The options are used to configure the evsel but are not themselves
configured. Make the arguments const to better capture this.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Allow the target to be const in callers.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Switch to using evsel__match rather than comparing perf_event_attr
values, this is robust on hybrid architectures.
Ensure evsel->pmu matches the evsel->core.attr.
Remove exclude bits that get set in other fallback attempts when
switching the event.
Log the event name with modifiers when switching the event on fallback.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously, only the first DWARF location entry was collected for each
variable. This was based on the assumption that instruction tracking
could reconstruct the remaining state. However, variables may have
different locations across different address ranges, and relying solely
on instruction tracking can miss valid type information.
Change __die_collect_vars_cb() to iterate over all location entries
using dwarf_getlocations() in a loop. This ensures that variables with
multiple location ranges are properly tracked, improving type coverage.
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a function call occurs, caller-saved registers are typically
invalidated since the callee may clobber them. However, DWARF debug info
provides location ranges that indicate exactly where a variable is valid
in a register.
Track the DWARF location range end address in type_state_reg and use it
to determine if a caller-saved register should be preserved across a
call. If the current call address is within the DWARF-specified lifetime
of the variable, keep the register state valid instead of invalidating
it.
This improves type annotation for code where the compiler knows a
register value survives across calls (e.g., when the callee is known not
to clobber certain registers or when the value is reloaded after the
call at the same logical location).
Changes:
- Add `end` and `has_range` fields to die_var_type to capture DWARF
location range information
- Add `lifetime_active` and `lifetime_end` fields to type_state_reg
- Check location lifetime before invalidating caller-saved registers
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously, the x86 call handler returned early without invalidating
caller-saved registers when the call target symbol could not be resolved
(func == NULL). This violated the ABI which requires caller-saved
registers to be considered clobbered after any call instruction.
Fix this by:
1. Always invalidating caller-saved registers for any call instruction
(except __fentry__ which preserves registers)
2. Using dl->ops.target.name as fallback when func->name is unavailable,
allowing return type lookup for more call targets
This is a conservative change that may reduce type coverage for indirect
calls (e.g., callq *(%rax)) where we cannot determine the return type
but it ensures correctness.
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a helper function to consistently invalidate register state instead
of field assignments. This ensures kind, ok, and copied_from are all
properly cleared when a register becomes invalid.
The helper sets:
- kind = TSR_KIND_INVALID
- ok = false
- copied_from = -1
Replace all invalidation patterns with calls to this helper. No
functional change and this removes some incorrect annotations that were
caused by incomplete invalidation (e.g. a obsolete copied_from from an
invalidated register).
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a register holds a constant value (TSR_KIND_CONST) and is used with
a negative offset, treat it as a potential global variable access
instead of falling through to CFA (frame) handling.
This fixes cases like array indexing with computed offsets:
movzbl -0x7d72725a(%rax), %eax # array[%rax]
Where %rax contains a computed index and the negative offset points to a
global array. Previously this fell through to the CFA path which doesn't
handle global variables, resulting in "no type information".
The fix redirects such accesses to check_kernel which calls
get_global_var_type() to resolve the type from the global variable
cache. This is only done for kernel DSOs since the pattern relies on
kernel-specific global variable resolution. We could also treat
registers with integer types to the global variable path, but this
requires more changes.
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously, global_var__collect() required get_global_var_info() to
succeed (i.e., the variable must have a symbol name) before caching a
global variable. This prevented variables that exist in DWARF but lack
symbol table coverage from being cached.
Remove the symbol table requirement since DW_OP_addr already provides
the variable's address directly from DWARF. The symbol table lookup is
now optional to obtain the variable name when available.
Also remove the var_offset != 0 check, which was intended to skip
variables where the access address doesn't match the symbol start. The
symbol table lookup is now optional and I found removing this check has
no effect on the annotation results for both kernel and userspace
programs.
Test results show improved annotation coverage especially for userspace
programs with RIP-relative addressing instructions.
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a struct member is an array type, die_get_member_type() would stop
iterating since array types weren't handled in the loop. This caused
accesses to array elements within structs to not resolve properly.
Add array type handling by resolving the array to its element type and
calculating the offset within an element using modulo arithmetic
This improves type annotation coverage for struct members that are
arrays.
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When comparing types from different scopes, first compare their type
offsets. A larger offset means the field belongs to an outer (enclosing)
struct. This helps resolve cases where a pointer is found in an inner
scope, but a struct containing that pointer exists in an outer scope.
