GDM3 and GDM4 ports require GDM2 loopback to be enabled for hardware
QoS offload to function. Without it, HTB and ETS offload on these ports
do not work.
Previously, GDM3/GDM4 ports were automatically configured as WAN with
GDM2 loopback enabled during ndo_init().
Add the capability to configure GDM3/GDM4 as WAN/LAN on demand when QoS
offload is created or destroyed.
Hook airoha_enable_qos_for_gdm34() into TC_HTB_CREATE so that requesting
HTB offload on a GDM3/GDM4 LAN port switches it to WAN mode and enables
GDM2 loopback.
Introduce the AIROHA_DEV_F_TX_QOS flag to track whether a device has an
active TX HTB qdisc; set it in airoha_tc_setup_qdisc_htb() on successful
TC_HTB_CREATE and clear it on TC_HTB_DESTROY. The device keeps its WAN
role after qdisc teardown so that its configuration is preserved until
another device explicitly needs the WAN role for QoS offload.
If another GDM3/GDM4 device already holds the WAN role without an active
TX qdisc, demote it to LAN before promoting the requesting device. Skip
the demotion when the requesting device is itself already the WAN device.
Since airoha_dev_set_qdma() can now be called on a running device to
migrate between QDMA blocks, make dev->qdma an RCU pointer so the TX path
can safely dereference it without holding RTNL.
When migrating between QDMA blocks, stop TX queues, swap the pointer via
rcu_assign_pointer(), then synchronize_rcu() to ensure no in-flight
ndo_start_xmit holds the old pointer.
Serialize netdev_tx_completed_queue() calls via per-TX-queue spinlocks
txq_lock[] so that both the old and new QDMA NAPI instances can complete
packets concurrently on the same netdev TX queues without racing on
dql_completed().
Hold flow_offload_mutex in airoha_enable_qos_for_gdm34() and
airoha_disable_qos_for_gdm34() around the dev->flags update,
airoha_dev_set_qdma() and GDM2 loopback configuration, serializing
against concurrent airoha_ppe_hw_init() in the TC_SETUP_CLSFLOWER
offload path.
Introduce airoha_qdma_deref() helper that wraps rcu_dereference_protected()
with a lockdep condition accepting either rtnl_lock or flow_offload_mutex,
and use it across all control-path dereferences of the RCU-protected
dev->qdma pointer.
Add airoha_disable_gdm2_loopback() to disable GDM2 hw loopback.
Tested-by: Madhur Agarwal <madhur.agrawal@airoha.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260725-airoha-ethtool-priv_flags-v12-3-5136a30b2157@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
airoha_qdma_get_tx_ets_stats() has two bugs:
- The hardware counters read via airoha_qdma_rr() are 32-bit values
but are stored in u64 locals and subtracted from u64 baselines. When
a 32-bit hardware counter wraps around, the subtraction produces a
large underflow value passed to _bstats_update().
- The baseline counters (cpu_tx_packets, fwd_tx_packets) are stored as
single per-device fields, but airoha_qdma_get_tx_ets_stats() is
called with different channel values (0-3). Each call reads a
different channel's hardware counter but overwrites the same
baseline, corrupting the delta computation for other channels.
Fix both by:
- Narrowing the counter locals and baselines to u32 so that 32-bit
unsigned subtraction handles wrap-around naturally.
- Grouping the baselines into a per-channel qos_stats array so each
channel tracks its own previous counter value independently.
- Splitting the delta addition into two statements so the first u32
delta is widened to u64 on assignment and the second is added in
u64 arithmetic, preventing overflow when both deltas are large.
Fixes: 20bf7d07c9 ("net: airoha: Add sched ETS offload support")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260725-airoha-ethtool-priv_flags-v12-2-5136a30b2157@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename the airoha_priv_flags enum to airoha_dev_flags and the
AIROHA_PRIV_F_WAN flag to AIROHA_DEV_F_WAN. The "priv_flags" naming
dates back to an earlier design that used ethtool private flags; since
this series switched to tc qdisc offload for LAN/WAN configuration,
align the naming to reflect that these are per-device flags rather than
ethtool private flags.
While at it, switch to test_bit()/set_bit()/clear_bit() APIs and
convert the flags field from u32 to unsigned long to make flags
manipulation atomic.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260725-airoha-ethtool-priv_flags-v12-1-5136a30b2157@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In alc269_probe(), codec->bus->pci is dereferenced without a NULL check
for the ALC236 vendor ID case. Add the missing check, consistent with
the existing pattern used elsewhere in the same function.
Signed-off-by: Bob Song <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260730015302.253008-2-songxiebing@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
alc_read_coef_idx() and alc_read_coefex_idx() can return -1 on error
via snd_hda_codec_read(). Several codec initialization and shutdown
functions save these return values and later write them back to
hardware registers without checking for errors, potentially corrupting
COEF register state on a read failure.
