Enable runtime PM support for i.MX95 PCIe Root Complex to allow dynamic
power management when the PCIe link is idle.
The i.MX95 PCIe controller supports entering D3hot state when PCIe
devices are not actively in use. This implementation uses
pm_runtime_no_callbacks() to leverage the PCI core's generic runtime PM
handling. The PCI core automatically manages D-state transitions based
on the runtime PM state of connected endpoint devices.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260715073024.1377228-1-hongxing.zhu@oss.nxp.com
The PCIe PHY node references mipi_pcie_analog_dphy via its phys property.
Enable this analog PHY node to make PCIe functionally viable.
Fixes: 9715b01da6 ("arm64: dts: meson-axg-s400: enable PCIe M.2 Key E slots")
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260624135650.727077-5-jerrysteve1101@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Set the pcie_phy node to "disabled" as it is not used on some boards
and should be enabled per-board when necessary.
This change suppresses the deferred probe warning:
platform ff644000.phy: deferred probe pending: (reason unknown)
The meson-axg dtsi now disables pcie_phy by default, so enable it
for the s400 board to support PCIe functionality.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260624135650.727077-4-jerrysteve1101@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The nand_all_pins pinctrl node was missing the nand_rb0 (ready/busy)
pin description, which is required for NAND controller operation.
Add it to the pinmux list.
Fixes: be18d53c32 ("arm64: dts: amlogic: meson-axg: pinctrl node for NAND")
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260624135650.727077-3-jerrysteve1101@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
nand_rb0 and emmc_ds share one pad. Before enabling nand_rb0 for nfc,
disable nfc nodes by default to resolve pinctrl resource contention.
No mainline AXG boards enable nfc currently thus no extra DTS adjustments
are needed.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260624135650.727077-2-jerrysteve1101@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Correct spaces or mix of tabs+spaces into proper tab-indented lines and
remove other whitespace violations. No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260706093508.273968-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The state variables (states, initial_state, final_states) only capture the
states' names and have less information than their Lark-based counterparts.
Switch to use the new state variables and delete these old ones.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/c1e214623f83a6d8a97b6ffa54ce8ec106b11c65.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Switch __create_matrix() to use the transitions parsed by Lark to avoid all
the raw text parsing.
Also stop parsing constraints in __create_matrix(), that is not used
anymore.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/36e76b64049b7fef1cf5c2855fea310c0452ee38.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Hybrid automata monitors's clock variables have been changed to have
only a single representation. Now there is no need to generate code to
convert between the two representations.
Delete __fill_convert_inv_guard_func() and its associates. Update
__start_to_invariant_check() to how invariants now work.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/0d2a8e4bf90a9ed959289ddd2190b1152e4bbadf.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Hybrid automata monitors's clock variables have two different
representations:
- The invariant representation, which is the timestamp when the invariant
expires
- The guard representation, which is the timestamp when the clock is last
reset
This dual representation makes the logic quite difficult to follow (well,
at least for me). It also complicates the monitors and the generation tool,
as it requires conversion back and forth between the representation.
Simplify by using the clock variables for a single purpose: storing the
time stamp since the clock is last reset.
This also allows simplifying rvgen, which will be done in a follow-up
commit.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/c0f600dcbf3d8b487c944406851a39146f4d91fa.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
The DOT parsing scripts directly parse the raw text and they are quite
fragile. If the input dot files' formats are slightly changed (for
instance, by breaking long some lines which is allowed by the DOT
language), the scripts would fail.
Prepare to move away from the raw text processing, implement parsers based
on Lark which parse states, transitions and constraints.
The parse results are not used yet. The existing scripts will be converted
one by one to them, and the raw text processing will eventually be removed.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/3ef60fdb03154abb9d9718ea106484213e1a4598.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
The DOT parsing scripts directly parse the raw text and they are quite
fragile. If the input dot files' formats are slightly changed (for
instance, by breaking long some lines which is allowed by the DOT language
defined by graphviz), the scripts would fail.
To make the scripts robust, the parser should be implemented based on the
dot language specification, not based on how the existing dot files look.
