Implement .alloc_mw() and .dealloc_mw() for mana device.
This is just the basic infrastructure, MW is not practically usable until
additional kernel support for allowing user space to submit MW work
requests is completed.
Link: https://patch.msgid.link/r/20260331090851.2276205-1-kotaranov@linux.microsoft.com
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A NS will always have a head pointer, so drop the check. As proof in
practice, all the nvme_mpath_clear_current_path() callers also
dereference ns->head.
This check has endured since the original changes to support multipath.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The firmware for Samsung 970 Evo Plus / PM981 / PM983 does not support SUBNQN.
Make quirks to suppress warnings.
# nvme id-ctrl /dev/nvme1n1
NVME Identify Controller:
vid : 0x144d
ssvid : 0x144d
sn : ***
mn : Samsung SSD 970 EVO Plus 500GB
fr : 2B2QEXM7
mcdqpc : 0
subnqn :
ioccsz : 0
Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes.
Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver")
Cc: stable@vger.kernel.org
Reported-by: Shivam Kumar <skumar47@syr.edu>
Tested-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
rxe_rcv() currently checks only that the incoming packet is at least
header_size(pkt) bytes long before payload_size() is used.
However, payload_size() subtracts both the attacker-controlled BTH pad
field and RXE_ICRC_SIZE from pkt->paylen:
payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt)
- RXE_ICRC_SIZE
This means a short packet can still make payload_size() underflow even
if it includes enough bytes for the fixed headers. Simply requiring
header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a
packet with a forged non-zero BTH pad can still leave payload_size()
negative and pass an underflowed value to later receive-path users.
Fix this by validating pkt->paylen against the full minimum length
required by payload_size(): header_size(pkt) + bth_pad(pkt) +
RXE_ICRC_SIZE.
Cc: stable@vger.kernel.org
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://patch.msgid.link/r/20260401121907.1468366-1-hkbinbinbin@gmail.com
Signed-off-by: hkbinbin <hkbinbinbin@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When delayed block allocation fails (e.g., due to filesystem corruption
detected in ext4_map_blocks()), the writeback error handler calls
mpage_release_unused_pages(invalidate=true) which invalidates affected
folios by clearing their uptodate flag via folio_clear_uptodate().
However, these folios may still be mapped in process page tables. If a
subsequent operation (such as ftruncate calling ext4_block_truncate_page)
triggers a write fault, the existing page table entry allows access to
the now-invalidated folio. This leads to ext4_page_mkwrite() being called
with a non-uptodate folio, which then gets marked dirty, triggering:
WARNING: CPU: 0 PID: 5 at mm/page-writeback.c:2960
__folio_mark_dirty+0x578/0x880
Call Trace:
fault_dirty_shared_page+0x16e/0x2d0
do_wp_page+0x38b/0xd20
handle_pte_fault+0x1da/0x450
The sequence leading to this warning is:
1. Process writes to mmap'd file, folio becomes uptodate and dirty
2. Writeback begins, but delayed allocation fails due to corruption
3. mpage_release_unused_pages(invalidate=true) is called:
- block_invalidate_folio() clears dirty flag
- folio_clear_uptodate() clears uptodate flag
- But folio remains mapped in page tables
4. Later, ftruncate triggers ext4_block_truncate_page()
5. This causes a write fault on the still-mapped folio
6. ext4_page_mkwrite() is called with folio that is !uptodate
7. block_page_mkwrite() marks buffers dirty
8. fault_dirty_shared_page() tries to mark folio dirty
9. block_dirty_folio() calls __folio_mark_dirty(warn=1)
10. WARNING triggers: WARN_ON_ONCE(warn && !uptodate && !dirty)
Fix this by unmapping folios from page tables before invalidating them
using unmap_mapping_pages(). This ensures that subsequent accesses
trigger new page faults rather than reusing invalidated folios through
stale page table entries.
Note that this results in data loss for any writes to the mmap'd region
that couldn't be written back, but this is expected behavior when
writeback fails due to filesystem corruption. The existing error message
already states "This should not happen!! Data will be lost".
Reported-by: syzbot+b0a0670332b6b3230a0a@syzkaller.appspotmail.com
Tested-by: syzbot+b0a0670332b6b3230a0a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0a0670332b6b3230a0a
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20251205055914.1393799-1-kartikey406@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace "an a few" with "and a few" in
Documentation/driver-api/media/drivers/zoran.rst.
