The UDC pointer is set on successful probe and will never be NULL when
the driver is later unbound so drop the misleading sanity check (and
confused error message).
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260702141536.90887-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A change replacing custom printk() macros with dev_printk() incorrectly
used the gadget struct device instead of the controller struct device
(including for messages printed before the gadget device name has been
initialised).
Switch to using the controller platform device with dev_printk() so that
the controller device and driver names are included in log messages as
expected.
Fixes: 6025f20f16 ("usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}")
Cc: stable <stable@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260702141536.90887-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget device name is set by UDC core when registering the gadget
and must not be set before to avoid leaking the name in intermediate
error paths (e.g. when detecting an older chip revision).
Fixes: 12ad0fcaf2 ("usb: gadget: amd5536udc: let udc-core manage gadget->dev")
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260702141536.90887-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget device name is set by UDC core when registering the gadget
and must not be set before to avoid leaking the name in intermediate
error paths (e.g. on dma pool creation failure).
Fixes: eab35c4e6d ("usb: gadget: fsl_udc_core: let udc-core manage gadget->dev")
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260702141536.90887-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VIA VL805/806 xHCI controller advertises AC64, but fails to handle
DMA addresses at or above 0x1000000000. On systems with large amounts of
RAM, this can cause USB device failures when the controller is given DMA
addresses beyond its usable address width.
Do not use XHCI_NO_64BIT_SUPPORT for this controller. That quirk clears
the cached AC64 capability and limits DMA to 32 bits, causing unnecessary
bouncing for addresses between 4GiB and 64GiB and hiding the controller's
real AC64 capability from code that may need to distinguish register
access width from usable DMA address width.
Track the usable DMA address width separately from the AC64 capability.
Initialize the generic xhci->dma_mask_bits field to 64 and let PCI quirks
reduce it for controllers with narrower DMA support. Set VIA VL805/806 to
36 bits so the DMA API only hands it addresses in the range it can handle
while keeping HCCPARAMS1.AC64 visible.
Cc: stable <stable@kernel.org>
Signed-off-by: Xincheng Zhang <zhangxincheng@ultrarisc.com>
Link: https://patch.msgid.link/20260630-xhci-via-dma-fix-v3-1-690dcb8cf75a@ultrarisc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uvc_send_response() builds the UVC control response from a user-supplied
struct uvc_request_data:
req->length = min_t(unsigned int, uvc->event_length, data->length);
...
memcpy(req->buf, data->data, req->length);
req->length is clamped to uvc->event_length, which is taken from the
host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to
data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is
only checked for being negative. The source buffer data->data is only
60 bytes, so a response with uvc->event_length and data->length both
greater than 60 makes memcpy() read past the end of data->data.
Clamp req->length to sizeof(data->data) as well.
Fixes: a5eaaa1f33 ("usb: gadget: uvc: use capped length value")
Cc: stable <stable@kernel.org>
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260629195004.148405-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The f_tcm set_alt() path defers endpoint setup to a work item and
completes the delayed status response from process context. The delayed
work uses f_tcm private state and may complete the setup request after
disconnect or function teardown has already moved on.
Cancel and drain the delayed set_alt work when the function is unbound or
freed. For disable paths, which are reached under the composite device
lock, use a small state machine and a non-sleeping cancellation path
instead of cancel_work_sync(). If the work is already running, mark it
cancelled and let the worker own the cleanup; otherwise tcm_disable() can
cancel the queued work and clean up immediately.
Also serialize the final delayed-status completion with the cancellation
check while holding the composite device lock. This prevents a disconnect
from clearing delayed_status while the worker is about to complete the
control request.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? tcm_delayed_set_alt+0x6c/0xef0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? tcm_delayed_set_alt+0x6c/0xef0
kasan_report+0xe0/0x110
? tcm_delayed_set_alt+0x6c/0xef0
tcm_delayed_set_alt+0x6c/0xef0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? process_one_work+0x4cb/0xb90
? rcu_is_watching+0x20/0x50
? tcm_delayed_set_alt+0x9/0xef0
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 544:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
tcm_alloc+0x68/0x180
usb_get_function+0x36/0x60
config_usb_cfg_link+0x125/0x1b0
configfs_symlink+0x322/0x890
vfs_symlink+0xc2/0x270
filename_symlinkat+0x295/0x2f0
__x64_sys_symlinkat+0x62/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 661:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x2f9/0x530
config_usb_cfg_unlink+0x173/0x1e0
configfs_unlink+0x1fa/0x340
vfs_unlink+0x15c/0x510
filename_unlinkat+0x2ba/0x450
__x64_sys_unlinkat+0x63/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260627104153.3822495-1-zzzccc427@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Dan Carpenter points out, my recent change makes subtle
changes to the error handling that were not intended.
