Handling of a forced link retraining debugfs request via the DP MST HPD
IRQ handler is incorrectly skipped, if the IRQ handler doesn't see any
HPD IRQs raised by the sink. Fix this by ensuring that the request is
always handled (in the Fixes: commit below by directly calling
intel_dp_check_link_state(), later by the same call moved to
intel_dp_handle_link_service_irq()).
Cc: Luca Coelho <luciano.coelho@intel.com>
Fixes: db4855d903 ("drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler")
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260311153152.133744-1-imre.deak@intel.com
If we log the parent directory of a conflicting inode, we are not logging
the new dentries of the directory, so when we finish we have the parent
directory's inode marked as logged but we did not log its new dentries.
As a consequence if the parent directory is explicitly fsynced later and
it does not have any new changes since we logged it, the fsync is a no-op
and after a power failure the new dentries are missing.
Example scenario:
$ mkdir foo
$ sync
$rmdir foo
$ mkdir dir1
$ mkdir dir2
# A file with the same name and parent as the directory we just deleted
# and was persisted in a past transaction. So the deleted directory's
# inode is a conflicting inode of this new file's inode.
$ touch foo
$ ln foo dir2/link
# The fsync on dir2 will log the parent directory (".") because the
# conflicting inode (deleted directory) does not exists anymore, but it
# it does not log its new dentries (dir1).
$ xfs_io -c "fsync" dir2
# This fsync on the parent directory is no-op, since the previous fsync
# logged it (but without logging its new dentries).
$ xfs_io -c "fsync" .
<power failure>
# After log replay dir1 is missing.
Fix this by ensuring we log new dir dentries whenever we log the parent
directory of a no longer existing conflicting inode.
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/182055fa-e9ce-4089-9f5f-4b8a23e8dd91@gmail.com/
Fixes: a3baaf0d78 ("Btrfs: fix fsync after succession of renames and unlink/rmdir")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function `btrfs_relocate_chunk()` always passes verbose=true to
`btrfs_relocate_block_group()` instead of the `verbose` parameter passed
into it by it's callers.
While user initiated rebalancing should be logged in the Kernel's log
buffer. This causes excessive log spamming from automatic rebalancing,
e.g. on zoned filesystems running low on usable space.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After cancel_delayed_work_sync() is called from
xfrm_nat_keepalive_net_fini(), xfrm_state_fini() flushes remaining
states via __xfrm_state_delete(), which calls
xfrm_nat_keepalive_state_updated() to re-schedule nat_keepalive_work.
The following is a simple race scenario:
cpu0 cpu1
cleanup_net() [Round 1]
ops_undo_list()
xfrm_net_exit()
xfrm_nat_keepalive_net_fini()
cancel_delayed_work_sync(nat_keepalive_work);
xfrm_state_fini()
xfrm_state_flush()
xfrm_state_delete(x)
__xfrm_state_delete(x)
xfrm_nat_keepalive_state_updated(x)
schedule_delayed_work(nat_keepalive_work);
rcu_barrier();
net_complete_free();
net_passive_dec(net);
llist_add(&net->defer_free_list, &defer_free_list);
cleanup_net() [Round 2]
rcu_barrier();
net_complete_free()
kmem_cache_free(net_cachep, net);
nat_keepalive_work()
// on freed net
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync().
Fixes: f531d13bdf ("xfrm: support sending NAT keepalives in ESP in UDP states")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously the UART rely on external bootloader to initialize clock,
pinctrl and reset, to solve this, explicitly adding those resource in
Device Tree, so UART driver will handle them properly.
Link: https://lore.kernel.org/r/20260304-01-dts-uart-full-v1-4-50a0aa53a245@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
The UART of SpacemiT K3 SoC has same clock property as K1 generation which
request two clock sources, fix the binding otherwise will get DT check
warnings.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260304-01-uart-clock-names-v1-1-338483f04a8b@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
When the chip does not support top/bottom block protect, the tb_mask
must be set to 0, otherwise SR1 bit5 will be unexpectedly modified.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Fixes: 3dd8012a8e ("mtd: spi-nor: add TB (Top/Bottom) protect support")
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Find two batches mt35xu512aba has different SFDP but with same
jedec ID. The batch which use the new version of SFDP contain
all the necessary information to support OCT DTR mode. The batch
with old version do not contain the OCT DTR command information,
but in fact it did support OCT DTR mode.