As a first step, use Lark to implement a Parser based on the graphviz dot
language specification. The resulting parse tree is not used yet, but the
existing scripts will be converted one by one to use this new parse tree in
the follow-up commits.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/f816bce4cc7c48d0b6b6a28a7029459df69d6a71.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
The LTL parser is built using Ply. However, Ply is no longer
maintained [1].
Switch to use Lark instead. In addition to being actively maintained, Lark
also offers additional features (namely, automatically creating the
abstract syntax tree) which make the parser simpler.
Link: 9d7c40099e [1]
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/73d149221d96090342c7de408d032573de9cb6c4.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
If the bootloader has already powered up the PCIe PHY, performing a
full reset and waiting for the PHY to come up again adds unnecessary
delay during boot.
Extend the existing skip_init handling by introducing a skip_reset
condition. When skip_init is active and the PHY status indicates that
the PHY is already operational, skip asserting and deasserting the
no-csr reset while still enabling the required resources during
power-on.
This allows reusing the bootloader-initialized PHY state and avoids
redundant PHY reinitialization and PCIe link retraining, which can
add hundred's of milliseconds of delay.
This relies on the assumption that when skip_init is enabled and the
PHY is reported as up, the bootloader has already configured the PHY
correctly and the link is in a usable state.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-link_retain-v3-1-81a9d187bb61@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the MIPI DSI PHY found in the MediaTek MT8196 SoC
and its variants.
This PHY has a different register layout and provides support for
more hardware features compared to the previous generation.
This initial driver only adds support for basic functionality that
is necessary to drive MIPI DSI displays as a D-PHY.
Feature additions like lane-swap, DPHY/CPHY switching, dual-port,
and others, may be done in the future.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260713103805.23030-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the MediaTek Kompanio Ultra (MT8196) SoC: this
chip features a DSI PHY that is similar to the one found in the
MT8183 SoC, but is a new (incremental) revision with a different
register layout.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260713103805.23030-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 0b31f29755 ("phy: rockchip: naneng-combphy: Consolidate SSC
configuration") moved the SSC spread spectrum direction setup into the
new rk_combphy_common_cfg_ssc() helper. That helper returns early when
the 'rockchip,enable-ssc' property is absent, whereas the equivalent
RK3568_PHYREG32 direction writes previously ran unconditionally in the
per-type switch statements, independent of whether SSC modulation was
actually enabled.
As no in-tree board sets 'rockchip,enable-ssc', this changed the behavior
at least for USB3 on RK3576, which now fails to bring up the link.
USB 2.0 still enumerates, but USB 3.0 does not, and the SuperSpeed root
port floods the log every second with:
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
This was observed on two different RK3576 devices with a CoreChips SL6341
USB 2.0/3.0 hub connected to the USB DRD controller running in host mode.
Perform the SSC direction writes for PCIe/USB3 (and SATA) before the
enable_ssc check so that they always run, as they did before the
consolidation.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/CAKTNdwH_ZMQa-97h+tqdsWqXKtorkFF9wHAMn60-8ZGKuze_Mg@mail.gmail.com/
Fixes: 0b31f29755 ("phy: rockchip: naneng-combphy: Consolidate SSC configuration")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Liu Changjie <liucj1228@outlook.com>
Link: https://patch.msgid.link/20260714-naneng-ssc-fix-v1-1-1c40a58061ae@flipper.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The comb PHY on K3 requires to configure a syscon device for the
right mux configuration. And it requires calibration before any
usage.
Add USB3/PCIe comb PHY driver for Spacemit K3.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://patch.msgid.link/20260703021024.495433-3-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USB3/PCIe comb PHY on the K3 is a complex PHY group that
can provide multiple phy for both PCIe and USB controller.
Its mux configuration is controlled by the APMU syscon device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260703021024.495433-2-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The init call currently returns success irrespective of any failures
during repeater init or clock enablement. Return appropriate error value
in the init call failure path.
Fixes: 9c8504861c ("phy: qcom: Add M31 based eUSB2 PHY driver")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20260718-m31-eusb2-fix-v1-1-8588a1b94d76@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The i2c subsystem currently blocks during adapter deregistration whenever
there are consumers holding a reference.
