The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords.
Fixes: 271907ee2f ("net/mlx5: Query the maximum MCIA register read size from firmware")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260717072338.1240582-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Doruk Tan Ozturk says:
====================
vxlan, geneve: require CAP_NET_ADMIN in the device netns for changelink
The recent series "require CAP_NET_ADMIN in the device netns for
changelink" (8165f7ff57d9..27ccb68e7ccc) added rtnl_dev_link_net_capable()
and gated the eight IP tunnel drivers (ip_gre, ipip, ip_vti, ip6_tunnel,
ip6_gre, ip6_vti, sit, xfrm_interface). VXLAN and GENEVE share the exact
same shape but were not covered: both store the underlay netns sticky at
newlink (vxlan->net / geneve->net) and their changelink() operates on that
netns, while the generic RTM_NEWLINK path only checks CAP_NET_ADMIN against
dev_net(dev). Once such a device is created in or moved to another netns,
a caller privileged in dev_net(dev) but not in the underlay netns can
reconfigure the tunnel'"'"'s underlay.
This completes that series for the two UDP tunnel drivers that were left
out. Same helper, same placement (top of changelink, before any attribute
is parsed).
Verified on next-20260714 in QEMU with CONFIG_VXLAN=y + CONFIG_USER_NS=y:
an unprivileged user namespace holding CAP_NET_ADMIN only in a child netns
issues an IFLA_INFO_DATA changelink on a vxlan device whose underlay lives
in init_net. Before: returns 0 (reconfigures the init_net underlay).
After: returns -EPERM.
====================
Link: https://patch.msgid.link/20260716203500.70573-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 5b861f6baa ("geneve: add rtnl changelink support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260716203500.70573-3-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 8bcdc4f3a2 ("vxlan: add changelink support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260716203500.70573-2-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
llsec_do_decrypt_auth() computes the associated-data length for the
AEAD request as
assoclen += datalen - authlen;
where datalen is the number of bytes after the MAC header and authlen
(4, 8 or 16) is the length of the authentication tag. Nothing verifies
that the frame actually carries at least authlen payload bytes. A
secured frame whose payload is shorter than the tag makes
datalen - authlen negative; assoclen is then passed to
aead_request_set_ad() as an unsigned value close to 4 GiB, so
crypto_aead_decrypt() walks far off the end of the scatterlist that
only spans the real frame.
The frame is fully attacker-controlled and reaches this path from any
IEEE 802.15.4 peer in radio range. Reject frames whose payload is
shorter than the authentication tag before the subtraction.
Dynamically reproduced on a KASAN kernel as a general-protection-fault
in the AEAD scatterwalk, and the fix confirmed.
Fixes: 4c14a2fb5d ("mac802154: add llsec decryption method")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Link: https://patch.msgid.link/20260716193423.32498-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSPCT lookup table is monotonically decreasing except for ADC code
121, where the sequence reads -9.0 C, -1.0 C, -12.0 C. This makes the
reported battery temperature jump upward by eight degrees for one code
and then downward by eleven degrees for the next code.
The entry is a missing zero: use -10.0 C so the sequence remains
monotonic between -9.0 C and -12.0 C.
Fixes: 9652c02428 ("power: bq25890: add POWER_SUPPLY_PROP_TEMP")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/0619C8BF15F43B7C+20260723065444.1796002-1-raoxu@uniontech.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
raw_v4_match() is a lockless match helper under sk_for_each_rcu(). It
still reads inet->inet_daddr, inet->inet_rcv_saddr and
sk->sk_bound_dev_if with plain loads while bind, connect and
bind-to-device paths can update the same match fields concurrently.
Annotate only those mutable match fields in raw_v4_match(), and do so
at the point of use instead of hoisting the bound-device read before
the earlier short-circuit tests.
Also annotate the raw bind writer and the shared IPv4 datagram connect
writer used by raw sockets, so the address fields updated on bind and
connect match explicit WRITE_ONCE() updates.
This version intentionally leaves the shared disconnect-side IPv4
writers to follow-up cleanup and limits the writer changes here to the
raw bind path and the datagram connect path directly exercised by raw
sockets.
