCE(), but only in interrupts-enabled code.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The called functions already log failures where appropriate. Remove the
error log here to avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20260729073532.56468-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20260729073532.56468-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the RPPX1 driver to allow setting the gamma sensor linearization
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the gamma out correction
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the lens shade correction
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the color correction matrix
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the black level measurement
and gain configuration. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the histogram measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the exposure measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the white balance gain
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the RPPX1 driver to allow setting the white balance measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The Renesas R-Car ISP block consists of two different IP blocks, one
CSI-2 Channel Selector (CSISP) and one traditional ISP for image
operation (ISPCORE). The R-Car ISP driver currently supports the CSISP
functionality as part of the video capture pipeline, this change adds
support for the ISPCORE functionality.
The ISPCORE functionality is further split in two parts, a Renesas
specific part and a Dream Chip Real-time Pixel Processor IP part
(RPPX1). The Renesas part deals with I/O to/from the block while the
RPPX1 part deals with the actual ISP functions.
The RPPX1 functionality is implemented in a support framework (DCT
RPPX1) as this block can be used by different vendors or setups. This
change deals with the Renesas part of exposing the V4L2 elements needed
for a user-space interface to the RPPX1 and deals with the DMA to/from
the RPP block. It also facilitates the user-space V4L2 API to allow
configuring the RPPX1 using the DCT RPPX1 support framework.
The functionality exposed are one input video device where RAW bayer
frames can be queued for processing, one output video device where the
debayerd image can be read as either ABGR32 or NV16M format. Further
more a video device to queue the image processing parameters to
configure the RPPX1 IPS as well as a video device to read statistics
about the processed image is available.
There is no change in the operation of the CSISP functionality.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[ VSPX interfacing + locking sanitizing ]
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a framework driver for Dreamchip RPPX1 ISP. The driver aims to
provide a framework for other V4L2 based drivers to drive the RPPX1
functionality. The reason for this split is that the RPPX1 IP itself do
not provide any DMA engines to drive data to/from the device, instead it
depends on other IP blocks to implement these features.
While the peripherals around the RPPX1 ISP used in different designs and
by different vendors are different the RPPX1 core itself is the same.
For this reason the framework solution to be able to split the Dreamchip
RPPX1 driver from vendors usage of it have been picked in hope to reduce
duplication of the common parts.
The design is to try and keep the surface of this framework as small as
possible. The intention of this change is to be able to fill all needs
of this.
* Two functions to create and destroy a RPPX1 instance, rppx1_create()
and rppx1_destory(). These are intended to be called in the users
probe and remove code paths.
* Two functions to start and stop the RPPX1 processing, rppx1_start()
and rppx1_stop(). These are intended to be called in the users
stream on and stream off code paths.
* One function to ask the RPPX1 to process parameters buffer prepared
by user space, rppx1_params(). The intention is to call this
function when the parameter buffer is queued to the V4L2 driver and
the result stored by the driver until the time it needs to be
written to the RPPX1. It's the users responsibility to write it
either using MMIO or other means.
* One function to fill in a statistic buffer based on the current
status of the RPPX1, rppx1_stats_fill_isr(). The intention is that
the user call's this in its interrupt handler when it knows the
RPPX1 is done processing a frame.
* One function to ack and retrieve the interrupts generated by the
RPPX1, rppx1_interrupt(). The intention is to call this function
when the users interrupt handler detects the RPPX1 have raised and
interrupt. There is no need for the user to understand, or act, on
the actual RPPX1 interrupt, but it can if it wants too.
The initial support in the framework is limited and do not implement any
ISP processing algorithms other then configuring the RPPX1 to process
any Bayer (8-, 10, or 12-bit) image and produce either a RGB or YUYV
output. It do however probe all function blocks of the RPPX1 and provide
an interface to interact with both parameter and statistic bufferers.
The user of the framework will not change as algorithms for the
different function blocks of the ISP are being added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add the scaffolding for the parameters and statistics buffers for
Dreamchip RPPX1. The parameters for each ISP function block will be
added together with the logic for it.
