The Lenovo Yoga Pro 7 14IMH9 (DMI: 83E2) shares PCI SSID 17aa:3847
with the Legion 7 16ACHG6, but has a different codec subsystem ID
(17aa:38cf). The existing SND_PCI_QUIRK for 17aa:3847 applies
ALC287_FIXUP_LEGION_16ACHG6, which attempts to initialize an external
I2C amplifier (CLSA0100) that is not present on the Yoga Pro 7 14IMH9.
As a result, pin 0x17 (bass speakers) is connected to DAC 0x06 which
has no volume control, making hardware volume adjustment completely
non-functional. Audio is either silent or at maximum volume regardless
of the slider position.
Add a HDA_CODEC_QUIRK entry using the codec subsystem ID (17aa:38cf)
to correctly identify the Yoga Pro 7 14IMH9 and apply
ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN, which redirects pin 0x17 to
DAC 0x02 and restores proper volume control. The existing Legion entry
is preserved unchanged.
This follows the same pattern used for 17aa:386e, where Legion Y9000X
and Yoga Pro 7 14ARP8 share a PCI SSID but are distinguished via
HDA_CODEC_QUIRK.
Link: https://github.com/nomad4tech/lenovo-yoga-pro-7-linux
Tested-by: Alexander Savenko <alex.sav4387@gmail.com>
Signed-off-by: Alexander Savenko <alex.sav4387@gmail.com>
Link: https://patch.msgid.link/20260331082929.44890-1-alex.sav4387@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes.
Fixes: 20f6a05ef6 ("bridge: mrp: Rework the MRP netlink interface")
Fixes: 7ab1748e4c ("bridge: mrp: Extend MRP netlink interface for configuring MRP interconnect")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260328063000.1845376-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add ATTR CSR bit field definitions for the DMA engine TLP header
configuration registers:
AW_CFG: RDE_ATTR[17:15], RQM_ATTR[14:12], TQM_ATTR[11:9]
AR_CFG: TDE_ATTR[17:15], RQM_ATTR[14:12], TQM_ATTR[11:9]
These fields control the PCIe TLP attribute bits for outbound
transactions from the TQM, RQM, RDE (write path), and TDE (read path)
DMA engines. An enum is added with standard PCIe TLP attribute values:
NS (No Snoop), RO (Relaxed Ordering), and IDO (ID-based Ordering).
Read the PCIe Relaxed Ordering capability at probe time and store it in
fbnic_dev. Configure Relaxed Ordering on the PCIe TLP attributes in
fbnic_mbx_init_desc_ring when the capability is enabled. For the write
path (AW_CFG), set RO on RDE and TQM attributes. For the read path
(AR_CFG), set RO on all three attributes (TDE, RQM, TQM). This allows
the PCIe fabric to reorder these transactions for improved throughput.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260327204445.3074446-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With fallocate support, xfstest unit generic/213 fails with
QA output created by 213
We should get: fallocate: No space left on device
Strangely, xfs_io sometimes says "Success" when something went wrong
-fallocate: No space left on device
+fallocate: File too large
because sb->s_maxbytes is set to the volume size.
To be in line with other non-extent-based filesystems, set to max volume
size possible with the cluster size of the volume.
Signed-off-by: David Timber <dxdt@dev.snart.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
snd_soc_unbind_card() calls snd_soc_flush_all_delayed_work() (A),
but it will be called in soc_cleanup_card_resources() (B).
It is duplicated, let's remove it.
(B) static void soc_cleanup_card_resources(...)
{
...
/* flush delayed work before removing DAIs and DAPM widgets */
(A)' snd_soc_flush_all_delayed_work(card);
...
}
static void snd_soc_unbind_card(...)
{
if (snd_soc_card_is_instantiated(card)) {
card->instantiated = false;
(A) snd_soc_flush_all_delayed_work(card);
(B) soc_cleanup_card_resources(card);
}
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h5pwdc3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rust Binder exposes information about transactions that are sent in
various ways: printing to the kernel log, tracepoints, files in
binderfs, and the upcoming netlink support. Currently all these
mechanisms use disparate ways of obtaining the same information, so
let's introduce a single Info struct that collects all the required
information in a single place, so that all of these different mechanisms
can operate in a more uniform way.