Add error checks in:
- alc282_init() and alc282_shutup(): check coef78 before write-back
- alc285_hp_init(): check coef38/coef0d/coef36 before update, check
val before write-back, and break polling loop on error
- alc294_hp_init(): break polling loop on read error
Signed-off-by: Bob Song <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260730015302.253008-1-songxiebing@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable audio output through the AW88399 woofer amplifiers on Lenovo
Legion laptops by adding the necessary Realtek ALC287 fixups and
AW88399 per-model quirks.
Realtek fixups (alc269.c):
* ALC287_FIXUP_AW88399_I2C_2: registers the AW88399 as a two-instance
I2C companion codec using comp_generic_fixup, matching ACPI HID
"AWDZ8399".
* ALC287_FIXUP_LENOVO_LEGION_AW88399: forces DAC 0x02 for the bass
speaker pin 0x17, as the default DAC 0x06 lacks volume controls.
Also applies internal microphone boost calibration via
alc269_fixup_limit_int_mic_boost and disables unused pin 0x1d
to match the Windows driver's pin configuration.
Chained to ALC287_FIXUP_AW88399_I2C_2.
Per-model quirks (aw88399_hda.c):
* Channel swap: the I2C wiring on these Legion models is reversed
(0x34 is physically the right speaker, 0x35 is the left). The
quirk swaps the channel assignment to correct L/R audio.
* BSTS status bypass: the AW88399's boost-finished status bit (BSTS,
SYSST register bit 9) does not reliably assert on this hardware.
Register dumps during normal playback show both amplifiers
reporting BSTS=0 on both channels despite clean audio output.
The quirk sets the bsts_unreliable flag, introduced in
commit b4530a3e48 ("ASoC: aw88399: add per-instance BSTS status bypass flag"),
so the startup status check skips the BSTS requirement
on these devices.
The R9000P ADR10 entries use HDA_CODEC_QUIRK and are placed before
the existing SND_PCI_QUIRK for 17aa:38bb (Yoga S780-14.5 Air) to
ensure the codec SSID match takes priority over the shared PCI SSID,
following the pattern established by e.g.
commit 0f3a822ae2 ("ALSA: hda/realtek: Fix quirk matching for Legion Pro 7"),
commit dd074f04e0 ("ALSA: hda/realtek: Fix Legion 7 16ITHG6 speaker amp binding").
All other entries also use HDA_CODEC_QUIRK for consistency.
Supported models (Lenovo vendor ID 0x17aa):
* 0x3906: Legion Pro 7i 16IAX10H / Y9000P IAX10 (Intel)
* 0x3907: Legion Pro 7i 16IAX10H / Y9000P IAX10 (Intel)
* 0x3927: Legion R9000P ADR10 (AMD)
* 0x3928: Legion R9000P ADR10 (AMD)
* 0x3938: Legion Pro 7 16AFR10H (AMD)
* 0x3939: Legion Pro 7 16AFR10H (AMD)
Tested-by: Nadim Kobeissi <nadim@symbolic.software>
Tested-by: Xia Yun'an <imitoy@imitoy.top>
Tested-by: Munzir Taha <munzirtaha@gmail.com>
Co-developed-by: Yakov Till <yakov.till@gmail.com>
Signed-off-by: Yakov Till <yakov.till@gmail.com>
Signed-off-by: Marco Giunta <marco_giunta@outlook.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/DS7PR19MB7724ACD7C8D1BE71451E1AEEFCCA2@DS7PR19MB7724.namprd19.prod.outlook.com
Add an HDA side codec driver for the AWINIC AW88399 smart amplifier,
enabling its use as a companion amplifier on HDA systems where the
chip is connected via I2C to the host and driven alongside a primary
HDA codec (such as Realtek ALC287).
The driver is structured after the existing side codec drivers:
* aw88399_hda_i2c.c: I2C bus driver matching ACPI HID "AWDZ8399" and
serial-multi-instantiate device name "aw88399-hda".
Creates the regmap and passes it to the shared probe function,
following the CS35L41/CS35L56/TAS2781 pattern.
* aw88399_hda.c: Core driver implementing HDA component binding,
playback hooks (using the shared library's start/stop functions),
ACPI subsystem ID retrieval, and runtime/system power management.
Includes per-model quirk infrastructure using ACPI subsystem ID
matching; the quirk table is empty in this patch and populated in
the next patch along with the corresponding Realtek fixups that
activate the driver.
The driver includes <sound/aw88399.h> for shared definitions and
depends on SND_SOC_AW88399_LIB for chip initialization, firmware
loading, and playback control, avoiding any dependency on the full
ASoC codec module.