Switch to using of_get_i2c_adapter_by_node() which also takes a reference
to the adapter module so that an attempt to unload the module while in use
fails gracefully instead of blocking uninterruptibly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260716132532.1565340-1-johan@kernel.org
stf_dphy_probe() enables runtime PM before registering the PHY provider.
If devm_of_phy_provider_register() fails, probe returns with runtime PM
still enabled.
The driver also has no remove callback, so runtime PM is left enabled
on driver unbind after a successful probe.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically
on later probe failures and on driver unbind.
Fixes: f8aa660841 ("phy: starfive: Add mipi dphy rx support")
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://patch.msgid.link/20260718090054.444513-3-pengcan@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
stf_dphy_probe() enables runtime PM before getting the clock and
reset controls, creating the PHY and registering the PHY provider. If
any of those steps fails, probe returns with runtime PM still enabled.
The driver also has no remove callback, so runtime PM is left enabled
on driver unbind after a successful probe.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically
on later probe failures and on driver unbind.
Fixes: d3ab795533 ("phy: starfive: Add mipi dphy tx support")
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://patch.msgid.link/20260718090054.444513-2-pengcan@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the QMP PCIe PHY support for the Gen3 x2 and Gen4 x1 PHY found on
the Hawi platform.
Signed-off-by: Matthew Leung <matthew.leung@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260707-hawi-phy-pcie-v4-4-8d9cc6324947@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the compatibles for the Gen3 x2 and Gen4 x1 QMP PCIe PHYs found
on the Hawi platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Matthew Leung <matthew.leung@oss.qualcomm.com>
Link: https://patch.msgid.link/20260707-hawi-phy-pcie-v4-1-8d9cc6324947@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Turns out some panels allow only AUX based backlight
by just setting the DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP and
not setting the DP_EDP_BACKLIGHT_AUX_ENABLE_CAP.
If we make DP_EDP_BACKLIGHT_AUX_ENABLE_CAP a necessity for AUX
based DPCD backlight these panels loose the ability to manipulate
backlight via AUX, especially ones with no PWM controller.
Remove this check from function so that panels who do not advertise
DP_EDP_BACKLIGHT_AUX_ENABLE_CAP but advertise
DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP are able to manipulate
backlight again.
Fixes: ed8be780bd ("drm/i915/backlight: Fix VESA backlight possible check condition")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16507
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260716030959.436430-1-suraj.kandpal@intel.com
(cherry picked from commit 7d594b24c9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ESP-in-TCP receives records through the TCP strparser. handle_esp()
restores skb->dev from the saved skb_iif before passing the packet into
the XFRM input path.
Queued TCP data can be processed after the original ingress device has
been removed, for example during veth or net namespace teardown. In that
case dev_get_by_index_rcu() returns NULL. The XFRM IPv4 and IPv6 input
paths both expect skb->dev to be valid while building the route lookup,
so queued ESP-in-TCP data can dereference a NULL device.
Drop the packet if the saved ingress device can no longer be resolved.
Such a packet can no longer be routed through the normal XFRM receive
path, and this preserves the existing behaviour for packets whose ingress
device still exists.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Assisted-by: Codex:gpt-5.4
Reviewed-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed.
Cc: stable@vger.kernel.org
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Reported-by: zdi-disclosures@trendmicro.com
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The software node fw_devlink support already has its own kunit suite, but
that verifies the fwnode links in isolation. Add GPIO tests that prove
the ordering works in a real-life use-case: a GPIO consumer that
references its provider via a software node.
The first suite registers the provider's software node, adds the consumer
device first and checks that fw_devlink defers its probe until the
provider has been added and bound. The second covers the fallback:
with the provider's software node not yet registered no supplier link is
created, so the consumer probes, devm_gpiod_get() returns -EPROBE_DEFER
and the consumer only binds once the provider shows up.
