Split the VRR vs. fixed refresh rate fixed mode selection into two
completely separate stages. First try the VRR method, which will
only accept fixed modes that are in the VRR range and whose refresh
rate is equal or higher to the user's requested mode's refresh rate.
If the VRR method doesn't find anything we fall back to the fixed
refresh rate method of simply looking for the fixed mode with the
closest refresh rate to the user's request.
The main benefit is that we will only perform the VRR vtotal adjustment
on fixed modes that have equal or higher refresh rate to the user's
requested mode, thus we will never end up in a situation where we'd
have to shrink the fixed mode's vtotal. This avoids any risk of ending
up with a vtotal that is too short.
v2: Drop redundant intel_panel_fixed_mode() call (Ankit)
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260623114035.7185-1-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
smb2_set_sparse() converts every FSCTL_SET_SPARSE failure to false and
marks sparse support as broken for the share. Callers therefore report
EOPNOTSUPP even for errors such as ENOSPC or EACCES, and later sparse
operations remain disabled until the share is unmounted.
Return the SMB2 ioctl error directly. Set broken_sparse_sup only for
EOPNOTSUPP, which indicates that the server does not support the request.
Update smb3_punch_hole() to propagate the error returned by
smb2_set_sparse().
Fixes: 3d1a3745d8 ("Add sparse file support to SMB2/SMB3 mounts")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer.
Fixes: b24df3e30c ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, __reconnect_target_locked() prints the error pointer
'hostname' using PTR_ERR() and %ld, printing only the error code.
Fix this by using by using %pe to print the error symbolic code instead,
and remove PTR_ERR().
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
FALLOC_FL_ALLOCATE_RANGE identifies the default fallocate
allocation mode and is defined as zero.
Use the symbolic name instead of a literal zero in
smb3_fallocate() to make the mode dispatch clearer. This
does not change behavior.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server.
Cc: stable@vger.kernel.org
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In id_mode_to_cifs_acl(), aclflag was initialized to CIFS_ACL_DACL by default.
This forced the client to request setting the DACL even when only an ownership
(chown) or group (chgrp) change was being performed.
Let build_sec_desc() do the proper flag calculation by initializing aclflag
to 0. build_sec_desc() sets the appropriate bits (CIFS_ACL_OWNER, CIFS_ACL_GROUP,
or CIFS_ACL_DACL) depending on what actually changed. During ownership transfer,
CIFS_ACL_DACL is only set if replace_sids_and_copy_aces() actually replaces the
SIDs inside any of the DACL's ACEs.
If build_sec_desc() results in aclflag being 0 (meaning no changes were mapped),
exit early to avoid sending an empty security descriptor update to the server.
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the 'err' local variable in drm_fb_helper_hotplug_event() which
only stores a return value that is never used beyond the immediate
return statement. This simplifies the code without behavior changes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260602-dw-hdmi-qp-scramb-v7-1-445eb54ee1ed@collabora.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Since commit
f2ba877402 ("arm64: mm: Map the kernel data/bss read-only in the linear map")
the linear alias of the .data and .bss regions is remapped read-only
early during the boot. (Note that a subsequent patch to unmap this
region entirely was reverted just before the v7.2 merge window, and will
be brought back in an improved form for the v7.3 cycle)
Fuad reports that in some cases, the KVM init code may apply relocations
to variables that reside in .data, and does so via the linear map. This
means that remapping .data read-only beforehand is a bad idea, and
results in an early boot crash.
These variables in .data are only present when CONFIG_NVHE_EL2_DEBUG or
CONFIG_NVHE_EL2_TRACING are enabled, which is why it was not spotted in
testing.
So move the remap to mark_rodata_ro(), which is a reasonable place to
put this, and ensures that it happens much later during the boot. It
also means that rodata=off is now taken into account, and so the linear
alias will remain writable in that case.
Fixes: f2ba877402 ("arm64: mm: Map the kernel data/bss read-only in the linear map")
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Tested-by: Fuad Tabba <fuad.tabba@linux.dev>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
"fan-supply" already has a type and shouldn't have a type $ref. Drop the
$ref to fix the warning.
Fixes: 39dd85d924 ("dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU")
Link: https://patch.msgid.link/20260624133643.4146351-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting a warning
if it is not.
