Convert existing tests from ASM to C, in prep for future changes to add
more comprehensive tests.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Don't reject usage of fixed unaligned offsets for syscall ctx. Tests
will be added in later commits. Unaligned offsets already work for
variable offsets.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow accessing PTR_TO_CTX with variable offsets in syscall programs.
Fixed offsets are already enabled for all program types that do not
convert their ctx accesses, since the changes we made in the commit
de6c7d99f8 ("bpf: Relax fixed offset check for PTR_TO_CTX"). Note
that we also lift the restriction on passing syscall context into
helpers, which was not permitted before, and passing modified syscall
context into kfuncs.
The structure of check_mem_access can be mostly shared and preserved,
but we must use check_mem_region_access to correctly verify access with
variable offsets.
The check made in check_helper_mem_access is hardened to only allow
PTR_TO_CTX for syscall programs to be passed in as helper memory. This
was the original intention of the existing code anyway, and it makes
little sense for other program types' context to be utilized as a memory
buffer. In case a convincing example presents itself in the future, this
check can be relaxed further.
We also no longer use the last-byte access to simulate helper memory
access, but instead go through check_mem_region_access. Since this no
longer updates our max_ctx_offset, we must do so manually, to keep track
of the maximum offset at which the program ctx may be accessed.
Take care to ensure that when arg_type is ARG_PTR_TO_CTX, we do not
relax any fixed or variable offset constraints around PTR_TO_CTX even in
syscall programs, and require them to be passed unmodified. There are
several reasons why this is necessary. First, if we pass a modified ctx,
then the global subprog's accesses will not update the max_ctx_offset to
its true maximum offset, and can lead to out of bounds accesses. Second,
tail called program (or extension program replacing global subprog) where
their max_ctx_offset exceeds the program they are being called from can
also cause issues. For the latter, unmodified PTR_TO_CTX is the first
requirement for the fix, the second is ensuring max_ctx_offset >= the
program they are being called from, which has to be a separate change
not made in this commit.
All in all, we can hint using arg_type when we expect ARG_PTR_TO_CTX and
make our relaxation around offsets conditional on it.
Drop coverage of syscall tests from verifier_ctx.c temporarily for
negative cases until they are updated in subsequent commits.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[Why]
e1000_set_eeprom() performs a read-modify-write operation when the write
range is not word-aligned. This requires reading the first and last words
of the range from the EEPROM to preserve the unmodified bytes.
However, the code does not check the return value of e1000_read_eeprom().
If the read fails, the operation continues using uninitialized data from
eeprom_buff. This results in corrupted data being written back to the
EEPROM for the boundary words.
Add the missing error checks and abort the operation if reading fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Co-developed-by: Iskhakov Daniil <dish@amicon.ru>
Signed-off-by: Iskhakov Daniil <dish@amicon.ru>
Signed-off-by: Agalakov Daniil <ade@amicon.ru>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9),
the XSK buffer pool is destroyed but NAPI polling continues.
igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing
napi_complete_done() from clearing NAPI_STATE_SCHED.
igb_down() calls napi_synchronize() before napi_disable() for each queue
vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear,
which never happens. igb_down() blocks indefinitely, the TX watchdog
fires, and the TX queue remains permanently stalled.
napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE.
After a full-budget poll, __napi_poll() checks napi_disable_pending(). If
set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop
that napi_synchronize() cannot.
napi_synchronize() was added in commit 41f149a285 ("igb: Fix possible
panic caused by Rx traffic arrival while interface is down").
napi_disable() provides stronger guarantees: it prevents further
scheduling and waits for any active poll to exit.
Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a
preceding napi_synchronize() in their down paths.
Remove redundant napi_synchronize() call and reorder napi_disable()
before igb_set_queue_napi() so the queue-to-NAPI mapping is only
cleared after polling has fully stopped.
Fixes: 2c6196013f ("igb: Add AF_XDP zero-copy Rx support")
Cc: stable@vger.kernel.org
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Alex Dvoretsky <advoretsky@gmail.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit a7075f501b ("ixgbevf: fix mailbox API compatibility by
negotiating supported features") added the .negotiate_features callback
to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot
to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL
on Hyper-V VMs.
During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(),
which unconditionally dereferences hw->mac.ops.negotiate_features().
