Use common helper function for firmware version check and logging in
SMUv14
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Rapid allow/disallow of idle optimization calls, whether it be IPS or
self-refresh features, can end up using more power if actual
time-in-idle is low. It can also spam DMUB command submission in a way
that prevents it from servicing other requestors.
[How]
Introduce the Idle State Manager (ISM) to amdgpu. It maintains a finite
state machine that uses a hysteresis to determine if a delay should be
inserted between a caller allowing idle, and when the actual idle
optimizations are programmed.
A second timer is also introduced to enable static screen optimizations
(SSO) such as PSR1 and Replay low HZ idle mode. Rapid SSO enable/disable
can have a negative power impact on some low hz video playback, and can
introduce user lag for PSR1 (due to up to 3 frames of sync latency).
This effectively rate-limits idle optimizations, based on hysteresis.
This also replaces the existing delay logic used for PSR1, allowing
drm_vblank_crtc_config.disable_immediate = true, and thus allowing
drm_crtc_vblank_restore().
v2:
* Loosen criteria for ISM to exit idle optimizations; it failed to exit
idle correctly on cursor updates when there are no drm_vblank
requestors,
* Document default_ism_config
* Convert pr_debug to trace events to reduce overhead on frequent
codepaths
* checkpatch.pl fixes
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4527
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3709
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vijendar Mukunda <Vijendar.Mukunda@amd.com> says:
This patch series updates the dmic_num logic for acp pdm dmic and
renames the dmic component name in acp soundwire legacy machine driver.
For acp pdm dmic use case, user space needs a reliable identifier
to select the correct UCM configuration. Rename component string
as acp-dmic to select the correct UCM configuration for acp pdm dmic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260330072431.3512358-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is no mechanism to read dmic_num in mach_params
structure. In this scenario mach_params->dmic_num check always
returns 0 which fails to add component string for dmic.
Update the condition check with acp pdm dmic quirk check and
pass the dmic_num as 1.
Fixes: 2981d9b078 ("ASoC: amd: acp: add soundwire machine driver for legacy stack")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260330072431.3512358-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cleaner Shader is responsible for clearing LDS, VGPRs and SGPRs
between GPU workloads to enforce process isolation and avoid data
leakage.
The cleaner shader clears per-wave GPU state (LDS, VGPRs and SGPRs)
between workloads, improving process isolation and preventing stale data
from being observed by subsequent tasks.
This reuses the existing cleaner shader used on GFX11.0.3 and enables it
for GFX11.5.4 GPUs when firmware requirements are met.
Cc: Muhammad Adam <muhammad.adam@amd.com>
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Tom Wu <Tom.Wu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For a mode-1 reset done at the end of S4 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6 ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4853
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dev_* printk stuff is multi-GPU friendly.
Use dev_warn_ratelimited() for print_sq_intr_info_error() which is
consistent with previous IPs.
Use dev_dbg_ratelimited() for irrelevant node interrupt print to
avoid too much noise.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use common helper function for firmware version check and logging in
SMUv12.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use common helper function for firmware version check and logging in
SMUv11
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- correct unknown plane state patch
- Revert "Refactor DC update checks"
- Revert "Add 3DLUT DMA broadcast support"
- Remove invalid DPSTREAMCLK mask usage
- enable eDP DSC seamless boot support
- Revert "Rework HDMI link training and YCbCr422 with DSC policy"
- Disable PSR & Replay CRTC disable by default
- Fix Silence Compiler Warnings
- Add link output control for DPIA
- eliminate clock manager code duplication
- Don't set 4to1MPC config dynamically
- Merge pipes for validate
- Fix bounds checking in dml2_0 clock table array
- Avoid turning off the PHY when OTG is running for DVI
- Should support p-state under dcn21
- Enable Replay support for dcn42
- Remove check for DC_DMCUB_ENABLE on DCN42
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Compiler build generates type conversion warnings throughout dc/dml2_0
where values are implicitly narrowed (e.g. int/uint32_t/uint64_t assigned
to uint8_t, unsigned char, char, bool, or dml_bool_t), cluttering build
output and masking genuine issues.
[How]
Add explicit casts at each narrowing assignment with ASSERT guards
to catch out-of-range values in debug builds:
- uint8_t: otg_inst, num_planes, pipe_idx, vblank_index fields
- unsigned char: pipe_dlg_param.otg_inst from tg->inst
- char: mcache num_pipes from num_dpps_required
- bool/dml_bool_t: INTERLACE bitfield and fams2 enable flag use != 0
- uint64_t: widen min_hardware_refresh_in_uhz to hold div64_u64 result,
then cast to unsigned long for min_refresh_uhz with ASSERT
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Resolve compiler warnings by marking unused parameters explicitly.