Tested-by: Nadim Kobeissi <nadim@symbolic.software>
Tested-by: Xia Yun'an <imitoy@imitoy.top>
Tested-by: Munzir Taha <munzirtaha@gmail.com>
Co-developed-by: Yakov Till <yakov.till@gmail.com>
Signed-off-by: Yakov Till <yakov.till@gmail.com>
Signed-off-by: Marco Giunta <marco_giunta@outlook.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/DS7PR19MB77247D67E739956AA4611ACEFCCA2@DS7PR19MB7724.namprd19.prod.outlook.com
Register the AWINIC AW88399 ACPI hardware ID "AWDZ8399" with the
serial-multi-instantiate driver and add it to the ACPI scan ignore
list so that the two I2C amplifier instances on Lenovo Legion laptops
are enumerated as separate I2C client devices rather than a single
ACPI platform device.
The SMI node creates two instances named "aw88399-hda" with
IRQ_RESOURCE_AUTO, matching the pattern used by CS35L41.
Tested-by: Nadim Kobeissi <nadim@symbolic.software>
Tested-by: Xia Yun'an <imitoy@imitoy.top>
Tested-by: Munzir Taha <munzirtaha@gmail.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Yakov Till <yakov.till@gmail.com>
Signed-off-by: Yakov Till <yakov.till@gmail.com>
Signed-off-by: Marco Giunta <marco_giunta@outlook.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/DS7PR19MB7724431AE60B3D2280E73492FCCA2@DS7PR19MB7724.namprd19.prod.outlook.com
rcu_access_pointer() should only be used to test the value of a pointer,
not to dereference it. As it's in a spin_lock_bh() critical section, use
rcu_dereference_bh() instead, avoiding an extra rcu_read_lock().
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Netlink calls may access TCP global vars (i.e. when attaching
a TCP socket), therefore we need to make sure the
latters are initialized beforehand.
For this reason move the global TCP initialization at the top
of the module init function.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_mp_alloc() tried to disable SEND_REDIRECTS on a multipeer
interface, but it runs from ovpn_net_init() (->ndo_init), which
register_netdevice() invokes before the NETDEV_REGISTER notifier
chain. The IPv4 in_device is only created when that notifier reaches
inetdev_event() -> inetdev_init(), so __in_dev_get_rtnl() always
returned NULL at ndo_init time and the whole redirect-disabling block
(both the per-device and the per-netns IPV4_DEVCONF_ALL write) was
dead. MP interfaces therefore kept emitting ICMP redirects.
Disabling redirects only once is not enough either: the IPv4
in_device is destroyed and recreated when the interface is moved to a
different network namespace (NETDEV_UNREGISTER/NETDEV_REGISTER), and
the newly created in_device inherits the destination namespace
defaults, silently re-enabling SEND_REDIRECTS.
Disable redirects from ovpn_net_open() (->ndo_open) instead: it runs
every time the interface is brought up, including after the in_device
has been recreated, so the setting is always re-applied. This mirrors
what wireguard does in wg_open(). RTNL is held on the ndo_open() path,
so __in_dev_get_rtnl() is safe.
Fixes: 05003b408c ("ovpn: implement multi-peer support")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
The by_transp_addr table is keyed on the peer's remote transport
address, but the float rehash hashed bind->remote directly, while the
two other sites that touch the table build a clean key first:
ovpn_peer_add_mp() and the lookup in ovpn_peer_get_by_transp_addr()
both hash a sockaddr holding only family/address/port.
For a link-local IPv6 peer, bind->remote carries sin6_scope_id (set
from ipv6_iface_scope_id() when the endpoint is learned), and that
field is folded into the jhash() over sizeof(struct sockaddr_in6).
The lookup never sets sin6_scope_id, so after such a peer floats it is
rehashed into a scope_id-dependent bucket that lookups (scope_id 0)
never visit, making the peer unreachable through the by_transp_addr
fallback. ovpn_peer_transp_match() only compares address and port, so
the hash was keying on a field the match ignores.
sin6_scope_id must stay in bind->remote because the TX path uses it as
flowi6_oif, so it cannot just be cleared there. Instead build the hash
key from family/address/port only, exactly like ovpn_peer_add_mp() and
the lookup, so all three sites agree on the bucket.
Fixes: f0281c1d37 ("ovpn: add support for updating local or remote UDP endpoint")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_peer_endpoints_update() builds the new remote endpoint in an
on-stack struct sockaddr_storage that is left uninitialized. For IPv4
only sin_family/sin_addr/sin_port are written, leaving the 8-byte
sin_zero padding as stack garbage (for IPv6, sin6_flowinfo is left
uninitialized likewise).
ovpn_peer_reset_sockaddr() -> ovpn_bind_from_sockaddr() then memcpy()s
sizeof(struct sockaddr_in)/sizeof(struct sockaddr_in6) bytes - padding
included - into bind->remote. That buffer is later hashed with jhash()
over the same length to place the peer in the by_transp_addr table, so
the garbage padding lands the floated peer in an essentially random
bucket. Lockless lookups in ovpn_peer_get_by_transp_addr() build their
key from a zero-initialized sockaddr_storage, compute a different bucket
and fail to find the peer.
This is also a plain use of uninitialized stack memory in jhash().