Signed-off-by: Gleb Golovko <gaben123001@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260407212818.925-1-gaben123001@gmail.com>
fwnode_property_get_reference_args() now returns -ENOTCONN when called
on a software node referencing another software node which has not yet
been registered as a firmware node. It makes sense to defer probe in this
situation as the node will most likely be registered later on and we'll
be able to resolve the reference eventually. Change the behavior of
swnode_find_gpio() to return -EPROBE_DEFER if the software node reference
resolution returns -ENOTCONN.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260407-swnode-unreg-retcode-v4-2-1b2f0725eb9c@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
These attributes are evaluated as c-string (passed to strcmp), but
NLA_STRING doesn't check for the presence of a \0 terminator.
Either this needs to switch to nla_strcmp() and needs to adjust printf fmt
specifier to not use plain %s, or this needs to use NLA_NUL_STRING.
As the code has been this way for long time, it seems to me that userspace
does include the terminating nul, even tough its not enforced so far, and
thus NLA_NUL_STRING use is the simpler solution.
Fixes: 30dc5e63d6 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Link: https://patch.msgid.link/r/20260330122742.13315-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
David Carlier says:
====================
net: lan966x: fix page_pool error handling and error paths
This series fixes error handling around the lan966x page pool:
1/3 adds the missing IS_ERR check after page_pool_create(), preventing
a kernel oops when the error pointer flows into
xdp_rxq_info_reg_mem_model().
2/3 plugs page pool leaks in the lan966x_fdma_rx_alloc() and
lan966x_fdma_init() error paths, now reachable after 1/3.
3/3 fixes a use-after-free and page pool leak in the
lan966x_fdma_reload() restore path, where the hardware could
resume DMA into pages already returned to the page pool.
====================
Link: https://patch.msgid.link/20260405055241.35767-1-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path.
Fixes: 89ba464fcf ("net: lan966x: refactor buffer reload function")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-4-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths.
Fixes: 11871aba19 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-3-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure.
Fixes: 11871aba19 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-2-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch removes the obsolete TODO comment regarding fan speed
presets in fan_write_cmd_speed. After discussion with the
maintainers, it was decided that fixed presets (low/medium/high)
are not suitable due to platform-specific variations.
Signed-off-by: Daniil Bulgar <bulgardaniil18@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260407190546.109900-1-bulgardaniil18@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It is a usual pattern in the kernel to make releasing functions be NULL-aware
so they become a no-op. This helps reducing unneeded checks in the code where
the given resource is optional.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260327102729.797254-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260408084501.1-dell-wmi-sysman-v2-pengpeng@iscas.ac.cn
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The rbtree backing kernfs directories is ordered by (hash, ns_id, name)
but kernfs_dir_pos() only searches by hash when seeking to a position
during readdir. When two nodes from different namespaces share the same
hash value, the binary search can land on a node in the wrong namespace.
The subsequent skip-forward loop walks rb_next() and may overshoot the
correct node, silently dropping an entry from the readdir results.
With the recent switch from raw namespace pointers to public namespace
ids as hash seeds, computing hash collisions became an offline operation.
An unprivileged user could unshare into a new network namespace, create
a single interface whose name-hash collides with a target entry in
init_net, and cause a victim's seekdir/readdir on /sys/class/net to miss
that entry.
Fix this by extending the rbtree search in kernfs_dir_pos() to also
compare namespace ids when hashes match. Since the rbtree is already
ordered by (hash, ns_id, name), this makes the seek land directly in the
correct namespace's range, eliminating the wrong-namespace overshoot.
Signed-off-by: Christian Brauner <brauner@kernel.org>
kernfs uses the namespace tag as both a hash seed (via init_name_hash())
and a comparison key in the rbtree. The resulting hash values are exposed
to userspace through directory seek positions (ctx->pos), and the raw
pointer comparisons in kernfs_name_compare() encode kernel pointer
ordering into the rbtree layout.
This constitutes a KASLR information leak since the hash and ordering
derived from kernel pointers can be observed from userspace.
Fix this by using the 64-bit namespace id (ns_common::ns_id) instead of
the raw pointer value for both hashing and comparison. The namespace id
is a stable, non-secret identifier that is already exposed to userspace
through other interfaces (e.g., /proc/pid/ns/, ioctl NS_GET_NSID).