For now, the new info struct is only used to replace a few things:
* The BinderTransactionDataSg struct that is passed as an argument to
several methods is removed as the information is moved into the new
info struct and passed down that way.
* The oneway spam detection fields on Transaction and Allocation can be
removed, as the information can be returned to the caller via the
mutable info struct instead.
But several other uses of the info struct are planned in follow-up
patches.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260306-transaction-info-v1-1-fda58fca558b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
Add a driver so that Linux can set the mux based on the interrupt
mapping in the devicetree.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add support for interrupts to the PolarFire SoC GPIO driver. Each GPIO
has an independent interrupt that is wired to an interrupt mux that sits
between the controllers and the PLIC. The SoC has more GPIO lines than
connections from the mux to the PLIC, so some GPIOs must share PLIC
interrupts. The configuration is not static and is set at runtime,
conventionally by the platform's firmware. CoreGPIO, the version
intended for use in the FPGA fabric has two interrupt output ports, one
is IO_NUM bits wide, as is used in the hardened cores, and the other is
a single bit with all lines ORed together.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources()
has allocated args.zones_cond, the memory is leaked because no error path
frees it.
Fixes: 6e945ffb65 ("block: use zone condition to determine conventional zones")
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://patch.msgid.link/20260331111216.24242-1-liu.yun@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit c073f07576 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Currently, SND_SOC_INTEL_SOUNDWIRE_SOF_MACH selects PINCTRL_CS42L43
without also selecting or depending on PINCTRL, despite PINCTRL_CS42L43
depending on PINCTRL.
See the following Kbuild warning:
WARNING: unmet direct dependencies detected for PINCTRL_CS42L43
Depends on [n]: PINCTRL [=n] && MFD_CS42L43 [=m]
Selected by [m]:
- SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=m] && SOUND [=y] && SND [=m] && SND_SOC [=m] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_SOF_INTEL_COMMON [=m] || !SND_SOC_SOF_INTEL_COMMON [=m]) && SND_SOC_SOF_INTEL_SOUNDWIRE [=m] && I2C [=y] && SPI_MASTER [=y] && ACPI [=y] && (MFD_INTEL_LPSS [=n] || COMPILE_TEST [=y]) && (SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=n] || COMPILE_TEST [=y]) && SOUNDWIRE [=m]
In response to v1 of this patch [1], Arnd pointed out that there is
no compile-time dependency sof_sdw and the PINCTRL_CS42L43 driver.
After testing, I can confirm that the kernel compiled with
SND_SOC_INTEL_SOUNDWIRE_SOF_MACH enabled and PINCTRL_CS42L43 disabled.
This unmet dependency was detected by kconfirm, a static analysis
tool for Kconfig.
Link: https://lore.kernel.org/all/b8aecc71-1fed-4f52-9f6c-263fbe56d493@app.fastmail.com/ [1]
Fixes: c073f07576 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260325001522.1727678-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When LOOP_CONFIGURE is called with LO_FLAGS_PARTSCAN, the following
sequence occurs:
1. disk_force_media_change() sets GD_NEED_PART_SCAN
2. Uevent suppression is lifted and a KOBJ_CHANGE uevent is sent
3. loop_global_unlock() releases the lock
4. loop_reread_partitions() calls bdev_disk_changed() to scan
There is a race between steps 2 and 4: when udev receives the uevent
and opens the device before loop_reread_partitions() runs,
blkdev_get_whole() in bdev.c sees GD_NEED_PART_SCAN set and calls
bdev_disk_changed() for a first scan. Then loop_reread_partitions()
does a second scan. The open_mutex serializes these two scans, but
does not prevent both from running.
The second scan in bdev_disk_changed() drops all partition devices
from the first scan (via blk_drop_partitions()) before re-adding
them, causing partition block devices to briefly disappear. This
breaks any systemd unit with BindsTo= on the partition device: systemd
observes the device going dead, fails the dependent units, and does
not retry them when the device reappears.
Fix this by removing the GD_NEED_PART_SCAN set from
disk_force_media_change() entirely. None of the current callers need
the lazy on-open partition scan triggered by this flag:
- floppy: sets GENHD_FL_NO_PART, so disk_has_partscan() is always
false and GD_NEED_PART_SCAN has no effect.