Current mt35xu512aba_post_sfdp_fixup() add some setting including
SNOR_CMD_READ_8_8_8_DTR, but still lack SNOR_CMD_PP_8_8_8_DTR. Meet
issue on the batch mt35xu512aba with old SFDP version. Because no
SNOR_CMD_PP_8_8_8_DTR, micron_st_nor_octal_dtr_en() will not be
called, then use SNOR_CMD_READ_8_8_8_DTR will meet issue.
Fixes: 44dd635cd6 ("mtd: spi-nor: micron-st: use SFDP of mt35xu512aba")
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
[pratyush@kernel.org: touch up the comment a bit]
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
After commit 5273cc6df9 ("mtd: spi-nor: core: Call
spi_nor_post_sfdp_fixups() only when SFDP is defined")
spi_nor_post_sfdp_fixups() isn't called anymore if no SFDP is detected.
Update the documentation accordingly.
Fixes: 5273cc6df9 ("mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Leo has been an active contributor and reviewer for CoreSight subsystem for
years. Add him as a Reviewer for CORESIGHT.
Cc: Leo Yan <leo.yan@arm.com>
Acked-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260313102133.2298330-1-suzuki.poulose@arm.com
When check read operation, need to setting the op.dummy.nbytes based
on current read operation rather than the nor->read_proto.
Fixes: 0e30f47232 ("mtd: spi-nor: add support for DTR protocol")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Convert the ISL12026 RTC binding from text format to YAML schema.
Remove the legacy text binding.
The new schema enables dtbs_check validation.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260227185115.174997-1-piyushpatle228@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add the wakeup-source property to the ST1232 touchscreen node in the
device tree so that the touchscreen interrupt can wake the system from
suspend when the panel is touched.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260309000319.74880-3-phucduc.bui@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The lcd2s_print() and lcd2s_gotoxy() functions currently ignore the
return value of lcd2s_i2c_master_send(), which can fail. This can lead
to silent data loss or incorrect cursor positioning.
Add proper error checking: if the number of bytes sent does not match
the expected length, return -EIO; otherwise propagate any error code
from the I2C transfer.
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Armadillo-800EVA board provides an SD card slot and an AWL13 SDIO
interface connected to the SDHI1 controller. Routing between these two
interfaces is controlled by a mechanical DIP switch and a set of
multiplexers.
To support this, add:
- A fixed 3.3V regulator for SDHI1 power, controlled by PORT16 (G2),
- SDHI1 pinmux groups for data, control, and card detection,
- A gpio-hog for PORT6 (J5) to control the SDHI1/AWLAN multiplexer.
PORT176 (N21) is already configured as output-high in this DTS (via
lcd0-mux-hog), routing the SDSLOT2_ENABLE signal to PORT6. Since the
hardware includes an external 10k pull-up resistor (R94) on this line,
PORT6 is configured as an input to allow the physical DIP switch to
determine the routing without SoC interference.
Both configurations have been verified:
- SD card (CON8): detected as mmcblk1, high-speed SDHC,
- SDIO (CON14): detected as mmc1, high-speed SDIO.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260224074532.60046-1-phucduc.bui@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In case the VDD supply voltage regulator of the RTC needs to be
specified explicitly, allow to set vdd-supply.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309085749.25747-2-frieder@fris.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Now that sysfs_create_groups() and sysfs_remove_groups() allow to
pass constant groups arrays, we can constify the groups array argument
also here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8ea2d6d1-0adb-4d7f-92bc-751e93ce08d6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constify the groups array argument where applicable. This allows to
pass constant arrays as arguments.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/17035265-8882-4101-b7a7-16b3eb94f8b5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't access of_root directly as it reduces the build test coverage for
this driver with COMPILE_TEST=y and OF=n. Use existing helper functions
to retrieve the relevant information.