Fixes: 0daf07e527 ("raw: convert raw sockets to RCU")
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260716142958.3064224-1-runyu.xiao@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QRTR keeps its entire port and node state in module-global variables
that are not partitioned per network namespace: qrtr_local_nid is a
single global node id (always 1) and qrtr_ports is a single global
xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that
global state with no network-namespace check, and qrtr_create() places
no restriction on the namespace a socket is created in.
As a result an unprivileged process that creates an AF_QIPCRTR socket
in a separate network namespace, e.g. via
unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams -
including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR
sockets owned by another namespace, and vice versa. The receiving
socket sees such a message as coming from node id 1, indistinguishable
from a legitimate local client, breaking the isolation that network
namespaces are expected to provide.
QRTR is a transport to global hardware endpoints (the modem and other
remote processors) and has no per-namespace semantics; its in-kernel
name service already creates its socket in init_net only. Confine the
socket family to the initial network namespace, as other
non-namespace-aware socket families do (see llc_ui_create() and the
ieee802154 socket code).
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Link: https://patch.msgid.link/20260716154319.3297699-1-qwe.aldo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT.
Fixes: 2425c9e002 ("LoongArch: BPF: Support signed div instructions")
Fixes: 7b6b13d329 ("LoongArch: BPF: Support signed mod instructions")
Assisted-by: Claude:claude-opus-4-8
Acked-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Nicholas Dudar <main.kalliope@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When entering KDB via a breakpoint and then performing single-step
debugging, an oops is triggered. Now during single-step debugging,
kdb_local() expects the reason to be KDB_REASON_SSTEP, but it is
actually KDB_REASON_OOPS. In kdb_stub(), when determining the reason,
the ex_vector for single-step should be 0, as already implemented on
other architectures such as arm64 and riscv.
Before the patch:
[112]kdb> ss
Entering kdb (current=0x900020009f520000, pid 10661) on
processor 112 Oops: (null)
due to oops @ 0x90000000005b57a4
Cc: stable@vger.kernel.org
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged.
Cc: stable@vger.kernel.org
Fixes: 4a03b2ac06 ("LoongArch: Add kexec support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605051639.aEPioXdD-lkp@intel.com/
Co-developed-by: Kexin Liu <liukexin@kylinos.cn>
Signed-off-by: Kexin Liu <liukexin@kylinos.cn>
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, the LoongArch CPU topology initialization code calculates
each core's package ID by dividing its physical ID by loongson_sysconf.
cores_per_package. This relies on the assumption that cores_per_package
counts in the same domain as physical IDs.
On Loongson-3B6000 (XB612B0V_1.2), cores_per_package matches the visible
core count -- 24 in this case. However, the physical IDs range from 0 to
31 in a noncontinuous fashion:
$ cat /proc/cpuinfo | grep -i -F 'global_id'
global_id : 0
global_id : 1
global_id : 4
global_id : 5
global_id : 6
global_id : 7
global_id : 8
global_id : 9
global_id : 10
global_id : 11
global_id : 14
global_id : 15
global_id : 16
global_id : 17
global_id : 20
global_id : 21
global_id : 22
global_id : 23
global_id : 26
global_id : 27
global_id : 28
global_id : 29
global_id : 30
global_id : 31
Retrieve the exact package ID from ACPI PPTT when available, in the same
style as retrieving the core ID and thread ID in parse_acpi_topology().
Use this information in loongson_init_secondary() when the PPTT readout
is successful. The original division logic is kept as a fallback.
Meanwhile, since some existing code paths like loongson3_cpufreq expect
a continuous integer sequence of package IDs in [0, MAX_PACKAGES) when
retrieving from cpu_data[], here we also canonicalize the package ID to
be filled in parse_acpi_topology() to meet such an expectation.
Cc: stable@vger.kernel.org
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rong Bao <rong.bao@csmantle.top>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures.
Cc: <stable@vger.kernel.org>
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In some assembly files there are some instructions that only valid for
64BIT, but those files can be compiled for 32BIT and cause build errors.