While at it: the existing gpio_unbind_with_consumers() test keeps the
consumer bound while the provider goes away and then operates the orphaned
descriptor. With software nodes now being covered by fw_devlink that would
instead force-unbind the consumer along with the provider, so opt it out
by setting FWNODE_FLAG_LINKS_ADDED.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <david@davidgow.net>
Link: https://patch.msgid.link/20260720-swnode-fw-devlink-v5-1-ec250ae6af91@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
EXPORT_SYMBOL_GPL(msi_domain_free_irqs_all) was mistakenly placed after
msi_domain_free_irqs_range() instead of after its intended function
msi_domain_free_irqs_all().
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260717143157.1718-1-lirongqing@baidu.com
xfs_rtginode_ensure() treats every xfs_rtginode_load() error other than
-ENOENT as success. This can leave the realtime group inode unset after an
I/O, allocation, or corruption error. Growfs then continues as though the
inode had been loaded.
Only -ENOENT means that the inode needs to be created. Return all other
errors to the growfs caller.
Fixes: ae897e0bed ("xfs: support creating per-RTG files in growfs")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
On systems where the USCS ACPI method is absent, acpi_evalf() returns
AE_NOT_FOUND which maps to -EIO. This caused tpacpi_usbc_security_init()
to propagate the error and thinkpad_acpi failed to probe entirely on
unsupported platforms.
Fix this by checking for USCS method presence with acpi_has_method() before
attempting to call it, returning -ENODEV immediately if absent.
This follows the same pattern used by other subdrivers in thinkpad_acpi.c.
Fixes: 67e8d1e9cacd ("platform/x86: thinkpad_acpi: Add USB-C Security (USCS) support")
Reported-by: Oliver Lin <oliver@liuxiaozhen.dev>
Closes: https://lore.kernel.org/platform-driver-x86/239c8162-e1e6-4b49-8292-35547c5a525c@liuxiaozhen.dev/
Tested-by: Oliver Lin <oliver@liuxiaozhen.dev>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://patch.msgid.link/20260715010205.514132-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
snd_timer_close_locked() drains the closing instance's own in-flight
callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a
master instance is closed, remove_slave_links() clears each slave's
->timer; the slave's own close then reads timer == NULL and takes the
branch that skips the drain entirely (snd_timer_stop_slave() also no-ops
on a NULL timer). So a slave whose callback is still running when the
master is closed is freed underneath the live callback, leading to
use-after-free.
Drain the slaves too before remove_slave_links() severs them.
snd_timer_stop() has already taken this instance off the active list, so
no new slave callback can be queued. Take the slaves off the ack list so
a pending one can't fire either, then wait for any that is already in
flight.
Fixes: 37745918e0 ("ALSA: timer: Introduce virtual userspace-driven timers")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/D26598EB-DBF7-4D76-9F71-8E4BD59822D4@doyensec.com
The userspace-driven timer (utimer) TRIGGER ioctl calls
snd_timer_interrupt() directly with no serialization, so two threads
triggering the same utimer can run snd_timer_interrupt() on one
snd_timer concurrently.
snd_timer_process_callbacks() drops timer->lock around each instance
callback and marks the in-flight callback with the single
SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that
bit to drain an in-flight callback before freeing the instance. The bit
cannot represent two concurrent callbacks: when a second interrupt
re-queues an instance whose callback is still running, both run at once,
the first to finish clears the bit, and the close-path drain then frees
the instance (and its callback_data) while the other callback is still
live - a use-after-free reachable by any user able to open
/dev/snd/timer, both via a user timer instance and via a sequencer queue
timer bound to the utimer.
snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so
a concurrent interrupt already observes it under the lock. Skip
re-queuing an instance (and its slaves) to the ack/sack list while its
callback is in flight; the accumulated pticks are delivered on the next
tick, so no event is lost.
