Adapt driver to use regmap api with spi bus instead of direct spi
subsystem calls to access device registers. Simplify and standardize the
register interactions using more abstract and bus agnostic regmap api
to reduce code duplication and improve maintainability. Define spi regmap
config suitable for m41t93 spi bus protocol to achieve same transactions on
spi bus.
Tested on TI am62x sk board with m41t93 rtc chip connected over spi0.
Validated set and get time using hwclock tool and verified spi bus
transfers using logic analyzer.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://patch.msgid.link/180f9b6c3ee7c490fe3537c2d50a92cec359e4cd.1758379856.git.akhilesh@ee.iitb.ac.in
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix minor cgroup v2 memory.stat documentation issues. Correct the
vmalloc per-node marker now that vmalloc uses the native NR_VMALLOC node
stat, and document zswap_incomp as a byte-valued memory amount instead
of as a page counter.
Fixes: c466412c73 ("mm: memcontrol: switch to native NR_VMALLOC vmstat counter")
Fixes: 5ad41a38c3 ("mm: zswap: add per-memcg stat for incompressible pages")
Signed-off-by: Doehyun Baek <doehyunbaek@gmail.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=h+xD
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
As reported by sashiko [1], cpuset_update_tasks_nodemask() will do
mpol_rebind_mm() and possibly cpuset_migrate_mm() for all threads of
a multithreaded process. Since commit 3df9ca0a2b ("cpuset: migrate
memory only for threadgroup leaders"), cpuset_attach() had been updated
to rebind and migrate memory only for threadgroup leaders to mark the
group leader as the owner of the mm_struct.
To be consistent and avoid unnecessary performance overhead for heavily
multithreaded processes, follow the cpuset_attach() example and perform
memory rebind and migration only for threadgroup leaders.
Also add a paragraph in cgroup-v2.rst under cpuset.mems that the
threadgroup leader is the memory owner of that threadgroup. Therefore
the non-leading threads shouldn't be in other cgroups whose "cpuset.mems"
doesn't fully overlap that of the group leader.
[1] https://sashiko.dev/#/patchset/20260621032816.1806773-1-longman%40redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ridong Chen <ridong.chen@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
As reported by sashiko [1], cpuset_hotplug_update_tasks() may perform
unnecessary task iteration and updating of tasks' CPU and node masks
when mems_allowed and/or cpus_allowed are not set in cpuset v2. It is
due to the fact that the temporary new_cpus and new_mems masks do not
inherit parent's effective_cpus/mems when they are empty which is the
expected behavior for cpuset v2 since commit 4ec22e9c5a ("cpuset:
Enable cpuset controller in default hierarchy").
Fix that and avoid unnecessary work by enhancing
compute_effective_cpumask() to add the empty cpumask check
and inheriting the parent's versions if empty when in v2. A new
compute_effective_nodemask() helper is also added to perform a similar
function for new effective_mems.
Add new test_cpuset_prs.sh test cases to confirm that effective_cpus
will inherit the parent's version if cpuset.cpus is empty.
[1] https://sashiko.dev/#/patchset/20260621032816.1806773-1-longman%40redhat.com
Suggested-by: Ridong Chen <ridong.chen@linux.dev>
Fixes: 4ec22e9c5a ("cpuset: Enable cpuset controller in default hierarchy")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ridong Chen <ridong.chen@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
to the MSI IRQ support code (Yuanhe Shu)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AQ7U
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2026-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq fix from Ingo Molnar:
- Revert a change that added a bad iounmap(NULL) call
to the MSI IRQ support code (Yuanhe Shu)
* tag 'irq-msi-2026-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "PCI/MSI: Unmap MSI-X region on error"
- Align sparc to other archs by providing ucontext.h wrapper
- Fix buffer underflow in led driver
- Export mcount for clang and disable compat when using lld for linking
- API choice improvement for sysfs code for vio
- Fix build warnings and notification of missing prototype
- Remove dead code and dead configs
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCajuFDhQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy2QqAQDLwIeGHu6ZzVpAvmZlBn3Hl823/UoZ
LnAn1UfSmXL3JQEAyeu/EN9/+8IVIDECWxYzSp+1OCLdla/v/cVrAvv7BQ4=
=cUkR
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Align sparc to other archs by providing ucontext.h wrapper
- Fix buffer underflow in led driver
- Export mcount for clang and disable compat when using lld for linking
- API choice improvement for sysfs code for vio
- Fix build warnings and notification of missing prototype
- Remove dead code and dead configs
* tag 'sparc-for-7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc: Remove remaining defconfig references to the pktcdvd driver
