rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis.
Fixes: 26f1fad29a ("New driver: rtl8xxxu (mac80211)")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260630033117.3377-1-fanwu01@zju.edu.cn
cmdline_find_option() returns the full length of the parsed acpi_rsdp=
value. get_cmdline_acpi_rsdp() then silently truncates values which do
not fit in the val[] buffer.
Prevent boot_kstrtoul() from parsing a truncated value and then the
kernel from silently using the wrong RSDP address, see discussion in
Link:.
Issue a warning so that the user is aware that s/he supplied a malformed
value and can get feedback instead of silent crashes.
[ bp: Make commit message more precise. ]
Fixes: 3c98e71b42 ("x86/boot: Add "acpi_rsdp=" early parsing")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20260617130417.36651-4-thorsten.blum@linux.dev
Reading the in_accel_scale attribute on the DMARD09 has always returned
-EINVAL: the channels advertise scale via info_mask_shared_by_type so the
IIO core exposes the attribute, but dmard09_read_raw() only handles
IIO_CHAN_INFO_RAW, so a SCALE read falls through to 'default: return
-EINVAL':
$ cat .../iio:deviceX/in_accel_scale
cat: in_accel_scale: Invalid argument
leaving userspace with raw counts it cannot convert to m/s^2.
The driver was written from a vendor source [1] without a datasheet, and
the scale was declared but never implemented. The vendor source carries
the sensitivity: its conversion is
acc = raw * GRAVITY_EARTH_1000 / sensitivity (then / 1000 -> m/s^2)
with sensitivity = 32 and GRAVITY_EARTH_1000 = 9807 ("about
(9.80665)*1000"), i.e. 32 counts correspond to 1 g.
That sensitivity applies to the value this driver already reports as raw:
the vendor reduces each 16-bit sample to a signed 9-bit value, and the
preparation in dmard09_read_raw() yields the same value. It is
self-consistent: 256 counts / 32 = 8 g full scale, matching the +/-8g
range.
Implement the scale derived from that sensitivity using standard gravity:
scale = 9.80665 / 32 = 0.3064578125 m/s^2 per LSB
Link: 1f49d8c87b/custom/common/kernel/accelerometer/dmard09/dmard09.c [1]
Fixes: a4fa6509dd ("iio: accel: add support for the Domintech DMARD09 3-axis accelerometer")
Signed-off-by: Mert Seftali <mertsftl@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The early chips including RTL8852A, RTL8851B, RTL8852B and RTL8852C have
driver built-in tables, which are not preferred. New firmware is prepared
with corresponding tables in firmware elements, so we can start to
transition. After this patch, old firmware is still usable, but add a
prompt text for users to update firmware.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-16-pkshih@realtek.com
There are two struct to access TX power track tables. One is to access
driver built-in tables, and the other one is to access the tables in fw
element. As we are going to remove the built-in tables from driver, unify
to use the struct as fw element style.
The precedence is to use tables in fw element if present, and then
built-in tables.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-15-pkshih@realtek.com
8852A uses the average beacon RSSI to smooth the RSSI. However, before
the average beacon RSSI is available, the RSSI should use the PPDU
status RSSI of the received packet to avoid reporting the RSSI as -110 dBm.
Fixes: f0f3bf4b37 ("wifi: rtw89: 8852a: report average RSSI to avoid unnecessary scanning")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-13-pkshih@realtek.com
The temperature is rising when WiFi does high throughput, and reduce
voltage is a way to ease temperature.
The existing method to do thermal protect is to reduce TX duty, which
can affect throughput obviously. Before doing reduce TX duty (with -20
thermal value offset), driver does voltage reduction first, which doesn't
affect throughput but lower power consumption.
The voltage gram of register is 0.01 voltage, and the suggested maximum
reduction is 6 grams, which driver defines 6 as maximum voltage level.