Fix this by annotating acpi_idle_lpi_enter(), the generic __weak
stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter()
with __cpuidle. This moves these functions into the '.cpuidle.text'
section, implicitly disabling ftrace instrumentation (notrace) along
this sensitive path and preventing trace-induced RCU warnings during
idle entry.
Fixes: a36a7fecfe ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: lihuisong@huawei.com
Link: https://patch.msgid.link/20260616072617.2272-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add bindings for the regulators found in the Spreadtrum/Unisoc SC2730
PMIC, used e.g. with the UMS512 and UMS9230 SoCs.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260620-sc2730-regulators-v6-1-bbd2db395231@abscue.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 97f7d3f9c9 ("ACPICA: Replace strncpy() with strscpy_pad() in
acpi_ut_safe_strncpy()") switched over the ACPICA code in the kernel to
using strscpy_pad() instead of a combination of strncpy() and manual
NUL-termination of the destination string, but it overlooked the fact
that tools also use the code in question and strscpy_pad() is not
defined in those builds.
Address that by using the original ACPICA code in non-kernel builds.
Fixes: 97f7d3f9c9 ("ACPICA: Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/79e9e913-0fb1-4110-804b-c3b5d0edafe4@kernel
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
[ rjw: Fixed up the number of added code lines ]
Link: https://patch.msgid.link/12923581.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The example DTS is tested in a wrapped node with address/size-cells=1,
thus reg had incorrect entry leading to dt_binding_check fails:
thermal/amlogic,thermal.example.dtb: temperature-sensor@20000 (amlogic,t7-thermal): reg: [[0, 131072], [0, 80]] is too long
Fixes: b1c8ccdbd4 ("dt-bindings: thermal: amlogic: Add support for T7")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260622100231.438435-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The @filter_np parameter descriptions in of_map_id() and of_map_msi_id()
contained the text '*filter_np' in prose. Docutils interprets a leading
'*' as the start of RST emphasis (italic), but finds no closing '*',
triggering:
Documentation/devicetree/kernel-api:11: ./drivers/of/base.c:2134:
WARNING: Inline emphasis start-string without end-string. [docutils]
Documentation/devicetree/kernel-api:11: ./drivers/of/base.c:2260:
WARNING: Inline emphasis start-string without end-string. [docutils]
Fix by wrapping '*filter_np' in double backticks (*filter_np) to
render it as an RST inline code literal, which is also the correct
kernel-doc convention for pointer expressions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606130111.ldC96rqf-lkp@intel.com/
Signed-off-by: Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260619-iommu_map_kdoc_fix-v1-1-9573e1cf30b3@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
fwnode_property_get_reference_args() should return -ENOENT when an out
of bound index is passed. An issue arised with the OF backend because
the OF API use signed indexes while the fwnode API use unsigned ones.
When an index value greater the INT_MAX was passed to the OF backend
it got casted to a negative value and it returned -EINVAL instead of
-ENOENT. This patch add a check to of_fwnode_get_reference_args() to
catch negative index before they are passed to the OF API and return
-ENOENT right away.
This issue appeared when the following pattern was used in the LED
subsystem:
index = fwnode_property_match_string(fwnode, "led-names", name)
led_node = fwnode_find_reference(fwnode, "leds", index);
Unlike the same pattern with the OF API, this pattern implicitly cast
the signed return value of fwnode_property_match_string() to an
unsigned index leading to the above issue with the OF backend. It can
be argued that the return value of fwnode_property_match_string()
should be checked separately, but I think there is value in supporting
such simple and straight to the point patterns.
Link: https://lore.kernel.org/linux-leds/aimVRwJPhlGxsIUj@tom-desktop/T/#mc43cbf7e0599991b56dd0d9680714d28d145fbc8
Cc: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260618152035.1600436-1-alban.bedel@lht.dlh.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Otherwise zone append commands will miss their integrity data. While
this works "fine" for auto-PI, it break file system PI and non-PI
metadata.
With this XFS on ZNS namespace with non-PI metadata and 512 byte sectors
with PI work, while PI 4k sector formats with PI work only when Caleb's
"block: fix integrity offset/length conversions" is applied as well.
Note that unlike regular writes, zone append does need remapping as
partitions are not supported on zoned block devices.