- loop (loop_configure, loop_change_fd): when LO_FLAGS_PARTSCAN is
set, loop_reread_partitions() performs an explicit scan. When not
set, GD_SUPPRESS_PART_SCAN prevents the lazy scan path.
- loop (__loop_clr_fd): calls bdev_disk_changed() explicitly if
LO_FLAGS_PARTSCAN is set.
- nbd (nbd_clear_sock_ioctl): capacity is set to zero immediately
after; nbd manages GD_NEED_PART_SCAN explicitly elsewhere.
With GD_NEED_PART_SCAN no longer set by disk_force_media_change(),
udev opening the loop device after the uevent no longer triggers a
redundant scan in blkdev_get_whole(), and only the single explicit
scan from loop_reread_partitions() runs.
A regression test for this bug has been submitted to blktests:
https://github.com/linux-blktests/blktests/pull/240.
Fixes: 9f65c489b6 ("loop: raise media_change event")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20260331105130.1077599-1-daan@amutable.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The TCG Opal device could enter a state where no new session can be
created, blocking even Discovery or PSID reset. While a power cycle
or waiting for the timeout should work, there is another possibility
for recovery: using the Stack Reset command.
The Stack Reset command is defined in the TCG Storage Architecture Core
Specification and is mandatory for all Opal devices (see Section 3.3.6
of the Opal SSC specification).
This patch implements the Stack Reset command. Sending it should clear
all active sessions immediately, allowing subsequent commands to run
successfully. While it is a TCG transport layer command, the Linux
kernel implements only Opal ioctls, so it makes sense to use the
IOC_OPAL ioctl interface.
The Stack Reset takes no arguments; the response can be success or pending.
If the command reports a pending state, userspace can try to repeat it;
in this case, the code returns -EBUSY.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Ondrej Kozina <okozina@redhat.com>
Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix screenpad brightness range being too limited without reason:
testing this patch on a Zenbook Duo showed the hardware minimum not being
too low, therefore allow the user to configure the entire range, and
expose to userspace the hardware brightness range and value.
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix illogical screen off control by hardcoding 0 and 1 depending on the
requested brightness and also do not rely on the last screenpad power
state to issue screen brightness commands.
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-2-denis.benato@linux.dev
Link: https://patch.msgid.link/20260326231154.856729-2-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
Fixes: 25f9b0d351 ("misc/mei: Allow building Intel ME interface on non-x86")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8e2646fb71b148b3d38beb13f19b14e3634a1e1a.1769541024.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 2cedb29698 ("mei: me: trigger link reset if hw ready is unexpected")
some devices started to show long resume times (5-7 seconds).
This happens as mei falsely detects unready hardware,
starts parallel link reset flow and triggers link reset timeouts
in the resume callback.
Address it by performing detection of unready hardware only
when driver is in the MEI_DEV_ENABLED state instead of blacklisting
states as done in the original patch.
This eliminates active waitqueue check as in MEI_DEV_ENABLED state
there will be no active waitqueue.
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221023
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: 2cedb29698 ("mei: me: trigger link reset if hw ready is unexpected")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260330083830.536056-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When declaring an immutable global variable in Rust, the compiler checks
that it looks thread safe, because it is generally safe to access said
global variable. When using C bindings types for these globals, we don't
really want this check, because it is conservative and assumes pointers
are not thread safe.
In the case of BINDER_VM_OPS, this is a challenge when combined with the
patch 'userfaultfd: introduce vm_uffd_ops' [1], which introduces a
pointer field to vm_operations_struct. It previously only held function
pointers, which are considered thread safe.
Rust Binder should not be assuming that vm_operations_struct contains no
pointer fields, so to fix this, use AssertSync (which Rust Binder has
already declared for another similar global of type struct
file_operations with the same problem). This ensures that even if
another commit adds a pointer field to vm_operations_struct, this does
not cause problems.
Fixes: 8ef2c15aea ("rust_binder: check ownership before using vma")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121235.tpnRxFKO-lkp@intel.com/
Link: https://lore.kernel.org/r/20260306171815.3160826-8-rppt@kernel.org [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260314111951.4139029-1-aliceryhl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch device_set_node to set_primary_fwnode, so that the ACPI fwnode
does not overwrite the of_node with NULL.