sparc: led: avoid trimming a newline from empty writes
sparc: Export mcount for Clang-built modules
sparc: Disable compat support with LLD
sparc: Avoid -Wunused-but-set-parameter in clear_user_page()
sparc: add _mcount() prototype
sparc64: uprobes: add missing break
sparc: remove unused SERIAL_CONSOLE config option
sparc32: remove deadwood swift_flush_tlb_page() debug code
sparc: uapi: Add ucontext.h
sparc: vio: use sysfs_emit in sysfs show functions
* Cleanups
- replace get_zeroed_page() with kzalloc()
- remove unnecessary goto and associated label
- change fn_label_build() to return err on failure instead of NULL or err
- free rawdata as soon as possible
- use explicit instead of implicit flex array in rawdata_f_data
- use __label_make_stale in __aa_proxy_redirect
- return correct error by propagate -ENOMEM correctly in unpack_table
- aa_label_alloc use aa_label_free on alloc failure
- add a conditional version of get_newest_label
* Bug Fixes
- mediate the implicit connect of TCP fast open sendmsg
- fix C23ism of label immediately before a declaration
- fix kernel-doc warnings
- fix spelling mistakes
- fix use-after-free in rawdata dedup loop
- Fix inverted comparison in cache_hold_inc()
- fix uninitialized pointer passed to audit_log_untrustedstring()
- don't audit files pointing to aa_null.dentry
- put secmark label after secid lookup
- fix aa_getprocattr free procattr leak on format failure
- release exe file resources on path failure
- fail policy unpack on accept2 allocation failure
- Fix return in ns_mkdir_op
- remove or add symlinks to rawdata according to export_binary
- fix NULL pointer dereference in unpack_pdb
- fix potential UAF in aa_replace_profiles
- grab ns lock and refresh when looking up changehat child profiles
- enable differential encoding
- check label build before no_new_privs test
- conditionally compile get_loaddata_common_ref()
- fix unix socket mediation cache update, and leak
-----BEGIN PGP SIGNATURE-----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=2jx/
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Another round of bug fixing and some code cleanups, there are no new
features. The biggest thing to note is Georgia is being added to help
co-maintain apparmor.
Cleanups:
- replace get_zeroed_page() with kzalloc()
- remove unnecessary goto and associated label
- change fn_label_build() to return err on failure instead of NULL or
err
- free rawdata as soon as possible
- use explicit instead of implicit flex array in rawdata_f_data
- use __label_make_stale in __aa_proxy_redirect
- return correct error by propagate -ENOMEM correctly in unpack_table
- aa_label_alloc use aa_label_free on alloc failure
- add a conditional version of get_newest_label
Bug Fixes:
- mediate the implicit connect of TCP fast open sendmsg
- fix C23ism of label immediately before a declaration
- fix kernel-doc warnings
- fix spelling mistakes
- fix use-after-free in rawdata dedup loop
- Fix inverted comparison in cache_hold_inc()
- fix uninitialized pointer passed to audit_log_untrustedstring()
- don't audit files pointing to aa_null.dentry
- put secmark label after secid lookup
- fix aa_getprocattr free procattr leak on format failure
- release exe file resources on path failure
- fail policy unpack on accept2 allocation failure
- Fix return in ns_mkdir_op
- remove or add symlinks to rawdata according to export_binary
- fix NULL pointer dereference in unpack_pdb
- fix potential UAF in aa_replace_profiles
- grab ns lock and refresh when looking up changehat child profiles
- enable differential encoding
- check label build before no_new_privs test
- conditionally compile get_loaddata_common_ref()
- fix unix socket mediation cache update, and leak"
* tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (35 commits)
apparmor: advertise the tcp fast open fix is applied
apparmor: mediate the implicit connect of TCP fast open sendmsg
apparmor: fix label can not be immediately before a declaration
apparmor: fix kernel-doc warnings
apparmor: replace get_zeroed_page() with kzalloc()
security: apparmor: fix two spelling mistakes
apparmor: fix use-after-free in rawdata dedup loop
apparmor: Fix inverted comparison in cache_hold_inc()
apparmor: fix uninitialised pointer passed to audit_log_untrustedstring()
apparmor: don't audit files pointing to aa_null.dentry
apparmor: put secmark label after secid lookup
apparmor: aa_getprocattr free procattr leak on format failure
apparmor: remove unnecessary goto and associated label
apparmor: release exe file resources on path failure
apparmor: fail policy unpack on accept2 allocation failure
apparmor: Fix return in ns_mkdir_op
apparmor: remove or add symlinks to rawdata according to export_binary
apparmor: fix NULL pointer dereference in unpack_pdb
apparmor: make fn_label_build() capable of handling not supported
apparmor: change fn_label_build() call to not return NULL
...