Move the warning print up so it does not get skipped in
case of an error, but handle -EPROBE_DEFER properly now.
Change the devm_gpiod_get() to the _optional variant, which
is in line with the intended behavior and the DT binding,
though this did not work previously.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/linux-usb/ag6-xhfFjb5NpXQz@stanley.mountain/
Fixes: 25bd55f460 ("usb: udc: pxa: remove unused platform_data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260526104810.3906090-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the staging fixes in here, and it resolves a merge conflict in:
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices during
suspend to preserve wakeup capability of the devices and also not to
power on the devices in the init path.
This allows controller power-off to be skipped when some devices (e.g.
M.2 Key E cards without auxiliary power) need to support PCIe L2 link
state and wake-up mechanisms.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260713023435.235765-3-sherry.sun@oss.nxp.com
Previously, pci_pwrctrl_create_devices() was placed in
imx_pcie_host_init(), which is the .init callback of dw_pcie_host_ops.
This callback is invoked not only during probe, but also during resume.
This caused pci_pwrctrl_create_devices() to be called multiple
times across suspend/resume cycles, which is unnecessary since the
pwrctrl devices only need to be created once.
Move pci_pwrctrl_create_devices() to imx_pcie_probe() so that it is only
called once during probe, similar to other regulator_get calls.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260713023435.235765-2-sherry.sun@oss.nxp.com
The scsi_debug driver internally defines lots of SCSI additional sense
codes (ASC) and additional sense code qualifiers (ASCQ). Move these
definitions to include/scsi/scsi_proto.h so that they can be reused
elsewhere in the SCSI and ATA code. This also makes the scsi_debug.c file
a little smaller.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
ks_sa_rng_probe() enables runtime PM and resumes the device before
registering the hwrng. If devm_hwrng_register() fails, probe returns
without dropping the runtime PM usage count or disabling runtime PM.
Unwind the runtime PM state on the registration failure path, matching
the cleanup done by remove().
Fixes: eb428ee0e3 ("hwrng: ks-sa - add hw_random driver")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the DT bindings for inline-crypto engine to require the UFS_PHY_GDSC
power-domain and iface clock on Qualcomm Hawi platform.
Fixes: d273b258d8 ("dt-bindings: crypto: qcom,inline-crypto-engine: Document Hawi ICE")
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Inline Crypto Engine found on Maili SoC is compatible with the common
baseline IP 'qcom,inline-crypto-engine' and requires the UFS_PHY_GDSC
power-domain and iface clock. Hence, document the compatible as such.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Maili SoC has the True Random Number Generator (TRNG) which is compatible
with the baseline IP "qcom,trng". Hence, document the compatible as such.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
allocated pages in _init_ext_path are never freed and sev_init_ex_buffer
is left pointing at the leaked memory in case of any failures during the
function..
Fix by adding an error path that frees the pages and clears
sev_init_ex_buffer. Make sure we only free the memory if the failure
happens before the conversion. Otherwise, we may end up trying to free
up converted pages in case of reclaim failure. rmp_mark_pages_firmware
failures should be rare enough to avoid more code complexity to track
down which pages were reclaimed/leaked vs which are not.
Fixes: 7364a6fbca ("crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Atish Patra <atishp@meta.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
__sev_platform_init_handle_init_ex_path() calls
rmp_mark_pages_firmware() with locked=false while the parent
function of init_ex_path already acquired the sev_cmd_mutex.
In the case of an RMPUPDATE failure for any page after the first, the cleanup
path would invoke reclaim pages which would result in a deadlock in
sev_do_cmd.
Pass locked=true to honor the lock status of the parent function.
Fixes: 7364a6fbca ("crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled")
Reported-by: Chris Mason <clm@meta.com>
Assisted-by: Claude:claude-opus-4-6
Fixes: 7364a6fbca ("crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Atish Patra <atishp@meta.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If phys_disk->in_reset is set, the function returns directly without
undoing the resources acquired for the command. Add the missing error
cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping
the SCSI command, and dropping the outstanding IOACCEL command count
before returning.
Fixes: c5dfd10641 ("scsi: hpsa: correct device resets")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260622160028.1240496-1-haoxiang_li2024@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below.