[How]
In .c and .h files, keep parameter names in signatures and add a
line with`(void)param;` inside the function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Resolve compiler warnings by marking unused parameters explicitly.
[How]
In .c and .h function definitions, keep parameter names
in signatures and add a line with `(void)param;` in function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify allocation by using a flexible array member.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260326023053.53493-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
simple_parse_dai() and graph_util_parse_dai() first try to identify a
DAI via dai_args. When that works the card can rebind without relying on
dlc->dai_name.
The fallback path still calls snd_soc_get_dlc(), which returns a
borrowed dai_name pointer. If the CPU or codec component is unbound
while the sound card stays registered, the generic card keeps that
pointer and the next rebind may compare stale memory while matching the
DAI.
Stage the fallback result in a temporary dai_link_component and move
only a card-owned copy of dai_name into the live link component. Use
devm_kstrdup_const() so static names are reused and dynamic ones remain
valid for the lifetime of the card device.
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260327-asoc-generic-fallback-dai-name-rebind-v3-1-c206e44f40c8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Removed DC_FP_START and DC_FP_END.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to query vram info from firmware
v2: change APU vram type, add multi-aid check
v3: seperate vram info query function into 3 parts and
call them in a helper func when requirements
are met.
v4: calculate vram_width for v9.x
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Conflict in kernel/sched/ext.c init_sched_ext_class() between:
415cb193bb ("sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait
to balance callback")
which adds cpus_to_sync cpumask allocation, and:
84b1a0ea0b ("sched_ext: Implement scx_bpf_dsq_reenq() for user DSQs")
8c1b9453fd ("sched_ext: Convert deferred_reenq_locals from llist to
regular list")
which add deferred_reenq init code at the same location. Both are
independent additions. Include both.
Signed-off-by: Tejun Heo <tj@kernel.org>
[why]
dcn42x is using same gfx as dcn35, i.e. not use gfx_address3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit c24bb00cc6 ("drm/amd/display: Refactor DC update checks")
[WHY]
Causing issues with PSR/Replay, reverting until those can be fixed.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 7d59465de3 ("drm/amd/display: Add 3DLUT DMA broadcast support")
[WHY&HOW]
Dependencies of this change are still causing issues, so reverting until
those can be fixed.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The invalid register field access causes ASSERT(mask != 0) to fire
in set_reg_field_values() during display enable.
WARNING: at drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:100
set_reg_field_values.isra.0+0xcf/0xf0 [amdgpu]
Call Trace:
<TASK>
generic_reg_update_ex+0x66/0x1d0 [amdgpu]
dccg401_set_dpstreamclk+0xed/0x350 [amdgpu]
dcn401_enable_stream+0x165/0x370 [amdgpu]
link_set_dpms_on+0x6e9/0xe90 [amdgpu]
dce110_apply_single_controller_ctx_to_hw+0x343/0x530 [amdgpu]
dce110_apply_ctx_to_hw+0x1f6/0x2d0 [amdgpu]
dc_commit_state_no_check+0x49a/0xe20 [amdgpu]
dc_commit_streams+0x354/0x570 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x6f8/0x3fc0 [amdgpu]
DCN4.x hardware does not have DPSTREAMCLK_GATE_DISABLE and
DPSTREAMCLK_ROOT_GATE_DISABLE fields in DCCG_GATE_DISABLE_CNTL3.
These global fields only exist in DCN3.1.x hardware.
[How]
Remove the call that tries to update non-existent fields in CNTL3.
DCN4.x uses per-instance fields in CNTL5 instead,
which are already correctly programmed in the switch cases above.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Using the alternative implementation via cm structure of config
lut3d data
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: ChuanYu Tseng <ChuanYu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix compiler warnings by consistently use the same signedness for
a given value
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support specific sequencing requirements for DPIA link output
[How]
Implement the dpia_link_hwss structure and define the necessary
control function pointers. The initialization order is
aligned with the core link_hwss definition to ensure consistency
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Lincheng Ku <LinCheng.Ku@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix signed/unsigned mismatch warnings by using the same signedness for a
given value
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implicit signed-to-unsigned conversions caused compiler
warnings in DC paths.
[How]
Added explicit (unsigned int)/(uint32_t) casts for sentinel -1
assignments and IRQ ~MASK initializers, with small cast alignment
in logging/DPCD code.
Functionality and behavior is unchanged; only type intent is explicit.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Clock manager contained significant duplicate code between
variants with identical logic for functions using only SMU
calls or shared registers. This increases maintenance overhead
and potential for bugs.