iocost_monitor.py imports drgn before argparse can handle "-h" or report
argument errors. That makes basic usage help fail on systems where drgn is
not installed.
Parse arguments before importing drgn so the help and argument-error paths
work without the runtime debugging dependency. Normal execution still
imports drgn before reading kernel state.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
wq_monitor.py and wq_dump.py import drgn before argparse can handle "-h".
That makes help fail on systems where drgn is not installed, even though
the scripts do not need drgn to print usage text.
Parse arguments before importing drgn so the help path works without the
runtime debugging dependency. Normal execution still imports drgn before
reading kernel state.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The deprecation notices for direct p->scx.slice/dsq_vtime writes and for
ops->cpu_acquire/release() use plain pr_warn(), so they repeat on every
scheduler (re)load and can flood the kernel log.
The slice/dsq_vtime notice is the worst offender: it is emitted from the
BPF verifier's btf_struct_access callback, which is re-evaluated as the
verifier explores program paths, so a single scheduler load can print it
many times -- hundreds of lines on some hosts, dozens within the same
second.
Switch both notices to pr_warn_ratelimited() so each deprecation is still
reported but bursts no longer spam the log, and add the missing newline
to the slice/dsq_vtime message.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCajs+4wAKCRBAj56VGEWX
nN+EAQDaknpx+XZLU28jQqm4mK2BZde1cbtZ9/D7VS3n50by9AD/e+Tr3aqDAjTs
hmDqdkrBIo8YlvlCvq4dosAKBH8gXA0=
=nZiu
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
Added:
depth limit to indx_find_buffer() to prevent stack overflow
validate split-point offset in indx_insert_into_buffer()
bounds check to run_get_highest_vcn()
fileattr_get() and fileattr_set() support
zero stale pagecache beyond valid data length
handle delayed allocation overlap in run lookup
validate lcns_follow in log_replay() conversion
cap RESTART_TABLE free-chain walker at rt->used
resize log->one_page_buf when adopting on-disk page size
reject direct userspace writes to reserved $LX* xattrs
Fixed:
out-of-bounds read in decompress_lznt()
avoid -Wmaybe-uninitialized warnings
hold ni_lock across readdir metadata walk
preserve non-DOS attribute bits in system.dos_attrib
validate index entry key bounds
syncing wrong inode on DIRSYNC cross-directory rename
validate Dirty Page Table capacity in log_replay() copy_lcns
wrong LCN in run_remove_range() when splitting a run
allocate iomap inline_data using alloc_page
mount failure on 64K page-size kernels
out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
bound attr_off in UpdateResidentValue against data_off
bound DeleteIndexEntryAllocation memmove length
bound copy_lcns dp->page_lcns[] index in analysis pass
bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
prevent potential lcn remains uninitialized
Changed:
bound to_move in indx_insert_into_root() before hdr_insert_head()
call _ntfs_bad_inode() when failing to rename
fold resident writeback into writepages loop
force waiting for direct I/O completion
fold file size handling into ntfs_set_size()
reject SEEK_DATA and SEEK_HOLE past EOF early
format code, add descriptive comments and remove non-useful
-----BEGIN PGP SIGNATURE-----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=OVdT
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_7.2' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Added:
- depth limit to indx_find_buffer() to prevent stack overflow
- validate split-point offset in indx_insert_into_buffer()
- bounds check to run_get_highest_vcn()
- fileattr_get() and fileattr_set() support
- zero stale pagecache beyond valid data length
- handle delayed allocation overlap in run lookup
- validate lcns_follow in log_replay() conversion
- cap RESTART_TABLE free-chain walker at rt->used
- resize log->one_page_buf when adopting on-disk page size
- reject direct userspace writes to reserved $LX* xattrs
Fixed:
- out-of-bounds read in decompress_lznt()
- avoid -Wmaybe-uninitialized warnings
- hold ni_lock across readdir metadata walk
- preserve non-DOS attribute bits in system.dos_attrib
- validate index entry key bounds
- syncing wrong inode on DIRSYNC cross-directory rename
- validate Dirty Page Table capacity in log_replay() copy_lcns
- wrong LCN in run_remove_range() when splitting a run
- allocate iomap inline_data using alloc_page
- mount failure on 64K page-size kernels
- out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
- bound attr_off in UpdateResidentValue against data_off
- bound DeleteIndexEntryAllocation memmove length