On Hyper-V this results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...]
Workqueue: events work_for_cpu_fn
RIP: 0010:0x0
[...]
Call Trace:
ixgbevf_negotiate_api+0x66/0x160 [ixgbevf]
ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf]
ixgbevf_probe+0x20f/0x4a0 [ixgbevf]
local_pci_probe+0x50/0xa0
work_for_cpu_fn+0x1a/0x30
[...]
Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and
wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP
gracefully.
Fixes: a7075f501b ("ixgbevf: fix mailbox API compatibility by negotiating supported features")
Reported-by: Xiaoqiang Xiong <xxiong@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-155455
Assisted-by: Claude:claude-4.6-opus-high Cursor
Tested-by: Xiaoqiang Xiong <xxiong@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ixgbe_get_drvinfo() calls ixgbe_refresh_fw_version() on every ethtool
query for e610 adapters. That ends up in ixgbe_discover_flash_size(),
which bisects the full 16 MB NVM space issuing one ACI command per
step (~20 ms each, ~24 steps total = ~500 ms).
Profiling on an idle E610-XAT2 system with telegraf scraping ethtool
stats every 10 seconds:
kretprobe:ixgbe_get_drvinfo took 527603 us
kretprobe:ixgbe_get_drvinfo took 523978 us
kretprobe:ixgbe_get_drvinfo took 552975 us
kretprobe:ice_get_drvinfo took 3 us
kretprobe:igb_get_drvinfo took 2 us
kretprobe:i40e_get_drvinfo took 5 us
The half-second stall happens under the RTNL lock, causing visible
latency on ip-link and friends.
The FW version can only change after an EMPR reset. All flash data is
already populated at probe time and the cached adapter->eeprom_id is
what get_drvinfo should be returning. The only place that needs to
trigger a re-read is ixgbe_devlink_reload_empr_finish(), right after
the EMPR completes and new firmware is running. Additionally, refresh
the FW version in ixgbe_reinit_locked() so that any PF that undergoes a
reinit after an EMPR (e.g. triggered by another PF's devlink reload)
also picks up the new version in adapter->eeprom_id.
ixgbe_devlink_info_get() keeps its refresh call for explicit
"devlink dev info" queries, which is fine given those are user-initiated.
Fixes: c9e563cae1 ("ixgbe: add support for devlink reload")
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E825C SyncE support added in commit ad1df4f2d5 ("ice: dpll:
Support E825-C SyncE and dynamic pin discovery") introduced a SyncE
reconfiguration block in ice_ptp_link_change() that prevents
ice_ptp_port_phy_restart() from being called in several error paths.
Without the PHY restart, PTP timestamps stop working after any link
change event.
There are three ways the PHY restart gets blocked:
1. When DPLL initialization fails (e.g. missing ACPI firmware node
properties), ICE_FLAG_DPLL is not set and the function returns early
before reaching the PHY restart.
2. When ice_tspll_bypass_mux_active_e825c() fails to read the CGU
register, WARN_ON_ONCE fires and the function returns early.
3. When ice_tspll_cfg_synce_ethdiv_e825c() fails to configure the
clock divider for an active pin, same early return.
SyncE and PTP are independent features. SyncE reconfiguration failures
must not prevent the PTP PHY restart that is essential for timestamp
recovery after link changes.
Fix by making the entire SyncE block conditional on ICE_FLAG_DPLL
without an early return, and replacing the WARN_ON_ONCE + return error
handling inside the loop with dev_err_once + break. The function always
proceeds to ice_ptp_port_phy_restart() regardless of SyncE errors.
Fixes: ad1df4f2d5 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP.
Fixes: e800654e85 ("ice: Use ice_adapter for PTP shared data instead of auxdev")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Set the payload size before forwarding the reply to the async handler.
Without this, xn->reply_sz will be 0 and idpf_mac_filter_async_handler()
will never get past the size check.
Fixes: 34c21fa894 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Li Li <boolli@google.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Protect the set_bit() operation for the free_xn bitmask in
idpf_vc_xn_push_free(), to make the locking consistent with rest of the
code and avoid potential races in that logic.
Fixes: 34c21fa894 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org
Reported-by: Ray Zhang <sgzhang@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
kunit.py will attempt to catch SIGINT / ^C in order to ensure the TTY isn't
messed up, but never actually attempts to terminate the running kernel (be
it UML or QEMU). This can lead to a bit of frustration if the kernel has
crashed or hung.