Fixes: 37745918e0 ("ALSA: timer: Introduce virtual userspace-driven timers")
Cc: stable@vger.kernel.org
Suggested-by: Takashi Iwai <tiwai@suse.de>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/6F9B6501-8E65-4265-B02C-7EFB240D1664@doyensec.com
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaleyHAAKCRBFlHeO1qrK
LkGKAP9isPMqr2WJTbS8I65WDErXk3z8741AGELlUAkn3M3sUwD/X9tCZcFdTy8e
u7EyxBvnXb9TemwJFJbQmCZju/6yngg=
=e78c
-----END PGP SIGNATURE-----
Merge tag 'swnode-7.3-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core into gpio/for-next
software node: provide support for fw_devlink
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
Two unrelated things go by "cgroup" in the cid form. Sub-schedulers attach
to cgroups, and the cgroup_*() ops deliver cpu controller events. While the
ops names suggest cgroup2 hierarchy, they actually operate on the cpu
controller.
Rename them to cpuctl_* in struct sched_ext_ops_cid, which has no users
outside scx_qmap yet. The cpu form is deployed ABI and keeps the old names.
The layout is unchanged and the kernel keeps calling through the cpu-form
union view.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
SCX_OPS_OPEN() clears compat-gated ops fields which the running kernel
lacks. The clears dereference cpu-form member names and compile for
cid-form skeletons only because both ops structs currently name their
cgroup ops identically, which an upcoming rename will end. No load-time
fix-up can apply to a cid-form scheduler anyway as the cid form postdates
every compat-gated op.
Factor the skeleton open path out of SCX_OPS_OPEN() and add
SCX_OPS_CID_OPEN() which uses only that shared part. Switch scx_qmap, the
only cid-form scheduler, over.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add -J init-fail which makes ops.init_task() fail with -ENOMEM for tasks
whose comm starts with "qmfail", and -J cgrp-init-fail which does the same
in ops.cgroup_init() for cgroups named "qmfail*".
The former exercises the migration veto path: the cgroup.procs write must
fail with the injected errno while the destination sched stays up and the
task stays put. The latter exercises the ownership-return failure path: a
parent failing to re-init a returned cgroup leaves it unowned, and moves and
set_* ops against it must be skipped instead of dereferencing the missing
owner. Matching on "qmfail" names keeps the injecting scheduler's own enable
unaffected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
With the set_* ops delivered to the parent's sched, a parent qmap instance
now receives cgroup_set_weight for its child subs' attach points. Update
the matching sub_sched_ctx weight and redistribute() in-kernel, and drop
the userspace feed_weights() polling. This exercises the knob routing end
to end.
The self weight is fixed at 100: a cgroup's weight is its parent's knob and
not the scheduler's own business. This drops the self-weight polling and the
repartition PROG_RUN poke with it.
sub_attach seeds the slot with the cgroup's current weight, read through
bpf_cgroup_from_id(), so a weight set before the sub attaches is picked up.
A write racing the attach can still be lost until the next value-changing
cpu.weight write. Acceptable for a demo.
While at it, add a traced ops.cgroup_move() so tests can observe move
delivery.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Sub-schedulers don't get cgroups yet: every task_group is inited on the root
sched and the routing added by the previous patches always resolves to it.
Add the handover: an enabling sub-scheduler takes over the cgroups in its
subtree and a disabling one returns them to its parent.
scx_cgroup_claim_subtree() runs while the sub enables, after the subtree's
cgrp->scx_sched's are set and before any task is claimed. It inits each
subtree task_group on the sub, exits it from the parent and updates
tg->scx.sched. A failed ops.cgroup_init() unwinds the sub-side inits and
aborts the enable with the parent untouched.
Disabling reverses it with scx_cgroup_return_subtree(): exit each cgroup
from the sub, then re-init it on the parent with the current tg->scx.*
values, resyncing weight and bandwidth changes made while the sub had it.
When a re-init fails, the parent is failed and the remaining task_groups
still transfer uninited and get no cgroup ops - the same punting done for
tasks. The dying parent's own disable moves them onward.
The handover walks include dying but not yet offlined task_groups, the same
as root's bulk walks: a removed cgroup keeps hosting scheduling events until
its dying tasks finish their final context switches, and its
ops.cgroup_exit() must follow the last of them. tg on/offlining is excluded
through cgroup_lock(), so either ordering against an rmdir of a subtree
cgroup delivers balanced init/exit pairs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