When thermal value is over threshold, driver will try to adjust level and
corresponding register value. It should be adjust grams one by one with
additional 50 ms delay to ensure hardware work properly.
A note that the voltage must reset to normal value before entering power
save mode, otherwise WiFi card might get lost. Since it takes 50 ms delay
for each gram to adjust voltage, we stop to enter power save if protect
level is not zero.
By the way, adjust thermal threshold to 0xB4 as desired.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-10-pkshih@realtek.com
In order to lower temperature when WiFi is running, reduce the digital
voltage for the purpose.
The calibration values of digital voltage are programmed in efuse. One is
for normal use, which driver stores it into hal->thermal_prot_vmax. The
other is the minimum voltage, which is stored into hal->thermal_prot_vmin.
These two values define a range of supported voltage, which latter patch
uses them to adjust voltage depends on thermal value (temperature).
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-9-pkshih@realtek.com
The total number of TX compensation registers is 22, including 7 base and
15 ones according to operating channel.
The v0 is 22 ones per channel. To reduce array size, v1 treats 7 base as
common part across all conditions. However, we can fine tune the base part
to yield better performance, so divide base into two sets according to NSS.
Summarize dimensions as follows
base (7) vals(15)
v0 nss * band * path nss * band * path
v1 1 nss * band * path
v2 nss nss * band * path
Currently, v1 and v2 can present in a file, but only one fw element with
a specific format will be used for specific RFE type.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-6-pkshih@realtek.com
Assert BB reset in the intermediate "switch to 1+1" step of the EMLSR
switch sequence for all three MLO mode transitions by updating the
B_EMLSR_SWITCH_BE4 intermediate value from 0xAFFF to 0x3BAB.
Without the BB reset in this step, the baseband can be left in an
inconsistent state before settling into the final MLO configuration.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-4-pkshih@realtek.com
Add support for path difference based channel smoothing for RTL8922D chip.
This feature measures the ratio of NDP frames and uses a moving average
filter to decide whether to enable beamforming channel smoothing. Tone
index selection is dynamically adjusted based on bandwidth and link mode
(HE/EHT vs VHT). The feature is only enabled for RTL8922D_CID7090 variant.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-3-pkshih@realtek.com
Remove the 40MHz bandwidth compensation from CCK efuse gain calculation.
The design no longer requires the +3dB compensation for 40MHz channels.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260707091056.42771-2-pkshih@realtek.com
Co-RX means Wi-Fi & Bluetooth can be able to RX in the same time. This
patch is for judging the Wi-Fi/Bluetooth condition could be Co-RX or not,
and how to set the gain and power.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260706025445.18428-10-pkshih@realtek.com
Update WiFi status to each Bluetooth & collect status from the two
Bluetooth adapter by non-stop power zone register. To correct the meaning
of variable, redefine the naming for the variables.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260706025445.18428-9-pkshih@realtek.com
Because the two MAC should have their own individual using, they will
need different TDMA mechanism. This patch will bind TDMA with MAC index,
and also the corresponding antenna, hardware grant signal setting.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260706025445.18428-8-pkshih@realtek.com
Support for UMC CPUs was removed in
7d328c5de4 ("x86/cpu: Remove CPU_SUP_UMC_32 support"),
but a Makefile rule for the support code remained. Remove it.
Fixes: 7d328c5de4 ("x86/cpu: Remove CPU_SUP_UMC_32 support")
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ahmed S. Darwish <darwi@linutronix.de>
Link: https://patch.msgid.link/20260610033252.164571-1-enelsonmoore@gmail.com
The mechanism needs information to know which MAC is coexisting with which
Bluetooth and when to enable TDMA with which MAC. So change an variable to
describe the binding target.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260706025445.18428-4-pkshih@realtek.com
Separate these two type of initialize entry. Because Wi-Fi power save
leaving will also call the initializing, but don't have to reset all the
stored variables.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260706025445.18428-3-pkshih@realtek.com
The version 10 Init info add I/O offload type & variable Bluetooth
function (EX: Zigbee/Thread...etc) into the structure definition.
