Introduce xe_page_size_alloc_ctrl_mode and add page_size_alloc_ctrl
state to struct xe_device along with mutex lock.
The new control supports forcing user BO allocations to 2M pages,
forcing them to 1G pages, or using a mixed round-robin mode across
4K, 64K, 2M, and 1G page sizes. Track the current mixed-mode index
in xe_device so allocation policy can be applied consistently.
v2
- make cur_index to atomic as update need in later patch to
avoid race/concurency (sashiko)
v3
- reworded comments
- protect mode/index updates with a mutex for proper concurrency handling
v4(sashiko)
- move xe_debug_page_size_alloc_ctrl_init() before drm_dev_register(),
so mutex and control states are initialized
before any userspace visibility
v5(Himal)
- Guard all the debug page size policy code under CONFIG
- Squash Kconfig patch to have Kconfig entry for DEBUG_PAGE_SIZE
- Add inline to check debug page size support and exact mode
configured if it is supported.
v6 (fix CI build)
v8 (Himal)
- use drmm_mutex_init to avoid leak with mutex_init
- call xe_debug_page_size_alloc_ctrl_init unconditionally
- Add missed mixed mode check on xe_debug_page_size_mode_not_none check
- Add xe_debug_page_size_mode_is_mixed() function
v9
- make xe_debug_page_size_alloc_ctrl_init() return int
- fail probe if drmm_mutex_init() for page_size_alloc_ctrl.lock fails
Signed-off-by: Nareshkumar Gollakoti <naresh.kumar.g@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260729121843.1255891-2-naresh.kumar.g@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Implement event handler of BTF_EVNT_BT_LEAUDIO_INFO C2H command, and
related coexistence mechanism for Bluetooth LE-Audio feature.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-15-pkshih@realtek.com
I/O offload higher priority sending event didn't return after H2C command
was sent, add a return to prevent send twice in the same time. Update
driver info entry which is handling module control info didn't handle the
version 9 command format, add if condition to handle it. TX power update
H2C command result checker logic was reversed, it will lead to the TX
power value never update again after first update, fix the issue.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-14-pkshih@realtek.com
fcxtdma=8 was not handled in _chk_btc_report(), causing the parser to
hit 'goto err' and return 0 when processing the TDMA sub-report. This
broke the _parse_btc_report() loop before reaching BT_VER (type=9),
leaving bt->ver_info.fw always zero on RTL8922A/D.
TDMA v8 uses the same struct layout as v3/v4/v7 (rtw89_btc_fbtc_tdma_v3,
12 bytes), so add it to the existing v3/v4/v7 branch in both switch cases.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-13-pkshih@realtek.com
RTL8922A (FW >= 0.35.111) and RTL8922D (FW >= 0.35.94) set fcxbtver,
fcxbtscan and fcxbtafh to 8, but the handler in _chk_btc_report only
had branches for version 1 and 7. When version 8 arrived pfinfo was
left NULL and pcinfo->req_len was left at zero, so the length check at
validation stage rejected the report and bt->ver_info.fw was never
written, causing BT_FW:0x0 in the BTC dump.
BT-scan and BT-afh version 8 hit the goto err path for the same reason,
making all BT sub-reports silently broken on these chips.
The structural change in version 8 is that the previously reserved
second byte in each struct is now bt_id (0 = BT0, 1 = BT1), allowing
firmware to send separate reports for each Bluetooth device. All three
structs are otherwise layout-compatible with version 7.