Fixes: df3c485e0e ("block: switch on bio operation in bio_integrity_prep")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260624080014.1998650-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_integrity_alloc_buf usage of GFP_ flags is messed up. For one it
mixes GFP_NOFS and GFP_NOIO for neighbouring allocations, but it also
makes the allocations fail more often than needed. That code was copied
from bio_alloc_bioset which needs to do that so that it can punt to the
rescuer workqueue, but none of that is needed for the integrity
allocations that either sits in the file system or at the very bottom
of the I/O stack. Failing early means we'll do a fully waiting
allocation from the mempool ->alloc callback which is usually much
larger than required.
Fix this by passing a gfp_t so that the file system path can pass
GFP_NOFS and the auto-integrity code can pass GFP_NOIO, and don't
modify the allocation type except for disabling warnings.
Fixes: ec7f31b2a2 ("block: make bio auto-integrity deadlock safe")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260624080014.1998650-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Take a css reference under RCU, drop RCU, and then associate the bio with
the blkg. This avoids nesting queue_lock under RCU and prepares to protect
blkcg with blkcg_mutex instead of queue_lock.
Use css_tryget() instead of css_tryget_online() so swap writeback for
pages charged to a dying memcg still passes the dying css to
bio_associate_blkg_from_css(). That preserves the existing closest-live
ancestor fallback instead of charging those bios to the root blkg.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/c910d2c39d3ec97f67de68af636a52394342d55f.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The correct lock order is q->queue_lock before blkcg->lock, and in order
to prevent deadlock from blkcg_destroy_blkgs(), trylock is used for
q->queue_lock while blkcg->lock is already held, this is hacky.
Refactor blkcg_destroy_blkgs() to hold blkcg->lock only long enough to
get the first blkg and then release it. Then take q->queue_lock and
blkcg->lock in the correct order to destroy the blkg. This is a very cold
path, so the extra lock/unlock cycles are acceptable.
Also prepare to convert protecting blkcg with blkcg_mutex instead of
queue_lock.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/00b03cf74a9937cb4d6dd67a189ddc00a3de0451.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a bio is already associated with a blkg, the blkcg is already pinned
until the bio is done, so there is no need for RCU protection. Otherwise,
protect blkcg_css() with RCU independently. Prepare to protect blkcg with
blkcg_mutex instead of queue_lock.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/8496fa234b21d4b31b7f068766906d0bffcac8e6.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change this in two steps:
1) hold rcu lock and do blkg_lookup() from fast path;
2) hold queue_lock directly from slow path, and don't nest it under rcu
lock;
Prepare to convert protecting blkcg with blkcg_mutex instead of
queue_lock.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/93f33cc9e5a39dddb78dcd934d0c1d04b564fb00.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With previous modification to delay freeing policy data after an RCU grace
period, prfill() can run under RCU instead of taking queue_lock. However,
policy teardown can still clear blkg->pd[plid] after blkcg_print_blkgs()
observes the policy enabled bit.
Load policy data once with READ_ONCE() and skip the blkg if teardown
already cleared it. Do the same in recursive stat walks for descendant
blkgs. Remove the stale BFQ debug queue_lock assertion because
blkcg_print_blkgs() no longer calls prfill() with queue_lock held. This
also lets ioc_qos_prfill() and ioc_cost_model_prfill() use IRQ-safe
ioc->lock locking without re-enabling IRQs while queue_lock is still held.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/db7633d5e263dd1c2bf9b901762545a84b7d714e.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blkcg_print_blkgs() must hold RCU to iterate blkgs from a
blkcg, and prfill() must hold queue_lock to prevent policy data from
being freed by policy deactivation. As a consequence, queue_lock has to
be nested under RCU from blkcg_print_blkgs().
Delay freeing policy data until after an RCU grace period so prfill() can
be protected by RCU alone.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/e20e5d984b41a026d61851966bed35eb094c4bff.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_print_one_stat() will be called for each blkg:
- access blkg->iostat, which is freed from rcu callback
blkg_free_workfn();
- access policy data from pd_stat_fn(), which is freed from
pd_free_fn(), while pd_free_fn() can be called by removing blkcg or
deactivating policy;
Take blkcg->lock while iterating so the blkgs stay online and both
blkg->iostat and policy data for activated policies stay valid. Use
irq-safe locking because blkcg->lock can be nested under q->queue_lock,
which is used from IRQ completion paths.