So, replace those instructions with macros:
li.d --> LONG_LI (li.w or li.d), addi.d --> PTR_ADDI (addi.w or addi.d).
BTW, Re-tab the indention in the assembly files for alignment.
Cc: stable@vger.kernel.org # 6.19+
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
THREAD_INFO_IN_TASK increase the size of task_struct, which casuses a
build error for the 32BIT kernel if RANDSTRUCT is enabled. So increase
TASK_STRUCT_OFFSET as big as possible (2040), but can still be aligned
and be fit in the addi.w instruction.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use eDMA for XSPI AHB read to improve the performance.
Read with CPU
root@imx943evk:~# dd if=/dev/mtd0 of=/dev/null bs=32M count=1
1+0 records in
1+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.479719 s, 69.9 MB/s
Read with DMA
root@imx943evk:~# dd if=/dev/mtd0 of=/dev/null bs=32M count=1
1+0 records in
1+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.115788 s, 290 MB/s
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260722-xspi_dma_upstream-v3-2-6b7ff50cae8e@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dmas and dma-names to describe TX and RX DMA channels for the i.MX94
XSPI controller.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20260722-xspi_dma_upstream-v3-1-6b7ff50cae8e@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mmap() is documented to return MAP_FAILED on error, but tcp_mmap.c
compares the return value against (void *)-1 and (unsigned char *)-1.
Replace these with the standard MAP_FAILED macro for better readability
and type safety.
Signed-off-by: longlong yan <yanlonglong@kylinos.cn>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260722015129.916-1-yanlonglong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the cros_usbpd-charger driver probe iterates based on raw
charger port count returned by the embedded controller. The only check
is against the number of USB PD ports which the embedded controller
also defines. A malicious embedded controller could return an inaccurate
port count (up to 255) resulting in an out of bounds write and
subsequent memory corruption.
Update helper functions in cros_usbpd-charger to limit port counts to
EC_USB_PD_MAX_PORTS.
Fixes: 3af15cfacd ("power: supply: cros: add support for dedicated port")
Cc: stable@vger.kernel.org
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260722195059.1420738-1-jthies@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
rss_indir_user and rss_hkey_user are allocated and filled in
__set_rss_rxfh() when the user configures RSS via ethtool, but
nothing ever reads them. hinic_get_rxfh() fetches the state from
the device, and the hardware is programmed from the original
indir/key arguments. These buffers only leaked on driver unload.
Drop the unused allocations, memcpys, and struct fields.
Fixes: 4fdc51bb4e ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260722025353.328179-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Schnelle says:
====================
Add missing facility check to ptp_s390 driver
This patchset adds a missing facility check and a check that the 'query
physical clock' (PTFF QPT) function is actually available. If it's not
present, no qpt ptp device will be registered. In order to use ptff_query()
in a module, the first patch adds a EXPORT_SYMBOL() to export
ptff_function_mask.
====================
Link: https://patch.msgid.link/20260714130342.1971700-1-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only register the physical clock when facility 28 is installed
and PTFF QAF returns that PTFF QPT is available.
Fixes: 2d7de7a301 ("s390/time: Add PtP driver")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20260714130342.1971700-3-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Export the ptff_function_mask to make ptff_query() usable in modules.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20260714130342.1971700-2-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stmmac driver based on Synopsys' dwmac IP is used in a very wide
variety of SoCs and is currently very actively used and contributed to.
It has been orphaned in January 2025 after the previous maintainers
became inactive, but Russell King was providing very valuable reviews
and fixes for the driver at that point.
Now we're seeing more and more activity on the driver, but are lacking
people to test and review contributions to both glue drivers as well as
core stmmac code.
I have access to some variety of stmmac-based platforms such as socfpga
CycloneV, imx8mp, some Allwinner SoCs and stm32mp1xx boards that I can
run regression tests on, and I'm offering to step-up as a maintainer for
driver, for the time being at least.
