USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind.
Fixes: 9f2d3eae88 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Cc: stable@vger.kernel.org # 4.19
Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Enable rumble motor control on TGRIP-15E and TGRIP-15EX throttle grips
by sending haptic feedback commands (EV_FF events) to the input device.
Signed-off-by: Ivan Gorinov <linux-kernel@altimeter.info>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit d7db259bd6 ("HID: core: factor out hid_parse_collections()")
reworked collection parsing code and inadvertently allowed returning
"success" when parsing 0-sized reports where old code returned -EINVAL.
Restore the original behavior by doing an explicit check.
Note that the error message now differs from the generic "item fetching
failed at offset %u/%u" that is now used only for non-empty descriptors.
Fixes: d7db259bd6 ("HID: core: factor out hid_parse_collections()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When the Huawei CD30 USB keyboard undergoes 500 reboot cycles,
initialization may fail due to a report descriptor problem.
The error log is as follows:
[pid:175,cpu0,kworker/0:1,6]usb 1-1.2.2: new low-speed USB device number 6 using xhci-hcd
[pid:175,cpu0,kworker/0:1,9]usb 1-1.2.2: New USB device found, idVendor=12d1, idProduct=109b, bcdDevice= 1.03
[pid:175,cpu0,kworker/0:1,0]usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[pid:175,cpu0,kworker/0:1,1]usb 1-1.2.2: Product: HUAWEI USB Wired Keyboard
[pid:175,cpu0,kworker/0:1,2]usb 1-1.2.2: Manufacturer: HUAWEI
[pid:175,cpu0,kworker/0:1,4]input: HUAWEI HUAWEI USB Wired Keyboard as /devices/platform/efc00000.hisi_usb/efc00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:12D1:109B.0002/input/input6
[pid:175,cpu0,kworker/0:1,5]hid-generic 0003:12D1:109B.0002: input,hidraw1: USB HID v1.10 Keyboard [HUAWEI HUAWEI USB Wired Keyboard] on usb-xhci-hcd.1.auto-1.2.2/input0
[pid:175,cpu0,kworker/0:1,9]hid-generic 0003:12D1:109B.0003: collection stack underflow
[pid:175,cpu0,kworker/0:1,0]hid-generic 0003:12D1:109B.0003: item 0 0 0 12 parsing failed
[pid:175,cpu0,kworker/0:1,1]hid-generic: probe of 0003:12D1:109B.0003 failed with error -22
...
When encountering such a situation, fix it with the correct report descriptor.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The DualShock 4 HID driver fails to validate the num_touch_reports field
received from the device in both USB and Bluetooth input reports.
A malicious device could set this field to a value larger than the
allocated size of the touch_reports array (3 for USB, 4 for Bluetooth),
leading to an out-of-bounds read in dualshock4_parse_report().
This can result in kernel memory disclosure when processing malicious
HID reports.
Validate num_touch_reports against the array size for the respective
connection types before processing the touch data.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is no reason to build random drivers for obscure hardware into the
core kernel by default.
The usages of 'default !EXPERT' for the HID_PICOLCD suboptions are kept,
as these make some sense, although they probably should use 'default y'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
According to the ASIC design recommendations, the clock must be
disabled before operating the DLL to prevent glitches that could
affect the internal digital logic. In extreme cases, failing to
do so may cause the controller to malfunction completely.
Adds a step to disable the clock before DLL configuration and
re-enables it at the end.
Fixes: 08f3dff799 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scoped for-each loop when iterating over device nodes to simplify the
code, but also to ensure the device node reference is automatically
released when the loop scope ends.
Signed-off-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The 2025 extensions add FEAT_SME2P3, including LUT6.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The 2025 extensions add FEAT_SVE2P3 and FEAT_SVE_B16MM.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The 2025 extensions add FEAT_F16MM and adjust some of the RES0 bits to be
RAZ instead as a placeholder for future extensions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The 2025 extensions update the LUT field for new instructions added by
SVE and SME 2.3, there is no separate FEAT_ feature for these.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The 2025 extensions add FEAT_F16F32DOT and FEAT_F16F32MM.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently for each hwcap we define both the HWCAPn_NAME definition which is
exposed to userspace and a kernel internal KERNEL_HWCAP_NAME definition
which we use internally. This is tedious and repetitive, instead use a
script to generate the KERNEL_HWCAP_ definitions from the UAPI definitions.
No functional changes intended.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ioc_count won't be more than MMC_IOC_MAX_CMDS (255), retries won't be more
than MMC_NO_RETRIES (6), flags is newly introduced and uses only 1 bit.
Therefore let's change them all to become u8.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them.
