Add AtomicFlag type for boolean flags.
Document when AtomicFlag is generally preferable to Atomic<bool>: in
particular, when RMW operations such as xchg()/cmpxchg() may be used
and minimizing memory usage is not the top priority. On some
architectures without byte-sized RMW instructions, Atomic<bool> can be
slower for RMW operations.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260129122622.3896144-2-tomo@aliasing.net
Link: https://patch.msgid.link/20260303201701.12204-9-boqun@kernel.org
Atomic pointer support is an important piece of synchronization
algorithm, e.g. RCU, hence provide the support for that.
Note that instead of relying on atomic_long or the implementation of
`Atomic<usize>`, a new set of helpers (atomic_ptr_*) is introduced for
atomic pointer specifically, this is because ptr2int casting would
lose the provenance of a pointer and even though in theory there are a
few tricks the provenance can be restored, it'll still be a simpler
implementation if C could provide atomic pointers directly. The side
effects of this approach are: we don't have the arithmetic and logical
operations for pointers yet and the current implementation only works
on ARCH_SUPPORTS_ATOMIC_RMW architectures, but these are implementation
issues and can be added later.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20260120140503.62804-3-boqun.feng@gmail.com
Link: https://patch.msgid.link/20260303201701.12204-8-boqun@kernel.org
Currently, since all the architectures that support Rust all have
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW selected, the helpers of atomic
load/store on i8 and i16 relies on CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y.
It's generally fine since most of architectures support that.
The plan for CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=n architectures is adding
their (probably lock-based) atomic load/store for i8 and i16 as their
atomic_{read,set}() and atomic64_{read,set}() counterpart when they
plans to support Rust.
Hence use a statis_assert!() to check this and remind the future us the
need of the helpers. This is more clear than the #[cfg] on impl blocks
of i8 and i16.
Suggested-by: Dirk Behme <dirk.behme@gmail.com>
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260120140503.62804-2-boqun.feng@gmail.com
Link: https://patch.msgid.link/20260303201701.12204-7-boqun@kernel.org
Originally, `Atomic::from_ptr()` requires `T` being a `Sync` because I
thought having the ability to do `from_ptr()` meant multiplle
`&Atomic<T>`s shared by different threads, which was identical (or
similar) to multiple `&T`s shared by different threads. Hence `T` was
required to be `Sync`. However this is not true, since `&Atomic<T>` is
not the same at `&T`. Moreover, having this bound makes `Atomic::<*mut
T>::from_ptr()` impossible, which is definitely not intended. Therefore
remove the `T: Sync` bound.
[boqun: Fix title typo spotted by Alice & Gary]
Fixes: 29c32c405e ("rust: sync: atomic: Add generic atomics")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260120115207.55318-2-boqun.feng@gmail.com
Link: https://patch.msgid.link/20260303201701.12204-2-boqun@kernel.org
Correct or add the missing function parameter kernel-doc comments
to avoid warnings:
Warning: include/asm-generic/futex.h:38 function parameter 'op' not
described in 'futex_atomic_op_inuser_local'
Warning: include/asm-generic/futex.h:38 function parameter 'oparg' not
described in 'futex_atomic_op_inuser_local'
Warning: include/asm-generic/futex.h:38 function parameter 'oval' not
described in 'futex_atomic_op_inuser_local'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260304005008.409858-1-rdunlap@infradead.org
Regenerate enum_defs.autogen.h from the current vmlinux.h to pick up
new SCX enums added in the for-7.1 cycle.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Extract the inline bpf_program__assoc_struct_ops() call in SCX_OPS_LOAD()
into a __scx_ops_assoc_prog() helper and wrap it with a libbpf >= 1.7
version guard. bpf_program__assoc_struct_ops() was added in libbpf 1.7;
the guard provides a no-op fallback for older versions. Add the
<bpf/libbpf.h> include needed by the helper, and fix "assumming" typo in
a nearby comment.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_bpf_select_cpu_and() is now an inline wrapper so
bpf_ksym_exists(scx_bpf_select_cpu_and) no longer works. Add
__COMPAT_HAS_scx_bpf_select_cpu_and macro that checks for either the
struct args type (new) or the compat ksym (old) to test availability.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Sync the following changes from the scx repo:
- Guard __arena define with #ifndef to avoid redefinition when the
attribute is already defined by another header.