Cc: stable@vger.kernel.org
Fixes: 63de51327a ("scsi: elx: efct: Hardware I/O and SGL initialization")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://patch.msgid.link/20260611053037.63756-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path.
Fixes: f45ae6aac0 ("scsi: elx: efct: Unsolicited FC frame processing routines")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://patch.msgid.link/20260622075844.832871-1-haoxiang_li2024@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers.
Fixes: 6eb045e092 ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Link: https://patch.msgid.link/20260615174630.11492-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged.
Fixes: 4949314c72 ("target: Allow control CDBs with data > 1 page")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260610042245.35473-1-hexlabsecurity@proton.me
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor.
Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260611-b4-disp-9f20739e-v6-1-f6630e2aae44@proton.me
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 13 comment blocks in dds.h noting which sysfs attribute each
convenience macro creates are opened with the kernel-doc /** marker,
but they are not kernel-doc: there is no identifier to document.
Running kernel-doc on the file emits 103 warnings:
$ scripts/kernel-doc -none drivers/staging/iio/frequency/dds.h
Warning: drivers/staging/iio/frequency/dds.h:10 Cannot find
identifier on line:
* /sys/bus/iio/devices/.../out_altvoltageX_frequencyY
The header is not scanned during normal builds (build-time kernel-doc
checks cover .c files), so the warnings only show up when kernel-doc
is invoked on the file directly.
The comments have carried the /** marker since the file was introduced
in commit 4851d97d87 ("Staging: IIO: dds.h convenience macros"). The
attributes themselves are already documented in
drivers/staging/iio/Documentation/sysfs-bus-iio-dds, so demote the
comments to plain /* style rather than converting them into kernel-doc
for the macros. No functional change.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The board consists of a CLRV1126F core module and a DLRV1126 carrier
board. The core module contains the RV1126 SoC, eMMC and RK809 PMIC,
while the carrier board provides Ethernet, SD card, AP6212 WiFi and
Bluetooth, PCF8563 RTC, ADC keys, GPIO LEDs and audio connectors.
The board has been tested with Ethernet/NFS boot, eMMC, SD card, SDIO
WiFi enumeration, Bluetooth LE scanning, RTC, ADC keys, GPIO LEDs and
RK809 audio card registration.
Signed-off-by: Yanan He <grumpycat921013@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> #gmac and mdio nodes
Link: https://patch.msgid.link/20260706-rv1126-alientek-dlrv1126-v2-5-ff3176ca362b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The board consists of a DLRV1126 carrier board and a CLRV1126F core
module based on the Rockchip RV1126 SoC.
Signed-off-by: Yanan He <grumpycat921013@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260706-rv1126-alientek-dlrv1126-v2-2-ff3176ca362b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The TPM character devices expose a sequential command/response
interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE
enabled.
After a command leaves a response pending, pread(fd, buf, 16, 0x1400)
passes 0x1400 as *off to tpm_common_read(). The transfer length is
bounded by response_length, but the offset is used unchecked when
forming data_buffer + *off. A sufficiently large offset therefore causes
an out-of-bounds heap read through copy_to_user() and, if the copy
succeeds, an out-of-bounds zero-write through the following memset().
Positional I/O does not provide coherent semantics for this interface.
An arbitrary pread offset cannot represent how much of a response has
been consumed sequentially. The write callback always stores a command
at the start of data_buffer, while pwrite() does not update file->f_pos
and can leave the sequential read cursor stale.
Call nonseekable_open() from both open handlers. This removes
FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to
fail with -ESPIPE before reaching the TPM callbacks, and explicitly
marks the files non-seekable. Normal read() and write() continue to use
the existing sequential f_pos cursor, leaving the response state machine
unchanged.
Tested on Linux 6.12 with KASAN and a swtpm TPM2 device:
- sequential partial reads returned the complete response
- pread() and preadv() with offset 0x1400 returned -ESPIPE
- pwrite() and pwritev() with offset zero returned -ESPIPE
- the pending response remained intact after the rejected operations
- a subsequent normal command/response cycle completed normally
- no KASAN report was produced.
Fixes: 9488585b21 ("tpm: add support for partial reads")
Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jaewon Yang <yong010301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This board contains an EEPROM that holds the CPU serial number and
ethernet MAC. It is used by U-boot when configuring the device tree
for the Linux kernel.
Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Link: https://patch.msgid.link/20260703084645.7001-1-m95d+git@psihoexpert.ro
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Expose the IOC and board temperature sensors of LSI / Broadcom SAS HBAs
through hwmon. Readings come from MPI IO Unit Page 7 via the accessor added
in the preceding patch.
The same fields are exposed by Broadcom's userspace tooling through the
/dev/mpt[23]ctl ioctl path (typically root-only): IOCTemperature and
BoardTemperature in lsiutil; ROC and Controller in storcli. With this
driver, sensors(1) shows them unprivileged:
$ sensors mpt3sas-pci-0200
mpt3sas-pci-0200
Adapter: PCI adapter
IOC: +42.0°C
Each channel is gated independently by its *TemperatureUnits field through
is_visible(); cards that populate only one sensor expose only one input
file, and cards that populate neither do not register an hwmon device.
The hwmon code is gated directly on CONFIG_HWMON. IS_REACHABLE() is used
rather than IS_ENABLED() so that SCSI_MPT3SAS=y with HWMON=m still builds;
in that configuration, the sensors are not exposed (same pattern as i915
and xe).
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260630224922.2543096-3-sautier.louis@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add mpt3sas_config_get_iounit_pg7(), mirroring the existing iounit page
accessors. Used by the hwmon driver added in the following patch to read
the IOC and board temperatures.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260630224922.2543096-2-sautier.louis@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Here are some staging driver fixes for 7.2-rc3 for some reported bugs in
the vme_user and rtl8723bs drivers. These include:
- many rtl8723bs OOB fixes for when connecting to "bad" wifi hosts
- vme_user bugfixes to correctly validate some user-provided data
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNT5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynpAACgja2SsuFbsIOiofjEjyXZnjE55IcAoNkmr/yp
XkMNN2/oQHc1faGW47cm
=jtsV
-----END PGP SIGNATURE-----
Merge tag 'staging-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes for 7.2-rc3 for some reported bugs
in the vme_user and rtl8723bs drivers. These include:
- many rtl8723bs OOB fixes for when connecting to "bad" wifi hosts
- vme_user bugfixes to correctly validate some user-provided data
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
staging: rtl8723bs: fix OOB write in HT_caps_handler()
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
staging: vme_user: fix location monitor leak in tsi148 bridge
staging: vme_user: fix location monitor leak in fake bridge
staging: vme_user: bound slave read/write to the kern_buf size
staging: rtl8723bs: don't drop short TX frames in _rtw_pktfile_read()
Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for reported
problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNPWw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltzACdFC2/ouvc1ea1jGFBP1ZN4lKU6gAAn1ak5lRK
30pEMSmJwYteOj8AlpuE
=ZIWT
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
Here are some small tty/serial/vt fixes for 7.2-rc3 that resolve some
reported problems. Included in here are:
- vt spurious modifier issue that showed up in -rc1 (reported a bunch)
- 8250 driver bugfixes
- msm serial driver bugfix
- max310x serial driver bugfix
All of these have been in linux-next with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNRQg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymuIQCdGVJwWd6MdGl+vzAO5GhJA7ndewEAoIbyOkQ2
zriM/Mn6vzKP81QKvGRY
=Gmi1
-----END PGP SIGNATURE-----
Merge tag 'tty-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial/vt fixes for 7.2-rc3 that resolve some
reported problems. Included in here are:
- vt spurious modifier issue that showed up in -rc1 (reported a
bunch)
- 8250 driver bugfixes
- msm serial driver bugfix
- max310x serial driver bugfix
All of these have been in linux-next with no reported issues"
* tag 'tty-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Ignore flow control on suspend/resume with no_console_suspend
serial: 8250_mid: Disable DMA for selected platforms
serial: 8250_omap: clear rx_running on zero-length DMA completes
vt: fix spurious modifier in CSI/cursor key sequences
serial: msm: Disable DMA for kernel console UART
serial: max310x: implement gpio_chip::get_direction()
Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNSkw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynUlACgtUhZOR/MsYMcNbKJe9vk0iG35+AAnjrhznd4
OJqmb+1vVQ7xDm2fq+gz
=Ky4T
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues"
* tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: core: ratelimit cabling message
usb: misc: usbio: fix disconnect UAF in client teardown
Revert "usb: typec: mux: avoid duplicated mux switches"
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
usb: ucsi: huawei_gaokun: move typec_altmode off stack
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
usb: typec: tcpm: Fix VDM type for Enter Mode commands
usb: typec: ucsi: cancel pending work on system suspend
usb: typec: class: drop PD lookup reference
usb: typec: ps883x: Fix DP+USB3 configuration
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
xhci: sideband: fix ring sg table pages leak
usb: gadget: udc: Fix use-after-free in gadget_match_driver
usb: dwc3: run gadget disconnect from sleepable suspend context
usb: sl811-hcd: disable controller wakeup on remove
usb: typec: anx7411: use devm_pm_runtime_enable()
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
USB: misc: uss720: unregister parport on probe failure
usb: gadget: function: rndis: add length check for header
usb: gadget: function: rndis: add length check to response query
...