Previously, is_better_type would prefer the pointer type, but the struct
type is actually more complete and should be chosen.
Prefer types from outer scopes when is_better_type cannot determine a
better type. This is a heuristic for the case `struct A { struct B; }`
where A and B have the same size but I think in most cases A is in the
outer scope and should be preferred.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Both die_find_variable_by_reg and die_find_variable_by_addr call
match_var_offset which already performs sufficient checking and type
matching. The additional check_variable call is redundant, and its
need_pointer logic is only a heuristic. Since DWARF encodes accurate
type information, which match_var_offset verifies, skipping
check_variable improves both coverage and accuracy.
Return the matched type from die_find_variable_by_reg and
die_find_variable_by_addr via the existing `type` field in
find_var_data, removing the need for check_variable in
find_data_type_die.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Preserve typedefs in match_var_offset to match the results by
__die_get_real_type. Also move the (offset == 0) branch after the
is_pointer check to ensure the correct type is used, fixing cases where
an incorrect pointer type was chosen when the access offset was 0.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a variable type is wrapped in typedef/qualifiers, callers may need
to first resolve it to the underlying DW_TAG_pointer_type or
DW_TAG_array_type. A simple tag check is not enough and directly calling
__die_get_real_type() can stop at the pointer type (e.g. typedef ->
pointer) instead of the pointee type.
Add die_get_pointer_type() helper that follows typedef/qualifier chains
and returns the underlying pointer DIE. Use it in annotate-data.c so
pointer checks and dereference work correctly for typedef'd pointers.
Signed-off-by: Zecheng Li <zli94@ncsu.edu>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add driver for the ESWIN PCIe Root Complex based on the DesignWare PCIe
core, IP revision 5.96a. The PCIe Gen.3 Root Complex supports data rate of
8 GT/s and x4 lanes, with INTx and MSI interrupt capability.
Signed-off-by: Yu Ning <ningyu@eswincomputing.com>
Signed-off-by: Yanghui Ou <ouyanghui@eswincomputing.com>
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
[mani: renamed "EIC7700" to "ESWIN", added maintainers entry, removed async probe]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add driver tag in subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260227111808.1996-1-zhangsenchuan@eswincomputing.com
Add Device Tree binding documentation for the ESWIN PCIe Root Complex. The
Root Complex is based on Synopsys Designware PCIe IP.
Signed-off-by: Yu Ning <ningyu@eswincomputing.com>
Signed-off-by: Yanghui Ou <ouyanghui@eswincomputing.com>
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
[mani: Renamed 'EIC7700' to 'ESWIN']
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add driver tag in subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260227111732.1979-1-zhangsenchuan@eswincomputing.com
When io_should_commit() returns true (eg for non-pollable files), buffer
commit happens at buffer selection time and sel->buf_list is set to
NULL. When __io_put_kbufs() generates CQE flags at completion time, it
calls __io_put_kbuf_ring() which finds a NULL buffer_list and hence
cannot determine whether the buffer was consumed or not. This means that
IORING_CQE_F_BUF_MORE is never set for non-pollable input with
incrementally consumed buffers.
Likewise for io_buffers_select(), which always commits upfront and
discards the return value of io_kbuf_commit().
Add REQ_F_BUF_MORE to store the result of io_kbuf_commit() during early
commit. Then __io_put_kbuf_ring() can check this flag and set
IORING_F_BUF_MORE accordingy.
Reported-by: Martin Michaelis <code@mgjm.de>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1553
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a zero length transfer, io_kbuf_inc_commit() is called with !len.
Since we never enter the while loop to consume the buffers,
io_kbuf_inc_commit() ends up returning true, consuming the buffer. But
if no data was consumed, by definition it cannot have consumed the
buffer. Return false for that case.
Reported-by: Martin Michaelis <code@mgjm.de>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1553
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add tsync_interrupt test to exercise the signal interruption path in
landlock_restrict_sibling_threads(). When a signal interrupts
wait_for_completion_interruptible() while the calling thread waits for
sibling threads to finish credential preparation, the kernel:
1. Sets ERESTARTNOINTR to request a transparent syscall restart.
2. Calls cancel_tsync_works() to opportunistically dequeue task works
that have not started running yet.
3. Breaks out of the preparation loop, then unblocks remaining
task works via complete_all() and waits for them to finish.
4. Returns the error, causing abort_creds() in the syscall handler.
Specifically, cancel_tsync_works() in its entirety, the ERESTARTNOINTR
error branch in landlock_restrict_sibling_threads(), and the
abort_creds() error branch in the landlock_restrict_self() syscall
handler are timing-dependent and not exercised by the existing tsync
tests, making code coverage measurements non-deterministic.