- Add bpf_arena_reserve_pages() and bpf_arena_mapping_nr_pages() ksym
declarations.
- Rename TEST to SCX_BPF_UNITTEST to avoid collision with generic TEST
macros in other projects.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The __has_include guard for sdt_task_defs.h is vestigial — the only
remaining content is the bpf_arena_common.h include which is available
unconditionally. Remove the dead guard.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
This reverts commit 9adfcef334.
dsq->nr is protected by dsq->lock and reading while holding the lock doesn't
constitute a racy read.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: zhidao su <suzhidao@xiaomi.com>
- Fix SEV guest boot failures in certain circumstances, due
to very early code relying on a BSS-zeroed variable that
isn't actually zeroed yet an may contain non-zero bootup
values. Move the variable into the .data section go gain
even earlier zeroing.
- Expose & allow the IBPB-on-Entry feature on SNP guests,
which was not properly exposed to guests due to initial
implementational caution.
- Fix O= build failure when CONFIG_EFI_SBAT_FILE is using
relative file paths.
- 4 commits to fix the various SNC (Sub-NUMA Clustering)
topology enumeration bugs/artifacts (sched-domain build
errors mostly). SNC enumeration data got more complicated
with Granite Rapids X (GNR) and Clearwater Forest X (CWF),
which exposed these bugs and made their effects more
serious.
- Also use the now sane(r) SNC code to fix resctrl SNC
detection bugs.
- Work around a historic libgcc unwinder bug in the vdso32
sigreturn code (again), which regressed during an overly
aggressive recent cleanup of DWARF annotations.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KlDX
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix SEV guest boot failures in certain circumstances, due to
very early code relying on a BSS-zeroed variable that isn't
actually zeroed yet an may contain non-zero bootup values
Move the variable into the .data section go gain even earlier
zeroing
- Expose & allow the IBPB-on-Entry feature on SNP guests, which
was not properly exposed to guests due to initial implementational
caution
- Fix O= build failure when CONFIG_EFI_SBAT_FILE is using relative
file paths
- Fix the various SNC (Sub-NUMA Clustering) topology enumeration
bugs/artifacts (sched-domain build errors mostly).
SNC enumeration data got more complicated with Granite Rapids X
(GNR) and Clearwater Forest X (CWF), which exposed these bugs
and made their effects more serious
- Also use the now sane(r) SNC code to fix resctrl SNC detection bugs
- Work around a historic libgcc unwinder bug in the vdso32 sigreturn
code (again), which regressed during an overly aggressive recent
cleanup of DWARF annotations
* tag 'x86-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/vdso32: Work around libgcc unwinder bug
x86/resctrl: Fix SNC detection
x86/topo: Fix SNC topology mess
x86/topo: Replace x86_has_numa_in_package
x86/topo: Add topology_num_nodes_per_package()
x86/numa: Store extra copy of numa_nodes_parsed
x86/boot: Handle relative CONFIG_EFI_SBAT_FILE file paths
x86/sev: Allow IBPB-on-Entry feature for SNP guests
x86/boot/sev: Move SEV decompressor variables into the .data section
permissive for auxiliary clocks, to not reject syscalls
based on the status field that do not try to modify the
status field. This makes ABI behavior in clock_adjtime()
consistent with CLOCK_REALTIME.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zjov
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Make clock_adjtime() syscall timex validation slightly more permissive
for auxiliary clocks, to not reject syscalls based on the status field
that do not try to modify the status field.
This makes the ABI behavior in clock_adjtime() consistent with
CLOCK_REALTIME"
* tag 'timers-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix timex status validation for auxiliary clocks
PI and setscheduler() syscalls, resulting in kernel warnings
and misbehavior. Found during stress-testing.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vP5l
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a DL scheduler bug that may corrupt internal metrics during PI and
setscheduler() syscalls, resulting in kernel warnings and misbehavior.
Found during stress-testing"
* tag 'sched-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting
Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
is for a monochrome display that has an unusual data format, so the
default value set in mipi_dbi_spi_init() is not correct simply because
this controller is non-standard.