Add rtw89_btc_fbtc_btver_v8, rtw89_btc_fbtc_btscan_v8 and
rtw89_btc_fbtc_btafh_v8 structs with the bt_id field, extend the
corresponding unions, add version 8 branches to _chk_btc_report, and
update _update_bt_report to route each report to BT0 or BT1 according
to BT ID.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-11-pkshih@realtek.com
Fix the log output format in _show_mreg_v7() where the phy-0 gnt_status
line was missing the proper field label and newline. Use the standard
" %-15s : " format with "[gnt_status]" label consistent with the rest
of the dump output.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-10-pkshih@realtek.com
BT-coexistence only needs to record RF calibration is doing or not, don't
need to record the status of the calibration steps.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-9-pkshih@realtek.com
Complete the implementation of _fw_set_gpio() function to support all
GPIO control configuration types for coexistence. Included debug signal,
antenna switch, external I2C mailbox, external PTA related GPIO
configuration. This function is called during initialization and when
BT re-enables.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-8-pkshih@realtek.com
While Wi-Fi is doing special packet handshake, or going into some
transient state, BT-Coexistence will held timer to fix control logic
to protect the segment. Set the protection duration to 1 second,
it is enough to cover the situation.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-7-pkshih@realtek.com
To make logic more clearly, separate _ntfy_role_info into two function by
data collecting and using.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-6-pkshih@realtek.com
rtw89_btc_wl_link_info is duplicated declaring in the function, remove one
of them. We need MAC Address only when Wi-Fi role is station, included the
copy operation into if statement.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-5-pkshih@realtek.com
Add BTC version table entries for RTL8922A and RTL8922D. The new firmware
need driver provide more chip initial related parameters.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-4-pkshih@realtek.com
The info included MLO status, hardware status, firmware will set
corresponding register control to do coexistence (PTA slot priority,
RF switch etc.)
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260724135640.3195044-3-pkshih@realtek.com
In the last error path in rtl_pci_probe(), the cleanup functions are
skipped due to a wrong goto label. Moreover, the successful call to
rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to
be reverted. Fix this issue by updating the labels and adding the
relevant cleanup functions to the last error path.
Fixes: 0c8173385e ("rtl8192ce: Add new driver")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723120118.145383-1-nihaal@cse.iitm.ac.in
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path.
Fixes: b5dc8873b6 ("wifi: rtlwifi: Add rtl8192du/sw.c")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723114539.136986-1-nihaal@cse.iitm.ac.in
Commit 7738a7ab9d ("misc: eeprom: eeprom_93cx6: Add quirk for extra
read clock cycle") added extra 'quirk' field to struct eeprom_93cx6.
Many existing users of eeprom_93cx6, including rtl818x drivers, allocate
the structure on the stack without initializing all fields. As a result,
the added quirk field has an undefined value and can randomly cause
reading wrong data from the EEPROM.
Fix by initializing the structures with {}.
Fixes: 7738a7ab9d ("misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle")
Cc: stable@kernel.org # v6.13+
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723110640.8588-1-stf_xl@wp.pl
cros_ec_debugfs_probe() registers notifier_panic with the EC panic
notifier chain. The remove path tears down debugfs and the console log,
but leaves the notifier registered. A later panic notification can call
back into the removed instance and queue work that accesses released
data.
Unregister the panic notifier before tearing down the debugfs and
console log state.
This issue was found by a static analysis tool.
Fixes: d90fa2c64d ("platform/chrome: cros_ec: Poll EC log on EC panic")
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://lore.kernel.org/r/f3ab74ef8034be63bb45a325f3d54656d658817f.1785320940.git.getshell@seu.edu.cn
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: use devm_mutex_init
This series fixes mutex teardown in the Realtek DSA drivers.
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() must be called before
the mutex is discarded. Using devm_mutex_init() lets the driver core
handle that automatically.
The changes are split into individual commits based on the feature that
introduced each lock to allow proper backports to stable trees.
====================
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-0-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 336e3e4a1a ("net: dsa: realtek: rtl8365mb: add FDB support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-4-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 9da2c8672f ("net: dsa: realtek: rtl8365mb: add VLAN support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-3-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 907e772f6f ("net: dsa: realtek: allow subdrivers to externally lock regmap")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-2-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-1-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make cleanup functions return void since no one is checking
their return values
Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260723203601.806697-4-michail.tatas@gmail.com
Drop the struct ili9805_instr and the init table
and use init functions.
Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260723203601.806697-3-michail.tatas@gmail.com
Convert functions mipi_dsi_* to mipi_dsi_*_multi as per the
gpu/todo file.
The multi variant of these functions include improved error
handling.
Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260723203601.806697-2-michail.tatas@gmail.com
Commit 6deb535950 ("net: remove unused ATM protocols and legacy
ATM device drivers") removed the remaining in-tree users of
atm_alloc_charge(), atm_pcr_goal(), sonet_copy_stats() and
sonet_subtract_stats().
Remove these unused exported helpers and their declarations. The
removal of the SONET statistics helpers also leaves
include/linux/sonet.h without users, so remove the internal header and
its MAINTAINERS entry.