Fixes: dc3c78e434 ("HID: usbhid: Check HID report descriptor contents after device reset")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier.
Cc: stable@vger.kernel.org
Fixes: 2075bbe8ef ("RDMA/ionic: Register device ops for miscellaneous functionality")
Link: https://patch.msgid.link/r/CALynFi7NAbhDCt1tdaDbf6TnLvAqbaHa6-Wqf6OkzREbA_PAfg@mail.gmail.com
Signed-off-by: Kai Aizen <kai.aizen.dev@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some users reported that upon suspending their keyboard backlight
remained on. Fix this by adding the missing LED_CORE_SUSPENDRESUME flag.
Cc: stable@vger.kernel.org
Fixes: 394ba612f9 ("HID: apple: Add support for magic keyboard backlight on T2 Macs")
Fixes: 9018eacbe6 ("HID: apple: Add support for keyboard backlight on certain T2 Macs.")
Reported-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Tested-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech Bolt receiver once connected to a wireless device will
generate data on interface 2. If this data isn't polled, when the USB
port it is connected to gets suspended (and if that happens within 5
minutes of the last input from the wireless device), it will trigger a
remote wakeup 3 seconds later, which will result in a spurious system
wakeup if the port was suspended as part of system sleep.
Set the ALWAYS_POLL quirk for this device to ensure interface 2 is
always polled and this spurious wakeup never happens.
With this change in place the system can be suspended with the receiver
plugged in and the system can be woken up when an input is sent from the
wireless device.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit ecfa6f3449 ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b5 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event.
Fixes: 73196ebe13 ("HID: alps: add support for Alps T4 Touchpad device")
Cc: stable <stable@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Masaki Ota <masaki.ota@jp.alps.com>
Cc: linux-input@vger.kernel.org
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- Fix regression introduced by the empty MMU gather fix in -rc7, where
the ->iotlb_sync() callback can be elided incorrectly, resulting in
boot failures (hangs), crashes and potential memory corruption.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmnXoB0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEYPB/9PODAbRMPNDY71T4WgY4lQigu/EtZmYJLF
xce6+BZOcfwWooQp74VlyB35C3NjtYGD/k+UenmSHtYIR65TOPzXoCtDRAt2XEN5
OxlA3vaCcx4EegG7RDUlzWk3w2WpjKwE7Q1GHZ3fWEb7Avz8sCNVZ1ofpVLTtGOw
P+JEjrp0AsryfcxNmtnMPscHXnJURlx366UqbiElBAeYtWonVJ5o0shOynn8W4cN
phy1b/GWsD7506n2LRuCBdEitf2x8TlSsfojVqhdvrJNS8ca9K7RE3omm9sg3QG4
rC3X29W5B1iyMH0GaPAr9RzCpOz49LVHgS3iNROflNTLAgtHHXqq
=5vWz
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull IOMMU fix from Will Deacon:
- Fix regression introduced by the empty MMU gather fix in -rc7, where
the ->iotlb_sync() callback can be elided incorrectly, resulting in
boot failures (hangs), crashes and potential memory corruption.
* tag 'iommu-fixes-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Ensure .iotlb_sync is called correctly
logi_dj_recv_send_report() assumes that all incoming REPORT_ID_DJ_SHORT
reports are 14 Bytes (DJREPORT_SHORT_LENGTH - 1) long. It uses that
assumption to load the associated field's 'value' array with 14 Bytes of
data. However, if a malicious user only sends say 1 Byte of data,
'report_count' will be 1 and only 1 Byte of memory will be allocated to
the 'value' Byte array. When we come to populate 'value[1-13]' we will
experience an OOB write.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since we will need to differentiate between the two report_enum types
soon, let's unify the naming conventions now to save confusion and/or
unnecessary/unrelated changes in upcoming commits.
{input,output}_report_enum is used in other places to let's conform.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
New HW Support and Fixes:
- amd/pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
- asus-armoury: Add support for FA607NU, GU605MU, and GV302XU.
- intel-uncore-freq: Handle autonomous UFS status bit
- ISST: Handle cases with less than max buckets correctly
- intel-uncore-freq & ISST: Mark minor version 3 supported (no additional
driver changes required)
The following is an automated shortlog grouped by driver:
amd: pmc:
- Add Thinkpad L14 Gen3 to quirk_s2idle_bug
asus-armoury:
- add support for FA607NU
- add support for GU605MU
- add support for GV302XU
intel-uncore-freq:
- Handle autonomous UFS status bit
- Increase minor version
ISST:
- Increase minor version
- Reset core count to 0
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCadeRLQAKCRBZrE9hU+XO
MUZcAP4zQhma28s27tvEW1vgiwXN+DkasYw2ujLpvbYuRIGAawEAnPnAlQD27btE
mN1VbuaQ0NTXpfURaHFW9M8n4u56hAE=
=KAhE
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
- asus-armoury: Add support for FA607NU, GU605MU, and GV302XU.