Previously, we were using dbi->swap_bytes to make the same sort of
workaround, but it was removed in the same commit that added
dbi->write_memory_bpw, so we need to use the latter now to have the
correct behavior.
This fixes every 3 columns of pixels being swapped on the display. There
are 3 pixels per byte, so the byte swap caused this effect.
Fixes: df3fb27a74 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260228-drm-mipi-dbi-fix-st7586-byte-swap-v1-1-e78f6c24cd28@baylibre.com
Saves two function calls, and one stac/clac pair.
stac/clac is rather expensive on older cpus like Zen 2.
A synthetic network stress test gives a ~1.5% increase of pps
on AMD Zen 2.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current `dma_read!`, `dma_write!` macros also use a custom
`addr_of!()`-based implementation for projecting pointers, which has
soundness issue as it relies on absence of `Deref` implementation on types.
It also has a soundness issue where it does not protect against unaligned
fields (when `#[repr(packed)]` is used) so it can generate misaligned
accesses.
This commit migrates them to use the general pointer projection
infrastructure, which handles these cases correctly.
As part of migration, the macro is updated to have an improved surface
syntax. The current macro have
dma_read!(a.b.c[d].e.f)
to mean `a.b.c` is a DMA coherent allocation and it should project into it
with `[d].e.f` and do a read, which is confusing as it makes the indexing
operator integral to the macro (so it will break if you have an array of
`CoherentAllocation`, for example).
This also is problematic as we would like to generalize
`CoherentAllocation` from just slices to arbitrary types.
Make the macro expects `dma_read!(path.to.dma, .path.inside.dma)` as the
canonical syntax. The index operator is no longer special and is just one
type of projection (in additional to field projection). Similarly, make
`dma_write!(path.to.dma, .path.inside.dma, value)` become the canonical
syntax for writing.
Another issue of the current macro is that it is always fallible. This
makes sense with existing design of `CoherentAllocation`, but once we
support fixed size arrays with `CoherentAllocation`, it is desirable to
have the ability to perform infallible indexing as well, e.g. doing a `[0]`
index of `[Foo; 2]` is okay and can be checked at build-time, so forcing
falliblity is non-ideal. To capture this, the macro is changed to use
`[idx]` as infallible projection and `[idx]?` as fallible index projection
(those syntax are part of the general projection infra). A benefit of this
is that while individual indexing operation may fail, the overall
read/write operation is not fallible.
Fixes: ad2907b4e3 ("rust: add dma coherent allocator abstraction")
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260302164239.284084-4-gary@kernel.org
[ Capitalize safety comments; slightly improve wording in doc-comments.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a generic infrastructure for performing field and index projections on
raw pointers. This will form the basis of performing I/O projections.
Pointers manipulations are intentionally using the safe wrapping variants
instead of the unsafe variants, as the latter requires pointers to be
inside an allocation which is not necessarily true for I/O pointers.
This projection macro protects against rogue `Deref` implementation, which
can causes the projected pointer to be outside the bounds of starting
pointer. This is extremely unlikely and Rust has a lint to catch this, but
is unsoundness regardless. The protection works by inducing type inference
ambiguity when `Deref` is implemented.
This projection macro also stops projecting into unaligned fields (i.e.
fields of `#[repr(packed)]` structs), as misaligned pointers require
special handling. This is implemented by attempting to create reference to
projected field inside a `if false` block. Despite being unreachable, Rust
still checks that they're not unaligned fields.
The projection macro supports both fallible and infallible index
projections. These are described in detail inside the documentation.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20260302164239.284084-3-gary@kernel.org
[ * Add intro-doc links where possible,
* Fix typos and slightly improve wording, e.g. "as documentation
describes" -> "as the documentation of [`Self::proj`] describes",
* Add an empty line between regular and safety comments, before
examples, and between logically independent comments,
* Capitalize various safety comments.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Two core changes and the rest in drivers, one core change to quirk the
behaviour of the Iomega Zip drive and one to fix a hang caused by tag
reallocation problems, which has mostly been seen by the iscsi client.