Build the floated endpoint with a designated initializer so the
padding (sin_zero for IPv4, sin6_flowinfo for IPv6) is zeroed as part
of the assignment. This keeps the padding out of the by_transp_addr
hash key without memset-ing the whole sockaddr_storage on every
received packet.
Fixes: f0281c1d37 ("ovpn: add support for updating local or remote UDP endpoint")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Some subsystems, like BPF SOCKMAP, set sk_user_data without
actually setting the encap_type.
For this reason, we must make sure that the type is the
one ovpn expects before dereferencing sk_user_data.
Failing to do so may lead to out-of-bounds reads.
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
When userspace updates a peer's remote endpoint via OVPN_CMD_PEER_SET,
ovpn_nl_peer_modify() installs a new ovpn_bind through
ovpn_peer_reset_sockaddr(), but ovpn_nl_peer_set_doit() only calls
ovpn_peer_hash_vpn_ip() to refresh the VPN-IP hashtables. The peer is
left in the bucket of peers->by_transp_addr corresponding to its old
remote address.
As a consequence, datagrams arriving at the UDP RX path from the newly
configured remote hash to a different slot and the lockless lookup in
ovpn_peer_get_by_transp_addr() (called from ovpn_udp_encap_recv()) does
not find the peer, until either a float event or a peer re-add fixes
the bucket.
Introduce ovpn_peer_hash_transp_addr() (modeled after
ovpn_peer_hash_vpn_ip()) and invoke it from ovpn_nl_peer_set_doit()
whenever the request carried a new remote address. The helper bails
out in P2P mode and on peers without a bind (TCP), and relies on
hlist_nulls_del_init_rcu()'s pprev==NULL short-circuit to handle the
case of an entry not currently linked in the table.
Fixes: 1d36a36f6d ("ovpn: implement peer add/get/dump/delete via netlink")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip().
Fixes: 1d36a36f6d ("ovpn: implement peer add/get/dump/delete via netlink")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Large keepalive values can overflow the delayed-work delay on 32-bit
systems, causing the keepalive worker to be repeatedly scheduled.
A correct configuration should not require such large keepalive values,
and an upper limit of one day is already generous and unnecessary in
practice. Limit both the keepalive interval and timeout to 86400 seconds.
Signed-off-by: Marco Baffo <marco@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
This adds a couple of fixes and improvements for multiple
MediaTek SoCs.
In particular:
- Indentation/whitespace fixes for some devicetrees
- Documentation improvements for MediaTek Mute-X
- dtbs-check warnings fixes
- MT8390 Tungsten boards: removal of unnecessary cells
- MT6795 SoC: removal of deprecated property in UART DMA
- MT6359 PMIC's RTC now uses the correct compatible string
- MT8183/86/88/92/95 SoCs gain support for the UART DMA IPs
- MT8186 gets a new CCI OPP table to resolve lockups
- MT8188/83 Chromebooks now got the correct SPI NOR supply
- MT8192 Asurada drops support for the (unused) MMC1 port
- MediaTek Genio 510/700/1200 EVKs and Radxa NIO-12L now get
their PMIC power input tree completed with assignment of
the correct supplies
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCamsKqBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeMdDAP49I6x+l77XLzg/PRjbNu7Af5TB30dZ
8U9Lg/JVkt3ErgEAuTKsOhlN43fk0iBcvmK/A6nLMWW0lb7RnbhAXyRXXwI=
=3hmo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iRpe
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates
This adds a couple of fixes and improvements for multiple
MediaTek SoCs.
In particular:
- Indentation/whitespace fixes for some devicetrees
- Documentation improvements for MediaTek Mute-X
- dtbs-check warnings fixes
- MT8390 Tungsten boards: removal of unnecessary cells
- MT6795 SoC: removal of deprecated property in UART DMA
- MT6359 PMIC's RTC now uses the correct compatible string
- MT8183/86/88/92/95 SoCs gain support for the UART DMA IPs
- MT8186 gets a new CCI OPP table to resolve lockups
- MT8188/83 Chromebooks now got the correct SPI NOR supply
- MT8192 Asurada drops support for the (unused) MMC1 port
- MediaTek Genio 510/700/1200 EVKs and Radxa NIO-12L now get
their PMIC power input tree completed with assignment of
the correct supplies
* tag 'mtk-dts64-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt6359: use proper compatible for rtc
arm64: dts: mediatek: mt8395-radxa-nio-12l: Add MT6365 PMIC supplies
arm64: dts: mediatek: mt8395-genio-common: Add MT6365 PMIC supplies
arm64: dts: mediatek: mt8390-genio-common: Add MT6365 PMIC supplies
arm64: dts: mediatek: mt8192-asurada: Disable mmc1 on Spherion
dt-bindings: soc: mediatek: mutex: Improve title and description
arm64: dts: mediatek: mt8195: Add and use UART AP_DMA controller
arm64: dts: mediatek: mt8192: Add and use UART AP_DMA controller
arm64: dts: mediatek: mt8188: Add and use UART AP_DMA controller
arm64: dts: mediatek: mt8186: Add and use UART AP_DMA controller
arm64: dts: mediatek: mt8183: Add and use UART AP_DMA controller
arm64: dts: mediatek: mt6795: Remove deprecated UART DMA property
arm64: dts: mediatek: tungsten-smarc: Remove unnecessary cells
arm64: dts: mediatek: Correct indentation and whitespace
arm64: dts: mediatek: mt8188-geralt: Add supply for SPI NOR flash
arm64: dts: mediatek: mt8183-kukui: Add supply for SPI NOR flash
arm64: dts: mediatek: mt8186: change CCI OPP scaling mapping
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This fixes a minor indentation issue in the MT8127 devicetree
and adds support for the Auxiliary ADC found in the MT6323 PMIC.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCamsCiBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeBPiAP9lr1/GKI8x8ic4JtzZRYfTf9wOJUjL
L+k64fFBWZHn8wD+MBGSwiCXpudcN4GkLS0HKN7UkDL5gcdlCgZ4DbeLAgA=
=PxxN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rAn0
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts32-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 DeviceTree updates
This fixes a minor indentation issue in the MT8127 devicetree
and adds support for the Auxiliary ADC found in the MT6323 PMIC.