- bound copy_lcns dp->page_lcns[] index in analysis pass
- bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
- prevent potential lcn remains uninitialized
Changed:
- bound to_move in indx_insert_into_root() before hdr_insert_head()
- call _ntfs_bad_inode() when failing to rename
- fold resident writeback into writepages loop
- force waiting for direct I/O completion
- fold file size handling into ntfs_set_size()
- reject SEEK_DATA and SEEK_HOLE past EOF early
- format code, add descriptive comments and remove non-useful"
* tag 'ntfs3_for_7.2' of https://github.com/Paragon-Software-Group/linux-ntfs3: (34 commits)
ntfs3: reject direct userspace writes to reserved $LX* xattrs
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
fs/ntfs3: prevent potential lcn remains uninitialized
ntfs3: cap RESTART_TABLE free-chain walker at rt->used
fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
fs/ntfs3: validate lcns_follow in log_replay conversion
fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
fs/ntfs3: bound attr_off in UpdateResidentValue against data_off
ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
fs/ntfs3: fix mount failure on 64K page-size kernels
ntfs3: avoid another -Wmaybe-uninitialized warning
ntfs3: Allocate iomap inline_data using alloc_page
fs/ntfs3: format code, deal with comments
fs/ntfs3: reject SEEK_DATA and SEEK_HOLE past EOF early
fs/ntfs3: fold file size handling into ntfs_set_size()
fs/ntfs3: force waiting for direct I/O completion
fs/ntfs3: fold resident writeback into writepages loop
fs/ntfs3: handle delayed allocation overlap in run lookup
fs/ntfs3: zero stale pagecache beyond valid data length
...
When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA:
spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and
spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the
SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single()
returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and
falls back to PIO. The dynamic-burst DMA path uses its own bounce
buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped
are not set and the core's DMA->PIO retry is skipped; the driver falls
back to PIO internally. But none of the DMA-mode configuration is
undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst
length and dynamic_burst cleared, and the transferred data is corrupted.
This is easily hit on i.MX8MP boards that describe ECSPI DMA in the
device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin):
every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then
returns shifted TPM2_GetCapability data, is flagged "field failure
mode", /dev/tpmrm0 is never created.
Set controller->fallback before re-running spi_imx_setupxfer() so the
ECSPI is reconfigured exactly like a normal PIO transfer. With
controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma()
return false, so it clears spi_imx->usedma and reprograms the controller
(clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No
explicit spi_imx->usedma = false is needed: setupxfer() already updates
it from the can_dma() result.
Fixes: faa8e404ad ("spi: imx: support dynamic burst length for ECSPI DMA mode")
Cc: stable@vger.kernel.org
Signed-off-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260624151958.18626-1-javier.pastrana@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the link_caps pointer to the common rate helpers in
intel_dp_link_caps.c, as it holds the state with the relevant
information.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-29-imre.deak@intel.com
Pass the link_caps pointer to the update/lookup helpers in
intel_dp_link_caps.c, as it holds the state with the relevant
information.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-28-imre.deak@intel.com
Pass the link_caps pointer to static functions in intel_dp_link_caps.c,
as it holds the state with the relevant information.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-27-imre.deak@intel.com
Now that all users access the max link limits via helpers, move tracking
of these limits from struct intel_dp to the link_caps state.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-26-imre.deak@intel.com
Add a helper to reset the link_caps state, removing all restrictions
except user-forced parameters, re-allowing all supported
configurations. Currently this only resets the maximum link limits,
but follow-up changes will also re-enable configurations previously
disabled on a per-configuration basis by fallback or other logic.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-25-imre.deak@intel.com
Add a helper to reset the link_caps::max_limits max link limits to the
maximum common supported rate and lane count.