Note the latter fixes the problem but still has a slight sysfs memory
leak, so will be amended in the next pull request (once we've run the
fix for the fix through our testing).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaaxT0hsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVmDwD+P17JCAk+Ju0aNSnjEmIjUC2oI1S+9GdO
thbkK99vClABAOOkDvHopBBhfsilTpHBYjWFM34vC/iiaO/xfgd9YH2A
=kIDx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes and the rest in drivers, one core change to quirk the
behaviour of the Iomega Zip drive and one to fix a hang caused by tag
reallocation problems, which has mostly been seen by the iscsi client.
Note the latter fixes the problem but still has a slight sysfs memory
leak, so will be amended in the next pull request (once we've run the
fix for the fix through our testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix recursive locking in __configfs_open_file()
scsi: devinfo: Add BLIST_SKIP_IO_HINTS for Iomega ZIP
scsi: mpi3mr: Clear reset history on ready and recheck state after timeout
scsi: core: Fix refcount leak for tagset_refcnt
Add a `KnownSize` trait which is used obtain a size from a raw pointer's
metadata. This makes it possible to obtain size information on a raw slice
pointer. This is similar to Rust `core::mem::size_of_val_raw` which is not
yet stable.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20260302164239.284084-2-gary@kernel.org
[ Fix wording in doc-comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Valentine reports that their guests fail to boot correctly, losing
interrupts, and indicates that the wrong interrupt gets deactivated.
What happens here is that if the maintenance interrupt is slow enough
to kick us out of the guest, extra interrupts can be activated from
the LRs. We then exit and proceed to handle EOIcount deactivations,
picking active interrupts from the AP list. But we start from the
top of the list, potentially deactivating interrupts that were in
the LRs, while EOIcount only denotes deactivation of interrupts that
are not present in an LR.
Solve this by tracking the last interrupt that made it in the LRs,
and start the EOIcount deactivation walk *after* that interrupt.
Since this only makes sense while the vcpu is loaded, stash this
in the per-CPU host state.
Huge thanks to Valentine for doing all the detective work and
providing an initial patch.
Fixes: 3cfd59f81e ("KVM: arm64: GICv3: Handle LR overflow when EOImode==0")
Fixes: 281c6c06e2 ("KVM: arm64: GICv2: Handle LR overflow when EOImode==0")
Reported-by: Valentine Burley <valentine.burley@collabora.com>
Tested-by: Valentine Burley <valentine.burley@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20260307115955.369455-1-valentine.burley@collabora.com
Link: https://patch.msgid.link/20260307191151.3781182-1-maz@kernel.org
Cc: stable@vger.kernel.org
The serialnr sysfs attribute for CCA cards when queried always
used the default domain for sending the request down to the card.
If for any reason exactly this default domain is disabled then
the attribute code fails to retrieve the CCA info and the sysfs
entry shows an empty string. Works as designed but the serial
number is a card attribute and thus it does not matter which
domain is used for the query. So if there are other domains on
this card available, these could be used.
So extend the code to use AUTOSEL_DOM for the domain value to
address any online domain within the card for querying the cca
info and thus show the serialnr as long as there is one domain
usable regardless of the default domain setting.
Fixes: 8f291ebf32 ("s390/zcrypt: enable card/domain autoselect on ep11 cprbs")
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This reverts commit d8b5cf9c63.
Mikhail Zaslonko reported that linux-next doesn't boot anymore [2]. Reason
for this is recent change [2] was supposed to slightly optimize the irq
entry/exit path by removing some psw bits early in case of an idle exit.
This however is incorrect since irqentry_exit() requires the correct old
psw state at irq entry. Otherwise the embedded regs_irqs_disabled() will
not provide the correct result.
With linux-next and HRTIMER_REARM_DEFERRED this leads to the observed boot
problems, however the commit is broken in any case.
Revert the commit which introduced this.
Thanks to Peter Zijlstra for pointing out that this is a bug in the s390
entry code.