- intel-uncore-freq: Handle autonomous UFS status bit
- ISST: Handle cases with less than max buckets correctly
- intel-uncore-freq & ISST: Mark minor version 3 supported (no
additional driver changes required)
* tag 'platform-drivers-x86-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-armoury: add support for GU605MU
platform/x86: asus-armoury: add support for FA607NU
platform/x86: asus-armoury: add support for GV302XU
platform/x86/amd: pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
platform/x86/intel-uncore-freq: Increase minor version
platform/x86: ISST: Increase minor version
platform/x86/intel-uncore-freq: Handle autonomous UFS status bit
platform/x86: ISST: Reset core count to 0
This commit updates the hid-sony module description to make it correct
with the recent hid-sony changes alongside making it more consistent.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Without this bounds check, this might otherwise overwrite index -1.
Triggering this condition requires action both from the USB device and from
userspace, which reduces the scenarios in which it can be exploited.
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Günther Noack <gnoack@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
dst_fetch_ha() checks nud_state without holding the neighbor lock, then
copies ha under the seqlock. A race in __neigh_update() where nud_state
is set to NUD_REACHABLE before ha is written allows dst_fetch_ha() to
read a zero MAC address while the seqlock reports no concurrent writer.
netevent_callback amplifies this by waking ALL pending addr_req workers
when ANY neighbor becomes NUD_VALID. At scale (N peers resolving ARP
concurrently), the hit probability scales as N^2, making it near-certain
for large RDMA workloads.
N(A): neigh_update(A) W(A): addr_resolve(A)
| [sleep]
| write_lock_bh(&A->lock) |
| A->nud_state = NUD_REACHABLE |
| // A->ha is still 0 |
| [woken by netevent_cb() of
| another neighbour]
| | dst_fetch_ha(A)
| | A->nud_state & NUD_VALID
| | read_seqbegin(&A->ha_lock)
| | snapshot = A->ha /* 0 */
| | read_seqretry(&A->ha_lock)
| | return snapshot
| seqlock(&A->ha_lock)
| A->ha = mac_A /* too late */
| sequnlock(&A->ha_lock)
| write_unlock_bh(&A->lock)
The incorrect/zero mac is read and programmed in the device QP while it
was not yet updated. This causes silent packet loss and eventual
RETRY_EXC_ERR.
Fix by holding the neighbor read lock across the nud_state check and
ha copy in dst_fetch_ha(), ensuring it synchronizes with
__neigh_update() which is updating while holding the write lock.
Cc: stable@vger.kernel.org
Fixes: 92ebb6a0a1 ("IB/cm: Remove now useless rcu_lock in dst_fetch_ha")
Link: https://patch.msgid.link/r/20260405-fix-dmac-race-v1-1-cfa1ec2ce54a@nvidia.com
Signed-off-by: Chen Zhao <chezhao@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
By definition, EFI memory regions of type boot services code or data
have no special significance to the firmware at runtime, only to the OS.
In some cases, the firmware will allocate tables and other assets that
are passed in memory in regions of this type, and leave it up to the OS
to decide whether or not to treat the allocation as special, or simply
consume the contents at boot and recycle the RAM for ordinary use. The
reason for this approach is that it avoids needless memory reservations
for assets that the OS knows nothing about, and therefore doesn't know
how to free either.
This means that any memblock reservations covering such regions can be
marked as MEMBLOCK_RSRV_KERN - this is a better match semantically, and
is useful on x86 to distinguish true reservations from temporary
reservations that are only needed to work around firmware bugs.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Permit existing memblock reservations to be marked as RSRV_KERN. This
will be used by the EFI code on x86 to distinguish between reservations
of boot services data regions that have actual significance to the
kernel and regions that are reserved temporarily to work around buggy
firmware.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
jbd2_inode fields are updated under journal->j_list_lock, but some paths
read them without holding the lock (e.g. fast commit helpers and ordered
truncate helpers).
READ_ONCE() alone is not sufficient for the dirty range fields when they
are stored as loff_t because 32-bit platforms can observe torn loads.
Store the dirty range in PAGE_SIZE units as pgoff_t instead.
Represent the dirty range end as an exclusive end page. This avoids a
special sentinel value and keeps MAX_LFS_FILESIZE on 32-bit representable.