Terminate the kernel process in the signal handler, if it's running. This
requires plumbing through the process handle in a few more places (and
having some checks to see if the kernel is still running in places where it
may have already been killed).
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/aaFmiAmg9S18EANA@smile.fi.intel.com/
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
run_kernel() cleanup and signal_handler() invoke stty unconditionally.
When stdin is not a tty (for example in CI or unit tests), this writes
noise to stderr.
Call stty only when stdin is a tty.
Add regression tests for these paths:
- run_kernel() with non-tty stdin
- signal_handler() with non-tty stdin
- signal_handler() with tty stdin
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If no KTAP header is found in the kernel output (e.g., because the kernel
crashed before the KUnit executor was run), it's very useful to re-run the
test with --raw_output=all, as that will show any error output (such as a
stacktrace, log message, BUG, etc). This is not particularly intuitive,
however, as --raw_output=all is not well known.
Add an extra log line to advertise --raw_output=all in this case, as it's
a terrible user experience to just get "Did any KUnit tests run?"
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, kunit.py allows listing all individual tests via --list_tests.
However, users often need to see only the available test suites.
Add --list_suites to show suites. This option parses the test list output
from the kernel and prints only the suite names.
Example of the output of --list_suites:
example_init
miscdev_init
printk-ringbuffer
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from
wbt_alloc() and wbt_init(). However, both are expected failure paths:
- wbt_alloc() can return NULL under memory pressure (-ENOMEM)
- wbt_init() can fail with -EBUSY if wbt is already registered
syzbot triggers this by injecting memory allocation failures during MTD
partition creation via ioctl(BLKPG), causing a spurious warning.
wbt_init_enable_default() is a best-effort initialization called from
blk_register_queue() with a void return type. Failure simply means the
disk operates without writeback throttling, which is harmless.
Replace WARN_ON_ONCE with plain if-checks, consistent with how
wbt_set_lat() in the same file already handles these failures. Add a
pr_warn() for the wbt_init() failure to retain diagnostic information
without triggering a full stack trace.
Reported-by: syzbot+71fcf20f7c1e5043d78c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71fcf20f7c1e5043d78c
Fixes: 41afaeeda5 ("blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter")
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://patch.msgid.link/20260316070358.65225-2-ytohnuki@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it.
Link: https://lkml.kernel.org/r/20260403063830.3662739-1-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: syzbot+62c1793956716ea8b28a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=62c1793956716ea8b28a
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_stat_start() always allocates the module's damon_ctx object
(damon_stat_context). Meanwhile, if damon_call() in the function fails,
the damon_ctx object is not deallocated. Hence, if the damon_call() is
failed, and the user writes Y to “enabled” again, the previously
allocated damon_ctx object is leaked.
This cannot simply be fixed by deallocating the damon_ctx object when
damon_call() fails. That's because damon_call() failure doesn't guarantee
the kdamond main function, which accesses the damon_ctx object, is
completely finished. In other words, if damon_stat_start() deallocates
the damon_ctx object after damon_call() failure, the not-yet-terminated
kdamond could access the freed memory (use-after-free).
Fix the leak while avoiding the use-after-free by keeping returning
damon_stat_start() without deallocating the damon_ctx object after
damon_call() failure, but deallocating it when the function is invoked
again and the kdamond is completely terminated. If the kdamond is not yet
terminated, simply return -EAGAIN, as the kdamond will soon be terminated.
The issue was discovered [1] by sashiko.
Link: https://lkml.kernel.org/r/20260402134418.74121-1-sj@kernel.org
Link: https://lore.kernel.org/20260401012428.86694-1-sj@kernel.org [1]
Fixes: 405f61996d ("mm/damon/stat: use damon_call() repeat mode instead of damon_callback")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 605f6586ec ("mm/vma: do not leak memory when .mmap_prepare
swaps the file") handled the success path by skipping get_file() via
file_doesnt_need_get, but missed the error path.
When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls
shmem_zero_setup_desc() which allocates a new shmem file to back the
mapping. If __mmap_new_vma() subsequently fails, this replacement
file is never fput()'d - the original is released by
ksys_mmap_pgoff(), but nobody releases the new one.