Signed-off-by: Xiang-Bin Shi <eric91102091@gmail.com>
Link: https://patch.msgid.link/20260727054538.196437-1-eric91102091@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netc_timer_remove(), hardware interrupts are disabled by clearing
TMR_TEMASK before ptp_clock_unregister() is called. This may cause a
race condition during driver unbind that could leave hardware interrupts
active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable
TMR_TEMASK after it has been cleared, leaving a pending hardware
interrupt when the driver unbinds.
Since the NETC Timer does not support PCIe FLR, hardware state is not
reset during probe. When the driver is rebound and the IRQ is registered,
the pending interrupt fires immediately. At that point priv->tmr_emask
is still zero, so netc_timer_isr() does not clear the interrupt status
and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible
infinite interrupt storm.
Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so
it is not enabled when request_irq() runs, and clear TMR_TEMASK in
netc_timer_init() before enabling it. The IRQ is only enabled at the end
of probe once the timer has been reprogrammed and the PTP clock has been
registered. This ensures a stale pending interrupt from a previous unbind
or an unclean shutdown cannot be delivered before the driver is fully
initialized.
Second, in netc_timer_remove() call disable_irq() before
ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after
it. disable_irq() masks the line and waits for any in-flight
netc_timer_isr() to finish, so no ISR can dereference priv->clock after
ptp_clock_unregister() has freed it. Unregistering the PTP clock before
clearing the mask also guarantees that no in-flight or concurrent ioctl
can re-enable hardware interrupts.
Finally, return IRQ_NONE from netc_timer_isr() when the masked event
status is zero, so the kernel's spurious interrupt detection can disable
a stuck line instead of looping forever.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260720012508.23227-1-wei.fang%40oss.nxp.com
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260727060348.1887464-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_create_rxq() returns a struct mana_rxq pointer and returns NULL on
any failure. The caller, mana_add_rx_queues(), cannot tell what went
wrong and hardcodes the error as -ENOMEM. As a result the actual failure
reported by the lower layers (for example -EPROTO from a failed HW
request) is masked and every RX queue creation failure looks like an
out-of-memory error.
Return an ERR_PTR() encoded error code from mana_create_rxq() on failure
instead of NULL. The caller now propagates the returned error code
directly instead of substituting -ENOMEM.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260727113759.2881500-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya Maximets says:
====================
net: openvswitch: fix skb leak on flow key update failure
Fixes for two issues reported by Sashiko while reviewing other patches.
The root cause is the same, fixes and the Fixes are slightly different,
so two separate patches.
====================
Link: https://patch.msgid.link/20260727181851.306076-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: ec0d043d05 ("openvswitch: Ensure flow is valid before executing ct")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260727181851.306076-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_execute_actions() returns right away when execute_recirc() fails on
the last action as it assumes this function always takes ownership of
the skb when 'last' is true. But when the flow key update fails, the
function doesn't free the skb and it ends up leaked.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: 971427f353 ("openvswitch: Add recirc and hash action.")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260727181851.306076-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For E2E delay mechanism, "received DELAY_REQ without timestamp" error
messages show up for dwmac v3.70+ and dwxgmac IPs.
This issue affects socfpga platforms, Agilex7 (dwmac 3.70) and
Agilex5 (dwxgmac). According to the databook, to enable timestamping
for all events, the SNAPTYPSEL bits in the MAC_Timestamp_Control
register must be set to 2'b01, and the TSEVNTENA bit must be cleared
to 0'b0.
Commit 3cb958027c ("net: stmmac: Fix E2E delay mechanism") already
addresses this problem for all dwmacs above version v4.10. However,
same holds true for v3.70 and above, as well as for dwxgmac. Updates
the check accordingly.
Fixes: 14f347334b ("net: stmmac: Correctly take timestamp for PTPv2")
Fixes: f2fb6b6275 ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a")
Fixes: 3cb958027c ("net: stmmac: Fix E2E delay mechanism")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Link: https://patch.msgid.link/20260728060904.31993-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mt7530: fix swallowed MDIO read errors
While working on a register access cleanup for the mt7530 driver, the
Sashiko AI reviewers flagged long-standing error handling gaps in the
driver's read paths [1].