Publish a new dirty range by updating end_page before start_page, and
treat start_page >= end_page as empty in the accessor for robustness.
Use READ_ONCE() on the read side and WRITE_ONCE() on the write side for the
dirty range and i_flags to match the existing lockless access pattern.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-5-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ocfs2 journal commit callback reads jbd2_inode dirty range fields without
holding journal->j_list_lock.
Use jbd2_jinode_get_dirty_range() to get the range in bytes.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-4-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 journal commit callbacks access jbd2_inode dirty range fields without
holding journal->j_list_lock.
Use jbd2_jinode_get_dirty_range() to get the range in bytes, and read
i_transaction with READ_ONCE() in the redirty check.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-3-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide a helper to fetch jinode dirty ranges in bytes. This lets
filesystem callbacks avoid depending on the internal representation,
preparing for a later conversion to page units.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-2-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The histogram documentation describes the old method of the histogram
triggers using the fn() field of the histogram field structure to process
the field. But due to Spectre mitigation, the function pointer to handle
the fields at runtime caused a noticeable overhead. It was converted over
to a fn_num and hist_fn_call() is now used to call the specific functions
for the fields via a switch statement based on the field's fn_num value.
Update the documentation to reflect this change.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260126181742.03e8f0d5@gandalf.local.home>
Auditing the jbd2 codebase reveals several legacy J_ASSERT calls
that enforce internal state machine invariants (e.g., verifying
jh->b_transaction or jh->b_next_transaction pointers).
When these invariants are broken, the journal is in a corrupted
state. However, triggering a fatal panic brings down the entire
system for a localized filesystem error.
This patch targets a specific class of these asserts: those
residing inside functions that natively return integer error codes,
booleans, or error pointers. It replaces the hard J_ASSERTs with
WARN_ON_ONCE to capture the offending stack trace, safely drops
any held locks, gracefully aborts the journal, and returns -EINVAL.
This prevents a catastrophic kernel panic while ensuring the
corrupted journal state is safely contained and upstream callers
(like ext4 or ocfs2) can gracefully handle the aborted handle.
Functions modified in fs/jbd2/transaction.c:
- jbd2__journal_start()
- do_get_write_access()
- jbd2_journal_dirty_metadata()
- jbd2_journal_forget()
- jbd2_journal_try_to_free_buffers()
- jbd2_journal_file_inode()
Signed-off-by: Milos Nikic <nikic.milos@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20260304172016.23525-3-nikic.milos@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_journal_get_create_access(), if the caller passes an unlocked
buffer, the code currently triggers a fatal J_ASSERT.
While an unlocked buffer here is a clear API violation and a bug in the
caller, crashing the entire system is an overly severe response. It brings
down the whole machine for a localized filesystem inconsistency.
Replace the J_ASSERT with a WARN_ON_ONCE to capture the offending caller's
stack trace, and return an error (-EINVAL). This allows the journal to
gracefully abort the transaction, protecting data integrity without
causing a kernel panic.
Signed-off-by: Milos Nikic <nikic.milos@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20260304172016.23525-2-nikic.milos@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add documentation for the Xen hypervisor sysctl controls in
/proc/sys/xen/balloon/.
Documents the hotplug_unpopulated tunable (available when
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is enabled) which controls
whether unpopulated memory regions are automatically hotplugged
when the Xen balloon driver needs to reclaim memory.
The documentation is based on source code analysis of
drivers/xen/balloon.c.
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260304150419.16738-1-chakrabortyshubham66@gmail.com>
The if-else ladder in ext4_mb_normalize_request() manually rounds up
the preallocation size to the next power of two for files up to 1MB,
enumerating each step from 16KB to 1MB individually. Replace this with
a single roundup_pow_of_two() call clamped to a 16KB minimum, which
is functionally equivalent but much more concise.
Also replace raw byte constants with SZ_1M and SZ_16K from
<linux/sizes.h> for clarity, and remove the stale "XXX: should this
table be tunable?" comment that has been there since the original
mballoc code.
No functional change.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Weixie Cui <cuiweixie@gmail.com>
Link: https://patch.msgid.link/tencent_E9C5F1B2E9939B3037501FD04A7E9CF0C407@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The '\' line continuation character in this long URL
doesn't help anything. There is no documentation tooling that
handles the line continuation character to join the 2 lines
to make a usable URL. Web browsers terminate the URL just
before the '\' character so that the second line of the URL
is lost. See:
https://docs.kernel.org/hid/intel-ish-hid.html
Join the 2 lines together so that the URL is usable.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260321230934.435020-1-rdunlap@infradead.org>
A series of patches such as commit 60a70e6143 ("mm: Use
folio_next_pos()") replace folio_pos() + folio_size() by
folio_next_pos(). The former performs x << z + y << z while
the latter performs (x + y) << z, which is slightly more
efficient. This case was not taken into account, perhaps
because the argument is not named folio.