In addition to the scaffolding add a common struct that describes the
measurement window. This struct is not specific to any block and will
used by many of them.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
[Niklas: Commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Register V4L2 metadata fourcc codes for the Dreamchip RPP-X1 ISP
parameters and statistics buffers. These formats are used by the driver
to exchange ISP configuration and 3A statistics with userspace through
the extensible parameters framework.
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add two helper functions to v4l2-isp to handle statistics:
- v4l2_isp_stats_init_buffer() to initialize a statistics buffer
- v4l2_isp_stats_init_block() to initialize a statistics block in the
next available memory location of a buffer
The v4l2_isp_stats_init_buffer() resets the data size counter of the
buffer and initializes its 'version' field.
The v4l2_isp_stats_init_block() helper accepts the type of the stats
block about to be populated, an array of per-block-type information and
the maximum size of the v4l2-isp buffer. If enough space for the new
block is available, the function increments the
v4l2_isp_buffer.data_size counter, initializes the new stats block
header and returns a pointer to the block for the driver to populate it.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Use the newly introduced per-block validation in v4l2-isp framework to
implement a validation callback for the AWB and AE configuration blocks
to make sure the configured metering zones do not exceed the hardware
capabilities.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Drivers are expected to provide to the helper function
v4l2_isp_params_validate_buffer() a list of 'struct
v4l2_isp_params_block_type_info' entries, one for each supported ISP block.
The type 'struct v4l2_isp_params_block_type_info' so far only contained the
expected block size for the core framework to validate the declared block
size against the expected one.
For some blocks, drivers might want to implement more precise per-block
validations. Add a function pointer member to 'struct
v4l2_isp_params_block_type_info' to allow drivers to register a callback
and call it from the core framework during validation.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rename v4l2_isp_params_buffer_size() to v4l2_isp_buffer_size() to
support statistics.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rework the userspace-api documentation of V4L2 ISP to support
statistics.
Update all occurences of 'v4l2_isp_param' types to match the uAPI
changes and add a section to document the statistics serialization
format.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Update on uAPI changes]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the v4l2-isp extensible format introduced for isp parameters buffers
to the support buffers of ISP statistic.
Like for ISP configuration purpose, that will help supporting various ISP
hardware versions reporting different statistics data with less impact on
userspace.
Rename all 'v4l2_isp_params' types to generic 'v4l2_isp' types to
prepare to use them for statistics as well and maintain the existing
types for compatibility with existing userspace only.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Rework to remove 'v4l2_isp_stats' and unify types]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Each int3472_gpio_map entry currently maps exactly one ACPI HID to a
GPIO quirk. As more sensors needing the same quirk are identified, this
means adding a full duplicate table entry per HID, differing only in
the HID string, which does not scale.
Change int3472_gpio_map::hid to a NULL-terminated hids array so a
single entry can match any number of ACPI HIDs, letting new HIDs be
added to the relevant array instead of duplicating quirk entries.
Cc: linux-media@vger.kernel.org
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Tested-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The HM1092 is a mono IR sensor used for face unlock on Intel IPU6 and
IPU7 laptops. Without an entry here the sensor endpoint is built with no
link-frequencies property, the driver rejects every mode and the sensor
never binds.
Two frequencies are listed because the sensor is driven from a different
external clock depending on the platform, with the PLL programmed to
match: 180480000 Hz on Dell (19.2 MHz EXTCLK) and 180000000 Hz on ASUS
(24 MHz).
Assisted-by: Claude:claude-opus-5
Signed-off-by: Jake Steinman <j@metarealtyinc.ca>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively.
Fixes: 3f02cb2fd9 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself.
Fixes: 4f76617378 ("vfio-ccw: protect the I/O region")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The fsm_notoper() routine is called when the device has been
lost, and is (by definition) no longer operational. Since this
can happen asynchronously from the normal behavior of the
driver, the cleanup may happen when holding other locks
in the calling sequence (notably, the cio subchannel lock).
Push the cleanup of the private->cp resources to a workqueue,
where it can be done out from under that lock sequence and
a future patch can safely manage the locking requirements.