This allows MFD children with both OF nodes and ACPI handles to have OF
nodes again.
Cc: stable@vger.kernel.org
Fixes: 51e3b25709 ("mfd: core: Make use of device_set_node()")
Signed-off-by: Brian Mak <makb@juniper.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260325223024.35992-1-makb@juniper.net
Signed-off-by: Lee Jones <lee@kernel.org>
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively.
Fixes: 5a5efdaffd ("thermal: core: Resume thermal zones asynchronously")
Reported-by: syzbot+3b3852c6031d0f30dfaf@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=3b3852c6031d0f30dfaf
Reported-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Closes: https://lore.kernel.org/linux-pm/20260324-thermal-core-uaf-init_delayed_work-v1-1-6611ae76a8a1@igalia.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Tested-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/6267615.lOV4Wx5bFT@rafael.j.wysocki
In rt5660_hw_params(), the error path for snd_soc_dai_set_sysclk()
correctly uses rtd->dev as the logging device, but the error path for
snd_soc_dai_set_pll() uses codec_dai->dev instead.
These two devices are distinct:
- rtd->dev is the platform device of the PCM runtime (the Intel HDA/SSP
controller, e.g. 0000:00:1f.3), which owns the machine driver callback.
- codec_dai->dev is the I2C device of the rt5660 codec itself
(i2c-10EC5660:00).
Since hw_params is a machine driver operation and both calls are made
within the same function from the machine driver's context, all error
messages should be attributed to rtd->dev. Using codec_dai->dev for one
of them would suggest the error originates inside the codec driver,
which is misleading.
Align the PLL error log with the sysclk one to use rtd->dev, matching
the convention used by all other Intel board drivers in this directory.
Signed-off-by: Sachin Mokashi <sachin.mokashi@intel.com>
Link: https://patch.msgid.link/20260327131439.1330373-1-sachin.mokashi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CMA dma-buf heap uses cma_alloc() and cma_release() to allocate and
free, respectively, its CMA buffers, and cma_get_name() to get the name
of the heap instance it's going to create.
However, these functions are not exported. Since we want to turn the CMA
heap into a module, let's export them both.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-5-e18fda504419@kernel.org
The CMA dma-buf heap uses the dev_get_cma_area() function to retrieve
the default contiguous area.
Now that this function is no longer inlined, and since we want to turn
the CMA heap into a module, let's export it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-4-e18fda504419@kernel.org
Now that dev_get_cma_area() is no longer inline, we don't have any user
of dma_contiguous_default_area() outside of contiguous.c so we can make
it static.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-3-e18fda504419@kernel.org
As we try to enable dma-buf heaps, and the CMA one in particular, to
compile as modules, we need to export dev_get_cma_area(). It's currently
implemented as an inline function that returns either the content of
device->cma_area or dma_contiguous_default_area.
Thus, it means we need to export dma_contiguous_default_area, which
isn't really something we want any module to have access to.
Instead, let's make dev_get_cma_area() a proper function we will be able
to export so we can avoid exporting dma_contiguous_default_area.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-2-e18fda504419@kernel.org
The CMA heap instantiation was initially developed by having the
contiguous DMA code call into the CMA heap to create a new instance
every time a reserved memory area is probed.
Turning the CMA heap into a module would create a dependency of the
kernel on a module, which doesn't work.
Let's turn the logic around and do the opposite: store all the reserved
memory CMA regions into the contiguous DMA code, and provide an iterator
for the heap to use when it probes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-1-e18fda504419@kernel.org
Clean up module init by dropping redundant error messages (e.g.
allocation and USB driver registration failure will already have been
logged) and naming error labels after what they do.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Error labels should be named after what they do.
Rename the probe error labels.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller.
Fixes: dcfdd698dc ("mmc: vub300: Use devm_mmc_alloc_host() helper")
Cc: stable@vger.kernel.org # 6.17+
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free.
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix incorrect error checking and memory type confusion in
efidrm_device_create(). devm_memremap() returns error pointers, not
NULL, and returns system memory while devm_ioremap() returns I/O memory.
The code incorrectly passes system memory to iosys_map_set_vaddr_iomem().