Add fput() for the swapped file in the error path.
Reproducible with fault injection.
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x164/0x1f0
should_fail_ex+0x525/0x650
should_failslab+0xdf/0x140
kmem_cache_alloc_noprof+0x78/0x630
vm_area_alloc+0x24/0x160
__mmap_region+0xf6b/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881118aca80 (size 360):
comm "syz.7.14", pid 366, jiffies 4294913255
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M.....
backtrace (crc db0f53bc):
kmem_cache_alloc_noprof+0x3ab/0x630
alloc_empty_file+0x5a/0x1e0
alloc_file_pseudo+0x135/0x220
__shmem_file_setup+0x274/0x420
shmem_zero_setup_desc+0x9c/0x170
mmap_zero_prepare+0x123/0x140
__mmap_region+0xdda/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by syzkaller.
Link: https://lkml.kernel.org/r/20260331180811.1333348-1-rhkrqnwk98@gmail.com
Fixes: 605f6586ec ("mm/vma: do not leak memory when .mmap_prepare swaps the file")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
N_NORMAL_MEMORY is initialized from zone population at boot, but memory
hotplug currently only updates N_MEMORY. As a result, a node that gains
normal memory via hotplug can remain invisible to users iterating over
N_NORMAL_MEMORY, while a node that loses its last normal memory can stay
incorrectly marked as such.
The most visible effect is that
/sys/devices/system/node/has_normal_memory does not report a node even
after that node has gained normal memory via hotplug.
Also, list_lru-based shrinkers can undercount objects on such a node
and may skip reclaim on that node entirely, which can lead to a higher
memory footprint than expected.
Restore N_NORMAL_MEMORY maintenance directly in online_pages() and
offline_pages(). Set the bit when a node that currently lacks normal
memory onlines pages into a zone <= ZONE_NORMAL, and clear it when
offlining removes the last present pages from zones <= ZONE_NORMAL.
This restores the intended semantics without bringing back the old
status_change_nid_normal notifier plumbing which was removed in
8d2882a8ed.
Current users that benefit include list_lru, zswap, nfsd filecache,
hugetlb_cgroup, and has_normal_memory sysfs reporting.
Link: https://lkml.kernel.org/r/20260330035941.518186-1-hao.li@linux.dev
Fixes: 8d2882a8ed ("mm,memory_hotplug: remove status_change_nid_normal and update documentation")
Signed-off-by: Hao Li <hao.li@linux.dev>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_call() for repeat_call_control of DAMON_SYSFS could fail if somehow
the kdamond is stopped before the damon_call(). It could happen, for
example, when te damon context was made for monitroing of a virtual
address processes, and the process is terminated immediately, before the
damon_call() invocation. In the case, the dyanmically allocated
repeat_call_control is not deallocated and leaked.
Fix the leak by deallocating the repeat_call_control under the
damon_call() failure.
This issue is discovered by sashiko [1].
Link: https://lkml.kernel.org/r/20260327003224.55752-1-sj@kernel.org
Link: https://lore.kernel.org/20260320020630.962-1-sj@kernel.org [1]
Fixes: 04a06b139e ("mm/damon/sysfs: use dynamically allocated repeat mode damon_call_control")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 64dd89ae01 ("mm/block/fs: remove laptop_mode") removed this
unconditional writeback start from balance_dirty_pages():
if (unlikely(!writeback_in_progress(wb)))
wb_start_background_writeback(wb);
This logic needs to be reinstated to prevent performance regressions for
strictlimited BDIs and memcg setups. The problem occurs because:
a) For strictlimited BDIs, throttling is calculated using per-wb
thresholds. The per-wb threshold can be exceeded even when the global
dirty threshold was not exceeded (nr_dirty < gdtc->bg_thresh)
b) For memcg-based throttling, memcg uses its own dirty count /
thresholds and can trigger throttling even when the global threshold
isn't exceeded
Without the unconditional writeback start, IO is throttled as it waits for
dirty pages to be written back but there is no writeback running. This
leads to severe stalls. On fuse, buffered write performance dropped from
1400 MiB/s to 2000 KiB/s.
Reinstate the unconditional writeback start so that writeback is
guaranteed to be running whenever IO needs to be throttled.