This is needed by a follow-up change in the link training fallback code,
which temporarily resets max_limits before searching for a fallback
configuration.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-24-imre.deak@intel.com
Add intel_dp_link_caps_set_max_limits() to set the current maximum link
limits (max bound over all allowed configurations) through the link caps
API instead of direct accesses.
This allows tracking the state internally within the link caps module.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-23-imre.deak@intel.com
Add intel_dp_link_caps_get_max_limits() to query the current maximum
link limits (max bound over all allowed configurations) through the
link caps API instead of direct accesses.
This allows tracking the state internally within the link caps module.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-22-imre.deak@intel.com
Convert all users of intel_dp_max_common_lane_count() to query the
maximum common lane count via the link capability API, in common with
the link rate queries.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-21-imre.deak@intel.com
Pass the maximum common lane count to intel_dp_link_caps_update() and
track it together with the supported link rates. This prepares for
converting all users of intel_dp_max_common_lane_count() to query the
value from the link caps module instead.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-20-imre.deak@intel.com
Now that all users access the supported link rates via helpers, move
tracking of these rates from struct intel_dp to the link_caps state.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-19-imre.deak@intel.com
Add intel_dp_link_caps_common_rate_idx() to look up supported link rates
tracked by the link_caps module by rate. This prepares for tracking these
capabilities internally within the link caps module.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-18-imre.deak@intel.com
Add intel_dp_link_caps_num_common_rates() to return the number of
supported link rates tracked by the link_caps module. This prepares for
tracking these capabilities internally within the link caps module.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-17-imre.deak@intel.com
Add intel_dp_link_caps_print_rates() to print all the supported link
rates tracked by the link_caps module. This prepares for tracking
these capabilities internally within the link caps module.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-16-imre.deak@intel.com
Pass the supported link rates explicitly to intel_dp_link_caps_update().
This prepares for tracking these capabilities internally within the
link caps module.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-15-imre.deak@intel.com
Factor out a helper to get the supported link rates. This allows to
gather all the link capabilities and pass these to the link capability
module from a single place. A follow-up change will extend this to
gather and pass the maximum lane count capability in the same way.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-14-imre.deak@intel.com
Rename the helper updating link configurations to
intel_dp_link_caps_update() to better reflect its functionality.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-13-imre.deak@intel.com
Move tracking of the link configurations from struct intel_dp to struct
intel_dp_link_caps.
Previous changes moved the helpers operating on configurations to the
link caps module, so the state can now be kept internal to that module.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-12-imre.deak@intel.com
Move the helpers handling link configurations to intel_dp_link_caps.c.
Their functionality is part of the link capability logic and will be
updated to use the link capability state in follow-up changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-11-imre.deak@intel.com
Move tracking of the forced link parameters from struct intel_dp to
struct intel_dp_link_caps.
Previous changes made all users access these parameters through the link
caps helpers, so the state can now be kept internal to the link caps
module.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-10-imre.deak@intel.com
Use intel_dp_link_caps_get_forced_params() in the link training fallback
code instead of directly accessing the state. This allows the link caps
module to track changes to forced parameters internally.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-9-imre.deak@intel.com
Move the debugfs entries for the forced and max DP link parameters to
intel_dp_link_caps. Their functionality is part of the link capability
logic and will be updated to use the link capability state in follow-up
changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-8-imre.deak@intel.com
Simplify querying the forced link rate and lane count by
performing the zero checks inside the helpers, allowing callers
to use the returned values directly.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-7-imre.deak@intel.com
Move the helpers handling forced link parameters to intel_dp_link_caps.c.
Their functionality is part of the link capability logic and will be
updated to use the link capability state in follow-up changes.
Return the forced link rate and lane count through a
struct intel_dp_link_config, which is the canonical way the rest of the
link capability API will also accept and return link configurations.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-6-imre.deak@intel.com
Move the helpers handling common link rates to intel_dp_link_caps.c.
Their functionality is part of the link capability logic and will be
updated to use the link capability state in follow-up changes.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-5-imre.deak@intel.com
Start isolating the DP link capability logic from the generic DP code by
adding a separate intel_dp_link_caps module and a corresponding state
object.