Firmware need to synchronize these information to do corresponding
setting.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260706025445.18428-2-pkshih@realtek.com
I have volunteered to review Xilinx EDAC related changes. Add myself as
a reviewer to stay aligned with ongoing patch activity and actively contribute
to this subsystem.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260625103749.1416083-1-radhey.shyam.pandey@amd.com
If an empty firmware file is supplied via CONFIG_EXTRA_FIRMWARE, the
build currently succeeds but creates an empty section. While the
firmware loader will not return such sections it is better to avoid
adding them in the first place.
Add a compile-time size check to the filechk_fwbin macro to abort the
build early if a 0-size firmware is encountered.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260426043041.649202-2-dmitry.torokhov@gmail.com
[ Use 'exit 1' to properly fail the build. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Leon Hwang says:
====================
bpf: Fix WARNING in bpf_trampoline_multi_detach
Since tracing_multi link does not set ftrace_managed, it would fail to
release the tracing_multi link when attaching tracing_multi link and
then attaching fentry link.
[ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97
...
[ 3.733170] bpf_tracing_multi_link_release+0x14/0x30
[ 3.733890] bpf_link_free+0x58/0x130
[ 3.734414] bpf_link_release+0x23/0x30
Fix it by setting 'ftrace_managed = true' in register_fentry_multi().
Note: the reason of targeting bpf-next tree is I'm planning to add
tracing_multi link support for bpf progs, that would rely on the fix and
have code conflict with the test.
Changes:
v1 -> v2:
* Collect Acked-by from Jiri, thanks.
* Check arg using tracing_multi_arg_check() in bpf prog in test.
(per Sashiko)
* v1: https://lore.kernel.org/bpf/20260710144734.78203-1-leon.hwang@linux.dev/
====================
Link: https://patch.msgid.link/20260711124822.29406-1-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Verify that there's no any issue to attach tracing_multi link, then attach
fentry link.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260711124822.29406-3-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Since tracing_multi link does not set ftrace_managed, it would fail to
release the tracing_multi link when attaching tracing_multi link and
then attaching fentry link.
[ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97
...
[ 3.733170] bpf_tracing_multi_link_release+0x14/0x30
[ 3.733890] bpf_link_free+0x58/0x130
[ 3.734414] bpf_link_release+0x23/0x30
Fix it by setting 'ftrace_managed = true' in register_fentry_multi().
Fixes: aef4dfa790 ("bpf: Add bpf_trampoline_multi_attach/detach functions")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260711124822.29406-2-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Nicholas Dudar says:
====================
bpf: require an owned cpumask for bpf_cpumask_populate()
bpf_cpumask_populate() writes its destination with bitmap_copy() but
types it as struct cpumask *, so the verifier accepts a borrowed,
read-only cpumask (for example from scx_bpf_get_online_cpumask()) as a
writable destination. Fix it and add a selftest for coverage.
Changelog:
----------
v2 -> v3 (v1/v2 were a private report to security@kernel.org)
* Split the fix and selftest into separate patches.
* Target bpf-next instead of bpf.
====================
Link: https://patch.msgid.link/20260709182800.2037938-1-main.kalliope@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_cpumask_populate() now takes a struct bpf_cpumask *, so update the
kfunc declaration and drop the struct cpumask * casts in the existing
populate tests. Add test_populate_borrowed_destination, which passes a
borrowed task->cpus_ptr and asserts the verifier rejects it as a writable
destination.
Signed-off-by: Nicholas Dudar <main.kalliope@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260709182800.2037938-3-main.kalliope@gmail.com
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_cpumask_populate() writes to its destination with bitmap_copy(), but
the destination is typed as struct cpumask *. That allows the verifier to
accept borrowed cpumask pointers returned by read-only kfuncs, such as
scx_bpf_get_online_cpumask(), as a writable destination.