Fixes: d8b5cf9c63 ("s390/irq/idle: Remove psw bits early") [1]
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/r/af549a19-db99-4b16-8511-bf315177a13e@linux.ibm.com/ [2]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260306111919.362559-1-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Silence build error in au1100fb driver found by kernel test robot
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaayLiwAKCRD3ErUQojoP
X1pVAP4/j6LjBX862nFgtxS5XC4YBkpGRLYwO2WJMec+4sO5fQD/ThrowpuzZfPl
FhD/6WtMS4zPCDfNeqIKAo/JySez+w8=
=2Tha
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fix from Helge Deller:
"Silence build error in au1100fb driver found by kernel test robot"
* tag 'fbdev-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: au1100fb: Fix build on MIPS64
Three initial kernel mapping fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaayE4AAKCRD3ErUQojoP
X4U4AQDtHPc9nlM3areu5yTQnOcPTExuEoIpvBm9ktwNCdrwCgEAt4tqv3hhxCvG
/lwb6XBCHfyw3d/AsTRbOIH1MGCnaQQ=
=itGt
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"While testing Sasha Levin's 'kallsyms: embed source file:line info in
kernel stack traces' patch series, which increases the typical kernel
image size, I found some issues with the parisc initial kernel mapping
which may prevent the kernel to boot.
The three small patches here fix this"
* tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix initial page table creation for boot
parisc: Check kernel mapping earlier at bootup
parisc: Increase initial mapping to 64 MB with KALLSYMS
Fix a regression in RCU torture test pre-defined scenarios caused by
commit 7dadeaa6e8 ("sched: Further restrict the preemption modes")
which limits PREEMPT_NONE to architectures that do not support
preemption at all and PREEMPT_VOLUNTARY to those architectures that do
not yet have PREEMPT_LAZY support. Since major architectures (e.g. x86
and arm64) no longer support CONFIG_PREEMPT_NONE and
CONFIG_PREEMPT_VOLUNTARY, using them in rcutorture, rcuscale, refscale,
and scftorture pre-defined scenarios causes config checking errors.
Hence switch these kconfigs to PREEMPT_LAZY.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCAAvFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmmsZu0RHGJvcXVuQGtl
cm5lbC5vcmcACgkQSXnow7UH+rgNWwgAn1bIWDIWQR9CkRQ0grhdO+pPfLusbVg/
Y7H3SsdEX03meSunA/IVGejP6Qbanuab9nyHdv3WxxowpCGYBaLFPvklSfcBWYeZ
4lxi6Fj+2rrzvOnQ54Pk5i4v5VayxEo12XBIgx6HDV7+5LgWk0gU0LpWPUhEWYYR
z/zJ/XbcLr8e9tZVwAWZj/ShLUH301razC2SaR/OlS93zqRG9Sd251Knjqq/lEwI
T6RZfhT2Wz3bgqU3QcjxDWw5dhB0/Y9wKoJjx4bB9m8lnSt+o96gH40TO+lnllnS
T4OHjqK1J1fUXNLzQufyfKKAiwi/LBBc9H4pe4tiLFxg0fg5s21flQ==
=NBys
-----END PGP SIGNATURE-----
Merge tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU selftest fixes from Boqun Feng:
"Fix a regression in RCU torture test pre-defined scenarios caused by
commit 7dadeaa6e8 ("sched: Further restrict the preemption modes")
which limits PREEMPT_NONE to architectures that do not support
preemption at all and PREEMPT_VOLUNTARY to those architectures that do
not yet have PREEMPT_LAZY support.
Since major architectures (e.g. x86 and arm64) no longer support
CONFIG_PREEMPT_NONE and CONFIG_PREEMPT_VOLUNTARY, using them in
rcutorture, rcuscale, refscale, and scftorture pre-defined scenarios
causes config checking errors.
Switch these kconfigs to PREEMPT_LAZY"
* tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
scftorture: Update due to x86 not supporting none/voluntary preemption
refscale: Update due to x86 not supporting none/voluntary preemption
rcuscale: Update due to x86 not supporting none/voluntary preemption
rcutorture: Update due to x86 not supporting none/voluntary preemption
Since commit b5daf93b80 ("firmware: arm_scmi: Avoid notifier
registration for unsupported events") the call chains leading to the helper
__scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to
get an handler for the requested event key, while the current helper can
still return a NULL when no handler could be found or created.
Fix by forcing an ERR_PTR return value when the handler reference is NULL.
Fixes: b5daf93b80 ("firmware: arm_scmi: Avoid notifier registration for unsupported events")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <20260305131011.541444-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
A device_node reference obtained from the device tree is not released
on all error paths in the arm_scpi probe path. Specifically, a node
returned by of_parse_phandle() could be leaked when the probe failed
after the node was acquired. The probe function returns early and
the shmem reference is not released.