Let's hope other people will eventually join this effort.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260722142125.1767689-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pppoe_sendmsg() saves a pointer to the PPPoE header before calling
dev_hard_header(). Device header callbacks are allowed to reallocate the
skb head, invalidating pointers into it.
This can happen when a send is blocked in copy_from_user() while the first
non-Ethernet port is added to an empty team device. The team's delegated
GRE header callback then expands the skb head. PPPoE subsequently writes
six bytes through the stale pointer into the freed head.
Reload the PPPoE header through the skb's network-header offset after
device header creation. pskb_expand_head() updates that offset when it
relocates the head.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260722093814.3017176-1-manizada@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several fields in struct ppp can be read or updated concurrently
from multiple CPUs without synchronization, causing data races:
1. ppp->mru is read concurrently in ppp_receive_nonmp_frame() while
being updated via PPPIOCSMRU ioctl. Protect ppp->mru updates in
PPPIOCSMRU with ppp_recv_lock(ppp).
2. PPPIOCGFLAGS reads ppp->flags, ppp->xstate, and ppp->rstate
unlocked. Wrap the read in ppp_lock(ppp) to get a consistent
snapshot.
3. ppp->debug is updated via PPPIOCSDEBUG and read concurrently on
fast paths. Annotate reads with READ_ONCE() and writes with
WRITE_ONCE().
4. ppp->last_xmit and ppp->last_recv are updated on TX/RX data paths
and read via PPPIOCGIDLE32 / PPPIOCGIDLE64 ioctls. Annotate with
WRITE_ONCE() / READ_ONCE() and use max() to handle jiffies
subtraction.
5. ppp->npmode[] is updated via PPPIOCSNPMODE and read on TX/RX
paths. Annotate with WRITE_ONCE() / READ_ONCE().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260722101605.2868548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When Linux forwards a packet and needs to generate an ICMP error,
icmp_route_lookup() performs a reverse-path relookup. For non-local
destinations, it performs a decoy lookup to find the expected egress
interface (rt2->dst.dev) before validating the path with ip_route_input().
Currently, the decoy flow structure (fl4_2) only sets .daddr = fl4_dec.saddr,
leaving .saddr, .flowi4_dscp, .flowi4_proto, .flowi4_mark, .flowi4_oif,
.fl4_sport, .fl4_dport, and .flowi4_uid zeroed out.
When policy routing rules (such as ip rule add from $SRC lookup 100, or
dscp/fwmark/ipproto/port rules, or VRF bindings) are configured:
1. The decoy lookup fails to match the policy rule because saddr and other
key flow selectors are missing in fl4_2.
2. It resolves a route using the default table instead, returning an incorrect
egress netdev.
3. Passing the wrong netdev to ip_route_input() causes strict reverse-path
filtering (rp_filter=1) to fail, logging false-positive "martian source"
warnings and causing the relookup to fail.
Fix this by initializing fl4_2 from fl4_dec and:
- Swapping source/destination IP addresses.
- Swapping L4 ports for transport protocols with ports (TCP, UDP, SCTP, DCCP)
so port-based policy routing matches correctly. Non-port protocols (such as
ICMP or GRE) leave the flowi_uli union fields intact to prevent corruption.
- Setting .flowi4_oif = l3mdev_master_ifindex(route_lookup_dev) to ensure
VRF routing tables are respected.
- Setting .flowi4_flags |= FLOWI_FLAG_ANYSRC to allow output route lookups
for non-local source IP addresses.
- Using __ip_route_output_key() instead of ip_route_output_key() for fl4_2
so that raw FIB routing is used without triggering spurious XFRM policy
lookups on the decoy flow (the actual XFRM lookup is performed later using
fl4_dec).
Fixes: 415b3334a2 ("icmp: Fix regression in nexthop resolution during replies.")
Reported-by: Muhammad Ziad <muhzi100@gmail.com>
Closes: https://lore.kernel.org/netdev/CAOAwikA60AYKdFr_UDLyja3oU4hqyAE7uFZWqum5uRdaQsgRYg@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260722104236.2938082-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Cc: stable@vger.kernel.org
Signed-off-by: Shihuang Liu <shlomojune6@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260722113919.7723-1-shlomojune6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initial PWM and PSC register writes in pca9532_configure() do not
check the return values of i2c_smbus_write_byte_data(). If the I2C
device is physically absent from the bus, the write fails with -ENXIO.