Make the destination a struct bpf_cpumask * so populate follows the same
ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue
to accept const struct cpumask * inputs.
Fixes: 950ad93df2 ("bpf: add kfunc for populating cpumask bits")
Signed-off-by: Nicholas Dudar <main.kalliope@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260709182800.2037938-2-main.kalliope@gmail.com
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Currently, the builtin firmware loader allows 0-size firmware to be
returned successfully to drivers. This differs from all other loading
mechanisms (filesystem, sysfs fallback) which reject 0-byte files, and
forces drivers to add boilerplate size checks.
Modify firmware_request_builtin() to reject 0-size firmware. This will
also result in firmware loader falling back to other mechanisms if an
empty built-in firmware is present.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260426043041.649202-1-dmitry.torokhov@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In preparation for removing the strlcat() API[1], replace its uses in
i8042-acpipnpio.h.
i8042_pnp_id_to_string() accumulates a variable number of PNP ids in
a loop, which is what seq_buf is for. The kbd and aux probe functions
build a name from at most three parts that are all known up front, so
the whole construction becomes a single scnprintf() there.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/akyW4xkvCCROM0SE@dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If enabling VIO fails after VDD has been enabled, runtime resume
returns without disabling VDD. Likewise, if device reinitialization
fails, both supplies remain enabled. The runtime PM core keeps the
device suspended when its resume callback fails, so the supplies must
be restored to the suspended state.
Disable the supplies enabled by the callback before returning an error.
Fixes: 97d642e230 ("iio: light: Add a driver for Sharp GP2AP002x00F")
Assisted-by: Codex:gpt-5
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
- A fix for MELFAS MMS114 touchscreen driver to reject invalid touch IDs
and avoid multi-touch slot corruption
- A fix for a crash in Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- Fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCalLC2QAKCRBAj56VGEWX
nLLwAQDExlB/cWm2Hpmim13SIetpNbnRNDDUBXZqlx26U6tCUgD9Ek85LvbRiWOJ
dTqs7ieSn2iPQxHFvHOAZD5ohSGj/wI=
=g2px
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fix MELFAS MMS114 touchscreen driver to reject invalid touch IDs and
avoid multi-touch slot corruption
- fix a crash in the Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races
* tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mms114 - fix multi-touch slot corruption
Input: maple_keyb - set driver data before registering input device
Input: maplecontrol - set driver data before registering input device
Input: maplemouse - set driver data before registering input device
Input: maplemouse - fix NULL pointer dereference in open()
rpr0521_runtime_suspend() powers the device down and marks the regmap
cache dirty. rpr0521_runtime_resume() syncs the cache before restoring
enabled ALS/PXS channels, but currently ignores a regcache_sync()
failure and can still return success.
Return the regcache_sync() error so resume does not hide a failed
register restore.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
vcnl4035_runtime_suspend() marks the regmap cache dirty before runtime
suspend. vcnl4035_runtime_resume() then syncs the cache before re-
enabling ALS, but currently ignores a regcache_sync() failure and can
still report resume success.
Return the regcache_sync() error so the PM core sees the failed register
restore.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
m62332_set_value() enables the Vcc regulator on every write of a
non-zero value and disables it on every write of zero, without tracking
the channel's current state. Because the regulator is reference counted,
changing a channel directly from one non-zero value to another enables
it more than once, while a later write of zero disables it only once.
The reference count never returns to zero and the regulator is left
enabled indefinitely.
Only enable the regulator on the transition from zero to non-zero, and
only disable it on the transition from non-zero to zero, using the
previously stored channel value to detect the edge. Balance the
regulator on the I2C error path so the reference count stays consistent
if the write fails.
Fixes: b87b0c0f81 ("iio: add m62332 DAC driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260418130322.106769-1-erick.henrique.rodrigues%40usp.br
Cc: stable@vger.kernel.org
Signed-off-by: Erick Henrique <erick.henrique.rodrigues@usp.br>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Avoid using devm_iio_device_register(), as this driver requires explicit
error handling and teardown ordering.