The test spawns a signaler thread that rapidly sends SIGUSR1 to the
calling thread while it performs landlock_restrict_self() with
LANDLOCK_RESTRICT_SELF_TSYNC. Since ERESTARTNOINTR causes a
transparent restart, userspace always sees the syscall succeed.
This is a best-effort coverage test: the interruption path is exercised
when the signal lands during the preparation wait, which depends on
thread scheduling. The test creates enough idle sibling threads (200)
to ensure multiple serialized waves of credential preparation even on
machines with many cores (e.g., 64), widening the window for the
signaler. Deterministic coverage would require wrapping the wait call
with ALLOW_ERROR_INJECTION() and using CONFIG_FAIL_FUNCTION.
Test coverage for security/landlock was 90.2% of 2105 lines according to
LLVM 21, and it is now 91.1% of 2105 lines with this new test.
Cc: Günther Noack <gnoack@google.com>
Cc: Justin Suess <utilityemal77@gmail.com>
Cc: Tingmao Wang <m@maowtm.org>
Cc: Yihan Ding <dingyihan@uniontech.com>
Link: https://lore.kernel.org/r/20260310190416.1913908-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
While very unlikely, local storage theoretically may leak memory of the
size of "struct bpf_local_storage" when destroy() fails to grab
local_storage->lock and initializes selem->local_storage before other
racing map_free() see it. Warn the user to allow debugging the issue
instead of leaking the memory silently.
Note that test_maps in bpf selftests already stress tested
bpf_selem_unlink_nofail() by creating 4096 sockets and then immediately
destroying them in multiple threads. With 64 threads, 64 x 4096 socket
local storages were created and destroyed during the test and no warning
in the function were triggered.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260318224219.615105-1-ameryhung@gmail.com
When updating ->i_size, make sure to always update ->i_blocks as well
until we query new allocation size from the server.
generic/694 was failing because smb3_simple_falloc() was missing the
update of ->i_blocks after calling cifs_setsize(). So, fix this by
updating ->i_blocks directly in cifs_setsize(), so all places that
call it doesn't need to worry about updating ->i_blocks later.
Reported-by: Shyam Prasad N <sprasad@microsoft.com>
Closes: https://lore.kernel.org/r/CANT5p=rqgRwaADB=b_PhJkqXjtfq3SFv41SSTXSVEHnuh871pA@mail.gmail.com
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Some pinctrl devices like mt6397 or mt6392 don't support EINT at all, but
the mtk_eint_init function is always called and returns -ENODEV, which
then bubbles up and causes probe failure.
To address this only call mtk_eint_init if EINT pins are present.
Tested on Xiaomi Mi Smart Clock x04g (mt6392).
Fixes: e46df235b4 ("pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit")
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5 ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid.
Fixes: 371805522f ("bluetooth: hci_uart: add LL protocol serdev driver support")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory.
Link: https://lore.kernel.org/linux-bluetooth/20260315132013.75ab40c5@kernel.org/T/#m1418f9c82eeff8510c1beaa21cf53af20db96c06
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path.
Fixes: aac23bf636 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack.
Fixes: c28d2bff70 ("Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short")
Reported-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b7f3e7d9a596bf6a63e3
Tested-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Signed-off-by: Minseo Park <jacob.park.9436@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When userspace opts into VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2, the
driver may report the VFIO_PRECOPY_INFO_REINIT output flag in response
to the VFIO_MIG_GET_PRECOPY_INFO ioctl, along with a new initial_bytes
value.
The presence of the VFIO_PRECOPY_INFO_REINIT flag indicates to the
caller that new initial data is available in the migration stream.
If the firmware reports a new initial-data chunk, any previously dirty
bytes in memory are treated as initial bytes, since the caller must read
both sets before reaching the end of the initial-data region.
In this case, the driver issues a new SAVE command to fetch the data and
prepare it for a subsequent read() from userspace.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Consider an inflight SAVE operation during the PRE_COPY phase, so the
caller will wait when no data is currently available but is expected
to arrive.
This enables a follow-up patch to avoid returning -ENOMSG while a new
*initial_bytes* chunk is still pending from an asynchronous SAVE command
issued by the VFIO_MIG_GET_PRECOPY_INFO ioctl.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Introduce a core helper function for VFIO_MIG_GET_PRECOPY_INFO and adapt
all drivers to use it.