- Fix missing array_index_nospec() call in diag310 memory topology code
to prevent speculative execution with a user controlled array index
- Fix get_align_mask() return type to match vm_unmapped_area_info
align_mask, avoiding possible truncation for future larger masks
- Remove empty zcrypt CEX2 files left over after CEX2 and CEX3 driver
removal
- Add build salt to the vDSO so it gets a unique build id, similar to
the kernel and modules
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmpT1poACgkQjYWKoQLX
FBgEkAf/f/qKKj7ojuIsHoPpgTun3csqbGJqOnLShYaX3itzN8wbT5m0JGbKAKfv
BMpu5LSC5auGF6fvRhfJM/RbSX2LgEOMBtjx9kSAFFbNtkzu5urzZ1QFQyJ+DZq+
0Ny8E1ozB5dlizqqIIzijyAXbMt5vDrlaPKUh+LJMlkA0OY9NUt+KLah3soEexli
Oh18KMzrmik/SOr0qCuxrUa0Z0B5i2q8mp9AaS9/YaOHeuBspm4G47XKMHg4UMg8
yMb7ofaX4isgRYXrDsNUkLGe/KPkwntWnU7EVVJH/u4ZkjUlwEyIH0lhp6BnVlte
LSQ4742J4lxHa2Y+sQDxzFgaFr6reA==
=FOvG
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix missing array_index_nospec() call in diag310 memory topology code
to prevent speculative execution with a user controlled array index
- Fix get_align_mask() return type to match vm_unmapped_area_info
align_mask, avoiding possible truncation for future larger masks
- Remove empty zcrypt CEX2 files left over after CEX2 and CEX3 driver
removal
- Add build salt to the vDSO so it gets a unique build id, similar to
the kernel and modules
* tag 's390-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Add build salt to the vDSO
s390/zcrypt: Remove the empty file
s390/mm: Fix type mismatch in get_align_mask().
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
- Avoid a null pointer deference in machine_kexec_prepare() that the
IMA subsystem can trigger
- Bypass libc in part of the ptrace_v_not_enabled kselftest to avoid
noise from child atfork handlers that libc might run
- Include Kconfig support for UltraRISC SoCs, already referenced by
some device drivers; and enable it in our defconfig
- Fix the build of the rseq kselftest for RISC-V by borrowing a
technique from the KVM and S390 kselftests that includes
arch-specific header files from tools/arch/<arch>/include
- Fix some memory leaks in the RISC-V vector ptrace kselftests
- Clean up some DT bindings and hwprobe documentation
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmpRj9YACgkQx4+xDQu9
KktUEQ/8Cvup7jqUkHj3JBI/gjLLUyiOsa0q7KC3F2A+CznCFlrjwezGUZSeIiKq
lmVIeBFejOK+8VKNg+SeDTbfw10YlZOpUtBozJmRtFx17K0m5R6eGn6Qjy5IwMSI
wJmDylHtnLqrydYqESRt1iLDgETnZkmYdSlFDow2LKTa2g9BYPno+avB9uuzV2nj
/JCAC7kWSABRmROfNDBtZikT6Qcx1hGAxSQnkHmgvjYEInNggMefIfU7+/wgqksm
CEBCsoIZ3kqIVEkrGrYwlxoyj81wA8uOcg802xJs5ByffrdPc7xy43WZ9J41dKIb
EDXXbXH9tudhLmGfXDI8xt0gJz03L+t05pmYTaNN8o6/CWKQ7Dj5xvqfM1WllUDD
Q71Q6H0Smd7UmQkQ0/olyhG7yFEaewR+yJFvIEhISfQpIKUVWvVEVkEyJQdv66R4
ei2Oc2mUjQd+drCVD8d59whctUPMKDlg0JaesSE7rwNbx03NnOsLtg2JFHQxEVdn
GeUlKqAYLhTjPXrUvoWm3ebnU0DCvchKhY8So00aXWbdJnn2u9Qg81887czT0hQn
lsTLAt1n7/RCsuGo1zdw9lEMXmPJI9uX/HsyfatGYR9CVxj4M4tbVYjEz+wOFu+F
m7JKMnLFrvWF1+gRmmTXwcHCmi1qJnsqsILO4YvB+P/2vLs1FtU=
=P9QE
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The most notable change involves the rseq kselftest common Makefile
(as it is not RISC-V-specific). The basic approach in the patch
appears similar to one used in the KVM and S390 selftests (grep for
LINUX_TOOL_ARCH_INCLUDE and SUBARCH), and the rseq kselftests pass a
quick build test on x86 after this.
