Add a DMI quirk entry for ASUS HN7306EA in the ACP SoundWire legacy
machine driver.
Set driver_data to ASOC_SDW_ACP_DMIC for this board so the
platform-specific DMIC quirk path is selected.
Signed-off-by: Hasun Park <hasunpark@gmail.com>
Link: https://patch.msgid.link/20260319163321.30326-1-hasunpark@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_parse_token_sets() accepts array->size values that can be invalid
for a vendor tuple array header. In particular, a zero size does not
advance the parser state and can lead to non-progress parsing on
malformed topology data.
Validate array->size against the minimum header size and reject values
smaller than sizeof(*array) before parsing. This preserves behavior for
valid topologies and hardens malformed-input handling.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260319-sof-topology-array-size-fix-v1-1-f9191b16b1b7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design, which was
made in the context of systems far smaller than today, is based on the
assumption that the to be monitored clocksource (TSC) can be trivially
compared against a known to be stable clocksource (HPET/ACPI-PM timer).
Over the years it turned out that this approach has major flaws:
- Long delays between watchdog invocations can result in wrap arounds
of the reference clocksource
- Scalability of the reference clocksource readout can degrade on large
multi-socket systems due to interconnect congestion
This was addressed with various heuristics which degraded the accuracy of
the watchdog to the point that it fails to detect actual TSC problems on
older hardware which exposes slow inter CPU drifts due to firmware
manipulating the TSC to hide SMI time.
To address this and bring back sanity to the watchdog, rewrite the code
completely with a different approach:
1) Restrict the validation against a reference clocksource to the boot
CPU, which is usually the CPU/Socket closest to the legacy block which
contains the reference source (HPET/ACPI-PM timer). Validate that the
reference readout is within a bound latency so that the actual
comparison against the TSC stays within 500ppm as long as the clocks
are stable.
2) Compare the TSCs of the other CPUs in a round robin fashion against
the boot CPU in the same way the TSC synchronization on CPU hotplug
works. This still can suffer from delayed reaction of the remote CPU
to the SMP function call and the latency of the control variable cache
line. But this latency is not affecting correctness. It only affects
the accuracy. With low contention the readout latency is in the low
nanoseconds range, which detects even slight skews between CPUs. Under
high contention this becomes obviously less accurate, but still
detects slow skews reliably as it solely relies on subsequent readouts
being monotonically increasing. It just can take slightly longer to
detect the issue.
3) Rewrite the watchdog test so it tests the various mechanisms one by
one and validating the result against the expectation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Daniel J Blueman <daniel@quora.org>
Link: https://patch.msgid.link/20260123231521.926490888@kernel.org
Link: https://patch.msgid.link/87h5qeomm5.ffs@tglx
Change /** to /* for the DMA attributes list comment in dma-mapping.h.
The comment is not a kernel-doc structured comment and should not use
the kernel-doc opening marker.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260315171001.66010-1-xaum.io@gmail.com
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- new patch
HMM is fundamentally about allowing a sophisticated device to perform DMA
directly to a process’s memory while the CPU accesses that same memory at
the same time. It is similar to SVA but does not rely on IOMMU support.
Because the entire model depends on concurrent access to shared memory, it
fails as a uAPI if SWIOTLB substitutes the memory or if the CPU caches are
not coherent with DMA.
Until now, there has been no reliable way to report this, and various
approximations have been used:
int hmm_dma_map_alloc(struct device *dev, struct hmm_dma_map *map,
size_t nr_entries, size_t dma_entry_size)
{
<...>
/*
* The HMM API violates our normal DMA buffer ownership rules and can't
* transfer buffer ownership. The dma_addressing_limited() check is a
* best approximation to ensure no swiotlb buffering happens.
*/
dma_need_sync = !dev->dma_skip_sync;
if (dma_need_sync || dma_addressing_limited(dev))
return -EOPNOTSUPP;
So let's mark mapped buffers with DMA_ATTR_REQUIRE_COHERENT attribute
to prevent silent data corruption if someone tries to use hmm in a system
with swiotlb or incoherent DMA
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-8-1dde90a7f08b@nvidia.com
Add support for the DMA_ATTR_REQUIRE_COHERENT attribute to the exported
functions. This attribute indicates that the SWIOTLB path must not be
used and that no sync operations should be performed.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-6-1dde90a7f08b@nvidia.com
DMA_ATTR_REQUIRE_COHERENT indicates that SWIOTLB must not be used.
Ensure the SWIOTLB path is declined whenever the DMA direct path is
selected.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-5-1dde90a7f08b@nvidia.com
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
Reported-by: Teddy Astie <teddy.astie@vates.tech>
Fixes: 1c5de1939c ("xen: add privcmd driver")
Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich)
The mapping buffers which carry this attribute require DMA coherent system.