* tag 'mtk-dts32-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: mt6323: add AUXADC support
ARM: dts: mediatek: mt8127: Correct indentation
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a fix for a missing error check in mtk-socinfo, and
also a missing MODULE_DEVICE_TABLE() in the mtk-dvfsrc driver.
Besides from that, this also reworks how the MMSYS tables are
specified with the macro, separating the component's hardware
instance from the actual type, resolving a prerequirement for
the restructuring of mediatek-drm.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCamsBiRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeFUuAQCcdpIBGxycSOIoG5uxijcx8w7uhmf9
FJMPm4LiDF5LgwD/bn2CqDMCrkNQysoErQkhVlOczLbKJSQ69QGFuSGLlwo=
=TyOH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ew69
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek SoC driver updates
This adds a fix for a missing error check in mtk-socinfo, and
also a missing MODULE_DEVICE_TABLE() in the mtk-dvfsrc driver.
Besides from that, this also reworks how the MMSYS tables are
specified with the macro, separating the component's hardware
instance from the actual type, resolving a prerequirement for
the restructuring of mediatek-drm.
* tag 'mtk-soc-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: add missing MODULE_DEVICE_TABLE()
soc: mediatek: mtk-mmsys: Use MMSYS_ROUTE() in default routing table
soc: mediatek: mtk-mmsys: Rework routes to specify component ID
soc: mediatek: mtk-socinfo Add error handling in devm_kasprintf()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The position pointer is only advanced if the return value of the proc
handler is positive at new_sync_write(). Therefore no need to manually
reset it when doing error handling.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260727091834.6645-2-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The position pointer is only advanced if the return value of the proc
handler is positive at new_sync_write(). Therefore no need to manually
reset it when doing error handling.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260727091834.6645-1-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
slab_debugfs_init() creates the slab debugfs root at device initcall
time, while slab_sysfs_init() moves slab_state to FULL at late initcall
time. SLAB_STORE_USER caches created in this window miss their debugfs
entries because do_kmem_cache_create() skips debugfs_slab_add() when
slab_state <= UP. This was observed with MPTCP's request_sock_subflow_v6
cache, whose slab debugfs directory was missing.
The affected window is:
slab_debugfs_init()
slab_debugfs_root = debugfs_create_dir(...)
list_for_each_entry(s, &slab_caches, list)
debugfs_slab_add(s)
kmem_cache_create(..., SLAB_STORE_USER, ...)
do_kmem_cache_create()
if (slab_state <= UP)
return without debugfs entries
slab_sysfs_init()
slab_state = FULL
Initialize the debugfs root and add debugfs entries while holding
slab_mutex, walking slab_caches exactly once and handling both sysfs
and debugfs entries in the same pass. This gives the sysfs and debugfs
initialization an explicit order and prevents caches from being
created between the debugfs scan and slab_state reaching FULL.
Gate the new slab_late_init() on either sysfs or debugfs being enabled,
with the slab_kset creation and alias_list processing factored into
helpers that have empty no-sysfs variants, as suggested by Vlastimil
Babka. On slab_kset_init() failure, slab_state stays below FULL so
kmem_cache_create() keeps taking the early-boot path, matching prior
behavior.
Guard debugfs_slab_release() against an uninitialized debugfs root,
since the root is now created later and a cache may be released before
it exists.