However, the driver ignores this error and allows probe() to complete
successfully.
This results in the registration of phantom LED class devices and
gpiochips backed by non-existent hardware. Subsequent GPIO reads from
these phantom chips return bogus values (due to -ENXIO being truncated
to an unsigned char in pca9532_gpio_get_value()), silently corrupting
hardware state tracking in userspace.
Propagate the I2C write failures back to probe() so the driver core
can gracefully abort binding and release devres-managed resources.
Fixes: e14fa82439 ("leds: Add pca9532 led driver")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715080747.1638097-1-chou.cosmo@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Introduce the "dpm_watchdog_enabled" module parameter to allow the DPM
watchdog to be enabled or disabled at boot time and runtime.
Additionally, introduce the CONFIG_DPM_WATCHDOG_ENABLED Kconfig option
to set the default value of the module parameter at compile time.
The primary motivation for this configurability resolves around Android
GKI (Generic Kernel Image). We want to enable CONFIG_DPM_WATCHDOG in
the GKI so the feature is available. However, because the GKI is shared
across many different devices, we don't want to inadvertently affect
devices that are unaware of this feature. This provides a way to
compile it in, but keep it disabled by default for those devices via the
kernel command line or module parameters.
To maintain backward compatibility, CONFIG_DPM_WATCHDOG_ENABLED relies
on `default y`. Previously, the DPM watchdog was always active if
CONFIG_DPM_WATCHDOG was set. Defaulting this new option to 'y' ensures
that the behavior remains unchanged for existing users and defconfigs
when they upgrade.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-3-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the module parameters defined in drivers/base/power/main.c
use the default prefix "main" (derived from the filename). The prefix
is too generic and non-descriptive.
Redefine MODULE_PARAM_PREFIX to "pm." to group the module
parameters under the namespace instead. This makes the parameters more
descriptive.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-2-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change the function's return type from 'int' to 'bool' and return the result
of memcmp() directly to simplify the code. While at it, cast ->start to
const u8 * to better match the expected type.
Also inline the verify_sha256_digest() check and remove the redundant
local 'ret' variable in purgatory().
No change in functionality expected.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://patch.msgid.link/20260723133634.161598-3-thorsten.blum@linux.dev
vfs_lookup_open() is a limited version of lookup_open() which is
exported for nfsd to use - to replace dentry_create().
It is limited in that no filename is given (thus no auditing) and no
LOOKUP_ flags are passed. A few "intent" LOOKUP flags are deduced from
the open flags.
If a non-regular file is found and appropriate error is returned and no
file is opened.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-4-neilb@ownmail.net
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
By moving this retry into lookup_open() we no longer need to pass around
the delegated_inode pointer.
Various variable assignments need to be moved out of the declaration
block so that they can be repeated after the "goto retry".
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-3-neilb@ownmail.net
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The mnt_want_write() call and the parent inode locking in
open_last_lookups() are only needed for lookup_open(). So we can move
them and all the got_write handling into lookup_open().
Note that we need to also check create_error when determining whether to
unlock shared or not, as O_CREAT can be cleared, but create_error is
only set of O_CREAT was set.
The fsnotify calls come too as they must be in the locked region.
Also use the existing dir_inode uniformly for dir->d_inode.
This is a step towards exporting an better "open/create" interface to nfsd.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-2-neilb@ownmail.net
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Replace snprintf() with sysfs_emit_at() in trans_table_show().
sysfs_emit_at() is preferred for formatting sysfs output because it
provides safer bounds checking.
Convert multiple PAGE_SIZE length checks to check the number of bytes
actually copied by sysfs_emit_at(), thus avoiding manual buffer size
accounting.