This means that they can't take SWIOTLB path, can perform CPU cache overlap
and doesn't perform cache flushing.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-4-1dde90a7f08b@nvidia.com
Sources already have SPDX-FileCopyrightText (~40 instances) and more
appear on the mailing list, so document that it is allowed. On the
other hand SPDX defines several other tags like SPDX-FileType, so add
checkpatch rule to narrow desired tags only to two of them - license and
copyright. That way no new tags would sneak in to the kernel unnoticed.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the DMA_ATTR_CPU_CACHE_CLEAN attribute to better reflect that it
is debugging aid to inform DMA core code that CPU cache line overlaps are
allowed, and refine the documentation describing its use.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-3-1dde90a7f08b@nvidia.com
Tracing prints decoded DMA attribute flags, but it does not yet
include the recently added DMA_ATTR_CPU_CACHE_CLEAN. Add support
for decoding and displaying this attribute in the trace output.
Fixes: 61868dc55a ("dma-mapping: add DMA_ATTR_CPU_CACHE_CLEAN")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-2-1dde90a7f08b@nvidia.com
Add interrupt support for the GMAC1 and GMAC2 PHYs on the RZ/T2H EVK
board. The PHYs are connected to the ICU via IRQ3 and IRQ13 lines
respectively.
Define RZT2H_IRQxx macros in the SoC DTSI to map the ICU IRQ_NS lines
to their absolute ICU interrupt space offsets.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260312160407.3387840-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add interrupt support for the GMAC1 and GMAC2 PHYs on the RZ/N2H EVK
board. The PHYs are connected to the ICU via IRQ14 and IRQ15 lines
respectively.
Define RZN2H_IRQxx macros in the SoC DTSI to map the ICU IRQ_NS lines
to their absolute ICU interrupt space offsets.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260312160407.3387840-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add device tree overlay to support the MayQueen PixPaper e-paper display
on the Renesas RZ/V2H EVK (KAKIP board). The display is connected via
SPI0 interface and uses GPIO pins for reset, busy, and DC control.
The overlay configures:
- RSPI0 pinmux for SPI communication (MOSI, MISO, CLK, CE0),
- PixPaper display device with proper GPIO assignments,
- SPI frequency set to 1MHz for stable operation.
This enables support for the Open-EP Community pixpaper-213-c module on
the RZ/V2H platform.
Signed-off-by: Wig Cheng <onlywig@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260124163611.3279104-1-onlywig@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the required JP23 jumper positions for supplying SD0 when
selecting between the onboard eMMC and the SD card slot.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260123225957.1007089-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Clarify the board setup requirements for using SDHI0 on the RZ/T2H EVK by
documenting the CN78 jumper positions needed to supply SD0 power for
either the default eMMC configuration or the SD card slot configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260123225957.1007089-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix a malformed MODULE_AUTHOR macro in the RZ/G2L USBPHY control driver
where the author's name and opening angle bracket were missing, leaving
only the email address with a stray closing >. Correct it to the standard
Name <email> format.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Wa_14026781792 applies to all graphics versions from 30.00
through 35.10 (inclusive). Since there are no IPs between
30.05 and 35.10, consolidate the RTP rules into a single
GRAPHICS_VERSION_RANGE(3000, 3510).
v2: (Matt)
- There are no IPs between 30.05 and 35.10 either,
So, consolidate this into a single GRAPHICS_VERSION_RANGE(3000, 3510)
- Also move it up to the top part of the table
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260317080059.1275116-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Wa_16029437861 requires disabling COAMA atomics by setting bit 22
(SQ_DISABLE_COAMA) of L3SQCREG2 (0xb104) for Xe3p_LPG graphics
version 35.10 stepping A0..B0. This bit is already set by the existing
Wa_14026144927 entry, so add the new WA ID to the same implementation.
Signed-off-by: Varun Gupta <varun.gupta@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patch.msgid.link/20260317040447.1792687-1-varun.gupta@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
drm_bridge_clear_and_put() is simpler to write and it prevents any
potential future use-after-free.
Reviewed-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-2-51fe222f3cf0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Drivers having a struct drm_bridge pointer pointing to a bridge in many
cases hold that reference until the owning device is removed. In those
cases the reference to the bridge can be put in the .remove callback
(possibly using devm actions) or in the .destroy func (possibly with the
help of struct drm_bridge::next_bridge). At those moments the driver should
not be operating anymore and won't dereference the bridge pointer after it
is put.