Fixes: 204b394a23 ("vfio/ccw: Move FSM open/close to MDEV open/close")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: e5f84dbaea ("vfio: ccw: return I/O results asynchronously")
Fixes: 3f02cb2fd9 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The introduction of the capability chain rightly clamped the
region indexes to the range of the capabilities itself, but
neglected to do so for the existing read/write regions which
should also be enforced.
Fixes: db8e5d17ac ("vfio-ccw: add capabilities chain")
Cc: stable@vger.kernel.org
Cc: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Sashiko pointed out that get_guest_idal() unconditionally calculates
the length of the IDAL presuming everything is a Format-2 IDAW.
The output of vfio-ccw is always Format-2, but the input can be either
Format-1 (31-bit addresses) or Format-2 (64-bit addresses). As a result,
the size of the guest IDAL may be incorrect and should be trimmed down.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260720203400.7328E1F000E9@smtp.kernel.org/
Fixes: 1b676fe3d9 ("vfio/ccw: handle a guest Format-1 IDAL")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with.
Fixes: 01aa26c672 ("s390/cio: Combine direct and indirect CCW paths")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The routine ccwchain_calc_length() counts the number of channel
command words (CCWs) that are chained together in a single channel
program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs.
The loop itself is "do..while (count < 257)", and while the logic in
is_cpa_within_range() correctly adjusts between the 0-index array of
CCWs and the count of CCWs starting at 1, this means it would look
at a possible 257th CCW before ending the loop and (correctly)
returning an error.
Fix this by restructuring the loop to break as soon as 256 CCWs
(thus indexes 0-255) are examined, without looking at memory
outside the range.
Fixes: 0a19e61e6d ("vfio: ccw: introduce channel program interfaces")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The processing of channel programs, and the CCWs within them, is done
recursively. As such, there is an arbitrary (but not architectural)
limit to the number of CCWs that can exist in a single channel program.
The vfio-ccw logic breaks these channel programs into segments whenever
it encounters a Transfer-In-Channel (TIC) CCW, and the combined number
of segments count towards the global limit. Impose an equivalent limit
to the number of segments until such logic can be made non-recursive.
Fixes: 0a19e61e6d ("vfio: ccw: introduce channel program interfaces")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic.
Fixes: 8b515be512 ("vfio-ccw: Fix memory leak and don't call cp_free in cp_init")
Cc: stable@vger.kernel.org
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Export populate_rate_format() as sdca_asoc_populate_rate_format() so that
it can be used by codec drivers.
The codec driver could get rate and format information for the IT/OT entity.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260729032237.3750805-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the sdca_find_entity_by_label() helper so that codec drivers can
locate SDCA entities by their labels.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260729032227.3750770-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The problem scenario:
If we have a folio mmapped shared and then somebody does a dio read with
that folio as the read destination, then it is possible that the dio
will see a dirty destination page when it starts (and thus skip
dirtying and just GUP pin it) but then while it is doing the read, btrfs
finishes writing it back and by the endio, the folio is clean. In that
case, the dio read must re-dirty the folio with aops->dirty_folio():
btrfs_check_read_bio()
|- __iomap_dio_bio_end_io() from btrfs_bio_end_io()
|- bio_check_pages_dirty()
|- bio_dirty_fn()
|- bio_release_pages(bio, true)
|- __bio_release_pages(bio, mark_dirty == true)
|- folio_lock()
|- folio_mark_dirty()
|- aops->dirty_folio()
|- folio_unlock()
A data block normally moves through writeback as follows:
TASK
folio_lock
write clean -> dirty bit + delalloc
folio_unlock
WRITEBACK
for-each-dirty-folio:
folio_lock
run_delalloc delalloc consumed -> dirty bit + OE
submission dirty bit consumed -> writeback bit + OE
folio_unlock
ENDIO
endio OE bytes accounted
OE finish writeback -> clean; destroy OE
Three critical invariants that this path maintains are:
I1. Any dirty block is covered by delalloc xor an ordered extent
I2. Any dirty block covered by an OE will be submitted into that OE
I3. Any dirty block already submitted into an OE will not be submitted
again into the same OE.