Consistently return -EFBIG when the transition table output exceeds the
sysfs buffer, including the header row.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260719132251.31936-3-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The MCTP serial receive state machine reads a frame length byte in
mctp_serial_push_header() case 2 and validates it upper-bound-only:
if (c > MCTP_SERIAL_FRAME_MTU) {
dev->rxstate = STATE_ERR;
} else {
dev->rxlen = c;
dev->rxpos = 0;
dev->rxstate = STATE_DATA;
...
}
A length of zero passes this check, so rxlen is set to 0 and the state
machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the
incoming byte is stored and rxpos incremented before the terminator is
tested:
dev->rxbuf[dev->rxpos] = c;
dev->rxpos++;
dev->rxstate = STATE_DATA;
if (dev->rxpos == dev->rxlen) {
dev->rxpos = 0;
dev->rxstate = STATE_TRAILER;
}
With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is
already 1 on the first data byte), so subsequent bytes are written past
the end of the fixed 74-byte rxbuf, which is the last member of the
netdev private area. Every following data byte is an attacker-controlled
1-byte out-of-bounds heap write, and the overflow continues until a
frame (0x7e) or escape byte resets the parser -- effectively unbounded.
Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line
discipline and bring the resulting mctpserialN netdev up, after which
the bytes arrive via the tty receive path.
Route a zero-length frame straight to STATE_TRAILER instead of
STATE_DATA. The trailer/framing bytes are still consumed, and the frame
resolves to a zero-length skb that the MCTP core rejects; the parser
never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can
no longer occur.
KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this
change):
UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370
index 74 is out of range for type 'u8 [74]'
BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf
Write of size 1 at addr ... by task kworker/u16:0
mctp_serial_tty_receive_buf
tty_ldisc_receive_buf
flush_to_ldisc
Allocated by task 152:
alloc_netdev_mqs
mctp_serial_open
v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so
the trailer/framing bytes are still consumed (Jeremy Kerr).
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: a0c2ccd9b5 ("mctp: Add MCTP-over-serial transport binding")
Cc: stable@vger.kernel.org
Suggested-by: Jeremy Kerr <jk@codeconstruct.com.au>
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715082021.46315-1-doruk@0sec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When MCAM entries are allocated for a VF netdev via the devlink
mcam_count parameter, only OTX2_FLAG_NTUPLE_SUPPORT was set. That
enabled ethtool ntuple filters but not tc flower offload. Also set
OTX2_FLAG_TC_FLOWER_SUPPORT when entries are successfully allocated.
Fixes: 2da4894327 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715052007.2099851-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Delay allocating and linking the next swap_map_page until another image
page actually needs to be recorded.
The previous code linked and wrote a new swap map page as soon as the
current one became full. When the image size was an exact multiple of
MAP_PAGE_ENTRIES, that left an empty final map page that existed only to
terminate the on-disk chain.
Instead, keep a full map page in memory and only allocate the next map page
when the next image page arrives. This preserves the resume chain while
avoiding an unnecessary swap slot allocation and write for the empty
swap map page.
Signed-off-by: Haesung Kim <mattkim513@gmail.com>
Link: https://patch.msgid.link/20260714072627.3165744-1-mattkim513@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When memory_bm_create() succeeds for copy_bm but fails for zero_bm,
the function returns without freeing the resources allocated for
copy_bm. This results in a memory leak that includes radix tree nodes,
zone structures, and page lists.
Fix this by calling memory_bm_free() to release copy_bm's resources
before returning the error code when zero_bm allocation fails.
Fixes: 005e8dddd4 ("PM: hibernate: don't store zero pages in the image file")
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Link: https://patch.msgid.link/20260711145246.8625-1-malayarout91@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update the NIX_GET_HW_INFO mailbox message to return the VWQE timer
delay, which is used for vector packet wait time calculation.
Repurpose the existing rsvs16 reserved field in struct nix_hw_info
to vwqe_delay and populate it by reading the NIX_AF_VWQE_TIMER
register (applicable for non-OTX2 silicon).
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715073112.622662-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case iproute2 is older than version 5.14.0, released ~Sept 1, 2021,
the End.DT46 support is not available and the host_vpn_tests test contained
in the srv6_end_dt46_l3vpn_test.sh file is failing in some kernel backports.