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-soc-of-root-v2-9-b45da45903c8@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a soft reset TPM PWM IP may preserve its internal state from previous
runtime, therefore on a subsequent OS boot and driver probe
"enable_count" value and TPM PWM IP internal channels "enabled" states
may get unaligned. In consequence on a suspend/resume cycle the call "if
(--tpm->enable_count == 0)" may lead to "enable_count" overflow the
system being blocked from entering suspend due to:
if (tpm->enable_count > 0)
return -EBUSY;
Fix the problem by counting the enabled channels in probe function.
Signed-off-by: Viorel Suman (OSS) <viorel.suman@oss.nxp.com>
Fixes: 738a1cfec2 ("pwm: Add i.MX TPM PWM driver support")
Link: https://patch.msgid.link/20260311123309.348904-1-viorel.suman@oss.nxp.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Enable the configurations needed for Aquila AM69 SoM and compatible
carrier boards.
- CONFIG_SENSORS_AMC6821, needed for the fan controller on the clover
and dev carrier board (as module).
- CONFIG_POWER_RESET_GPIO and CONFIG_POWER_RESET_GPIO_RESTART needed
for poweroff and restart functionalities (as built-in, it's not
possible to set them as 'm').
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260306153130.102972-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
snprintf() returns the number of characters that would have been
written excluding the NUL terminator. Output is truncated when the
return value is >= the buffer size, not just > the buffer size.
When ret == size, the current code takes the non-truncated path,
advancing buf by ret and reducing size to 0. This is wrong because
the output was actually truncated (the last character was replaced by
NUL). Fix by using >= so the truncation path is taken correctly.
Link: https://lore.kernel.org/all/20260312191143.28719-4-objecting@objecting.org/
Fixes: 76db5a27a8 ("bootconfig: Add Extra Boot Config support")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The bounds check for brace_index happens after the array write.
While the current call pattern prevents an actual out-of-bounds
access (the previous call would have returned an error), the
write-before-check pattern is fragile and would become a real
out-of-bounds write if the error return were ever not propagated.
Move the bounds check before the array write so the function is
self-contained and safe regardless of caller behavior.
Link: https://lore.kernel.org/all/20260312191143.28719-3-objecting@objecting.org/
Fixes: ead1e19ad9 ("lib/bootconfig: Fix a bug of breaking existing tree nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The alternate screen support added by commit 23743ba647 ("vt: add
support for smput/rmput escape codes") only saves and restores the
regular screen buffer (vc_origin), but completely ignores the corresponding
unicode screen buffer (vc_uni_lines) creating a messed-up display.
Add vc_saved_uni_lines to save the unicode screen buffer when entering
the alternate screen, and restore it when leaving. Also ensure proper
cleanup in reset_terminal() and vc_deallocate().
Fixes: 23743ba647 ("vt: add support for smput/rmput escape codes")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/5o2p6qp3-91pq-0p17-or02-1oors4417ns7@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pin for GPMC0_CLK.GPIO0_31 at address 0x000F407C is N22 and not M19.
Hence, fix the pin name in the comment to avoid confusion.
Fixes: 8f023012eb ("arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20260309045539.2070793-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Sabrina Dubroca says:
====================
xfrm: fix most sparse warnings
This series fixes most of the sparse warnings currently reported about
RCU pointers for files under net/xfrm. There's no actual bug in the
current code, we only need to use the correct helpers in each context.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use the correct struct member name and function parameter name in
kernel-doc comments.
Move a macro that was between a struct's documentation and its
declaration.
These eliminate the following kernel-doc warnings:
Warning: include/linux/tee_core.h:73 struct member 'c_no_users' not
described in 'tee_device'
Warning: include/linux/tee_core.h:132 #define TEE_DESC_PRIVILEGED
0x1; error: Cannot parse struct or union!