Fixes: 1a5ad30b89 ("mm: slub: make slab_sysfs_init() a late_initcall")
Cc: stable@vger.kernel.org
Suggested-by: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Link: https://patch.msgid.link/20260729101849.3734287-1-lixiasong1@huawei.com
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Daniele Palmas says:
====================
Improve wwan qcdm compatibility with user-space tools
Historically, Qualcomm diagnostic port was a serial device, so user-space
tools were developed using tty specific features. One of the most common
tool is, for example, ModemManager libqcdm, available at
https://gitlab.freedesktop.org/mobile-broadband/ModemManager
which requires tcgetattr/tcsetattr and the possibility to get exclusive
device access to properly work.
The wwan qcdm is not really a tty device, but, besides the lack of tty
functions, it behaves as a standard serial Qualcomm diagnostic port, so,
as c230035c2f ("net: wwan: core: implement terminal ioctls for AT port"),
this series add support for terminal ioctls also for qcdm ports and
implement the exclusive open mode feature to improve compatibility with
user-space tools.
This is an incremental change which should not affect the existing tools
using wwan which do not rely on the implemented features.
====================
Link: https://patch.msgid.link/20260724142909.3270824-1-dnlplm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add exclusive open mode capability to AT and QCDM ports to improve
compatibility with user-space tools using the Qualcomm diagnostic
device (e.g. libqcdm).
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724142909.3270824-3-dnlplm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Upstream libqcdm requires IOCTLs support to work, so add the current
AT minimalistic support also to the QCDM port.
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://patch.msgid.link/20260724142909.3270824-2-dnlplm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the GPIO controller found on Realtek DHC RTD1625 SoCs.
Unlike the existing Realtek GPIO driver (drivers/gpio/gpio-rtd.c),
which manages pins via shared bank registers, the RTD1625 introduces
a per-pin register architecture. Each GPIO line now has its own
dedicated 32-bit control register to manage configuration independently,
including direction, output value, input value, interrupt enable, and
debounce. Therefore, this distinct hardware design requires a separate
driver.
The RTD1625 GPIO controller has a hardware quirk where both 'assert'
and 'de-assert' interrupts are fired simultaneously on any edge toggle.
The driver works around this quirk to correctly handle edge interrupts.
Interrupt support is optional for this device, matching the dt-bindings.
If the interrupts property is not provided, the driver simply skips IRQ
initialization and operates purely as a basic GPIO controller.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://patch.msgid.link/20260726125209.140307-10-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add a new set_config callback to allow drivers to implement
hardware-specific configuration such as debounce settings, or other
platform-specific GPIO properties.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-8-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Introduce a new optional 'value_xlate' callback. This routine allows drivers
to translate or modify the register value and mask immediately before a write
operation. It is particularly useful for hardware that requires additional
control bits, such as a write-enable bit, to be appended to the data
dynamically.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-7-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Extend the reg_mask_xlate callback with an operation type parameter
(enum gpio_regmap_operation) to allow drivers to return different
register/mask combinations depending on the specific GPIO operation.
Consequently, update all existing drivers utilizing the gpio-regmap
framework (across drivers/gpio, drivers/iio, and drivers/pinctrl)
to accommodate the new reg_mask_xlate function signature.
Acked-by: William Breathitt Gray <wbg@kernel.org>
Acked-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> #for-iio
Suggested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-6-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Order kernel-doc descriptions with the actual appearance.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-5-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When GPIO regmap creates an IRQ chip on behalf of the user, it also
takes an ownership of the respective callbacks and driver data.
With that being done, apply default resource callbacks that keep
tracking the IRQ requests and releases.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-4-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When GPIO regmap based driver supplies its own IRQ domain, it might
still want to keep track of the IRQ requests and releases, in particular
to prevent a GPIO, which is used and locked as IRQ, to be requested
via standard ways. Provide default callbacks for such cases and keep
struct gpio_chip private to GPIO regmap implementation.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-3-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
This reverts commit a57e27c43b.
The driver will be rewritten to use the gpio-regmap infrastructure
once Andy Shevchenko's patches for gpio-regmap are applied.
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-2-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Enable CPU DVFS on Milk-V Jupiter by including the OPP tables and wiring the
CPU nodes to the CPU regulator supply.
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://patch.msgid.link/20260729160749.1621415-2-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
- Fix OF/device_node reference count leaks in imx_src_init(),
imx7_src_init(), and the AVIC interrupt controller driver
- Drop obsolete/unused declarations from `arch/arm/mach-imx/common.h`
- firmware: imx: scu: Refactor mailbox channel management to use a
per-instance handle instead of a global one
- firmware: imx: sm-misc: Add NULL check for `kmalloc` return value in
syslog_show
- soc: imx9: Add error handling for `devm_kasprintf` return value
-----BEGIN PGP SIGNATURE-----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=uGEB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4zKa
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/arm
i.MX SoC Changes for v7.3
- Fix OF/device_node reference count leaks in imx_src_init(),
imx7_src_init(), and the AVIC interrupt controller driver
- Drop obsolete/unused declarations from `arch/arm/mach-imx/common.h`
- firmware: imx: scu: Refactor mailbox channel management to use a
per-instance handle instead of a global one
- firmware: imx: sm-misc: Add NULL check for `kmalloc` return value in
syslog_show
- soc: imx9: Add error handling for `devm_kasprintf` return value
* tag 'imx-soc-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux:
firmware: imx: scu: manage mailbox channels and global handle
soc: imx9: devm_kasprintf error handling
ARM: imx: Drop obsolete stuff from common.h
firmware: imx: sm-misc: Add NULL check for kmalloc in syslog_show
ARM: imx: fix device_node refcount leaks in imx7_src_init()
ARM: imx: fix device_node refcount leak in imx_src_init()
ARM: imx: avic: Fix OF node reference leaks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Correct the ESPI interrupt specifiers for PCIe SMMU and QUP nodes in
Glymur.