Restructure to handle each memory type separately. Use devm_ioremap*()
with ERR_PTR(-ENXIO) for WC/UC, and devm_memremap() with ERR_CAST() for
WT/WB.
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260311064652.2903449-1-nichen@iscas.ac.cn
Save the trace ID in drvdata during TPDM enablement and expose it
to userspace to support trace data parsing.
The TPDM device’s trace ID corresponds to the trace ID allocated
to the connected TPDA device.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260331-add-traceid-show-for-tpdm-v4-1-ed3dda24a562@oss.qualcomm.com
When an ID has no dquot on disk, Q_XGETQUOTA returns -ENOENT even
though default quota limits are configured and enforced against that
ID. This means unprivileged users who have never used any resources
cannot see the limits that apply to them.
When xfs_qm_dqget() returns -ENOENT for a non-zero ID, return a
zero-usage response with the default limits filled in from
m_quotainfo rather than propagating the error. This is consistent
with the enforcement behavior in xfs_qm_adjust_dqlimits(), which
pushes the same default limits into a dquot when it is first
allocated.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ravi Singh <ravising@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Apple Backlight ACPI driver to a
platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/5084777.GXAFRqVoOG@rafael.j.wysocki
Signed-off-by: Lee Jones <lee@kernel.org>
The function dw_mci_start_request() was just a thin wrapper around
__dw_mci_start_request(). Since it serves almost no functional purpose,
remove the wrapper to simplify the code flow.
Consequently, rename __dw_mci_start_request() to dw_mci_start_request()
so that the core implementation uses the primary name.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With the removal of queue support, the function dw_mci_queue_request()
is now just a wrapper with a confusing name that doesn't suggest
anything about queue. Removes the function and moves its body into
dw_mci_request().
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, the code uses the MQRQ_XFER_SINGLE_BLOCK flag to handle write
failures by retrying with single-block transfers. However, read failures
bypass this mechanism and instead use a dedicated legacy path mmc_blk_read_single()
that performs sector-by-sector retries.
Extend the MQRQ_XFER_SINGLE_BLOCK logic to cover multi-block read failures
as well. By doing so, we can remove the redundant and complex mmc_blk_read_single()
function, unifying the retry logic for both read and write operations under
a single, consistent, easier-to-maintain mechanism.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Replacing hard-coded values with standardized macros to improve code clarity,
simplify future maintenance.
Meanwhile, introduce global bs and sg_len arrays for block sizes and SG lengths,
eliminating redundant local definitions in multiple test functions.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert to use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() to drop the
CONFIG_PM_SLEEP to handle the conditional compilation when PM support is
disabled. This allows the compiler to automatically optimize away the
unused code paths when CONFIG_PM_SLEEP is not selected.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
These shift-by-9 operations are for converting between bytes and sectors.
Use the SECTOR_SHIFT macro to improve code readability and maintainability.
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver previously used an enum (dwcmshc_rk_type) to distinguish
platforms like the RK3568 and RK3588 based on DT compatible names.
This approach is inflexible, scales poorly for future revisions or
mixed-revision platforms, and conflates SoC names with controller
revisions. One example is RK3576 which lists "rockchip,rk3588-dwcmshc"
as a secondary compatible string just in order to claim it uses the
same controller revision as RK3588. This is confusing and makes it
error-prone to add new SoC support.
Introduces a new struct rockchip_pltfm_data containing a dedicated
revision field. The old enum is removed, and all code paths are
updated to use the revision-based data.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Suraj Gupta says:
====================
Correct BD length masks and BQL accounting for multi-BD TX packets
This patch series fixes two issues in the Xilinx AXI Ethernet driver:
1. Corrects the BD length masks to match the AXIDMA IP spec.
2. Fixes BQL accounting for multi-BD TX packets.
====================
Link: https://patch.msgid.link/20260327073238.134948-1-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator.
Fixes: c900e49d58 ("net: xilinx: axienet: Implement BQL")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-3-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.
In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-2-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object().
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 7bb1eb45e4 ("VFS: introduce start_removing_dentry()")
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/177456350181.1851489.16359967086642190170@noble.neil.brown.name
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
s/cachep/cache/ for consistency with namei and dentry caches.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260328173728.3388070-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