Link: https://lkml.kernel.org/r/20260326215127.3857682-2-joannelkoong@gmail.com
Fixes: 64dd89ae01 ("mm/block/fs: remove laptop_mode")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
luo_session_deserialize() ignored the return value from
luo_file_deserialize(). As a result, a session could be left partially
restored even though the /dev/liveupdate open path treats deserialization
failures as fatal.
Propagate the error so a failed file deserialization aborts session
deserialization instead of silently continuing.
Link: https://lkml.kernel.org/r/20260325044608.8407-1-leotimmins1974@gmail.com
Link: https://lkml.kernel.org/r/20260325044608.8407-2-leotimmins1974@gmail.com
Fixes: 16cec0d265 ("liveupdate: luo_session: add ioctls for file preservation")
Signed-off-by: Leo Timmins <leotimmins1974@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid 'nr_pages' calculation overflow. After this patch, the
crash issue is gone.
Link: https://lkml.kernel.org/r/1cf1ac59018fc647a87b0dad605d4056a71c14e4.1773739704.git.baolin.wang@linux.alibaba.com
Fixes: 743a2753a0 ("filemap: cap PTE range to be created to allowed zero fill in folio_map_range()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Tested-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Document ops.dequeue() in the sched_ext task lifecycle now that its
semantics are well-defined.
Also update the pseudo-code to use task_is_runnable() consistently and
clarify the case where ops.dispatch() does not refill the time slice.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_alloc_free_idx() zeroes the payload of a freed arena allocation
one word at a time. The loop bound was alloc->pool.elem_size / 8, but
elem_size includes sizeof(struct sdt_data) (the 8-byte union sdt_id
header). This caused the loop to write one extra u64 past the
allocation, corrupting the tid field of the adjacent pool element.
Fix the loop bound to (elem_size - sizeof(struct sdt_data)) / 8 so
only the payload portion is zeroed.
Test plan:
- Add a temporary sanity check in scx_task_free() before the free call:
if (mval->data->tid.idx != mval->tid.idx)
scx_bpf_error("tid corruption: arena=%d storage=%d",
mval->data->tid.idx, (int)mval->tid.idx);
- stress-ng --fork 100 -t 10 & sudo ./build/bin/scx_sdt
Without this fix, running scx_sdt under fork-heavy load triggers the
corruption error. With the fix applied, the same workload completes
without error.
Fixes: 36929ebd17 ("tools/sched_ext: add arena based scheduler")
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
nolibc should work without libgcc to be compatible with as many
toolchains as possible. Currently the functionality tested by
nolibc-test does not contain any dependencies, make sure it stays
this way by not linking libgcc anymore.
On the ppc target GCC always emits references to '_restgpr_' functions,
so keep linking libgcc there.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-libgcc-v1-1-eb3ecfe0e176@weissschuh.net
On some architectures without native division instructions
the division can generate calls into libgcc/compiler-rt.
This library might not be available, so its use should be avoided.
Use the compiler builtin to check for overflows without needing a
division. The builtin has been available since GCC 3 and clang 3.8.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-asprintf-v2-1-17d2d0df9763@weissschuh.net
NPEM registers LED classdevs on PCI endpoint that may be behind
hotplug-capable ports. During hot-removal, led_classdev_unregister() calls
led_set_brightness(LED_OFF) which leads to a PCI config read to a
disconnected device, which fails and returns -ENODEV (topology details in
msgid.link below):
leds 0003:01:00.0:enclosure:ok: Setting an LED's brightness failed (-19)
The LED core already suppresses this for devices with LED_HW_PLUGGABLE set,
but NPEM never sets it. Add the flag since NPEM LEDs are on hot-pluggable
hardware by nature.
Fixes: 4e893545ef ("PCI/NPEM: Add Native PCIe Enclosure Management support")
Signed-off-by: Richard Cheng <icheng@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Kai-Heng Feng <kaihengf@nvidia.com>
Link: https://patch.msgid.link/20260402093850.23075-1-icheng@nvidia.com
extern char *optarg and extern int optind, opterr, optopt are
already declared by <getopt.h>, which is included at the top of
the file. Repeating extern declarations inside a function body
is misleading and unnecessary.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The largest part here are devicetree fixes for Qualcomm, and NXP i.MX,
addressing a few regressions and incorrect settings in board and
SoC pecific dts files. The largest single commits are a revert of
a cleanup patch for i.MX that caused regressions for the NAND
flash controller and a fixup for an incomplete cleanup of the PCIe
controller on Qualcomm platforms that broke because the state was
left incompatible with both the old and new behavior.