Correct the GIC address cells on Monaco, to avoid DeviceTree validation
failures introduces in v7.2-rc1.
Drop the secondary interrupt from the GPU SMMU on Purwa.
Fix the invalid PDC IRQ mapping for SC8280XP to ensure associated GPIOs
have functional interrupt handling. Correct the EC interrupt on Huawei
Matebook E Go.
Reduce the depth of the requested sleep state for SDM850-based Lenovo
Yoga C630, to work around the regression of suspend crashing the
machine.
Adjust the IPA IMEM address on SM8650, to avoid clobbering the wrong
memory region in IMEM.
Correct the DSI1 PHY reference clock on Eliza, to ensure that the right
clock rate is used.
-----BEGIN PGP SIGNATURE-----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=ajjy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zvJZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for 7.2
Correct the ESPI interrupt specifiers for PCIe SMMU and QUP nodes in
Glymur.
Correct the GIC address cells on Monaco, to avoid DeviceTree validation
failures introduces in v7.2-rc1.
Drop the secondary interrupt from the GPU SMMU on Purwa.
Fix the invalid PDC IRQ mapping for SC8280XP to ensure associated GPIOs
have functional interrupt handling. Correct the EC interrupt on Huawei
Matebook E Go.
Reduce the depth of the requested sleep state for SDM850-based Lenovo
Yoga C630, to work around the regression of suspend crashing the
machine.
Adjust the IPA IMEM address on SM8650, to avoid clobbering the wrong
memory region in IMEM.
Correct the DSI1 PHY reference clock on Eliza, to ensure that the right
clock rate is used.
* tag 'qcom-arm64-fixes-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: eliza: Fix DSI1 phy reference clock rate
arm64: dts: qcom: sdm850-lenovo-yoga-c630: lower PSCI cluster idle
arm64: dts: qcom: sc8280xp: gaokun3: correct EC interrupt pin
arm64: dts: qcom: sc8280xp: add several missing pdc map entries
arm64: dts: qcom: sm8650: Fix IPA IMEM slice
arm64: dts: qcom: monaco: Add default GIC address cells
arm64: dts: qcom: purwa: Fix GPU IOMMU property
arm64: dts: qcom: glymur: fix QUP serial engine IRQs
arm64: dts: qcom: glymur: fix PCIe SMMU interrupts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On the Banana Pi BPI-CM6 module, the buck1 and buck2 voltage regulators,
which supply the CPU core voltage, are configured with a maximum output
voltage of 3.45V, while the highest operating point requires only
1.050V. This means that a kernel bug, OPP misconfiguration, or
privileged userspace could request a voltage above the safe operating
limit, causing possible permanent CPU damage.
Set the maximum regulator voltage to 1.050V instead.
Fixes: 46a8c01700 ("riscv: dts: spacemit: k1: Add Banana Pi BPI-CM6 IO board")
Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729150722.1598630-7-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
On the OrangePi R2S board, the buck1 and buck2 voltage regulators, which
supply the CPU core voltage, are configured with a maximum output
voltage of 3.45V, while the highest operating point requires only
1.050V. This means that a kernel bug, OPP misconfiguration, or
privileged userspace could request a voltage above the safe operating
limit, causing possible permanent CPU damage.
Set the maximum regulator voltage to 1.050V instead.
Fixes: 793cc54475 ("riscv: dts: spacemit: enable PMIC on OrangePi R2S")
Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net
Cc: stable@vger.kernel.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729150722.1598630-6-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
On the MusePi Pro board, the buck1 and buck2 voltage regulators, which
supply the CPU core voltage, are configured with a maximum output
voltage of 3.45V, while the highest operating point requires only
1.050V. This means that a kernel bug, OPP misconfiguration, or
privileged userspace could request a voltage above the safe operating
limit, causing possible permanent CPU damage.
Set the maximum regulator voltage to 1.050V instead.
Fixes: e2dac7c7a3 ("riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure")
Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net
Cc: stable@vger.kernel.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729150722.1598630-5-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
On the OrangePi RV2 board, the buck1 and buck2 voltage regulators, which
supply the CPU core voltage, are configured with a maximum output
voltage of 3.45V, while the highest operating point requires only
1.050V. This means that a kernel bug, OPP misconfiguration, or
privileged userspace could request a voltage above the safe operating
limit, causing possible permanent CPU damage.