With devm_iio_device_register(), IIO device remains registered until the
devres cleanup phase. However, driver's remove() callback removes the
sensor hub callback and trigger support. This can create a race window
where IIO device is still visible and read_raw() requests are issued.
These requests might call sensor_hub_input_attr_get_raw_value(), which
waits up to 5 seconds for a response from the sensor hub callback that
has already been removed.
Add an explicit iio_device_unregister() call in the teardown path to
ensure deterministic cleanup, so that userspace can no longer access the
device once backend resources begin to be dismantled.
Fixes: 59d0f2da35 ("iio: hid: Add temperature sensor support")
Cc: stable@vger.kernel.org
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
- dm-era: fix out of bounds memory access; fix crashes on invalid args
- dm-verity: fix buffer overflow in forward error correction
- dm-thin: fix misbehavior on I/O failures
- dm-pcache: fix NULL pointer dereference on invalid arguments
- dm-inlinecrypt: fix memory leak on error handling
- dm-integrity: fix ignoring the 'fix_hmac' option on device open
- dm: don't store the keyring in memory for a long term
- 12 miscellaneous fixes for bugs found by Claude Opus 4.6
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCalKUaxQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbbQwAP9pHgNUinD95o9vnu3d3QNmjnEDmrgZ
+kxNFRpWXvbzKQEArYWPLS/2dwf4nG0Fa8PtJTwkjI/6UeublAy5MrdTqA0=
=pkBx
-----END PGP SIGNATURE-----
Merge tag 'for-7.2/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-log: fix overflow on 32-bit machines
- dm-era: fix out of bounds memory access; fix crashes on invalid args
- dm-verity: fix buffer overflow in forward error correction
- dm-thin: fix misbehavior on I/O failures
- dm-pcache: fix NULL pointer dereference on invalid arguments
- dm-inlinecrypt: fix memory leak on error handling
- dm-integrity: fix ignoring the 'fix_hmac' option on device open
- dm: don't store the keyring in memory for a long term
- 12 miscellaneous fixes for bugs found by Claude Opus 4.6
* tag 'for-7.2/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (23 commits)
dm thin metadata: fix superblock refcount leak on snapshot shadow failure
dm-stats: fix dm_jiffies_to_msec64
dm-stats: fix merge accounting
dm-bufio: fix wrong count calculation in dm_bufio_issue_discard
dm-verity: make error counter atomic
dm-verity: increase sprintf buffer size
dm-verity: fix a possible NULL pointer dereference
dm-verity: avoid double increment of &use_bh_wq_enabled
dm-ioctl: fix a possible overflow in list_version_get_info
dm_early_create: fix freeing used table on dm_resume failure
dm-integrity: fix a bug if the bio is out of limits
dm-integrity: don't increment hash_offset twice
dm-integrity: fix leaking uninitialized kernel memory
dm-integrity: fix the 'fix_hmac' option
dm era: fix error code propagation in era_ctr()
dm era: fix NULL pointer dereference in metadata_open()
dm: avoid leaking the caller's thread keyring via the table device file
dm-inlinecrypt: Fix an error handling path in inlinecrypt_ctr()
dm-pcache: reject option groups without values
dm thin metadata: fix metadata snapshot consistency on commit failure
...
Currently the generic __ATTR*() macros are used to initialize kobject
attributes. These are not able to handle the upcoming piece-by-piece
constification of the attribute callback handlers.
Add dedicated macros of kobject attributes. For now these are the same
as the generic macros, but they will change soon. Users will be
converted to these macros as part of the constification, but it is
expected that they will be used generally in the future.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260707-sysfs-const-attr-kobj-attr-prep-v2-1-35ae1bc0f9ef@weissschuh.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