On the Rockchips, Hisilicon, Renesas, Allwinner and AT91 platforms,
only a single simple dts bugfix each was added since the last round
of fixes.
On the SoC specific device drivers, everything is relatively harmless:
three reset controller driver fixes, a compatibility for fix ASpeed
soc ID, and error handling fixes for Qualcomm and Microchip. One
regression fix on Qualcomm addresses a problem with a previous fix
for DisplayPort alt mode.
-----BEGIN PGP SIGNATURE-----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=WQXe
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The largest part here are devicetree fixes for Qualcomm, and NXP i.MX,
addressing a few regressions and incorrect settings in board and SoC
pecific dts files.
The largest single commits are a revert of a cleanup patch for i.MX
that caused regressions for the NAND flash controller and a fixup for
an incomplete cleanup of the PCIe controller on Qualcomm platforms
that broke because the state was left incompatible with both the old
and new behavior.
On the Rockchips, Hisilicon, Renesas, Allwinner and AT91 platforms,
only a single simple dts bugfix each was added since the last round of
fixes.
On the SoC specific device drivers, everything is relatively harmless:
three reset controller driver fixes, a compatibility for fix ASpeed
soc ID, and error handling fixes for Qualcomm and Microchip. One
regression fix on Qualcomm addresses a problem with a previous fix for
DisplayPort alt mode"
* tag 'soc-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration
dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example
firmware: microchip: fail auto-update probe if no flash found
arm64: dts: renesas: sparrow-hawk: Reserve first 128 MiB of DRAM
arm64: dts: qcom: agatti: Fix IOMMU DT properties
dt-bindings: media: venus: Fix iommus property
dt-bindings: display: msm: qcm2290-mdss: Fix iommus property
arm64: dts: allwinner: sun55i: Fix r-spi DMA
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges
arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind
soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V
Revert "arm64: dts: imx8mq-librem5: Set the DVS voltages lower"
...
In the PCIe PHY init for the i.MX95, the reference clock source selection
uses a conditional instead of always passing the mask. This currently
breaks functionality if the internal refclk is used.
To fix this issue, always pass IMX95_PCIE_REF_USE_PAD as the mask and clear
bit if external refclk is not used. This essentially swaps the parameters.
Fixes: d8574ce57d ("PCI: imx6: Add external reference clock input mode support")
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325093118.684142-1-fra.schnyder@gmail.com
pcie_tph_get_cpu_st() uses the Query Cache Locality Features _DSM [1]
to retrieve the TPH Steering Tag for memory associated with the CPU
identified by its "cpu_uid" parameter, a Linux logical CPU ID.
The _DSM requires an ACPI Processor UID, which pcie_tph_get_cpu_st()
previously assumed was the same as the Linux logical CPU ID. This is
true on x86 but not on arm64, so pcie_tph_get_cpu_st() returned the
wrong Steering Tag, resulting in incorrect TPH functionality on arm64.
Convert the Linux logical CPU ID to the ACPI Processor UID with
acpi_get_cpu_uid() before passing it to the _DSM. Additionally, rename
the pcie_tph_get_cpu_st() parameter from "cpu_uid" to "cpu" to reflect
that it represents a logical CPU ID (not an ACPI Processor UID).
[1] According to ECN_TPH-ST_Revision_20200924
(https://members.pcisig.com/wg/PCI-SIG/document/15470), the input
is defined as: "If the target is a processor, then this field
represents the ACPI Processor UID of the processor as specified in
the MADT. If the target is a processor container, then this field
represents the ACPI Processor UID of the processor container as
specified in the PPTT."
Fixes: d2e8a34876 ("PCI/TPH: Add Steering Tag support")
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260401081640.26875-9-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update acpi/pptt.c to use acpi_get_cpu_uid() and remove unused
get_acpi_id_for_cpu() from arm64/loongarch/riscv, completing PPTT's
migration to the unified ACPI CPU UID interface
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-8-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update arm_cspmu to use acpi_get_cpu_uid() instead of
get_acpi_id_for_cpu(), aligning with unified ACPI CPU UID interface.