[How]
Expose clock constants and internal functions in header for
sharing. Remove duplicate implementations and update function
pointers to use shared functions. Refactor remaining
variant-specific functions to use shared constants and helper
functions. Add compatibility comments for hardware differences.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix Conversion that might result in a loss of data warnings in dmub/src/:
- dmub_dcn20/31/32/35/42/60/401.c: Add ASSERT(value <= 0xFF) and
explicit (uint8_t) cast when storing REG_GET results into uint8_t
debug struct fields. Add != 0 for bool assignments from uint32_t
bitfield reads.
- dmub_reg.c: Cast va_arg shift value to uint8_t with ASSERT guard
before passing to set_reg_field_value_masks().
- dmub_srv.c: Widen num_pending to uint64_t to match uint64_t
arithmetic; use != 0 for bool assignments from unsigned expressions.
No functional change intended.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were previously modifying the global dc->config.enable_4to1MPC
dynamically. These variables are meant as global configs, not to
by dynamically modified. Modifying them dynamically prevents us
from enabling/disabling functionality for debug purposes and can
easily lead to bad things since we're not operating on the current
state but on DC-wide variables.
Instead we should look at the existing split4mpc decision in
dcn20_validate_apply_split_flags and make the decision there,
if the global config.enable_4to1MPC is set to true for the
DCN version we're running.
This fixes corruption that is observed when running a new IGT
kms_colorop test for color-space-conversion that uses a
YUV plane and outputs to a writeback connector.
Co-developed by Claude Sonnet 4.5.
Assisted-by: Claude:claude-sonnet-4.5
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn401_init_hw() assumes that update_bw_bounding_box() is valid when
entering the update path. However, the existing condition:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
does not guarantee this, as the freq_changed branch can evaluate to true
independently of the callback pointer.
This can result in calling update_bw_bounding_box() when it is NULL.
Fix this by separating the update condition from the pointer checks and
ensuring the callback, dc->clk_mgr, and bw_params are validated before
use.
Fixes the below:
../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362)
Fixes: ca0fb243c3 ("drm/amd/display: Underflow Seen on DCN401 eGPU")
Cc: Daniel Sa <Daniel.Sa@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Code using driver_deferred_probe_check_state() differs from most
EPROBE_DEFER handling in the kernel. Where other EPROBE_DEFER handling
(e.g. clks, gpios and regulators) waits indefinitely for suppliers to
show up, code using driver_deferred_probe_check_state() will fail
after the deferred_probe_timeout.
This is a problem for generic distro kernels which want to support many
boards using a single kernel build. These kernels want as much drivers to
be modular as possible. The initrd also should be as small as possible,
so the initrd will *not* have drivers not needing to get the rootfs.
Combine this with waiting for a full-disk encryption password in
the initrd and it is pretty much guaranteed that the default 10s timeout
will be hit, causing probe() failures when drivers on the rootfs happen
to get modprobe-d before other rootfs modules providing their suppliers.
Make the default timeout configurable from Kconfig to allow distro kernel
configs where many of the supplier drivers are modules to set the default
through Kconfig.
Reviewed-by: Saravana Kannan <saravanak@kernel.org>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314084916.10868-1-johannes.goede@oss.qualcomm.com
[ Drop deferred_probe_timeout documentation change in
kernel-parameters.txt. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Validation expects to operate on non-split pipes. This is
seen in dcn20_fast_validate_bw, which merges pipes for
validation. We weren't doing that in the non-fast path
which lead to validation failures when operating with
4-to-1 MPC and a writeback connector.
Co-developed by Claude Sonnet 4.5
Assisted-by: Claude:claude-sonnet-4.5
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing info for the update_descriptor parameter in
update_planes_and_stream_state().
Fixes the below with gcc W=1:
../display/dc/core/dc.c:3630 function parameter 'update_descriptor' not described in 'update_planes_and_stream_state'
Fixes: c24bb00cc6 ("drm/amd/display: Refactor DC update checks")
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Dillon Varone <Dillon.Varone@amd.com>
Cc: Chuanyu Tseng <chuanyu.tseng@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clk_mgr_construct() initializes display clock and memory bandwidth
settings during driver bring-up.
As part of this, the driver selects a watermark table based on the
memory type (DDR4, LPDDR4, LPDDR5) from ctx->dc_bios->integrated_info.
The display pipeline continuously reads pixel data from memory,
processes it (such as scaling, color conversion, and blending), and
sends it to the screen. To keep this pipeline running smoothly, the
driver must ensure there is enough memory bandwidth and that clocks are
increased when needed.
Watermark tables define when the GPU should increase clocks to ensure
there is enough bandwidth to feed pixel data without underflow.
However, ctx->dc_bios->integrated_info is dereferenced without checking
for NULL in multiple clk_mgr_construct() implementations. On some
platforms, BIOS may not provide this information, and accessing it
directly can cause a NULL pointer dereference during initialization.
Fix this by adding a NULL check before accessing integrated_info.