Set the maximum regulator voltage to 1.050V instead.
Fixes: c02c047b92 ("riscv: dts: spacemit: Define the P1 PMIC regulators for OrangePi RV2")
Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net
Cc: stable@vger.kernel.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729150722.1598630-4-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
On the Milk-V Jupiter board, the buck1 and buck2 voltage regulators,
which supply the CPU core voltage, are configured with a maximum output
voltage of 3.45V, while the highest operating point requires only
1.050V. This means that a kernel bug, OPP misconfiguration, or
privileged userspace could request a voltage above the safe operating
limit, causing possible permanent CPU damage.
Set the maximum regulator voltage to 1.050V instead.
Fixes: 7d307daa12 ("riscv: dts: spacemit: Define the P1 PMIC regulators for Milk-V Jupiter")
Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net
Cc: stable@vger.kernel.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729150722.1598630-3-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
On the Banana Pi BPI-F3 board, the buck1 and buck2 voltage regulators,
which supply the CPU core voltage, are configured with a maximum output
voltage of 3.45V, while the highest operating point requires only
1.050V. This means that a kernel bug, OPP misconfiguration, or
privileged userspace could request a voltage above the safe operating
limit, causing possible permanent CPU damage.
Set the maximum regulator voltage to 1.050V instead.
Fixes: 09a412d397 ("riscv: dts: spacemit: define regulator constraints")
Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net
Cc: stable@vger.kernel.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729150722.1598630-2-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@kernel.org>
max_nr_stripes is updated under cache_size_mutex in the stripe cache
grow/shrink paths, while is_inactive_blocked() and
raid5_end_read_request() read it without that lock.
Use READ_ONCE() for those reads in lockless path to match the WRITE_ONCE()
updates and avoid KCSAN data race reports.
A similar issue was previously fixed in commit-id:
dfd2bf4367.
Fixes: 0009fad033 ("raid5 improve too many read errors msg by adding limits")
Fixes: 3514da58be ("md/raid5: Make is_inactive_blocked() helper")
KCSAN report:
=================
BUG: KCSAN: data-race in grow_one_stripe / is_inactive_blocked
write (marked) to 0xffff8f01f0b5a268 of 4 bytes by task 12616 on cpu 9:
grow_one_stripe+0x2d8/0x320
raid5d+0xb57/0xba0
md_thread+0x15a/0x2d0
[..........]
read to 0xffff8f01f0b5a268 of 4 bytes by task 12670 on cpu 11:
is_inactive_blocked+0x97/0xc0
raid5_get_active_stripe+0x2fd/0xa70
raid5_make_request+0x4aa/0x2940
[..........]
value changed: 0x000003b9 -> 0x000003ba
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/20260624024042.2561803-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
An ADS (alternative data stream) is a named $DATA (0x80) attribute.
Until now ntfs3 ignored named data attributes entirely, so the only
stream reachable from userspace was the unnamed one.
Introduce a colon-delimited name syntax so streams can be reached
through the regular VFS interfaces. ntfs_nls_to_utf16() now splits a
lookup name at ':' and stores the stream part in cpu_str::ads_len (the
previously unused padding byte). ntfs_iget5_flags() first instantiates
the base inode, then allocates a second inode whose ->base points at it
and whose ->file.ads holds the stream name. ntfs_test_inode() compares
the stream name as well as the MFT reference, so base and streams get
distinct inodes for the same record.
Because the MFT record belongs to the base inode, the many helpers in
frecord.c and attrlist.c that operate on the record redirect to
ni->base, and ni_lock() and friends take the base inode's mutex. The
attrib.c paths that used to hardcode an unnamed $DATA lookup now pass
ni->file.ads.{name,len}. ni_write_inode() and ni_write_parents() are
no-ops for stream inodes, and ntfs_setattr() drops ATTR_SIZE for them.
Usage, for a file with streams 'ads1' and 'ads2':
cat file:query_streams - list stream names, one per line
cat file:ads1 - read a stream
touch file:ads3 - create a stream on an existing file
rm file:ads1 - remove a stream
The pseudo-stream 'query_streams' is handled in ntfs_file_read_iter()
via ni_query_ads(), which enumerates named $DATA attributes and returns
their names separated by '\n'.
The feature is controlled by the new 'ads' mount option, enabled by
default; mount with 'ads=0' to restore the previous behaviour.
Not implemented yet:
- creating a file and a stream in a single call
- renaming (moving) a stream
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
ntfs_file_read_iter() and ntfs_file_splice_read() store both error codes
and the number of bytes transferred in a variable named 'err', which is
misleading on the success path. Rename it to 'ret'.
While here, rename the 'in' parameter of ntfs_file_splice_read() to
'file' for consistency with the rest of the file, and add a local 'ni'
instead of calling ntfs_i() inline.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