It centralizes the common code and ensures that output flags are cleared
on entry, in case user opts in to VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2.
This preventing any unintended echoing of userspace data back to
userspace.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Currently, existing VFIO_MIG_GET_PRECOPY_INFO implementations don't
assign info.flags before copy_to_user().
Because they copy the struct in from userspace first, this effectively
echoes userspace-provided flags back as output, preventing the field
from being used to report new reliable data from the drivers.
Add support for a new device feature named
VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2.
On SET, enables the v2 pre_copy_info behaviour, where the
vfio_precopy_info.flags is a valid output field.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
As currently defined, initial_bytes is monotonically decreasing and
precedes dirty_bytes when reading from the saving file descriptor.
The transition from initial_bytes to dirty_bytes is unidirectional and
irreversible.
The initial_bytes are considered as critical data that is highly
recommended to be transferred to the target as part of PRE_COPY, without
this data, the PRE_COPY phase would be ineffective.
We come to solve the case when a new chunk of critical data is
introduced during the PRE_COPY phase and the driver would like to report
an entirely new value for the initial_bytes.
For that, we extend the VFIO_MIG_GET_PRECOPY_INFO ioctl with an output
flag named VFIO_PRECOPY_INFO_REINIT to allow drivers reporting a new
initial_bytes value during the PRE_COPY phase.
Currently, existing VFIO_MIG_GET_PRECOPY_INFO implementations don't
assign info.flags before copy_to_user(), this effectively echoes
userspace-provided flags back as output, preventing the field from being
used to report new reliable data from the drivers.
Reliable use of the new VFIO_PRECOPY_INFO_REINIT flag requires userspace
to explicitly opt in by enabling the
VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2 device feature.
When the caller opts in, the driver may report an entirely new
value for initial_bytes. It may be larger, it may be smaller, it may
include the previous unread initial_bytes, it may discard the previous
unread initial_bytes, up to the driver logic and state.
The presence of the VFIO_PRECOPY_INFO_REINIT output flag set by the
driver indicates that new initial data is present on the stream.
Once the caller sees this flag, the initial_bytes value should be
re-evaluated relative to the readiness state for transition to
STOP_COPY.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
C does not permit an initialiser expression on a variable-length array
(C99 Section 6.7.9 constraint: "The type of the entity to be initialized
shall not be a variable length array type").
vfio_pci_irq_set() declared:
u8 buf[sizeof(struct vfio_irq_set) + sizeof(int) * count] = {};
where `count` is a runtime function parameter, making `buf` a VLA.
GCC rejects this with (tried with GCC-9.4.0):
error: variable-sized object may not be initialized
Fix by removing the `= {}` initialiser and inserting an explicit
memset() immediately after the declaration. memset() on a VLA is
perfectly legal and achieves the same zero-initialisation on all
conforming C implementations.
Fixes: 19faf6fd96 ("vfio: selftests: Add a helper library for VFIO selftests")
Cc: stable@vger.kernel.org
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Manish Honap <mhonap@nvidia.com>
Link: https://lore.kernel.org/r/20260317051402.3725670-1-mhonap@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The file contains a spelling error in a source comment (succes).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'succes' with 'success' in the affected comment. This is a
comment-only cleanup and does not change behavior.
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Link: https://lore.kernel.org/r/20260316185617.166414-1-joseph.salisbury@oracle.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Replace mtty_dev->vd_class with a const struct class and drop the
class_create() call.
Compile tested and found no errors/warns in dmesg after enabling
CONFIG_VFIO and CONFIG_SAMPLE_VFIO_MDEV_MTTY.
Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260308214939.1215682-1-jkoolstra@xs4all.nl
Signed-off-by: Alex Williamson <alex@shazbot.org>
Currently, local storage may deadlock when deferring freeing selem or
local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace()
in NMI or reentrant. Since deleting selem in NMI is an unlikely use
case, partially mitigate it by returning error when calling from
bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible
to deadlock through reentrant. A full mitigation requires returning
error when irqs_disabled() is true, which, however is too heavy-handed
for bpf_xxx_storage_delete().
The long-term solution requires _nolock versions of call_rcu. Another
possible solution is to defer the free through irq_work [0], but it
would grow the size of selem, which is non-ideal.
The check is only needed in bpf_selem_unlink(), which is used by helpers
and syscalls. bpf_selem_unlink_nofail() is fine as it is called during
map and owner tear down that never run in NMI or reentrant.