Introduce kernfs_ns_id() as a helper that extracts the namespace id from
a potentially-NULL ns_common pointer, returning 0 for the no-namespace
case.
All namespace equality checks in the directory iteration and dentry
revalidation paths are also switched from pointer comparison to ns_id
comparison for consistency.
Signed-off-by: Christian Brauner <brauner@kernel.org>
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Many drivers have no reason to use the iotlb_gather mechanism, but do
still depend on .iotlb_sync being called to properly complete an unmap.
Since the core code is now relying on the gather to detect when there
is legitimately something to sync, it should also take care of encoding
a successful unmap when the driver does not touch the gather itself.
Fixes: 90c5def10b ("iommu: Do not call drivers for empty gathers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/8800a38b-8515-4bbe-af15-0dae81274bf7@nvidia.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Will Deacon <will@kernel.org>
In removing IOMMU_CAP_DEFERRED_FLUSH, the below referenced commit
was over-eager in removing the return, resulting in the test for
IOMMU_CAP_CACHE_COHERENCY falling through to an irrelevant option.
Restore dropped return.
Fixes: 1c18a1212c ("iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain")
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
On HP OmniBook 7 the keyboard backlight and FnLock keys are handled
directly by the firmware. However, they still trigger WMI events which
results in "Unknown key code" warnings in dmesg.
Add these key codes to the keymap with KE_IGNORE to silence the warnings
since no software action is needed.
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221181
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260403080155.169653-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The function sysfs_match_string() can return negative error codes and
the variable assigned to it is the enum 'option'. Which could be an
unsigned int due to different compiler implementations.
Assign signed variable 'ret' to sysfs_match_string(), check for error,
then assign ret to option.
Detected by Smatch:
drivers/platform/x86/uniwill/uniwill-acpi.c:919 usb_c_power_priority_store()
warn: unsigned 'option' is never less than zero.
Fixes: 03ae0a0d09 ("platform/x86: uniwill-laptop: Implement USB-C power priority setting")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260403070928.802196-1-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Ensure the temp value has been properly parsed from the user-provided
buffer and initialized to be used in later operations. While at it,
prefer a convenient kstrtoul() helper.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: ad6ce87e5b ("[PATCH] dell_rbu: changes in packet update mechanism")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260403134240.604837-1-pchelkin@ispras.ru
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
Fixes: c656aa4c27 ("nfc: pn533: add UART phy driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hp_wmi_hwmon_priv.mode and .pwm are written by hp_wmi_hwmon_write() in
sysfs context and read by hp_wmi_hwmon_keep_alive_handler() in a
workqueue. A concurrent write and keep-alive expiry can observe an
inconsistent mode/pwm pair (e.g. mode=MANUAL with a stale pwm).
Add a mutex to hp_wmi_hwmon_priv protecting mode and pwm. Hold it in
hp_wmi_hwmon_write() across the field update and apply call, and in
hp_wmi_hwmon_keep_alive_handler() before calling apply.
In hp_wmi_hwmon_read(), only the pwm_enable path reads priv->mode; use
scoped_guard() there to avoid holding the lock across unrelated WMI
calls.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-6-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
gpu_delta was declared as u8. If the firmware specifies a GPU RPM
lower than the CPU RPM, subtracting them causes an underflow
(e.g. 10 - 20 = 246), which forces the GPU fan to remain clamped at
U8_MAX (100% speed) during operation.
Change gpu_delta to int and use signed arithmetic. Existing signed logic
in hp_wmi_fan_speed_set() correctly handles negative deltas.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-5-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, schedule_delayed_work() is used to queue the 90s keep-alive
timer. If a user manually changes the fan speed at T=85s,
schedule_delayed_work() leaves the existing timer in place as it is a
no-op if the work is already pending. This results in the keep-alive
timer firing unnecessarily at T=90s, just 5 seconds after the user
action.
Replace schedule_delayed_work() with mod_delayed_work() to reset the
90s timer whenever fan settings are applied. This guarantees a full 90s
delay after every user interaction, preventing redundant keep-alive
executions and improving efficiency.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-4-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_apply_fan_settings() uses cancel_delayed_work_sync() to stop
the keep-alive timer in AUTO mode. However, since
hp_wmi_apply_fan_settings() is also called from the keep-alive
handler, a race condition with a sysfs write can cause the handler to
wait on itself, leading to a deadlock.