Warning: include/linux/tee_core.h:257 function parameter 'connection_data'
not described in 'tee_session_calc_client_uuid'
Warning: include/linux/tee_core.h:320 function parameter 'teedev'
not described in 'tee_get_drvdata'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Clear the CDNS_MCP_INT_RX_WL interrupt before signaling completion.
This is to prevent the potential race where:
- The main thread is scheduled immediately the completion is signaled,
and starts a new message
- The RX_WL IRQ for this new message happens before sdw_cdns_irq() has
been re-scheduled.
- When sdw_cdns_irq() is re-scheduled it clears the new RX_WL interrupt.
MAIN THREAD | IRQ THREAD
|
_cdns_xfer_msg() |
{ |
write data to FIFO |
wait_for_completion_timeout() |
<BLOCKED> | <---- RX_WL IRQ
| sdw_cdns_irq()
| {
| signal completion
<== RESCHEDULE <==
Handle message completion |
} |
|
Start new message |
_cdns_xfer_msg() |
{ |
write data to FIFO |
wait_for_completion_timeout() |
<BLOCKED> | <---- RX_WL IRQ
==> RESCHEDULE ==>
| // New RX_WL IRQ is cleared before
| // it has been handled.
| clear CDNS_MCP_INTSTAT
| return IRQ_HANDLED;
| }
Before this change, this error message was sometimes seen on kernels
that have large amounts of debugging enabled:
SCP Msg trf timed out
This error indicates that the completion has not been signalled after
500ms.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 956baa1992 ("soundwire: cdns: Add sdw_master_ops and IO transfer support")
Reported-by: Norman Bintang <normanbt@google.com>
Closes: https://issuetracker.google.com/issues/477099834
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260310113133.1707288-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is kernel-doc warning for DRM_XE_VM_BIND_FLAG_DECOMPRESS:
./include/uapi/drm/xe_drm.h:1060: WARNING: Block quote ends without
a blank line; unexpected unindent.
Fix the warning by adding the missing '%' prefix to
DRM_XE_VM_BIND_FLAG_DECOMPRESS in the kernel-doc list entry for
struct drm_xe_vm_bind_op.
Fixes: 2270bd7124 ("drm/xe: add VM_BIND DECOMPRESS uapi flag")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121515.gEMrFlTL-lkp@intel.com/
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260312160244.809849-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
cfg80211_chandef_create() should only be used by bands that are
HT-based and the chantype argument makes sense. Insert a WARN such
that it isn't used on 60GHz and S1GHz bands and to catch any
potential existing uses by those bands.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_chandef_create() is called universally to create the
default chandef during hw registration, however it only really
makes sense to be used for 2GHz, 5GHz, and 6GHz (and by extension
the 'LC' band) as it relies on the channel type which is only
relevant to those specific bands.
To reduce some confusion, create a generic helper for creating the
default chandef that makes sense for all supported bands.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replaces uses of hardcoded register addresses with proper definitions,
for readability.
Signed-off-by: Joshua Peisach <jpeisach@ubuntu.com>
Acked-by: Michael Büsch <m@bues.ch>
Link: https://patch.msgid.link/20260307170135.167460-1-jpeisach@ubuntu.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For NPCA, we need to treat the channel request differently
for AP and other interfaces (APs can share NPCA, under the
assumption that userspace will set them up with the same
BSS color.) This is difficult if we have to check against
a chanreq made up from the chanctx, but this isn't a code
path that needs to be highly optimised, so just always use
the (originally) recheck functionality to check against
all users of the chanctx.
Link: https://patch.msgid.link/20260303152641.1a3ff6ead82b.I486f1a94b9a32e0b045815cbbb22679c8cef56e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need to duplicate the macros, just make a generic
one that gets the name prefix to be used, and use that to
create the others. While at it, add the puncturing bitmap
to the trace and simplify the ternary expressions.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303152641.ca32d70055f8.I8138a31ceb75715d928d807554288baccc33cd8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