[0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/
Fixes: a10787e6d5 ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260319025716.2361065-1-ameryhung@gmail.com
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Lt31
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, Bluetooth and netfilter.
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep"
* tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
MPTCP: fix lock class name family in pm_nl_create_listen_socket
icmp: fix NULL pointer dereference in icmp_tag_validation()
net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths
net: shaper: protect from late creation of hierarchy
net: shaper: protect late read accesses to the hierarchy
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
nfnetlink_osf: validate individual option lengths in fingerprints
netfilter: nf_tables: release flowtable after rcu grace period on error
netfilter: bpf: defer hook memory release until rcu readers are done
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
net/mlx5e: Fix race condition during IPSec ESN update
net/mlx5e: Prevent concurrent access to IPSec ASO context
net/mlx5: qos: Restrict RTNL area to avoid a lock cycle
ipv6: add NULL checks for idev in SRv6 paths
NFC: nxp-nci: allow GPIOs to sleep
net: macb: fix uninitialized rx_fs_lock
net: macb: fix use-after-free access to PTP clock
netdevsim: drop PSP ext ref on forward failure
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
...
Now that GICv5 is supported, it is important to check that all of the
GICv5 register state is hidden from a guest that doesn't create a
vGICv5.
Rename the no-vgic-v3 selftest to no-vgic, and extend it to check
GICv5 system registers too.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://patch.msgid.link/20260319154937.3619520-42-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
This basic selftest creates a vgic_v5 device (if supported), and tests
that one of the PPI interrupts works as expected with a basic
single-vCPU guest.
Upon starting, the guest enables interrupts. That means that it is
initialising all PPIs to have reasonable priorities, but marking them
as disabled. Then the priority mask in the ICC_PCR_EL1 is set, and
interrupts are enable in ICC_CR0_EL1. At this stage the guest is able
to receive interrupts. The architected SW_PPI (64) is enabled and
KVM_IRQ_LINE ioctl is used to inject the state into the guest.
The guest's interrupt handler has an explicit WFI in order to ensure
that the guest skips WFI when there are pending and enabled PPI
interrupts.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-41-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
GICv5 systems will likely not support the full set of PPIs. The
presence of any virtual PPI is tied to the presence of the physical
PPI. Therefore, the available PPIs will be limited by the physical
host. Userspace cannot drive any PPIs that are not implemented.
Moreover, it is not desirable to expose all PPIs to the guest in the
first place, even if they are supported in hardware. Some devices,
such as the arch timer, are implemented in KVM, and hence those PPIs
shouldn't be driven by userspace, either.
Provided a new UAPI:
KVM_DEV_ARM_VGIC_GRP_CTRL => KVM_DEV_ARM_VGIC_USERPSPACE_PPIs
This allows userspace to query which PPIs it is able to drive via
KVM_IRQ_LINE.
Additionally, introduce a check in kvm_vm_ioctl_irq_line() to reject
any PPIs not in the userspace mask.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-40-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that it is possible to create a VGICv5 device, provide initial
documentation for it. At this stage, there is little to document.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-39-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The basic GICv5 PPI support is now complete. Allow probing for a
native GICv5 rather than just the legacy support.
The implementation doesn't support protected VMs with GICv5 at this
time. Therefore, if KVM has protected mode enabled the native GICv5
init is skipped, but legacy VMs are allowed if the hardware supports
it.
At this stage the GICv5 KVM implementation only supports PPIs, and
doesn't interact with the host IRS at all. This means that there is no
need to check how many concurrent VMs or vCPUs per VM are supported by
the IRS - the PPI support only requires the CPUIF. The support is
artificially limited to VGIC_V5_MAX_CPUS, i.e. 512, vCPUs per VM.
With this change it becomes possible to run basic GICv5-based VMs,
provided that they only use PPIs.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://patch.msgid.link/20260319154937.3619520-38-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
This control enables virtual HPPI selection, i.e., selection and
delivery of interrupts for a guest (assuming that the guest itself has
opted to receive interrupts). This is set to enabled on boot as there
is no reason for disabling it in normal operation as virtual interrupt
signalling itself is still controlled via the HCR_EL2.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://patch.msgid.link/20260319154937.3619520-37-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Only the KVM_DEV_ARM_VGIC_GRP_CTRL->KVM_DEV_ARM_VGIC_CTRL_INIT op is
currently supported. All other ops are stubbed out.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-36-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently, NV guests are not supported with GICv5. Therefore, make
sure that FEAT_GCIE is always hidden from such guests.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-35-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