Replace cancel_delayed_work_sync() with cancel_delayed_work() in
hp_wmi_apply_fan_settings() to avoid the self-flush deadlock.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-3-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_get_fan_count_userdefine_trigger() can fail, but its return
value was silently ignored in hp_wmi_apply_fan_settings() for
PWM_MODE_MAX/AUTO. Propagate these errors consistently.
Additionally, handle the return value of hp_wmi_apply_fan_settings()
in its callers by adding appropriate warnings on failure, and remove an
unreachable "return 0" at the end of the function.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-2-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the newly introduced memory-region-names to all occurences of
ti,*-r5f. This helps adding a name to each memory-region so it is
easier to see what memory regions are for.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Link: https://patch.msgid.link/20260318-topic-am62a-ioddr-dt-v6-19-v3-3-c41473cb23c3@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Extend the PMU test suite to cover overflow interrupts. The test enables
the PMI (Performance Monitor Interrupt), sets counter 0 to one less than
the overflow value, and verifies that an interrupt is raised when the
counter overflows. A guest interrupt handler checks the interrupt cause
and disables further PMU interrupts upon success.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce a basic PMU test that verifies hardware event counting for
four performance counters. The test enables the events for CPU cycles,
instructions retired, branch instructions, and branch misses, runs a
fixed number of loops, and checks that the counter values fall within
expected ranges. It also validates that the host supports PMU and that
the VM feature is enabled.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add helper macros and functions to read and write CPU configuration
registers (cpucfg) from the guest and from the VMM. This interface is
required in upcoming selftests for querying and setting CPU features,
such as PMU capabilities.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement irqfd that deliver msi to vCPU and vCPU dmsintc irq injection.
Add pch_msi_set_irq() choice dmsintc to set msi irq by the msg_addr and
implement dmsintc set msi irq.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add device model for DMSINTC interrupt controller, implement basic
create/destroy/set_attr interfaces, and register device model to kvm
device table.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
vcpu_is_preempted() is performance sensitive that called in function
osq_lock(), here make it as a macro. So that parameter is not parsed
at most time, it can avoid cache line thrashing across numa nodes.
Here is part of UnixBench result on Loongson-3C5000 DualWay machine with
32 cores and 2 numa nodes.
original inline macro
execl 7025.7 6991.2 7242.3
fstime 474.6 703.1 1071
From the test result, making vcpu_is_preempted() as a macro is the best,
and there is some improvment compared with the original function method.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CSR register LOONGARCH_CSR_GSTAT stores guest VMID information. With
existing implementation method, VMID is per vCPU, similar with ASID in
kernel. LOONGARCH_CSR_GSTAT is written at VM entry even if VMID is not
changed.
Here move LOONGARCH_CSR_GSTAT save/restore in vCPU context switch, and
update LOONGARCH_CSR_GSTAT only when VMID is updated at VM entry. At
most time VM enter/exit is much more frequent than vCPU thread context
switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CSR register LOONGARCH_CSR_EENTRY is shared between host CPU and guest
vCPU, KVM need save and restore LOONGARCH_CSR_EENTRY register. Here move
LOONGARCH_CSR_EENTRY saving in to context switch function rather than VM
entry.
At most time VM enter/exit is much more frequent than vCPU thread context
switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add kvm_request_pending() checking firstly in kvm_late_check_requests(),
at most time there is no pending request, then the following pending bit
checking can be skipped.
Also embed function kvm_check_pmu() in to kvm_late_check_requests(), and
put it after the kvm_request_pending() checking.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The function reads LOONGARCH_CSR_CRMD but uses CSR_PRMD_PPLV to
extract the privilege level. While both masks have the same value
(0x3), CSR_CRMD_PLV is the semantically correct constant for CRMD.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In an armv7 system that uses non-3G/1G split and with more than 512MB physical memory, driver load may fail with following error:
section 29 reloc 0 sym '': relocation 42 out of range (0xc2ab9be8 ->
0x7fad5998)
This happens when relocation R_ARM_PREL31 from the unwind section
.ARM.extab and .ARM.exidx are allocated from the VMALLOC space while
.text section is from MODULES_VADDR space. It exceeds the +/-1GB
relocation requirement of R_ARM_PREL31 hence triggers the error.