Use __free(device_node) scope-based cleanup to automatically release
the reference when the variable goes out of scope.
Fixes: ed7ecb8839 ("firmware: arm_scpi: Add compatibility checks for shmem node")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Message-Id: <20260121-arm_scpi_2-v2-1-702d7fa84acb@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Previously only the first node column showed "NODE 0" while subsequent
columns showed just the bare node number, making it unclear what the
numbers refer to.
Add the "NODE" prefix to all node columns and remove the now-unnecessary
first/else branching.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
On larger machines with many CPUs, max_active values such as 2048
exceed the hardcoded minimum field width of 3 characters, causing the
header and data columns to misalign.
Widen the format specifiers to accommodate 4-digit values and
right-align each nr/max as a single string to keep the output compact.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove the backslash separator between the workqueue name and the
data columns in the "Unbound workqueue -> node_nr/max_active" header
for cleaner output.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
ffa7ae0724 ("sched_ext: Add reenq_flags plumbing to scx_bpf_dsq_reenq()")
introduced task_should_reenq() as a filter inside reenq_local(), requiring
SCX_REENQ_ANY to be set in order to match any task. scx_bpf_dsq_reenq()
handles this correctly by converting a bare reenq_flags=0 to SCX_REENQ_ANY,
but scx_bpf_reenqueue_local() was not updated and continued to call
reenq_local() with 0, causing it to silently reenqueue zero tasks.
Fix by passing SCX_REENQ_ANY directly.
Fixes: ffa7ae0724 ("sched_ext: Add reenq_flags plumbing to scx_bpf_dsq_reenq()")
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix possible NULL pointer dereference in trace_data_alloc()
On the error path in trace_data_alloc(), it can call trigger_data_free()
with a NULL pointer. This use to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue is
that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
Will only enable sched_waking where as:
trace_event=sched_switch,sched_waking
Will enable both.
The bootconfig makes it even worse as the second way is the more common
method.
The issue is that a temporary buffer is used to store the events to enable
later in boot. Each time the cmdline callback is called, it overwrites
what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size parameter
in the command line code causing overflow issues if more that 2G is
specified.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaaxEIRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn+QAQCM6aJm0ZqDD2dM262M1mQpkU7sW3Dz
hZfBpo3YlH55fQEAklsaD96+yKN7PLl1Vh4c0zCelMHZA7kgck/3GqaFAgA=
=rn/Z
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible NULL pointer dereference in trace_data_alloc()
On the trace_data_alloc() error path, it can call trigger_data_free()
with a NULL pointer. This used to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue
is that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
will only enable sched_waking whereas:
trace_event=sched_switch,sched_waking
will enable both.
The bootconfig makes it even worse as the second way is the more
common method.
The issue is that a temporary buffer is used to store the events to
enable later in boot. Each time the cmdline callback is called, it
overwrites what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size
parameter in the command line code causing overflow issues if more
that 2G is specified.
* tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix trace_buf_size= cmdline parameter with sizes >= 2G
tracing: Fix enabling multiple events on the kernel command line and bootconfig
tracing: Add NULL pointer check to trigger_data_free()
In Tegra264, different components from memory subsystems like Memory
Controller Fabric (MCF), HUB, HUB Common (HUBC), Side Band Shim (SBS)
and channels have different interrupt lines for receiving memory
controller error interrupts.
Add support for logging memory controller errors reported by these
memory subsystems on Tegra264 by:
- Renaming tegra_mc_error_names array to tegra20_mc_error_names
because it has a different bit index for error names compared to
Tegra264.
- Defining the intmask registers and mask values supported for
Tegra264.