Prepare to convert protecting blkgs from request_queue with mutex.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/05799877e720dcd300e2ddd4625e8e162959d7cc.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's still technically spring!
Perform spring cleaning on x86.{c,h} and asm/kvm_host.h, by adding regs.c
(the kvm_cache_regs.h => regs.h is already applied) and msrs.{c,h}, and moving
relevant code out of x86.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the majority of remaining KVM-internal declarations and defines in
kvm_host.h to x86.h, so that kvm_host.h only holds structure and function
definitions that need to be visible to arch-neutral KVM.
Land the emulator interfaces in x86.h, even though kvm_emulate.h *seems*
like a good home, as the interfaces and defines being moved are provided by
x86.c. I.e. keep kvm_emulate.h as an interface to the emulator proper.
Note, any "misses" are likely unintentional.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260613000329.732085-31-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move kvm_mmu_do_page_fault() into mmu.c, as there are no users outside of
mmu.c, and the function typically isn't inlined by the compiler anyways.
This will allow moving the EMULTYPE_xxx definitions into x86.h without
having to include x86.h in mmu_internal.h, i.e. will help preserve the
goal of making x86.h KVM x86's "top-level" include.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the implementation of kvm_arch_async_page_ready() "down" in mmu.c so
that it lives below kvm_tdp_page_fault(). This will allow moving
kvm_mmu_do_page_fault() into mmu.c without needing a forward declaration.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-29-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_arch_interrupt_allowed() to kvm_is_interrupt_allowed() and
change its return type to a boolean, as the purpose of the helper is purely
to check if interrupts are architecturally allowed. I.e. whether or not
interrupts are temporarily disallowed due a pending nested VM-Enter is
irrelevant (and callers are most definitely not supposed to care).
Opportunistically bury the helper in x86.c, as it hasn't been referenced by
arch-neutral code since commit a1b37100d9 ("KVM: Reduce runnability
interface with arch support code"), and has long since gained _very_
x86-specific semantics (see above).
Opportunistically add a comment to call out that treating -EBUSY as
"allowed" is intentional.
For all intents and purposes, no functional change intended (KVM treats
-EBUSY as "allowed" before and after).
Cc: Yosry Ahmed <yosry@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260613000329.732085-28-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When querying whether or not interrupts (IRQs) are allowed, check for a
pending nested run _after_ checking whether or not interrupts are blocked.
If L1 is running L2 _without_ nested_exit_on_intr(), i.e. if L1 IRQs can
be blocked while running L2, and interrupts will indeed be blocked once the
nested VM-Enter to L2 is completed, then KVM should treat interrupts as not
being allowed.
For injection, this avoids an unnecessary (forced) VM-Exit, as KVM can
immediately request an IRQ window, instead of forcing an exit and _then_
requesting an IRQ window (because after the forced exit, KVM will see that
interrupts are blocked).
For non-injection usage, only kvm_vcpu_ready_for_interrupt_injection() is
affected in practice. Barring KVM bugs or misbehaving userspace (at which
point all architectural guarantees are off), kvm_vcpu_has_events() is
unreachable when a nested run is pending. To reach kvm_vcpu_has_events(),
kvm_vcpu_running() needs to return false, i.e. vcpu->arch.mp_state needs
to be something other than RUNNABLE. If nested_run_pending is true, then
mp_state *must* be RUNNABLE (again barring bugs or stupid userspace),
because KVM shouldn't emulate VMRUN/VMLAUNCH/VMRESUME while the vCPU is
!RUNNABLE.
The one "near miss" is VMX's GUEST_ACTIVITY_STATE field, which allows L1 to
put the vCPU into HLT or WFS as part of nested VMLAUNCH/VMRESUME. However,
KVM clears nested_run_pending prior to calling kvm_emulate_halt_noskip()
when putting L2 into HLT via GUEST_ACTIVITY_HLT, and also clears the flag
before setting mp_state to INIT_RECEIVED. SVM has no equivalent to
GUEST_ACTIVITY_STATE.
I.e. the vCPU will always be runnable if a nested run is pending, and thus
kvm_arch_vcpu_runnable() => kvm_vcpu_has_events() is effectively dead code,
as is __kvm_emulate_halt() => kvm_vcpu_has_events(). Oh, and TDX doesn't
support nested VMX. Similarly, kvm_can_do_async_pf() is unreachable as
KVM shouldn't be faulting in memory with a pending nested VM-Enter.