- Avoid a null pointer deference in machine_kexec_prepare() that the
IMA subsystem can trigger
- Bypass libc in part of the ptrace_v_not_enabled kselftest to avoid
noise from child atfork handlers that libc might run
- Include Kconfig support for UltraRISC SoCs, already referenced by
some device drivers; and enable it in our defconfig
- Fix the build of the rseq kselftest for RISC-V by borrowing a
technique from the KVM and S390 kselftests that includes
arch-specific header files from tools/arch/<arch>/include
- Fix some memory leaks in the RISC-V vector ptrace kselftests
- Clean up some DT bindings and hwprobe documentation"
* tag 'riscv-for-linus-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: ptrace: Fix memory leak of regset_data in vector tests
selftests/rseq: Fix a building error for riscv arch
riscv: defconfig: enable ARCH_ULTRARISC
riscv: add UltraRISC SoC family Kconfig support
riscv: hwprobe.rst: Document EXT_ZICFISS and EXT_ZICFILP
riscv: hwprobe.rst: Make indentation consistent
dt-bindings: riscv: sort multi-letter Z extensions alphanumerically
selftests: riscv: Bypass libc in inactive vector ptrace test
riscv: Prevent NULL pointer dereference in machine_kexec_prepare()
Remove the max_num_rtt field from ufs_hba_variant_ops as it has been
replaced by the get_hba_nortt() callback which provides more flexible
platform-specific RTT capability handling.
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260615055802.105479-4-ed.tsai@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement the get_hba_nortt callback to handle platform-specific RTT
capability differences:
- For legacy platforms and IP versions before MT6995 B0, the RTT
capability from host controller register is problematic, so limit it to
2 (MTK_MAX_NUM_RTT_LEGACY).
- For MT6995 B0 and later platforms, the issue is fixed and the value from
host controller capability register can be used directly.
This replaces the previous max_num_rtt field in ufs_hba_variant_ops with
dynamic platform-specific logic.
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260615055802.105479-3-ed.tsai@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The number of outstanding RTTs read from host controller capability
register is problematic on some platforms. Add a new vendor callback
get_hba_nortt() to allow platform vendors to override the default RTT
capability value with platform-specific handling.
This patch keeps max_num_rtt field for bisectability and will be removed in
a later patch once all platforms are migrated.
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260615055802.105479-2-ed.tsai@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Parse board-specific static TX Equalization settings from Device Tree for
each HS gear and store them in hba->tx_eq_params.
Parse txeq-preshoot-g[1-6] and txeq-deemphasis-g[1-6] as per-lane tuples:
<Host_Lane0 Device_Lane0>, [<Host_Lane1 Device_Lane1>].
For HS-G6, parse optional tx-precode-enable-g6 using the same per-lane
Host/Device tuple format. If provided, it must contain values for all
active lanes, and each value must be 0 or 1.
Introduce from_dt in struct ufshcd_tx_eq_params to track whether TX EQ
values came from static Device Tree data.
When adaptive TX Equalization is used, these static settings are not final:
- If valid settings are retrieved from qTxEQGnSettings/wTxEQGnSettingsExt,
those retrieved settings override static Device Tree settings.
- If retrieval is not available/valid, TX EQTR runs and trained settings
override static Device Tree settings.
So static Device Tree settings are a fallback for cases where adaptive TX
Equalization is not enabled or not used. Adaptive TX Equalization remains
the primary path when enabled.
No behavior changes for platforms that do not provide these properties.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260616113348.1168248-3-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS v5.0/UFSHCI v5.0 adds HS-G6 support (46.6 Gbps/lane) via UniPro v3.0
and M-PHY v6.0. These specs define TX Equalization for all High-Speed Gears
(not only HS-G6) to compensate channel loss and improve signal integrity at
high speed.