This is the result of those tests:
################################################################################
TEST SECTION: SRv6 VPN connectivity test among hosts in the same tenant
################################################################################
TEST: IPv6 Hosts connectivity: hs-t100-1 -> hs-t100-2 (tenant 100) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t100-1 -> hs-t100-2 (tenant 100) [ FAIL ]
TEST: IPv6 Hosts connectivity: hs-t100-2 -> hs-t100-1 (tenant 100) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t100-2 -> hs-t100-1 (tenant 100) [ FAIL ]
TEST: IPv6 Hosts connectivity: hs-t200-3 -> hs-t200-4 (tenant 200) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t200-3 -> hs-t200-4 (tenant 200) [ FAIL ]
TEST: IPv6 Hosts connectivity: hs-t200-4 -> hs-t200-3 (tenant 200) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t200-4 -> hs-t200-3 (tenant 200) [ FAIL ]
To amend this, check the current running iproute2 supports the required
feature and, if not, just skip the entire test to avoid a failure.
Signed-off-by: Alessio Faina <alessio.faina@canonical.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260715122859.36177-1-alessio.faina@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are still a handful of ancient mips/armv5/sh boards that use the
gpio_led:gpio member to pass an old-style gpio number, but all modern
users have been converted to gpio descriptors.
While the CONFIG_GPIOLIB_LEGACY option that guards devm_gpio_request_one()
and related helpers is currently turned on in all kernel builds,
the plan is to only enable it on the few platforms that actually
pass gpio numbers in any platform_data.
Split out the legacy portion of the platform_data handling into a custom
helper function that is guarded with in #ifdef block, to allow the
the leds-gpio driver to compile cleanly when CONFIG_GPIOLIB_LEGACY
gets turned off. Once the last user is converted, this function can
be removed.
Link: https://lore.kernel.org/all/e9252384-a55c-4a91-9c61-06e05a0b2ce4@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://patch.msgid.link/20260710211854.1371746-4-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add an optional mlx5 driver-namespace UMEM attribute on SRQ create so
userspace can supply the doorbell record umem explicitly, symmetric to
the CQ and QP sides. Resolve it inside mlx5_ib_db_map_user() and use it
as a private DBR page when present; otherwise take the existing UHW
share-or-pin path that preserves per-page DBR sharing across CQ/QP/SRQ
in the same process.
Add mlx5's first UVERBS_OBJECT_SRQ UAPI definition chain to attach the
new attr.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-4-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use the per-attribute UMEM helper to pin the SRQ buffer umem on demand.
ib_umem_get_attr_or_va() resolves the new CREATE_SRQ_BUF_UMEM attribute
when present and otherwise falls back to the existing UHW ucmd->buf_addr
VA, preserving the legacy behavior.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-3-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Apply the per-attribute UMEM model to the SRQ create method. Add an
optional UMEM attribute that backs the SRQ WQE buffer, so userspace can
supply it as either a VA or a dma-buf through a single descriptor,
consistent with the CQ and QP create methods.
mlx5 is the only driver that pins an SRQ WQE buffer via umem; it maps a
single ucmd->buf_addr region through this attribute. No other driver
implements a user SRQ buffer, so none of them use the attribute.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-2-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pass the pinctrl error pointer directly to %pe to print the
symbolic error name.
Detected by Coccinelle. Tested by compiling.
Signed-off-by: Ninad Naik <ninadnaik07@gmail.com>
Link: https://patch.msgid.link/20260713200732.2470666-1-ninadnaik07@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Implement returning to userspace applications PDNs of created PDs.
The PDN is used by applications that build work requests outside of the
rdma-core code base. The PDN is used to build work requests that require
mentioning the PD. The HW still ensures PD isolation using PDN attached
to MRs and WRs, therefore the PDN mentioned in the work request must match
the PDN of the used work queue. The work requests can fit only 16 bit PDNs.
Allow users to request short PDNs which are 16 bits.
The capability to request short PDN and get PDN is encoded in the response
of alloc user context IOCTL.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/20260717200839.495327-1-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