The MDIO regmap backend truncates negative bus->read() errnos into u16
register halves and returns success, handing garbage data to callers
and to read-modify-write cycles which then write it back to the switch.
The ATC/VTCR command polls and the MT7531 indirect PHY polls consume
reads through a helper which returns 0 when the underlying read fails.
A failed bus transaction thus clears the polled busy bit and is
mistaken for command completion, defeats the subsequent
ATC_INVALID/VTCR_INVALID checks the same way, and lets the indirect
PHY access functions return garbage PHY register data.
Fix the backend to propagate bus->read() errors, and convert the
command and PHY access polls to regmap_read_poll_timeout(), which
terminates polling on read errors and propagates them.
The cleanup series depending on these fixes will be submitted to
net-next separately after the next net/net-next merger.
[1] https://lore.kernel.org/netdev/cover.1784481922.git.daniel@makrotopia.org/
====================
Link: https://patch.msgid.link/cover.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MT7531 indirect PHY access functions poll MT7531_PHY_IAC through
a helper which returns 0 when the underlying read fails, so a failed
bus transaction clears MT7531_PHY_ACS_ST and the access carries on,
returning garbage PHY register data to phylib.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them. These functions hold the MDIO bus lock across the
whole sequence, so the unlocked regmap accesses remain correct. Remove
the now-unused _mt7530_unlocked_read().
Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/79e85d68d210cc37342978171aa6432aa2954333.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt7530_fdb_cmd() and mt7530_vlan_cmd() poll the command register
through a helper which returns 0 when the underlying read fails. A
failed bus transaction thus clears ATC_BUSY/VTCR_BUSY and is treated
as successful command completion, and the subsequent ATC_INVALID and
VTCR_INVALID checks are defeated the same way.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them, and check the completion status read as well. Take
the MDIO bus lock across the sequence as the switch regmap is set up
with locking disabled.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: 83163f7dca ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/eea1d8f15c54375b3770c23e09fb3217df487169.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bus->read() returns a negative errno on failure, but
mt7530_regmap_read() assigns it to a u16, truncating e.g. -ETIMEDOUT
into 0xff92, and returns success. The garbage word is then consumed as
register data, and read-modify-write cycles write it back to the
switch. Check both reads and propagate their errors.
The same defect existed in mt7530_mii_read() since the driver was
introduced and moved into the regmap backend unchanged.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/3c628e48276c2e5522c8795a6be60d11c7a76a7d.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-07-28 (idpf, ice, igc, igbvf, e1000)
Michael Bommarito adds bounds checking to ensure interrupt vector array
stays in-bounds on idpf.
Josh adjusts minimum value for Tx ring descriptors to prevent Tx
timeouts in flow based scheduling mode in idpf.
Yuho Choi frees IRQ name in error path to prevent memory leak for idpf.
Aaron Ma adds a wait for reset completion before returning from resume
on ice driver.
Dawid completely disables and clears VF interrupts during reset on ice.
Dawei Feng adjusts error path for ice loopback test setup and e1000 probe
to prevent memory leaks.
Przemek ignores, expected, -EBUSY errors that can occur during reset
and cause disabling of DPLL on ice.
David Carlier removes napi_synchronize() during igc_down for igc.
Matt Vollrath removes incorrect decrement of count which could cause
leaking due to off-by-one issue.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: fix memory leak in e1000_probe()
igbvf: Fix leak in TX DMA error cleanup
igc: remove napi_synchronize() in igc_down()
ice: suppress DPLL errors during reset recovery
ice: fix memory leak in ice_lbtest_prepare_rings()
ice: fix VF interrupts cleanup
ice: wait for reset completion in ice_resume()
idpf: Fix mailbox IRQ name leak on request failure
idpf: adjust TxQ ring count minimum
idpf: bound interrupt-vector register fill to the allocated array
====================
Link: https://patch.msgid.link/20260728210909.3042004-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Schippers says:
====================
Revert "tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops"
Commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop when
a qdisc is present") did not show a relevant performance regression in my
testing, but on Brett Sheffield's librecast testbed it causes a
significant throughput drop in an IPv6 multicast testcase. The regression
can be pinpointed to multiple iperf3 TCP threads sending: for 8 threads
the throughput dropped from 13.5 Gbit/s to 9.13 Gbit/s.