However there are cases when drivers need to stop holding a reference to a
bridge even when their device is not being removed. This is the case for
bridge hot-unplug, when a bridge is removed but the previous entity (bridge
or encoder) is staying. In such case the "previous entity" needs to put it
but cannot do it via devm or .destroy, because it is not being removed.
The easy way to dispose of such pointer is:
drm_bridge_put(my_priv->some_bridge);
my_priv->some_bridge = NULL;
However this is risky because there is a time window between the two lines
where the reference is put, and thus the bridge could be deallocated, but
the pointer is still assigned. If other functions of the same driver were
invoked concurrently they might dereference my_priv->some_bridge during
that window, resulting in use-after-free.
A correct solution is to clear the pointer before putting the reference,
but that needs a temporary variable:
struct drm_bridge *temp = my_priv->some_bridge;
my_priv->some_bridge = NULL;
drm_bridge_put(temp);
This solution is however annoying to write, so the incorrect version might
still sneak in.
Add a simple, easy to use function to put a bridge after setting its
pointer to NULL in the correct way.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Update the kerneldoc with a more elaborate description of some members,
including the gfp_retry_mayfail member. Use inline kerneldoc.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-4-thomas.hellstrom@linux.intel.com
In situations where the system is very short on RAM, the shmem
readback from swap-space may invoke the OOM killer.
However, since this might be a recoverable situation where the caller
is indicating this by setting
struct ttm_operation_ctx::gfp_retry_mayfail to true, adjust the gfp
value used by the allocation accordingly.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-3-thomas.hellstrom@linux.intel.com
If the struct ttm_operation_ctx::gfp_retry_mayfail is true,
buffer object backing store allocation failures are expected to
silently fail with an error code to the caller. But currently an
elaborate warning is printed to the system log.
Don't spam the log in this way.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-2-thomas.hellstrom@linux.intel.com
Now that all drm_private_objs users have been converted to use
atomic_create_state instead of the old ad-hoc initialization, we can
remove the state parameter from drm_private_obj_init and the fallback
code.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-4-5a72f8ec9934@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tegra driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-3-5a72f8ec9934@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The omapdrm driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-2-5a72f8ec9934@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The amdgpu driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-1-5a72f8ec9934@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 4ab7bb9763 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
modified ata_scsiop_maint_in() to directly call
ata_scsi_set_invalid_field() to set the field pointer of the sense data
of a failed MAINTENANCE IN command. However, in the case of an invalid
command format, the sense data field incorrectly indicates byte 1 of
the CDB. Fix this to indicate byte 2 of the command.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 4ab7bb9763 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Microchip EV23X71A is an LAN9696 based evaluation board.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20260302112153.464422-7-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add support for Microchip LAN969x switch SoC series by adding the SoC DTSI.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20260302112153.464422-5-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
LAN969x uses hardware clock indexes, so document theses in a header to make
them humanly readable.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20260302112153.464422-4-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Replace full device recovery on TDR timeout with per-context abort,
allowing individual context handling instead of resetting the entire
device.
Extend ivpu_jsm_reset_engine() to return the list of contexts impacted
by the engine reset and use that information to abort only the affected
contexts.
Only check for potentially faulty contexts when the engine reset was not
triggered by an MMU fault or a job completion error status. This prevents
misidentifying non-guilty contexts that happened to be running at the
time of the fault.
Trigger full device recovery if no contexts were marked by engine reset
if triggered by job completion timeout, as there is no way to identify
guilty one.
Add engine reset counter to debugfs for engine resets bookkeeping
for debugging/testing purposes.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260318093927.4080303-1-karol.wachowski@linux.intel.com
The driver needs architecture specific headers to build. Problem gets
exposed when TEGRA_BPMP gets COMPILE_TEST added to it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Simplify the driver by using devm interfaces, which allow to drop
probe() error paths and the remove() callback.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update logs, thus there is no point to run it for memory
reclaim.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260305-workqueue-devm-v2-10-66a38741c652@oss.qualcomm.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Merge branch adding support for device-managed workqueue allocation,
which allows cleaning up a chrome-platform driver.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The driver returned an error in the probe function when a usb c
connector is configured in the DT without a "typec-power-opmode"
property. This property is used to initialize the CURRENT_MODE_ADVERTISE
register of the TUSB320, which is unused when operating as a UFP.
Requiring this property causes unnecessary configuration overhead and
inconsistency with the USB connector DT bindings, which do not specify
it as required.
This change makes typec-power-opmode optional. When the property is not
present, the driver will skip programming the CURRENT_MODE_ADVERTISE
register and rely on the hardware default.
Signed-off-by: Yannis Bolliger <yannis.bolliger@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/aPKZJ6WTZlhSOyST@yaene-desktop/