No functional changes are introduced by this switch (valid inputs retain
original behavior).
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-7-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Centralize acpi_get_cpu_uid() in include/linux/acpi.h (global scope) and
remove arch-specific declarations from arm64/loongarch/riscv/x86
asm/acpi.h. This unifies the interface across architectures and
simplifies maintenance by eliminating duplicate prototypes.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-6-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As a step towards unifying the interface for retrieving ACPI CPU UID
across architectures, introduce a new function acpi_get_cpu_uid() for
x86. While at it, add input validation to make the code more robust.
Update Xen-related code to use acpi_get_cpu_uid() instead of the legacy
cpu_acpi_id() function, and remove the now-unused cpu_acpi_id() to clean
up redundant code.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20260401081640.26875-5-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As a step towards unifying the interface for retrieving ACPI CPU UID
across architectures, introduce a new function acpi_get_cpu_uid() for
riscv. While at it, add input validation to make the code more robust.
And also update acpi_numa.c and rhct.c to use the new interface instead
of the legacy get_acpi_id_for_cpu().
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-4-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As a step towards unifying the interface for retrieving ACPI CPU UID
across architectures, introduce a new function acpi_get_cpu_uid() for
loongarch. While at it, add input validation to make the code more
robust.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-3-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As a step towards unifying the interface for retrieving ACPI CPU UID
across architectures, introduce a new function acpi_get_cpu_uid() for
arm64. While at it, add input validation to make the code more robust.
Reimplement get_cpu_for_acpi_id() based on acpi_get_cpu_uid() for
consistency, and move its implementation next to the new function for
code coherence.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://patch.msgid.link/20260401081640.26875-2-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ADSP found on Eliza SoC is similar to the one found on SM8550.
So just add the dedicated compatible for Eliza ADSP and reuse the
SM8550 resource configuration.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-eliza-remoteproc-adsp-v1-2-1c46c5e5f809@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for decoding NVIDIA-specific CPER sections delivered via
the APEI GHES vendor record notifier chain. NVIDIA hardware generates
vendor-specific CPER sections containing error signatures and diagnostic
register dumps. This implementation registers a notifier_block with the
GHES vendor record notifier and decodes these sections, printing error
details via dev_info().
The driver binds to ACPI device NVDA2012, present on NVIDIA server
platforms. The NVIDIA CPER section contains a fixed header with error
metadata (signature, error type, severity, socket) followed by
variable-length register address-value pairs for hardware diagnostics.
This work is based on libcper [1].
Example output:
nvidia-ghes NVDA2012:00: NVIDIA CPER section, error_data_length: 544
nvidia-ghes NVDA2012:00: signature: CMET-INFO
nvidia-ghes NVDA2012:00: error_type: 0
nvidia-ghes NVDA2012:00: error_instance: 0
nvidia-ghes NVDA2012:00: severity: 3
nvidia-ghes NVDA2012:00: socket: 0
nvidia-ghes NVDA2012:00: number_regs: 32
nvidia-ghes NVDA2012:00: instance_base: 0x0000000000000000
nvidia-ghes NVDA2012:00: register[0]: address=0x8000000100000000 value=0x0000000100000000
683e055061 [1]
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260330094203.38022-4-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch to the device-managed variant so the notifier is automatically
unregistered on device removal, allowing the open-coded remove callback
to be dropped entirely.
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20260330094203.38022-3-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a device-managed wrapper around ghes_register_vendor_record_notifier()
so drivers can avoid manual cleanup on device removal or probe failure.
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://patch.msgid.link/20260330094203.38022-2-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the devicetree bindings are exactly the same between Eliza ADSP and
Milos ADSP, reuse the existing Milos schema, just add the Eliza specific
ADSP compatible.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-eliza-remoteproc-adsp-v1-1-1c46c5e5f809@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add missing space before closing curly bracket for qcom_q6v5_mss and
qcom_q6v5_pas driver of_match[] lines, so that all qcom remoteproc
drivers are consistent on the common coding style.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260306145607.1394878-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The type of firmware-name is already defined by core schemas. Drop it
from individual bindings that have either a redundant definition or
an override as string type. For the later cases, constrain the number
of expected firmware names to 1.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309123357.1911586-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