The fix is to mark .ARM.extab and .ARM.exidx sections as executable so
they can be allocated along with .text section and always meet range
requirement.
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reject ADFS disc records with a zero zone count during boot block
validation, before the disc record is used.
When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...)
which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to
dm[-1], causing an out-of-bounds write before the allocated buffer.
adfs_validate_dr0() already rejects nzones != 1 for old-format
images. Add the equivalent check to adfs_validate_bblk() for
new-format images so that a crafted image with nzones == 0 is
rejected at probe time.
Found by syzkaller.
Fixes: f6f14a0d71 ("fs/adfs: map: move map-specific sb initialisation to map.c")
Signed-off-by: Bae Yeonju <iwasbaeyz@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Birger Koblitz says:
====================
r8152: Add support for the RTL8157 5Gbit USB Ethernet chip
Add support for the RTL8157, which is a 5GBit USB-Ethernet adapter
chip in the RTL815x family of chips.
The RTL8157 uses a different frame descriptor format, and different
SRAM/ADV access methods, plus offers 5GBit/s Ethernet, so support for these
features is added in addition to chip initialization and configuration.
The module was tested with an OEM RTL8157 USB adapter:
[25758.328238] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[25758.345565] usb 4-1: New USB device found, idVendor=0bda, idProduct=8157, bcdDevice=30.00
[25758.345585] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[25758.345593] usb 4-1: Product: USB 10/100/1G/2.5G/5G LAN
[25758.345599] usb 4-1: Manufacturer: Realtek
[25758.345605] usb 4-1: SerialNumber: 000300E04C68xxxx
[25758.534241] r8152-cfgselector 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[25758.603511] r8152 4-1:1.0: skip request firmware
[25758.653351] r8152 4-1:1.0 eth0: v1.12.13
[25758.689271] r8152 4-1:1.0 enx00e04c68xxxx: renamed from eth0
[25763.271682] r8152 4-1:1.0 enx00e04c68xxxx: carrier on
The RTL8157 adapter was tested against an AQC107 PCIe-card supporting
10GBit/s and an RTL8126 5Gbit PCIe-card supporting 5GBit/s for
performance, link speed and EEE negotiation. Using USB3.2 Gen 1 with
the RTL8157 USB adapter and running iperf3 against the AQC107 PCIe
card resulted in 3.47 Gbits/sec, whereas using USB3.2 Gen2 resulted
in 4.70 Gbits/sec, speeds against the RTL8126-card were the same.
As the code integrates the RTL8157-specific code with existing RTL8156 code
in order to improve code maintainability (instead of adding RTL8157-specific
functions duplicaing most of the RTL8156 code), regression tests were done
with an Edimax EU-4307 V1.0 USB-Ethernet adapter with RTL8156.
The code is based on the out-of-tree r8152 driver published by Realtek under
the GPL.
This patch is on top of linux-next as the code re-uses the 2.5 Gbit EEE
recently added in r8152.c.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
====================
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-0-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RTL8157 uses a different packet descriptor format compared to the
previous generation of chips. Add support for this format by adding a
descriptor format structure into the r8152 structure and corresponding
desc_ops functions which abstract the vlan-tag, tx/rx len and
tx/rx checksum algorithms.
Also, add support for the ADV indirect access interface of the RTL8157
and PHY setup.
For initialization of the RTL8157, combine the existing RTL8156B and
RTL8156 init functions and add RTL8157-specific functinality in order
to improve code readability and maintainability.
r8156_init() is now called with RTL_VER_10 and RTL_VER_11 for the RTL8156,
with RTL_VER_12, RTL_VER_13 and RTL_VER_15 for the RTL8156B and with
RTL_VER_16 for the RTL8157 and checks the version for chip-specific code.
Also add USB power control functions for the RTL8157.
Add support for the USB device ID of Realtek RTL8157-based adapters. Detect
the RTL8157 as RTL_VER_16 and set it up.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-2-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RTL8157 supports 5GBit Link speeds. Add support for this speed
in the setup and setting/getting through ethtool. Also add 5GBit EEE.
Add functionality for setup and ethtool get/set methods.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-1-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