These ensure that the block will be written exactly once. It is clear
that not reserving delalloc for the re-dirty case violates I1.
This situation, even without bs < folio_size, has long required btrfs to
fixup such dirty pages during writeback with an asynchronous worker that
is allowed to do this expensive work and writeback does not proceed for
a folio while it is doing this work.
Commit 247e743cbe ("Btrfs: Use async helpers to deal with pages that
have been improperly dirtied") introduced the COW fixup to catch exactly
this class at writeback, way back in 2008.
Since then, there have been many advances to prevent most of the causes
of such re-dirtying and we thought we could get away with removing the
annoying cow-fixup in the hope of simplifying writeback for large folio
support.
Commit b2a9f217ad ("btrfs: remove the COW fixup mechanism")
Commit 4927b14187 ("btrfs: remove folio ordered flag and subpage bitmap")
Since it turns out this assumption was incorrect, as evidenced by the
report and attendant reproducers, we must reintroduce the fixup concept.
This is of course critically further complicated by bs < folio_size. In
that case, rather than just a folio dirty bit, we have a bitmap for the
dirty blocks in the folio. And the (also broken) invariant is:
I4. folio dirty IFF at least one block bitmap dirty.
The original report of a stall on a misinterpreted empty bitmap is
exactly evidence of a violation of I4.
It is exactly because of bs < folio_size we don't want to simply revert the
removal patches. The original fixup was not properly bs < folio_size
aware, which motivated removal in the first place. So we wish to build a
bs < folio_size aware fixup.
One other important detail from the old design, any normal write that
happens after a re-dirty but before a fixup is racing with the cow fixup
to do the delalloc reservation, therefore it must cancel the fixup state.
If it arrives after the reservation exists, it will be a normal dirty
overwrite. This critically informs the design in a pretty clear way.
fixup requiring re-dirty has folio granularity, while cancellation has
delalloc (block) granularity so while we only ever produce fixup in
chunks of folios, we must be able to clear it in blocks. Therefore we
must track the blocks needing fixup at block granularity.
The obvious way to do this is with a new bitmap in btrfs_folio_state,
but it is desirable to avoid that if possible. Unfortunately, I don't
think it is possible and the reason is subtle and leans on a sort of
extreme reproducer, but I think can be explained relatively succinctly.
Consider a folio whose two halves will land in different ordered extents
(can be accomplished with tricks using nodatasum) and a dio read is
running with it as the shared mmap destination.
1. The front half:
a. folio comes clean on a normal write
b. dio read completes into the folio marking it fixup.
c. a write comes for the previous folio for a range extending into
this folio, this is a cancellation of the fixup which reserves
space.
d. writeback runs on the range *not* overlapping the folio. This half
remains dirty but is now covered by an OE and is awaiting
writeback running on its range to be submitted and finish the OE.
2. The back half:
a. the folio is part of an OE that gets far enough along to clear
writeback.
b. dio read completes into the folio marking it fixup.
After this, the folio's front half is dirty in the "normal" sense, it
needs to be submitted to the OE waiting for it. It's a cancelled fixup.
Meanwhile, the second half is a true fresh fixup. So at this point if we
run writeback on this folio, we genuinely can't know what to do without
block level information. If we submit it, we submit unreserved dirty
from the back half. If we don't, we will never finish the OE waiting for
it. So it's either a corruption or a deadlock.
Thus, the full high level design picture:
- btrfs_data_dirty_folio(): For out of band non-reserving dirties,
mark still-clean blocks inside EOF dirty and set their fixup bits
(the event carries no range, so every clean block is suspect).
Already-dirty blocks are covered or pending and are left alone.
- Writeback: skip fixup blocks and enqueue work for them
- writepage_fixup(): for each fixup block do the fixup reservation in a
worker, after which the blocks can be written back normally.
- Typical reserving write paths cancel fixup state for the ranges they
cover with btrfs_folio_cancel_fixup()
Link: https://lore.kernel.org/linux-btrfs/20260721191152.101118-1-borntraeger@linux.ibm.com/
Assisted-by: LLM
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