Therefore this series reverts the qdisc backpressure work.
Making the backpressure opt-in via a new IFF_BACKPRESSURE flag was
proposed in [1], but a new IFF_* flag needs more review scrutiny than is
available at the moment, so a revert was requested instead. The opt-in
will be resubmitted for net-next later.
[1] Link: https://lore.kernel.org/netdev/20260709095511.168235-1-simon.schippers@tu-dortmund.de/
Reported-by: Brett Sheffield <brett@librecast.net>
Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
====================
Link: https://patch.msgid.link/20260728092240.250257-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit d4c22d70d7.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-5-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit baf808fe4f.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit fba362c17d.
__ptr_ring_check_produce() has no users left after reverting
commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 1d6e569b7d.
The commit stops the netdev queue when the ptr_ring is full instead of
dropping the packet. My own tests showed no relevant regression, but on
Brett Sheffield's librecast testbed an IPv6 multicast testcase got
slower. With 8 iperf3 TCP threads sending, the throughput dropped from
13.5 Gbit/s to 9.13 Gbit/s.
Reported-by: Brett Sheffield <brett@librecast.net>
Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
-----BEGIN PGP SIGNATURE-----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=5+os
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Much quieter, thankfully:
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
* tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlegacy: replace BUG_ON() with WARN_ON() on num_stations check
wifi: mac80211: validate individual TWT params before driver setup
wifi: cfg80211: publish PMSR request before starting the driver
wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
wifi: mac80211: fix tid_tx use-after-free on BA session stop
wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event
wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID
wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices
wifi: ath12k: introduce host_alloc_ml_id hardware parameter
wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id
wifi: ath12k: factor out peer assoc send-and-wait into a helper
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
====================
Link: https://patch.msgid.link/20260729071954.45655-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- tracing/probes: Reject $arg0 in meta argument expansion
Reject $arg0 during meta-argument expansion to prevent negative index
calculation and out-of-bounds reading of traceprobe parameters.
- tracing/fprobe: Roll back on enable_trace_fprobe() failure
Add a rollback cleanup path when __register_trace_fprobe() fails
partway through to unregister registered probes and clear flags or
file links.
- fprobe: Fix module reference count leak on error in register_fprobe()
Ensure the module_put() cleanup loop runs even when get_ips_from_filter()
returns an error, preventing module reference count leaks.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpqCOQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bL3MIAIDcYue5MYMYlTUAq2TF
QIj0DszmO/moCiClZx4MjqG6I/saSYjxb6JND+FB+q5x7JHBJFzfe4Fu+rfHwXNU
Z45nX2q8ccFhFEa2mvJvC8y5XvYCMgz3uZC4FGdXNFbOhM5wXGr+Gp4AgpCUd6LX
PDoC164NaIodIEZ9rxHv3nulLNNLmM7ZmWZXNmHNLWL8YcJADiluVQbmx5b0b8IO
j7ce+RHdtkhuHkQ093A+CkzineS9Zo7BhcFiphse6WoXOm1OFP46Dc5S/w3o3Mn+
4dVHbbPOD6icLATzyH3LQn9xkRC1jgjZnINDFjszogHDUu23czrtjgpTVeUpoX5t
5p0=
=t4dL
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Reject $arg0 during meta-argument expansion to prevent negative index
calculation and out-of-bounds reading of traceprobe parameters
- Roll back on enable_trace_fprobe() failure
Add a rollback cleanup path when __register_trace_fprobe() fails
partway through to unregister registered probes and clear flags or
file links
- Fix module reference count leak on error in register_fprobe()
Ensure the module_put() cleanup loop still runs even when
get_ips_from_filter() returns an error, preventing module
reference count leaks
* tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix module reference count leak on error in register_fprobe()
tracing/fprobe: Roll back on enable_trace_fprobe() failure
tracing/probes: Reject $arg0 in meta argument expansion
Joe Damato says:
====================
Add PACKET_IGNORE_OUTGOING selftest for packet sockets
Greetings:
Following up on my previous series [1] and further extending the selftests
for packet sockets to test PACKET_IGNORE_OUTGOING.
I re-ran the tests and the existing and new tests all pass.
====================
Link: https://patch.msgid.link/20260728160935.4128982-1-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