- Registering interrupt handlers for interrupts associated with these
different MC components which read the interrupt status registers to
determine the type of violation that occurred.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-7-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a new structure for the intmask register e.g. MC_INTMASK_0 and
it's mask value. Add an array of these new structures to prepare for
supporting multiple intmask registers. This is done in preparation for
adding support for Tegra264 which supports multiple intmask registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-6-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Introduce new SoC specific fields in tegra_mc_soc struct for high
address mask and error status type mask because Tegra264 has different
values for these than the existing devices. Error status registers
e.g. MC_ERR_STATUS_0 has few bits which indicate the type of the
error. In order to obtain such type of error from error status
register, we use error status type mask. Similarly, these error status
registers have bits which indicate the higher address bits of the
address responsible for mc error. In order to obtain such higher
address, we use high address mask. Make this change to prepare for
adding MC interrupt support for Tegra264.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-5-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support to handle multiple MC interrupts lines, as supported by
Tegra264. Turn the single IRQ handler callback into a counted array to
allow specifying a separate handler for each interrupt. Move IRQ
handlers into tegra_mc_soc struct, so as to specify SoC specific
values.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-4-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The current register definitions are not in sorted order. Sort these
registers according to their address. Put bit fields and masks of the
corresponding registers below the register definitions to clearly
identify which fields belongs to which registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-3-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Group MC error related registers into a struct as they could have SoC
specific values. Tegra264 has different register offsets than the
existing devices and so in order to add support for Tegra264 we need to
first make this change.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-2-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The "|| echo -lzstd" default makes zstd an unconditional link
dependency of resolve_btfids. On systems where libzstd-dev is not
installed and pkg-config fails, the linker fails:
ld: cannot find -lzstd: No such file or directory
libzstd is a transitive dependency of libelf, so the -lzstd flag is
strictly necessary only for static builds [1].
Remove ZSTD_LIBS variable, and instead set LIBELF_LIBS depending on
whether the build is static or not. Use $(HOSTPKG_CONFIG) as primary
source of the flags list.
Also add a default value for HOSTPKG_CONFIG in case it's not built via
the toplevel Makefile. Pass it from selftests/bpf too.
[1] https://lore.kernel.org/bpf/4ff82800-2daa-4b9f-95a9-6f512859ee70@linux.dev/
Reported-by: BPF CI Bot (Claude Opus 4.6) <bot+bpf-ci@kernel.org>
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Closes: https://lore.kernel.org/bpf/aaWqMcK-2AQw5dx8@altlinux.org/
Fixes: 4021848a90 ("selftests/bpf: Pass through build flags to bpftool and resolve_btfids")
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260305014730.3123382-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- aht10: Fix initialization commands for AHT20
- emc1403: correct a malformed email address
- it87: Check the it87_lock() return value
- max6639: fix inverted polarity
- macsmc: Fix overflows, underflows, sign extension, and other problems
- pmbus/q54sj108a2: fix stack overflow in debugfs read
- Drop support for SMARC-sAM67 (discontinued and never released to market)
-----BEGIN PGP SIGNATURE-----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=+l89
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix initialization commands for AHT20
- Correct a malformed email address (emc1403)
- Check the it87_lock() return value
- Fix inverted polarity (max6639)
- Fix overflows, underflows, sign extension, and other problems in
macsmc
- Fix stack overflow in debugfs read (pmbus/q54sj108a2)
- Drop support for SMARC-sAM67 (discontinued and never released to
market)
* tag 'hwmon-for-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
hwmon: (max6639) fix inverted polarity
dt-bindings: hwmon: sl28cpld: Drop sa67mcu compatible
hwmon: (it87) Check the it87_lock() return value
Revert "hwmon: add SMARC-sAM67 support"
hwmon: (aht10) Fix initialization commands for AHT20
hwmon: (emc1403) correct a malformed email address
hwmon: (macsmc) Fix overflows, underflows, and sign extension
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
MPI firmware state was returned as 0. Get MPI FW state to proceed with
flash image validation.
A new sysfs node 'mpi_fw_state' is added to report MPI firmware state:
/sys/class/scsi_host/hostXX/mpi_fw_state
Fixes: d74181ca11 ("scsi: qla2xxx: Add bsg interface to support firmware img validation")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260305093337.2007205-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Pixel 6 (and Pro), a MAX77759 companion PMIC for USB Type-C
applications is used, which contains four functional blocks (at
distinct I2C addresses):
* top (including GPIO & NVMEM)
* charger
* fuel gauge
* TCPCi
This change adds the fuel gauge.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-dts-v2-1-12f1109a6fee@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