As for kvm_vcpu_ready_for_interrupt_injection(), KVM's current behavior of
incorrectly treating interrupts as being allowed could result in KVM
prematurely exiting to userspace to accept an ExtINT. But, KVM will still
hold/block the ExtINT and request its own IRQ window. I.e. the net effect
is more or less the same as the for-injection case, the unnecessary exit
just happens at a different boundary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260613000329.732085-27-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of kvm_pv_send_ipi() into lapic.h, as its
implementation is provided by lapic.c (sending PV IPIs relies on the
optimized APIC map provided by the in-kernel local APIC), and it's only
used by KVM x86 code.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the function declaration for APIs to get/query pending IRQs from
kvm_host.h to irq.h, as the APIs are only used by KVM x86 code.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bury __kvm_irq_line_state() in CONFIG_KVM_IOAPIC=y code, as it's only used
by PIC and I/O APIC code.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move a variety of "VALID MASK" defines, e.g. that capture which flags in
a given ioctl are supported by KVM, from kvm_host.h to x86.c. The set of
valid flags/bits is very much a KVM-internal detail, as the values from the
hardcoded #defines are often captured and massaged by KVM's setup code, i.e.
*directly* using the macros outside of KVM x86 would be actively dangerous.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move kvm_{load,read}_ldt() into vmx.c, as vmx_{load,store}_ldt(), as they
are exclusively used by VMX to save/restore host state, and have no
business being globally visible.
Ideally, KVM-specific helpers wouldn't exist at all, as they are nothing
more than assembly wrappers for SLDT and LLDT, i.e. should be provided by
the kernel, not by KVM. Punt that cleanup to the future, as
arch/x86/include/asm/desc.h _does_ provide helpers, but load_ldt() is only
available for CONFIG_PARAVIRT_XXL=n builds, and both {load,store}_ldt()
unnecessarily constrain the operands to memory.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move a pile of MMU helper declarations and macros into mmu.h, as they are
very much KVM x86 internal APIs and details, and not intended to be exposed
to arch-neutral KVM, and certainly not to the broader kernel.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the definition of "struct kvm_x86_pmu_event_filter" to pmu.c, as the
as the details of the filters are very much implementation details that can
and should be buried in pmu.c. While the _existence_ of filters is public
knowledge, almost by definition, the contents don't need to be exposed
outside of the PMU code as the filter data is provided by userspace, i.e.
it pretty much has to be dynamically allocated, and thus never should be
fully embedded in a globally visible structure.
No functional change intended
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the definition of "struct kvm_x86_msr_filter" and its associate,
"struct msr_bitmap_range", to msrs.c, as the details of the filters are
very much implementation details that can and should be buried in msrs.c.
While the _existence_ of filters is public knowledge, almost by definition,
the contents don't need to be exposed outside of the MSR code as the filter
data is provided by userspace, i.e. it pretty much has to be dynamically
allocated, and thus never should be fully embedded in a globally visible
structure.
Note, this creates a discrepancy with the PMU event filter structure; that
will be remedied shortly.
No functional change intended.
Suggested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relocate declarations of MSR helpers (and kvm_nr_uret_msrs) from x86's
kvm_host.h to msrs, to continue trimming down kvm_host.h.
Deliberately leave the funky read_msr() where it is, as it will hopefully
be removed entirely as part of a broader kernel-API cleanup.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define kvm_{g,s}et_segment() as inline functions in regs.h, as they are
literally one-line wrappers to invoke vendor code.
No functional change intended.
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relocate declarations of Control/Debug Register, EFLAGS and RIP helpers
from x86's kvm_host.h to regs.h, to continue trimming down kvm_host.h.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce msrs.{c,h}, and move the vast majority of MSR specific code out
of x86.{c,h}. Use a plural "msrs" instead of just "msr" to be consistent
with regs.{c,h}, and to make it easier to differentiate KVM's code from the
other 5+ msr.c files in the kernel.
Opportunistically drop the "x86.h" include from mtrr.c, mostly as proof
that the bulk of the MSR code is indeed being relocated to msrs.c.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20260613000329.732085-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