Allocate the state so it can remain opaque within its module.
Follow-up changes will move link capability helpers and state from
intel_dp.c and intel_dp_link_training.c to the new module and state.
v2: Remove unnecessary function documentation. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-4-imre.deak@intel.com
Add a struct representing the public unpacked format of a link
configuration. This will be used by the DP link capability API added
as a follow-up, and by DP code in general that needs to track a link
configuration.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-3-imre.deak@intel.com
Rename intel_dp_link_config to intel_dp_link_config_entry to prepare
for tracking a link configuration in both an internal packed and a
public unpacked format. A follow-up change will add
struct intel_dp_link_config representing the public unpacked format.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260616200849.3534628-2-imre.deak@intel.com
- Automatically allocate a full page for L2 guest stacks on x86 instead of
requiring test-specific L1 guest code to carve out a portion of the L1
stack for L2 usage, and to ensure the L2 stack also adheres to the x86-64
calling convention ABI.
- Add a selftest to verify {Guest,Host}-Only behavior in x86's mediated PMU.
-----BEGIN PGP SIGNATURE-----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=AYtV
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_l2_stacks-7.3' of https://github.com/kvm-x86/linux into HEAD
KVM selftests for 7.3, early edition
- Automatically allocate a full page for L2 guest stacks on x86 instead of
requiring test-specific L1 guest code to carve out a portion of the L1
stack for L2 usage, and to ensure the L2 stack also adheres to the x86-64
calling convention ABI.
- Add a selftest to verify {Guest,Host}-Only behavior in x86's mediated PMU.
Adjust the panel fixed mode selection algorithm to only consider
fixed modes that are "VRR compatible" with the old fixed mode
when userspace doesn't want to allow full modesets. This will
allow a VRR based refresh rate changes (ie. just a change in
the vblank length) via the fastset path.
When full modesets are allowed, we still use the original algorithm
as that may pick a fixed mode with a more optimal dotclock, potentially
leading to reduced power consumption.
This approach works as long as userspace does the initial
allow_modeset=true commit using the highest refresh rate it will
want to use. Subsequent commits with allow_modeset=false can then
switch between lower refresh rates without blinks.
One remaining hurdle we may need to solve is the guardband length.
Assuming the highest refresh rate vblank is too short for
intel_vrr_compute_optimized_guardband() the intitial guardband will
match the highest refresh rate vblank. A subsequent switch to a lower
refresh rate will then recompute the guardband and select a value
that is higher (since the vblank will be longer). The mismatch in
guardband lengths will prevent the fastset. We may either have to
preserve the original (sub-optimal) guardband, or we'll have to
revisit the idea of changing the guardband without a full modeset.
Note that I'm not 100% happy with this solution because
intel_panel_fixed_mode() is no longer fully idempotent, but I wasn't
able to come up with anything truly better either :/ The simple
solution would be just to always pick the fixed mode with the highest
dotclock, but that could lead to increased power consumption even
when high refresh rates are never used.
Perhaps the proper solution would be to just deprecate this
idea of taking in random modes for internal panels and then
cooking up a compatible fixed modes. Life would be easier if
userspace was required to provide the desired fixed mode directly.
But in order to do that we'd need to introduce new uapi properties
to control the pfit aspect of this, and we'd probably need a new
client cap to select between the old and new userspace behaviour.
Something to consider in the future...
v2: Rebase due to earlier changes to VRR fixed mode selection
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260622213602.7244-6-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Pass the full atomic state to intel_panel_compute_config(). We'll
need this for some upcoming VRR fastset tricks. And to accompany
full state we'll also need the crtc (or its state) as well.
v2: Rebase
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260623114130.7333-1-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Upcoming changes will need access to the full atomic state
in .compute_config(). Pass it in from the top.
Couple of the implementations already dug this out via the
crtc_state/conn_state->state pointer, but we don't want to
use that anywhere because it's a bit of a footgun by only
being valid during the early stages of the commit.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260622213602.7244-4-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Add a new mode matching flag DRM_MODE_MATCH_TIMINGS_VRR. This is
identical to DRM_MODE_MATCH_TIMINGS, except it requires the vsync
pulse to remain anchored to the end of vtotal, as opposed to the
start of the frame. VRR capable hardware can therefore treat
matching modes as just variants of the same mode with a different
vblank lengths.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260622213602.7244-3-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