If integrated_info is not available, the driver safely falls back to
default watermark tables.
Fixes:
../dcn21/rn_clk_mgr.c:775 rn_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 743)
../dcn301/vg_clk_mgr.c:750 vg_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 736)
../dcn31/dcn31_clk_mgr.c:789 dcn31_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 728)
../dcn314/dcn314_clk_mgr.c:906 dcn314_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 845)
../dcn315/dcn315_clk_mgr.c:716 dcn315_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 655)
../dcn316/dcn316_clk_mgr.c:660 dcn316_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 639)
../dcn35/dcn35_clk_mgr.c:1540 dcn35_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 1467)
Fixes: 25879d7b49 ("drm/amd/display: Clean FPGA code in dc")
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jihed Chaibi <jihed.chaibi.dev@gmail.com> says:
The jz4725b, jz4760 and jz4770 Ingenic codec drivers all share the same
clock management pattern: the clock is obtained with devm_clk_get() in
the platform probe, then manually enabled in the component probe and
disabled in the component remove. The clk_prepare_enable() call in the
component probe is unchecked, meaning clock enable failures are silently
ignored and can lead to register access on unpowered hardware.
This series converts all three drivers to devm_clk_get_enabled(), which
combines the get, prepare and enable steps and ties the clock lifetime to
the device via devres. The now-redundant component remove callbacks and
the struct clk pointers in the private structs are removed.
The clock is obtained with devm_clk_get() in the platform probe, then
manually enabled in the component probe and disabled in the component
remove without checking the return value of clk_prepare_enable().
Use devm_clk_get_enabled() instead, which combines the get, prepare and
enable operations into one call whose lifetime is tied to the device.
This removes the need for explicit enable/disable in the component
probe/remove callbacks, and ensures that clock enable failures are
propagated as errors rather than silently ignored.
Remove the now-unused struct clk pointer from struct jz_codec and drop
the empty component remove callback.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://patch.msgid.link/20260323161551.47181-4-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock is obtained with devm_clk_get() in the platform probe, then
manually enabled in the component probe and disabled in the component
remove without checking the return value of clk_prepare_enable().
Use devm_clk_get_enabled() instead, which combines the get, prepare and
enable operations into one call whose lifetime is tied to the device.
This removes the need for explicit enable/disable in the component
probe/remove callbacks, and ensures that clock enable failures are
propagated as errors rather than silently ignored.
Remove the now-unused struct clk pointer from struct jz_codec and drop
the empty component remove callback.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://patch.msgid.link/20260323161551.47181-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock is obtained with devm_clk_get() in the platform probe, then
manually enabled in the component probe and disabled in the component
remove without checking the return value of clk_prepare_enable().
Use devm_clk_get_enabled() instead, which combines the get, prepare and
enable operations into one call whose lifetime is tied to the device.
This removes the need for explicit enable/disable in the component
probe/remove callbacks, and ensures that clock enable failures are
propagated as errors rather than silently ignored.
Remove the now-unused struct clk pointer from struct jz_icdc and drop
the empty component remove callback.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://patch.msgid.link/20260323161551.47181-2-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().
Both functions check:
if (!dc_dmub_srv || !dc_dmub_srv->dmub)
and then call DC_LOG_ERROR() inside that block.
DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.
Fix this by splitting the checks.
First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.
Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)
Fixes: 2631ac1ac3 ("drm/amd/display: add DMUB registers to crash dump diagnostic data.")
Fixes: 71ba6b577a ("drm/amd/display: Add interface to enable DPIA trace")
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Multiple locations in dml2_0 used num_clk_values-1 as array index
without checking if num_clk_values > 0. When num_clk_values is 0,
this results in accessing array index -1, which wraps to 255 for
unsigned types, causing out-of-bounds memory access and potential
crashes.
[How]
Add proper bounds checking using ternary operators to guard all
num_clk_values-1 array accesses. When num_clk_values is 0, return 0
as fallback value instead of accessing invalid memory. This prevents
buffer overflows while maintaining backward compatibility and provides
sensible default behavior for empty clock tables.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The OTG's virtual pixel clock source for DVI comes from the PHY.
If the signal type is DVI then the OTG can become stuck on pre DCN401
ASIC when DPMS off occurs because the OTG remains running but the
PHY transmitter is disabled.
[How]
There exists logic to keep track of the OTG running refcount on the
link to determine if the link needs to go to PLL_EN instead of TX_EN
but the logic only checks for HDMI TMDS on older ASIC.
DVI is still a TMDS signal type so the constraint should also apply.
Replace the checks for dc_is_hdmi_tmds_signal with dc_is_tmds_signal to
cover both HDMI and DVI for the symclk refcount workaround.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handling unused function parameter due to cause compiler warning
Reviewed-by: Clayton King <clayton.king@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