For HS-G6, M-PHY uses PAM4 1b1b line coding. Pre-Coding may also be
required depending on channel characteristics.
Document vendor-neutral properties in ufs-common.yaml:
- txeq-preshoot-g[1-6]
- txeq-deemphasis-g[1-6]
- tx-precode-enable-g6
Values are per-lane Host/Device tuples (2 values for x1, 4 values for
x2). PreShoot/DeEmphasis range from 0..7, and Precode is 0/1.
These are board-specific signal-integrity tuning values. They depend on
channel SI/PHY characterization and validation (host PHY, device PHY,
package, and board routing), and are determined by HW/PHY designers.
Although UFSHCI v5.0 supports TX Equalization Training via UniPro v3.0,
which allows host software to determine optimal TX Equalization at
runtime, static board-specific TX Equalization settings in the Device
Tree are still necessary because:
- TX Equalization Training is not supported for HS-G3 and below
- TX Equalization Training is disabled on some platforms
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616113348.1168248-2-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
. fix broken local SoC IO accesses
-----BEGIN PGP SIGNATURE-----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=3/dn
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-fixes-on-top-off-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"Fix incorrectly updated local SoC IO access function names.
Testing didn't pick them up because there was no specific defconfig
for these particular SoC parts. New defconfigs will be introduced in
the next merge cycle to remedy that"
* tag 'm68knommu-fixes-on-top-off-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access updates
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed in the
error path.
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y,
the ring_buffer_event_length() may return the wrong size. This
is because archs with that config set will always use the "big
event meta header" as that is 8 bytes keeping the payload 8 bytes
aligned, even when a 4 byte header could hold the size of the
event.
But ring_buffer_event_length() doesn't take this into account and only
subtracts 4 bytes for the meta header in the length when it should have
subtracted 8 bytes.
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu().
The osniose tracer has code that traverses the instances that it
uses, and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing it.
That is, a rmdir on an instance first unregisters the tracer. When the
unregister finishes, the rmdir expects that the tracer is finished with
the instance that it is using. By putting back the synchronize_rcu()
in osnoise_unregister_instance() the unregistering of osnoise will now
return when all the users of the instance have finished.
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped events
from the buffer itself, split the "commit" variable between the commit
value (with flags) and "size" that holds the size of the sub-buffer.
A cut and paste error changed the test of the reading from checking the
size of the buffer to the size of the event causing reads to only read one
event at a time.
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it static.
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of the
flag is the same and exits if they are, and then it checks if the current
tracer is the function tracer and exits if it isn't. The problem is that
these checks need to be in a reversed order, as if the tracer isn't the
function tracer, then the flag being checked may not exist. Reverse the
order of these checks.
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the user
reads the "trace" file. This can be seconds, minutes, hours, days, weeks,
and even months after the data was recorded into the ring buffer. Thus,
saving a pointer to an object into the ring buffer and then dereferencing
it from TP_printk() can cause harm as the object the pointer is pointing
to may no longer exist.
Fix all the trace events in ufs core to save the device name in the ring
buffer instead of dereferencing the device descriptor from TP_printk().
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards to
filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go beyond
the string. Change the logic to always pass in the length of the field
that is being matched.
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra work
that is only needed when the trace event is enabled. But this can hide
events that are placed in locations where RCU is not watching, and can
make lockdep not see these bugs when the event is not enabled.
The trace_##event##_enabled() was updated to always test to make sure RCU
is watching to catch locations that may call events without RCU being
active.
This caused a false positive for the irq_disabled() and related events. As
that use trace_irq_disabled_enabled() to force RCU to be watching when the
event is enabled via the ct_irq_enter() function, calls the event, and
then calls ct_irq_exit() to put RCU back to its original state.
The trace_irq_disabled_enabled() should not trigger a warning when RCU is
not watching because the code within its block handles the case properly.
Make a __trace_##event##_enabled() version for this event to use that
doesn't check RCU is watching as it handles the case when it isn't.
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed immediately.
But it is protected via RCU and needs to be freed after an RCU
grace period. Use queue_rcu_work() so that the event_mutex can also
be taken as user_event_put() takes the mutex on the last reference
is released.
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed.
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for the
current CPU and the allocations done for it are not freed.
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and setting
the value too large. Calculate the size upfront to fix the error and
simplify the logic.
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the ring_buffer_desc()
will fail as it tests the CPU number against the number of CPUs that are
used.