The change was performed using the following Coccinelle
semantic patch:
@@
expression folio;
@@
- folio_pos(folio) + folio_size(folio)
+ folio_next_pos(folio)
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260222125049.1309075-1-Julia.Lawall@inria.fr
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
alc269_resume() has an extra code to write GPIO data, but this is
basically already done in the standard alc_init(), hence it's
superfluous. Let's drop the code.
Since all external callers of alc_write_gpio_data() are gone after
this, fold the only usage of alc_write_gpio_data() into the caller and
drop the export as well.
Link: https://patch.msgid.link/20260409143735.1412134-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Feaulle Rainbow is a wired USB-C dynamic in-ear monitor (IEM) featuring
active noise cancellation (ANC).
The supported sample rates are 48000Hz and 96000Hz at 16bit or 24bit,
but it does not support reading the current sample rate and results in
an error message printed to kmsg. Set QUIRK_FLAG_GET_SAMPLE_RATE to skip
the sample rate check.
Its playback mixer reports val = -15360/0/128. Setting -15360 (-60dB)
mutes the playback, so QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE is needed.
Add a quirk table entry matching VID/PID=0x0e0b/0xfa01 and applying
the mentioned quirk flags, so that it can work properly.
Quirky device sample:
usb 7-1: New USB device found, idVendor=0e0b, idProduct=fa01, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: Feaulle Rainbow
usb 7-1: Manufacturer: Generic
usb 7-1: SerialNumber: 20210726905926
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260409-feaulle-rainbow-v1-1-09179e09000d@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit ab0e7f2076 ("Documentation: Merge x86-specific boot options doc
into kernel-parameters.txt") introduced a formatting regression where
architecture tags were placed on separate lines with broken indentation.
This caused the 'nopt' [X86] parameter to appear as if it belonged to
the [PPC/POWERNV] section.
Furthermore, since the main 'iommu=' parameter heading already specifies
it is for [X86, EARLY], the subsequent standalone [X86] tags for 'pt',
'nopt', and the AMD GART options are redundant and clutter the
documentation.
Clean up the formatting by removing these redundant tags and properly
attributing the 'nobypass' option to [PPC/POWERNV].
Fixes: ab0e7f2076 ("Documentation: Merge x86-specific boot options doc into kernel-parameters.txt")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260330105957.2271-1-lirongqing@baidu.com>
Since commit a7ba36bc94 ("ext4: fix fast commit alignment issues"),
both ext4_fc_replay_add_range and ext4_fc_replay_del_range get
ex based on 'val' instead of 'tl'.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260121063805.19863-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
i_fc_wait is only initialized in ext4_fc_init_inode() and never used for
waiting or wakeups. Drop it.
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260120121941.144192-1-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While it is true that each PE/COFF runtime driver in memory can
generally be split into 3 different regions (the header, the code/rodata
region and the data/bss region), each with different permissions, it
does not mean that 3x the size of the memory map is a suitable upper
bound. This is due to the fact that all runtime drivers could be
coalesced into a single EFI runtime code region by the firmware, and if
the firmware does a good job of keeping the fragmentation down, it is
conceivable that the memory attributes table has more entries than the
EFI memory map itself.
So instead, base the sanity check on whether the descriptor size matches
the EFI memory map's descriptor size closely enough (which is not
mandated by the spec but extremely unlikely to differ in practice), and
whether the size of the whole table does not exceed 64k entries.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The yield_task description referenced the long-removed compat_yield
sysctl and described the function as a dequeue/enqueue cycle. Update
it to reflect current behavior: yielding the CPU by moving the
current task's position back in the runqueue.
Sync zh_CN and sp_SP translations.
Signed-off-by: fangqiurong <fangqiurong@kylinos.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260403055806.358921-1-user@fqr-pc>
Web links in the documentation are not properly displayed.
In the man pages web links look like:
Osnoise tracer documentation: < <https://www.kernel.org/doc/html/lat‐
est/trace/osnoise-tracer.html> >
On web pages the URL caption is the URL itself.
Convert tracer documentation links to RST anonymous hyperlink format
for better rendering. Use newer docs.kernel.org instead of
www.kernel.org/doc/html/latest for brevity.
After the change, the links in the man pages look like:
Osnoise tracer <https://docs.kernel.org/trace/osnoise-tracer.html>
On web pages the captions are the titles of the links.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260405163847.3337981-1-costa.shul@redhat.com>