-----BEGIN PGP SIGNATURE-----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=+//w
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed
in the error path
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, the
ring_buffer_event_length() may return the wrong size. This is because
archs with that config set will always use the "big event meta
header" as that is 8 bytes keeping the payload 8 bytes aligned, even
when a 4 byte header could hold the size of the event
But ring_buffer_event_length() doesn't take this into account and
only subtracts 4 bytes for the meta header in the length when it
should have subtracted 8 bytes
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu(). The
osniose tracer has code that traverses the instances that it uses,
and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing
it
That is, a rmdir on an instance first unregisters the tracer. When
the unregister finishes, the rmdir expects that the tracer is
finished with the instance that it is using. By putting back the
synchronize_rcu() in osnoise_unregister_instance() the unregistering
of osnoise will now return when all the users of the instance have
finished
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped
events from the buffer itself, split the "commit" variable between
the commit value (with flags) and "size" that holds the size of the
sub-buffer. A cut and paste error changed the test of the reading
from checking the size of the buffer to the size of the event causing
reads to only read one event at a time
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it
static
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of
the flag is the same and exits if they are, and then it checks if the
current tracer is the function tracer and exits if it isn't. The
problem is that these checks need to be in a reversed order, as if
the tracer isn't the function tracer, then the flag being checked may
not exist. Reverse the order of these checks
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the
user reads the "trace" file. This can be seconds, minutes, hours,
days, weeks, and even months after the data was recorded into the
ring buffer. Thus, saving a pointer to an object into the ring buffer
and then dereferencing it from TP_printk() can cause harm as the
object the pointer is pointing to may no longer exist
Fix all the trace events in ufs core to save the device name in the
ring buffer instead of dereferencing the device descriptor from
TP_printk()
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards
to filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go
beyond the string. Change the logic to always pass in the length of
the field that is being matched
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra
work that is only needed when the trace event is enabled. But this
can hide events that are placed in locations where RCU is not
watching, and can make lockdep not see these bugs when the event is
not enabled
The trace_##event##_enabled() was updated to always test to make sure
RCU is watching to catch locations that may call events without RCU
being active
This caused a false positive for the irq_disabled() and related
events. As that use trace_irq_disabled_enabled() to force RCU to be
watching when the event is enabled via the ct_irq_enter() function,
calls the event, and then calls ct_irq_exit() to put RCU back to its
original state
The trace_irq_disabled_enabled() should not trigger a warning when
RCU is not watching because the code within its block handles the
case properly. Make a __trace_##event##_enabled() version for this
event to use that doesn't check RCU is watching as it handles the
case when it isn't
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed
immediately. But it is protected via RCU and needs to be freed after
an RCU grace period. Use queue_rcu_work() so that the event_mutex can
also be taken as user_event_put() takes the mutex on the last
reference is released
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for
the current CPU and the allocations done for it are not freed
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and
setting the value too large. Calculate the size upfront to fix the
error and simplify the logic
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the
ring_buffer_desc() will fail as it tests the CPU number against the
number of CPUs that are used
* tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Allow sparse CPU masks in ring_buffer_desc()
tracing/remotes: Fix struct_len in trace_remote_alloc_buffer()
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
selftests/user_events: Wait for deferred event teardown after unregister
tracing/synthetic: Free type string on error path
tracing/user_events: Fix use-after-free in user_event_mm_dup()
tracing: Add a no-rcu-check version of trace_##event##_enabled()
tracing: Prevent out-of-bounds read in glob matching
ufs: core: tracing: Do not dereference pointers in TP_printk()
tracing: Fix NULL pointer dereference in func_set_flag()
samples: ftrace: Fix typos in benchmark comment
tracing: Make tracepoint_printk static as not exported
ring-buffer: Fix ring_buffer_read_page() copying only one event per page
tracing: Remove unused ret assignment in tracing_set_tracer()
tracing/osnoise: Call synchronize_rcu() when unregistering
ring-buffer: Fix event length with forced 8-byte alignment
tracing/synthetic: Free pending field on error path
This avoids constant need to ioremap when instobjs move at least on
64-bit systems.
This create the io mapping on first use, because creating it at init
time causes a resource mapping error, because nouveau hasn't kicked
simpledrm off the hardware yet, but ioremap_wc the whole BAR causes an
overlap with BOOTFB/simpledrm. I think the resource system could do
better here, but it's easier to just delay creating the mapping until
first use.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260706030520.857104-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
